Develop Bugs

Pls HELP - I broke my phone..

First sorry for bad english, but I realy need help (( So I try to root my phone, but in CWM i wipe everythig, and when I restart the phone it show me this: http://prikachi.com/images/878/6816878a.jpg
Here my only option is to log on CWM, as pressed power button. However, how to install something from CWM after I have wipe everything on the phone (
So I found this http://forum.xda-developers.com/showthread.php?t=2010624 , and do what he say - step by step. But when I finished the installation, the phone looks like this: http://prikachi.com/images/789/6817789c.jpg
A computer gives this error: http://prikachi.com/images/790/6817790K.jpg
When I reboot the phone again looks like this:
http://prikachi.com/images/878/6816878a.jpg
Pls tell me what to do? (

After rebooting, press volume up and wait for 5 secs... after that, power off your phone(hold and keep pressing the power button for 15 to 20 secs) till your phone completely powers off... then switch it on as normal(press and hold the power button untill you see the LG logo). It happened for me also once and this is how, I solved it....Hope this helps....

cooljay5 said:
After rebooting, press volume up and wait for 5 secs... after that, power off your phone(hold and keep pressing the power button for 15 to 20 secs) till your phone completely powers off... then switch it on as normal(press and hold the power button untill you see the LG logo). It happened for me also once and this is how, I solved it....Hope this helps....
Click to expand...
Click to collapse
not help

nexus bootloader will be an issue to go back to stock.
safest bet is learn adb
after that from cwm use
adb push romname.zip /sdcard/0/
wait and you will have file on your phone.

Im not sure its issue with nexus bootloader... Try to load rom thro adb sideload.. If that doesn't help then use lg support tool...!!
Sent from my LG-E975 powering Stock 4.1.2

So many people having this issue.. U think it is nexus bootloader problem??? I also see u have the kdz updater and not the lg flashtool? Maybe it's not the bootloader maybe it's the app for flashing kdz??
Sent from my Optimus G using Tapatalk

davevinci said:
So many people having this issue.. U think it is nexus bootloader problem??? I also see u have the kdz updater and not the lg flashtool? Maybe it's not the bootloader maybe it's the app for flashing kdz??
Sent from my Optimus G using Tapatalk
Click to expand...
Click to collapse
Ok, maybe you're right.
Pls give me link to working lg flashtool.
Аnd in each case pls give me link to adb sideload.
10x!!!

weekend coming ill confirm you guys that it is when you had nexus bootloader that you cant go back stock without hickups!

Now the battery is gone. The phone does not respond at all and doesn't want to charge the battery, what to do??? (((

zepir said:
Now the battery is gone. The phone does not respond at all and doesn't want to charge the battery, what to do??? (((
Click to expand...
Click to collapse
What are u doing with ur phone???
Sent from my Optimus G using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:50 AM ----------
I think it wont charge because u dont have a working kernel in it???
Sent from my Optimus G using Tapatalk

Ok, the phone is in download mode again. Can I try to flash with Odin3? And what are the settings? What file to use for flash with Odin3?

zepir said:
Ok, the phone is in download mode again. Can I try to flash with Odin3? And what are the settings? What file to use for flash with Odin3?
Click to expand...
Click to collapse
odin, this is not samsung we are using buddy

atifsh said:
weekend coming ill confirm you guys that it is when you had nexus bootloader that you cant go back stock without hickups!
Click to expand...
Click to collapse
here you go i can confirm ... this is on f180 flashed and working as e975
1: new freegee does flashes nexus bootloader
2: after using freegee, cant boot to existing OS only way is to flash custom / cm roms
3: using kdz updater actually do revert to bootloader and to fix that is to unplug----- poweroff phone ---- press both volume keys + plugin (aka download mode)... flash will now resume and finishes without any further issues
4: using older version of freegee still works and doesnt have these issues... im proving my saved version 1.2.2.

[Q] Is my Smartphone Canvas 4 Bricked?

I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?

flash stock rom using flash tool
Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
use sp tool and flash coustom rom

raj1988 said:
use sp tool and flash coustom rom
Click to expand...
Click to collapse
Thanksfor taking time to respond.
The problem is im a little less able to be called a developer. I tried searching it but didnt got an original Rom, the one micromax uses. It would be very helpfull if u post a link. I'll manage to download sp flash tools on my own.

you get it from below link
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse

raj1988 said:
Ronald Stefinson said:
Thanksfor taking time to respond.
The problem is im.
http://forum.xda-developers.com/canvas-4/general/micromax-canvas-4-a210-t2453846
go to this link an there you find blog link which have sp flash tool link
original stock rom
and how to flash it
good luck bro
Click to expand...
Click to collapse
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse

try follows option
first you have done little research about the app
if you have cwm try to go to recovery and factory reset device and wipe data
but may be you didn't install than try this you say that canvas 4 logo seen hence may be you are able to get into recovey
press and hold vol up down and power keynow u see recovery mode and factory mode
press vol up key for go to recovery mode now see like this
use only vol up for scrolling and go to recovery mode then press vol downnow u see wipe reset menu hare
go to wipe/reset with vol key's5.to select use options keynow reset finish...............
try it and work for you than tell me

Ronald Stefinson said:
I recently rooted my Micromax Canvas 4. After its rooted, it was working flawlessly. further i installed Chaifire 3d. After intalling CF3D drivers from the app, it tried to reboot, but is wnfortunately freezing at canvas 4 logo screen. I need an urgent help.
Is this an Brick case im facing?
How can i Save phone?
Will installing a ROM help?
Click to expand...
Click to collapse
Open your device manager on your pc then plug the phone via USB. After a second or two I new device will pop up on the device manager but will only stay there for a few seconds, right when it appears right click on it and choose properties then drivers, then update driver then (at least on Windows 7) choose browse my computer and use wherever you put the driver files. That will install the driver.
Once the drivers are installed unplug the phone and open the Flash tool on the pc. Click scatter loading. And direct it to the Scatter file of the Rom. Then click download. now plug the phone back in and it should just flash it. When you get the green circle it's done.
---------- Post added at 01:09 PM ---------- Previous post was at 01:04 PM ----------
And no, it's not bricked. Mine did the same thing trying to use Chainfire 3D. If you follow the directions it will work. Oh yeah, the first time you turn it on it may not boot. Just hold the power button and restart again and once the boot screens come up you will see the android is updating apps and it will boot.

help I need help
hi everybody
things are going from bad to worst but i am not giving up.....so need U
as per your post even can can unbrick canvas4 ....
while using sp too; i used format ( to factory format)
now nothing happens ( pressing down Vol +/_ and power ) cant go into recovery
please help.....
will be great full ( have canvas 4 stock rom downloaded)........?

Great news
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE

Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........

Shikhar122 said:
Hey m also facing a similar problem anyone plz help us. My phone is Micromax Canvas 3D. I had installed a custom rom it was working fine but suddenly I thought to factory reset it.......then oh no just the boot logo comes and the phone doesn't starts. I know its not bootloop. It is not even connecting to computer nor the recovery mode is opening... PLZ help if anyone can........
Click to expand...
Click to collapse
why not just flash the stock ROM using Sp flash tool
---------- Post added at 05:41 PM ---------- Previous post was at 05:34 PM ----------
Ronald Stefinson said:
raj1988 said:
downloaded the ROM and im Stuck where usb is not detected. i tried installing different drivers like pdanet, cynus t1 drivers. what should i do? its still searching.
Click to expand...
Click to collapse
manually install MTK65xx VCOM driver. see the video tutorial below for a guide
Click to expand...
Click to collapse

boot loop and no recovery Canvas a310 nitro (no forum for nitro)
I have rooted my Micromax Canvas Nitro A310 using Kingoroot and installed TWRP recovery before. Also I had installed a Custom ROM of Coolpad F1 from needrom<dot>com. There wasnt any problem till now except the auto rotation. Today i formated my sd card and switched off my phone and on reboot it came to boot loop. It is not booting the ROM and also the TWRP recovery. Shows only the first screen and goes off and on to the screen again. As it does not boot to recovery for me to wipe cache and dalvik, I tried to install drivers again to flash recovery using fastboot, but as its on a boot loop problem and its not standing by for me to install drivers, I am totally stuck. Please help me ASAP.
Sorry for the bad English.
Thank you

jjwaiting4u said:
Hi guys and thanks to all those who advised me
There is good news for those who have hard bricked phone ( ie the phone don't even have a boot loader, cant start , nor recognized by PC, or go into recovery.... no red light when connected to charger) , i formated via sptool the bootloader and the phone was totally dead....
most said it not possible to revive it .....its in dead zone..... go to service center and change processor.
the new is for all local micromax , karbonn, spice (chinese brand) phone its simple and cost the least and the service is available for just Rs350/- ( $6/-), that to in under 10mins......
jtag service for just Rs1500/- to 2000/- ( $25 to 30/-) for branded phones
if anyone has problems ( bricking) specially in Goa please do post will direct you to the local guy center..
LESSON LEARNT>>>>>>>>>NEVER GIVE UP
CANVA 4 A210 / BLUE oNE
Click to expand...
Click to collapse
I need a jtag centre to unbrick my Moto e. My location patna

[q] lg optimus g f180s stuck in starting logo: Please help me

HELLO BROTHERS AND FRIEND,
I AM USING LG OPTIMUS G F180S. AFTER UPDATING THE KITKAT VERSION, I WAS TRYING TO DEGRADE IT TO JELLYBEAM FOR ROOTING. AFTER COMPLETION UPGRATION, THE PHONE WAS STUCK IN LOGO MOOD. PLEASE HELP ME TO SOLVE THIS. PLEASE PLEASE PLEASE PLEASE.
pLEASE HELP ME BROTHER'S.
REGARDS IN ADVANCE AND ALWAYS.
CLICKANU

while updating again in download mode, it shows phone not found
clickanu said:
hello brothers and friend,
i am using lg optimus g f180s. After updating the kitkat version, i was trying to degrade it to jellybeam for rooting. After completion upgration, the phone was stuck in logo mood. Please help me to solve this. Please please please please.
Please help me brother's.
Regards in advance and always.
Clickanu
Click to expand...
Click to collapse
please help me
please help me

Now it shows this error (attached) while updating the file again
clickanu said:
please help me
please help me
Click to expand...
Click to collapse
help me please!!!!!!!
Help me please!!!!!
Regards

http://forum.xda-developers.com/showthread.php?t=2010624&page=49
Have you tried this method? Can you connect your phone in download mode?

Please see these attached files
clickanu said:
help me please!!!!!!!
Help me please!!!!!
Regards
Click to expand...
Click to collapse
while try to upgrading kitkat, it shows "extract file error" and after restart "the logo appears only"...see the video.
Please help me !!! Please someone help me dear (
regards..

Thanks for reply
ahmed xperia p said:
http://forum.xda-developers.com/showthread.php?t=2010624&page=49
have you tried this method? Can you connect your phone in download mode?
Click to expand...
Click to collapse
yes, i can connect the phone in download mode...
Regards,

clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
---------- Post added at 11:46 PM ---------- Previous post was at 11:36 PM ----------
clickanu said:
yes, i can connect the phone in download mode...
Regards,
Click to expand...
Click to collapse
What kdz are you trying to flash? Broken kdz file also results in extract error, try downloading some other kdz specific to your phone model.

Please help me out
Ahmed Xperia p said:
Ok relax if you can connect in download mode 90% chances are your phone will be recovered.
Click to expand...
Click to collapse
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,

clickanu said:
Dear Brother,
the link you provided, i couldnt understand. I am almost new user and new in LG. Please help me out, If you tell me the steps, how to solve...then i will be very much grateful to you Brother.
Regards,
Click to expand...
Click to collapse
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot

how do i wipe the phone, cause there is no recovery mode found in my phone
Ahmed Xperia p said:
Just check first post of the given link . It's easy .
---------- Post added at 11:57 PM ---------- Previous post was at 11:52 PM ----------
what i understand is you successfully flashed jelly bean kdz but after that you are stuck in bootloop? If that is the case all you need is to wipe your phone and itll boot
Click to expand...
Click to collapse
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.

Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..

clickanu said:
I dont find any recovery mode in my phone to wipe and reboot...
and why it is not updated to kitkat through kdz, it is shown file extract error....Please help.
Sorry for bothering you.
regards and thanks.
Click to expand...
Click to collapse
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
cooljay5 said:
Pleas switch off your phone. Press volume -- volume down key and press power button together. On screen display you will get option for hard reset your phone, click power button twice, then your phone will boot after 5 to 10 seconds after a hard reset..
Click to expand...
Click to collapse
This is the most easiest way to fix .
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
Click to expand...
Click to collapse
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error

Thanks Seniors...Grateful....to You
Ahmed Xperia p said:
8) If the phone is stuck at the booting up LG/Telco logo, you will need to manually wipe the data partition.
9) Force the phone off by holding the power button for appx 15secs.
10) Put the phone into recovery mode by holding the volume up and home button concurrently, then press the power button. Let go of all the buttons after you see the LG logo on screen for the 2nd time and the screen goes blank thereafter (backlight may still be on). The phone will kind of reboot and then enters recovery mode. Repeat the process if you did not get it the first time.
11) With the phone in Recovery Mode, connect it to the computer, wait for the drivers to load (if doing it for the first time), unzip the wipe batch file downloaded earlier from step (4), double click on wipe.bat to execute the wipe command.
12) Your phone will auto reboot when wiped and (hopefully) boot as per normal.
Follow this procedure and download wipe batch file from here http://www.mediafire.com/?ru7erfxsz7p7s3p
All credit goes to @potatohead for his useful thread
---------- Post added at 12:22 AM ---------- Previous post was at 12:19 AM ----------
This is the most easiest way to fix .
Extract file error could be because of a broken kdz or once a kdz larger than 1 gb is flashed using kdz updater it also gives this error
Click to expand...
Click to collapse
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,

clickanu said:
Another thing, now my phone doesnt show any IMEI no, and please suggest me how do i get it and how do i update the kitkat version now...can i root the phone after updating the kitkat or now?
Please suggest...You are just Great
Regards and Thanks,
Click to expand...
Click to collapse
No IMEI means you need to restore EFS backup ,which i doubt you did not make

I didnt know anything about EFS backup....!!! Is there anything wrong with my phone.!
Ahmed Xperia p said:
No IMEI means you need to restore EFS backup ,which i doubt you did not make
Click to expand...
Click to collapse
I dont know anything about EFS??? Please let me know and help me out Brother, You are the boss. How do i get it back? How do i remove the korean system softwares. Please help me out....Regards

signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app

Thanks Senior for your patience to reply....
Ahmed Xperia p said:
signal working fine and phone recognizes sim card ? Check if imei is shown without sim ? Currently you're on which firmware and what firmware you flashed earlir?
Sent from my LG-E975 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,

clickanu said:
Yees, Signal working fine and phone recognizes the sim card.
IMEI not shown without sim Dear Brother. Currently I am on version 4.1.2, jellybean,
I flashed with jellybeam F180S20d_00.kdz.
Please suggest me and help me out
Thanks and regards,
Click to expand...
Click to collapse
Another interesting thing is that, in my phone it is shown F180S but when i connect it to computer via usb, the LG support tool software shows it LGV500.
What about the matter Brother???
Thanks and Regards

If you've lost your imei without making EFS backup , you've lost it forever. There's no fix for this i guess. Best bet for you is use your phone as it is.
Sent from my LG-E975 using XDA Premium 4 mobile app
---------- Post added at 02:06 AM ---------- Previous post was at 02:05 AM ----------
You can try flashing stock kdz for your modle, it may help you but nit guaranteed.
Sent from my LG-E975 using XDA Premium 4 mobile app

Can i root my phone now or after updating to kitkat?

(Soft)Bricked LG G4

While installing the latest version (6.0) which I downloaded, I also wiped the system partition.
Now when I turn it on it just stays at "LG Life's Good" and it won't leave that state unless I turn it off.
I can't enter bootloader/fastboot mode nor recovery for TWRP.
Is there anything I can do?
Note: when I try to do the combination for recovery mode I get the message if I want to go back to factory settings, TWRP doesn't come up.

you cant do nothing . just wait as a lot of people on the forum because is not possible yet to use the flashtool . for flash kdz 5.0 or 6.0

shudoha said:
you cant do nothing . just wait as a lot of people on the forum because is not possible yet to use the flashtool . for flash kdz 5.0 or 6.0
Click to expand...
Click to collapse
I can't even boot to TWRP. Now I have a 500€ brick.
**** me.

melasuda said:
I can't even boot to TWRP. Now I have a 500€ brick.
**** me.
Click to expand...
Click to collapse
its the same issue with a lot of people . you can with flashtool . not need twrp . but for the moment need to wait a update for that

You wiped your /system partition = no OS = so the system can not boot. Not a brick.
The TWRP issue is a bit interesting tough, how did you wipe it? you tried the temporary boot to TWRP via fastboot commands? Or flash it via fastboot again?

davebugyi said:
You wiped your /system partition = no OS = so the system can not boot. Not a brick.
The TWRP issue is a bit interesting tough, how did you wipe it? you tried the temporary boot to TWRP via fastboot commands? Or flash it via fastboot again?
Click to expand...
Click to collapse
its the same issue for a lot of people . as he cant go on android .. he cant put usb debugging then not adb ... and not twrp anymore . reset factory changes nothing . the only one way its flashtool but for the moment need to wait a update bcz impossible to downgrade . and kdz 6.0 doesnt work ....

Who talked about ADB here?

davebugyi said:
Who talked about ADB here?
Click to expand...
Click to collapse
fastboot . without adb on your computer and without your computer recognized your device because not usb debugging ... how you want ?

shudoha said:
fastboot . without adb on your computer and without your computer recognized your device because not usb debugging ... how you want ?
Click to expand...
Click to collapse
There is an update for the G4, where fastboot also requires debugging enabled? No other android phone I ever owned required USB debugging enabled for fastboot, not even the S6 (920F)

davebugyi said:
There is an update for the G4, where fastboot also requires debugging enabled? No other android phone I ever owned required USB debugging enabled for fastboot, not even the S6 (920F)
Click to expand...
Click to collapse
you understand nothing ... with the new 6.0 update for the moment a lot of people have a bootloop as issue ... impossible to make a hardreset ... impossible to install twrp ... impossible to use the flashtool saw the flashtool software is not updated yet ... you cant flash the 5.1 or 6.0 for the moment ... there are too much people with this issue on the website ... look all the post*
we have not access at fastboot mode or recovery mode if you prefer . when you use this option ... the hard reset its impossible and that restart the phone and bootloop again and again

shudoha said:
you understand nothing ... with the new 6.0 update for the moment a lot of people have a bootloop as issue ... impossible to make a hardreset ... impossible to install twrp ... impossible to use the flashtool saw the flashtool software is not updated yet ... you cant flash the 5.1 or 6.0 for the moment ... there are too much people with this issue on the website ... look all the post*
we have not access at fastboot mode or recovery mode if you prefer . when you use this option ... the hard reset its impossible and that restart the phone and bootloop again and again
Click to expand...
Click to collapse
Of course I do not understand, when you are trying to tell me that fastboot needs USB debugging, rather than new bootloader is causing issues

davebugyi said:
Of course I do not understand, when you are trying to tell me that fastboot needs USB debugging, rather than new bootloader is causing issues
Click to expand...
Click to collapse
i told you just for send the commande about fasboot with adb . you need the usb debugging option that all . but only with adb on windows . if you want make that alone you can... but with this issue is not possible there are not more recovery . too much people wait a solution for that

shudoha said:
i told you just for send the commande about fasboot with adb . you need the usb debugging option that all . but only with adb on windows . if you want make that alone you can... but with this issue is not possible there are not more recovery . too much people wait a solution for that
Click to expand...
Click to collapse
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.

davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
all people with this issue after have flashed the autoprime zip etc etc have this problem . you have access at download mode but flashtool doesnt work for the moment because imposible to downgrade for 5.1 and imposible to use kdz 6.0 ... the factory reset doesnt work . whn you do it . you have again the bootloop isue . and impossible to have access at the recovery mode . we are more 100 people on xda to have this issue
then yes you have the button cmbo . and you go in factory reset . normaly after you can go in recovery mod but that doesnt work

davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
It doesn't.
And also if you do the combination of volume down and power button for recovery mode, TWRP won't come up.

davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.

nipun1110 said:
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.
Click to expand...
Click to collapse
first you take the autoprime post already on the forum ... and he is not completed . you have put the half only .

nipun1110 said:
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.
Click to expand...
Click to collapse
I just tried that, with an unlocked bootloader, it doesn't work.

shudoha said:
first you take the autoprime post already on the forum ... and he is not completed . you have put the half only .
Click to expand...
Click to collapse
autoprime posted this? where? can u send me the link? in fact i have given all the credits to all the devs possible. if autoprime has already mentioned this guide somewhere, i will delete the post for sure.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
melasuda said:
I just tried that, with an unlocked bootloader, it doesn't work.
Click to expand...
Click to collapse
Didn't work what? U couldn't even enter fastboot mode? upto where u could go?

nipun1110 said:
autoprime posted this? where? can u send me the link? in fact i have given all the credits to all the devs possible. if autoprime has already mentioned this guide somewhere, i will delete the post for sure.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
Didn't work what? U couldn't even enter fastboot mode? upto where u could go?
Click to expand...
Click to collapse
I got to
Code:
SPECIAL COMMAND : ENTER , LEAVE
#
After that, if I tried to "id" then it would say "FAIL."

Question how to access bootloader if it is locked and mobile is stuck on bootloop ?

HI I tried to roll back from RUI 4.0 to 2.0. But when mobile restarted after installation it got stuck on boot loop . Now the problem is that my bootloader is locked and I cannot access it . What I should do now ? PLS HELP

You need to flash Rui 3 with qfil on edl mode , push on power+ two volume buttons together until the device is shut down, and do like this guide
do backup before you flash the frimware

eliran0216 said:
You need to flash Rui 3 with qfil on edl mode , push on power+ two volume buttons together until the device is shut down, and do like this guide
do backup before you flash the frimware
Click to expand...
Click to collapse
I tried but it gave me error at the point when i clicked manage partitions . What should i do now ??

eliran0216 said:
You need to flash Rui 3 with qfil on edl mode , push on power+ two volume buttons together until the device is shut down, and do like this guide
do backup before you flash the frimware
Click to expand...
Click to collapse
I tried but it gave me error at the point when i clicked manage partitions . What should i do now ?? Pls help

[email protected] said:
I tried but it gave me error at the point when i clicked manage partitions . What should i do now ?? Pls help. Sorry i forgot to mention it is RMX3363
Click to expand...
Click to collapse

I send you pm