While installing the latest version (6.0) which I downloaded, I also wiped the system partition.
Now when I turn it on it just stays at "LG Life's Good" and it won't leave that state unless I turn it off.
I can't enter bootloader/fastboot mode nor recovery for TWRP.
Is there anything I can do?
Note: when I try to do the combination for recovery mode I get the message if I want to go back to factory settings, TWRP doesn't come up.
you cant do nothing . just wait as a lot of people on the forum because is not possible yet to use the flashtool . for flash kdz 5.0 or 6.0
shudoha said:
you cant do nothing . just wait as a lot of people on the forum because is not possible yet to use the flashtool . for flash kdz 5.0 or 6.0
Click to expand...
Click to collapse
I can't even boot to TWRP. Now I have a 500€ brick.
**** me.
melasuda said:
I can't even boot to TWRP. Now I have a 500€ brick.
**** me.
Click to expand...
Click to collapse
its the same issue with a lot of people . you can with flashtool . not need twrp . but for the moment need to wait a update for that
You wiped your /system partition = no OS = so the system can not boot. Not a brick.
The TWRP issue is a bit interesting tough, how did you wipe it? you tried the temporary boot to TWRP via fastboot commands? Or flash it via fastboot again?
davebugyi said:
You wiped your /system partition = no OS = so the system can not boot. Not a brick.
The TWRP issue is a bit interesting tough, how did you wipe it? you tried the temporary boot to TWRP via fastboot commands? Or flash it via fastboot again?
Click to expand...
Click to collapse
its the same issue for a lot of people . as he cant go on android .. he cant put usb debugging then not adb ... and not twrp anymore . reset factory changes nothing . the only one way its flashtool but for the moment need to wait a update bcz impossible to downgrade . and kdz 6.0 doesnt work ....
Who talked about ADB here?
davebugyi said:
Who talked about ADB here?
Click to expand...
Click to collapse
fastboot . without adb on your computer and without your computer recognized your device because not usb debugging ... how you want ?
shudoha said:
fastboot . without adb on your computer and without your computer recognized your device because not usb debugging ... how you want ?
Click to expand...
Click to collapse
There is an update for the G4, where fastboot also requires debugging enabled? No other android phone I ever owned required USB debugging enabled for fastboot, not even the S6 (920F)
davebugyi said:
There is an update for the G4, where fastboot also requires debugging enabled? No other android phone I ever owned required USB debugging enabled for fastboot, not even the S6 (920F)
Click to expand...
Click to collapse
you understand nothing ... with the new 6.0 update for the moment a lot of people have a bootloop as issue ... impossible to make a hardreset ... impossible to install twrp ... impossible to use the flashtool saw the flashtool software is not updated yet ... you cant flash the 5.1 or 6.0 for the moment ... there are too much people with this issue on the website ... look all the post*
we have not access at fastboot mode or recovery mode if you prefer . when you use this option ... the hard reset its impossible and that restart the phone and bootloop again and again
shudoha said:
you understand nothing ... with the new 6.0 update for the moment a lot of people have a bootloop as issue ... impossible to make a hardreset ... impossible to install twrp ... impossible to use the flashtool saw the flashtool software is not updated yet ... you cant flash the 5.1 or 6.0 for the moment ... there are too much people with this issue on the website ... look all the post*
we have not access at fastboot mode or recovery mode if you prefer . when you use this option ... the hard reset its impossible and that restart the phone and bootloop again and again
Click to expand...
Click to collapse
Of course I do not understand, when you are trying to tell me that fastboot needs USB debugging, rather than new bootloader is causing issues
davebugyi said:
Of course I do not understand, when you are trying to tell me that fastboot needs USB debugging, rather than new bootloader is causing issues
Click to expand...
Click to collapse
i told you just for send the commande about fasboot with adb . you need the usb debugging option that all . but only with adb on windows . if you want make that alone you can... but with this issue is not possible there are not more recovery . too much people wait a solution for that
shudoha said:
i told you just for send the commande about fasboot with adb . you need the usb debugging option that all . but only with adb on windows . if you want make that alone you can... but with this issue is not possible there are not more recovery . too much people wait a solution for that
Click to expand...
Click to collapse
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
all people with this issue after have flashed the autoprime zip etc etc have this problem . you have access at download mode but flashtool doesnt work for the moment because imposible to downgrade for 5.1 and imposible to use kdz 6.0 ... the factory reset doesnt work . whn you do it . you have again the bootloop isue . and impossible to have access at the recovery mode . we are more 100 people on xda to have this issue
then yes you have the button cmbo . and you go in factory reset . normaly after you can go in recovery mod but that doesnt work
davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
It doesn't.
And also if you do the combination of volume down and power button for recovery mode, TWRP won't come up.
davebugyi said:
Ermmm wait. So you say the G4 does not have a hardware button combo to boot into download/fastboot straight away from a power off state? That is kinda fail from LG.
Click to expand...
Click to collapse
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.
nipun1110 said:
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.
Click to expand...
Click to collapse
first you take the autoprime post already on the forum ... and he is not completed . you have put the half only .
nipun1110 said:
even you can go into fastboot mode (check this thread: http://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537/post63623844#post63623844) but that won't help unless you have an unlocked bootloader.
Click to expand...
Click to collapse
I just tried that, with an unlocked bootloader, it doesn't work.
shudoha said:
first you take the autoprime post already on the forum ... and he is not completed . you have put the half only .
Click to expand...
Click to collapse
autoprime posted this? where? can u send me the link? in fact i have given all the credits to all the devs possible. if autoprime has already mentioned this guide somewhere, i will delete the post for sure.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
melasuda said:
I just tried that, with an unlocked bootloader, it doesn't work.
Click to expand...
Click to collapse
Didn't work what? U couldn't even enter fastboot mode? upto where u could go?
nipun1110 said:
autoprime posted this? where? can u send me the link? in fact i have given all the credits to all the devs possible. if autoprime has already mentioned this guide somewhere, i will delete the post for sure.
---------- Post added at 06:07 PM ---------- Previous post was at 06:06 PM ----------
Didn't work what? U couldn't even enter fastboot mode? upto where u could go?
Click to expand...
Click to collapse
I got to
Code:
SPECIAL COMMAND : ENTER , LEAVE
#
After that, if I tried to "id" then it would say "FAIL."
Related
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
that block at 9% and told you to remove batery unplug phone etc etc?
i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz
fr33kiLL said:
i have same problem and no 2nd phone here -.- we need a Updated LG Flash Tool 2014 to flash the 20A.kdz
Click to expand...
Click to collapse
unfortunaly we can wait a long time maybe ...
nipun1110 said:
Hello,
I had been using a H815T, locked bootloader, running Seven HD rom v6.1 for more than 2 months flawlessly. Suddenly yesterday my phone was in charge and it restarted and went into bootloop. Since I tried many things and I went to some local technicians as well as one LG engineer, but all failed to gimme any solution. And I don't have any warrenty, I couldn't ask for a replacement for anyone.
So here's what I tried:
1. Flashing international KDZ
2. Flashing default KDZ
3. Formatting from recovery mode
4. Changing battery
Here's what works:
1. Download mode
2. Recovery mode
So I am ready to pay if anyone gimme a solution out of this. Any help will be appreciated as I am in real trouble coz I cannot afford a new phone now.
With thanks
Click to expand...
Click to collapse
stock recovery or twrp..
Google~Android said:
stock recovery or twrp..
Click to expand...
Click to collapse
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue
shudoha said:
we have not access at twrp anymore .... and kdz method doesnt work . phone recognized in all lg software ... support tool 9% and issue
Click to expand...
Click to collapse
did you have an unlocked bl or not?
Google~Android said:
did you have an unlocked bl or not?
Click to expand...
Click to collapse
of course for flash first twrp and after flash all autoprime files and after this .. impossible to have access at twrp . hard reset work . but nothing happens boot loop kdz for rollback doesnt work too . still blocked at 9% on the tool and 0 on my phone and ask me to remove the battery etc etc i did that too much time . but for nothing and the worst . bridge .. support tool recognize my phone like H815 then no driver problem
i have unlocked BL but didnt have access to ADB and Fastboot(idk why) and got stock recovery after flashing so no chance to go in TWRP
Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?
Hardware
It's starting to sound more and more like a MEM BLOCK corruption..
Have you tried this: Firmware to Stock with kdz and tot?
Noo
shudoha said:
that block at 9% and told you to remove batery unplug phone etc etc?
Click to expand...
Click to collapse
No..nothing like that
mr turtle droid said:
It's starting to sound more and more like a MEM BLOCK corruption..
Click to expand...
Click to collapse
What's that and what's the remedy? And usually what causes it?
martinsavvy said:
Does the phone freeze at random times? Like no matter where its at, sometimes it boots to the operating system?
Click to expand...
Click to collapse
To me it used to happen sometimes while charging. I had to manually switch off the screen and when i switched on the screen, it became normal for a while. I thought it was due to heavy xposed customizations.
michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
That's the KDZ method. Yah I tried it as I mentioned.
michael08071984 said:
Have you tried this: Firmware to Stock with kdz and tot?
Click to expand...
Click to collapse
tested but like i told you .... blocked at 9% and remove battery unplug etc etc and nothing happend
Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.
fire3d said:
Try this:
copy all zip files you need to reflash (10D or similar) to a memcard
Also download latest twrp and copy it to the directory where you have adb.exe
Open a Command prompt on your PC (where adb is located) and powerup the phone,
open up the Device Manager on your PC to see when the adb device is there,
in the moment where you see the adb device fire up the comand:
adb reboot bootloader
if that works enter the comand:
fastboot boot twrp-2.8.7.0-h815.img
this will boot directly into Twrp without flashing twrp and you can try things from twrp
I hope this will help here, helped me with the phone from a friend of me who had a similar problem.
Click to expand...
Click to collapse
problem boot loop when i open my phone even with hard reset that change nothing and adb said : device not found when all program like lg support or bridge recognize my phone like h815 ... then not solution
Hi, before i annoy most of you by saying i am an absoute newbie at all this i will say i pick things up quickly, and most often learn.....basically a friend helped me last year unock my LG G4 [was locked to Vodafone] He also unocked it for superuser access/ root checker etc. Basically im trying to upgrade to Marshmallow [as im stuck on 5.1] but the offical update doesnt work and im a litte confused with how to go about installing said software/ doing it manually......any help would be brilliant, thanks jamie
jamious-daywalker said:
Hi, before i annoy most of you by saying i am an absoute newbie at all this i will say i pick things up quickly, and most often learn.....basically a friend helped me last year unock my LG G4 [was locked to Vodafone] He also unocked it for superuser access/ root checker etc. Basically im trying to upgrade to Marshmallow [as im stuck on 5.1] but the offical update doesnt work and im a litte confused with how to go about installing said software/ doing it manually......any help would be brilliant, thanks jamie
Click to expand...
Click to collapse
which device have you got is it the H815 international version?
Also is your bootloader unlocked?
If im right i have the EU/INT H815
Bootloader.....how would i go about checking this?
jamious-daywalker said:
If im right i have the EU/INT H815
Bootloader.....how would i go about checking this?
Click to expand...
Click to collapse
I had to go to bed last night i was too tired , anyway first go into settings / about phone / software info and check if you are on h815 if you are then go to the playstore and get an app called rebooter , install and click on reboot to recovery if an lg recovery comes up just restart your phone and i can't really help you but if it says twrp recovery then its easy so check that first and then reply back ...
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
Also to check if your bootloader is unlocked simply restart your phone and at the top of the phone it will say in small writing - bootloader unlocked...
Xceeder said:
I had to go to bed last night i was too tired , anyway first go into settings / about phone / software info and check if you are on h815 if you are then go to the playstore and get an app called rebooter , install and click on reboot to recovery if an lg recovery comes up just restart your phone and i can't really help you but if it says twrp recovery then its easy so check that first and then reply back ...
---------- Post added at 11:03 AM ---------- Previous post was at 11:01 AM ----------
Also to check if your bootloader is unlocked simply restart your phone and at the top of the phone it will say in small writing - bootloader unlocked...
Click to expand...
Click to collapse
Ok i do have H815...downloaded the rebooter off the play store [the first one listed] alas when i use it it does pop up with LG logo, annnnnd it seems my bootloader isnt unlocked [nothing comes up when restarting
jamious-daywalker said:
Ok i do have H815...downloaded the rebooter off the play store [the first one listed] alas when i use it it does pop up with LG logo, annnnnd it seems my bootloader isnt unlocked [nothing comes up when restarting
Click to expand...
Click to collapse
Well you have two choices
1. unlock your bootloader via lg website
2.flash a stock .kdz marshmallow rom using lg bridge
The choice is yours if you need any more help then just msg me and if my posts have helped you then please leave a thumbs up it helps others to know my information is reliable and trustworthy....
Xceeder said:
Well you have two choices
1. unlock your bootloader via lg website
2.flash a stock .kdz marshmallow rom using lg bridge
The choice is yours if you need any more help then just msg me and if my posts have helped you then please leave a thumbs up it helps others to know my information is reliable and trustworthy....
Click to expand...
Click to collapse
I persume both these ways are easy to do/ achieve? Which is easier to do for a noob lol
jamious-daywalker said:
I persume both these ways are easy to do/ achieve? Which is easier to do for a noob lol
Click to expand...
Click to collapse
This is what I would do,
Go to LG developers and create an account to unlock your bootloader, NOTE - when unlocking your bootloader it will erase everything on your device so back up everything that is important before unlocking
Then download Genisys rom 2.8 MM and Genisys bootloader and modem version 20D then download twrp 2.8.7.0
1.transfer the downloaded files onto your phone
2.flash twrp
3.boot into twrp and wipe system/data/dalvik/cache
4.install Genisys rom then let phone reboot
5.reboot back into twrp recovery and flash Genisys bootloader and modem 20D
Done...
Any questions you have just message me back but if you follow my guide step by step you'll be fine and on marshmallow in no time.....
---------- Post added at 12:13 AM ---------- Previous post was at 12:06 AM ----------
It is best to download the rom, bootloader, modem and twrp on a pc first and then transferring to device also you will have to make sure that the drivers are fully installed on your pc for your phone, also you will need the adb files to create an adb connection so check some videos on YouTube from XDA and root junky to be fully sure you have all the files....
It sounds quite hard but as long as you have all the files and follow all the instructions you will be able to do it...
thanks for all this, im going to attempt it all tonight as i have the night off work...slowly making my way through the LG unlocking bootloader lol
Well inbetween playing my games, watching tv shows i managed to get the bootloader thingy unlocked, now trying to get my head round this recovery, marshmallow rom thingy
jamious-daywalker said:
thanks for all this, im going to attempt it all tonight as i have the night off work...slowly making my way through the LG unlocking bootloader lol
Click to expand...
Click to collapse
Well....that was kinda the hard way. You could've easily just downloaded the latest marshmallow KDZ file from here and install it with this tool. Both threads are noob friendly and self-explaining. But nevermind :laugh:
Cheers follow
Edit: If you're experiencing any trouble with rooting/modding/recovery/kdz's or have any questions concerning the G4 you can pm me!
---------- Post added at 09:58 AM ---------- Previous post was at 09:55 AM ----------
jamious-daywalker said:
If im right i have the EU/INT H815
Bootloader.....how would i go about checking this?
Click to expand...
Click to collapse
Answer to this question is pretty simple: If you didn't follow the official steps on the LG page to unlock your bootloader, you didn't unlock your bootloader
thanks, i managed to unlock the bootloader thingy as now when i restart my phone theres the little message ion the corner....just now trying to understand how to put the recovery thing/ cfw on it for marshmallow
jamious-daywalker said:
thanks for all this, im going to attempt it all tonight as i have the night off work...slowly making my way through the LG unlocking bootloader lol
Well inbetween playing my games, watching tv shows i managed to get the bootloader thingy unlocked, now trying to get my head round this recovery, marshmallow rom thingy
Click to expand...
Click to collapse
Haha you can do it buddy just double check you have all the files and read the guides carefully also check out those links which were provided by Follow_and_Feel they might help you a touch..
I hope I've helped the community to start helping you instead of just reading your post and then going
thanks, ive actually learned a bit doing all this.....i have 1 issue now though with my phone not connecting to my laptop [it says its charging etc, i had to reinstall the lg drivers aswell [once i had done that bootloader reset thing]
Am i missing something again?
jamious-daywalker said:
thanks, i managed to unlock the bootloader thingy as now when i restart my phone theres the little message ion the corner....just now trying to understand how to put the recovery thing/ cfw on it for marshmallow
Click to expand...
Click to collapse
Put your twrp file in your adb folder
Open a command window in your ads folder
Type
adb flash (nameoffile).img
So an example is adb flash twrp.2.8.7.0.img
---------- Post added at 09:23 AM ---------- Previous post was at 09:22 AM ----------
jamious-daywalker said:
thanks, ive actually learned a bit doing all this.....i have 1 issue now though with my phone not connecting to my laptop [it says its charging etc, i had to reinstall the lg drivers aswell [once i had done that bootloader reset thing]
Am i missing something again?
Click to expand...
Click to collapse
Turn your phone on and enable USB debugging
thats what ive done, its switched on, went through the "welcome set up" etc....enabled debug mode and turned on....but connecting the usb, it just says chargine, not the 3 options [media transferring etc] so i cant put the said files on my phone
jamious-daywalker said:
thats what ive done, its switched on, went through the "welcome set up" etc....enabled debug mode and turned on....but connecting the usb, it just says chargine, not the 3 options [media transferring etc] so i cant put the said files on my phone
Click to expand...
Click to collapse
It's okay, don't worry fella
The main thing is you've unlocked your bootloader and you can boot into your phone ( things could be a lot worse trust me)
Go into device manager and check if your phone is in there also plug your phone in enable USB debugging install drivers disable USB debugging,
Switch to mtp install drivers then switch to ptp (the other one) and try to connect that way,
Don't give up buddy you've done really good so far, I have to go work soon but as soon as I'm back I'll check XDA for your post and help as soon as I can.....
ok just found out, after double checking the developer options, it seems the debug usb check box was checked off [does it auto check off on shut down?]
is it best to try install this recovery first before that marshmallow kdz file?
jamious-daywalker said:
ok just found out, after double checking the developer options, it seems the debug usb check box was checked off [does it auto check off on shut down?]
is it best to try install this recovery first before that marshmallow kdz file?
Click to expand...
Click to collapse
It doesn't matter which one is first
Also if you have an sd card then put it in an sd card reader plug in pc and copy the files from pc then insert into phone and if you still can't connect via adb then look for an app on XDA called flashfire and use that to flash twrp I'll check back as soon as I'm back from work...
Ok trying to install the recovery thing, managed to boot the phone into the boot loader, but when i try to do anymore it wont work......ive put the 2 files [recovery / superuser thing] in my DOWNLOAD folder of my phone
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot TWRP2861.img
cannot load 'TWRP2861.img': No such file or directory
jamious-daywalker said:
Ok trying to install the recovery thing, managed to boot the phone into the boot loader, but when i try to do anymore it wont work......ive put the 2 files [recovery / superuser thing] in my DOWNLOAD folder of my phone
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot TWRP2861.img
cannot load 'TWRP2861.img': No such file or directory
Click to expand...
Click to collapse
It will say no such directory because you haven't flashed it yet type
adb flash twrp.2.8.7.0.img (that's an example, type whatever the twrp file is called)
Hello community members,
TL;DR no adb, no fastboot, no flashmode, no QDloader (or similar) ... how to unbrick it?
I was trying to force Android to allow lower lcd backlight brightness levels by patching framework-res.apk and I had the edited zip file ready to flash. Then I realized that my Android 7 Ressurection remix ROM (thread) flashed Cyanogenmod recovery, which I don't like. So I decided to reflash TWRP 3.0.2 (link) ( edit: using "fastboot flash boot twrp.img", which was almost fatal mistake) and it has gone almost well. The phone started to boot into recovery mode everytime (and took a long time doing so). So I googled a bit and found this thread which lead me to this thread. I was looking forward to seeing my display brightness at lower than default values, so I probably skipped some security checks and texts with red color, so I flashed the zip with the boot.img replaced. After flashing I chose reboot and nothing happened since.
The problem is I flashed something that was not for my device (extracted boot.img to wrong mmcblk). The command that bricked my phone is (from META-INF/com/google/android/updater-script):
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p6");
After that it doesn't boot, doesn't light up LED (even when charging), doesn't get detected by PC in any state.
So I have no adb, no fastboot and no flashmode and not even a QDloader or similar mode.
Is there a way to unbrick it?
EDIT: How to unbrick it using JTAG interface? If I find somebody that has the required equipment, what data do I need to give them?
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
valkata752 said:
Hey there! Did you manage to solve the issue, because I just got into the same situation after the zip didn't save the corrected partitions but the initial ones... So i ended up without any signs of life in my phone
Click to expand...
Click to collapse
Nope, I found no solution ... even some kind of Qualcomm flashing mode via COM (serial port over USB) does not show up nowhere. I gave up and bought a used S5 mini, which is full of features I appreciate.
I'm gonna keep this Xperia M for some time if some solution comes up.
hi , can you boot into recovery ? ..if yes, i can maybe help
olibub said:
hi , can you boot into recovery ? ..if yes, i can maybe help
Click to expand...
Click to collapse
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
mik13ST said:
No, as I said, the phone does not react on anything. I would be able to put it back together if this was possible.
Click to expand...
Click to collapse
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
olibub said:
:/ this will be a problem... try look here http://rootmyandroid.org/how-to-unbrick-your-android-device-the-ultimate-guide.html/
and find this article "Unbrick any android device with Once Click Unbrick tool"
Click to expand...
Click to collapse
Nice looking tutorial, but I cannot find any download link for that One Click Unbrick Tool in that article. I doubt it would work, they are not explaining what it does.
Nicklas Van Dam said:
can you still access fastboot mode? anyway you need to know first what is exactly partition that you overwrite with boot.img :/
. That was really critical -_-
Click to expand...
Click to collapse
No, as I said. The partition that got overwritten was /dev/block/mmcblk0p6. It was overwritten by boot.img from LG OPTIMUS 3D that I link to in the main post.
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
olibub said:
here you can download unbrick tool https://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
I don't think this has any chance that it will work.
"This Software:
Will work on all Samsung devices which use Odin3"
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
PhoenixTwoFive said:
Do you know how to use Flashtool?
If so, did you already attempt flashing a ftf via Flashmode (Hold VolDown)?
Click to expand...
Click to collapse
I know what Flashtool is. I know what ftf is. I used it once I think.
But the phone does not boot into flashmode as I mention in the main post.
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
In case the usb connection doesnt stick it means you have exchange mother board... i`ve been in the same shoes bro. Tried everything.. no luck.
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?
pvineeth97 said:
I don't understand what do you mean by "USB" connects and disconnects? What do you see on screen after entering download mode?
Click to expand...
Click to collapse
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)
Mulukou said:
After entering download mode, windows detects the phone, but after 1 sec it loses connection to the phone, in the K10 appears the normal download mode screen (after a little time, the phone reboots)
Click to expand...
Click to collapse
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.
ArcherEmiya said:
did you use the original USB cable of k10? try to use LGbridge instead since LGUP doesnt work perfectly with K10 because it so hard to find its DLL file. If you are using LGUP to flash use it with Uppecut Software to bypass its incompatibility issue search it in google and you will find it xda.
Click to expand...
Click to collapse
I used the original cable and tried LGBridge, didn't work.
Mulukou said:
So, i unlocked bootloader, tried to install TWRP 3.0.0 by berkantkz but it didn't work, so i used the gottlasz guide, after going to recovery i installed the cm 13 unnofficial rom by pvineeth97, after this the phone just bricked I can enter recovery mode (which is not TWRP) but it doesn't change anything, I can enter download mode, but after entering the usb connects and disconnects, making it impossible to use the LGUP. Is there any hope or I can't recover my phone at all?
Click to expand...
Click to collapse
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..
Professor Woland said:
First you don't install twrp you just boot it from fastboot.
Other thing is that if you read any post in that thread you would see that everyone who tried to install that rom got their phone bricked, some of them succeeded to bring phone back to life, and some killed their devices for good..
So if you can't have stable connection via usb then I have bad news for you..
Click to expand...
Click to collapse
Yep I knew the risks, just wanted some hope i guess...
Mulukou said:
Yep I knew the risks, just wanted some hope i guess...
Click to expand...
Click to collapse
I don't understand why did'nt you read the forums before flashing it and moreover the ROM was just for testing purposes for advanced developers and it was clearly written at top of the page.
My Lg just froze and rebootet into the normal boot screen where it just stays
I tried to factory reset it but it just says erase for a short moment and goes back to Lg Logo
I tried Lgup with a Stock rom for the LG it finishes everything but just goes into Lg logo again
Any Help??
Leon200318 said:
My Lg just froze and rebootet into the normal boot screen where it just stays
I tried to factory reset it but it just says erase for a short moment and goes back to Lg Logo
I tried Lgup with a Stock rom for the LG it finishes everything but just goes into Lg logo again
Any Help??
Click to expand...
Click to collapse
Anyone with the same problem or a fix?
Leon200318 said:
Anyone with the same problem or a fix?
Click to expand...
Click to collapse
You have either bricked the phone or its not the correct rom,
Try a different rom, Maybe you can restore it with TWRP if you installed it, Or try download mode.
Eevvaann6 said:
You have either bricked the phone or its not the correct rom,
Try a different rom, Maybe you can restore it with TWRP if you installed it, Or try download mode.
Click to expand...
Click to collapse
The Rom is from the official Lg site tried 2 different
I dont have a recovery cause i cant get into fastboot neither recovery mode
Just lg logo mode and download mode/firmware update mode.
I go try some other roms
Leon200318 said:
The Rom is from the official Lg site tried 2 different
I dont have a recovery cause i cant get into fastboot neither recovery mode
Just lg logo mode and download mode/firmware update mode.
I go try some other roms
Click to expand...
Click to collapse
Make sure its for the correct model, I have a LG K10 the firmware is on the LG site but I have a At&t model which doesn't have official firmware from the sites. To get into android recovery which might help see your phone is bricked install ADB and Fastboot and run "adb reboot recovery" Also some LG phones don't have Fastboot like the At&t of the LG K10 Which I have. Hope you can get it to work
---------- Post added at 04:02 AM ---------- Previous post was at 03:58 AM ----------
Also try Safe mode, you could try it maybe you can get into it, so if that is the case, its probably something with what you did or how you flashed, if you still can't get it to work maybe wrong firmware.
Eevvaann6 said:
Make sure its for the correct model, I have a LG K10 the firmware is on the LG site but I have a At&t model which doesn't have official firmware from the sites. To get into android recovery which might help see your phone is bricked install ADB and Fastboot and run "adb reboot recovery" Also some LG phones don't have Fastboot like the At&t of the LG K10 Which I have. Hope you can get it to work
---------- Post added at 04:02 AM ---------- Previous post was at 03:58 AM ----------
Also try Safe mode, you could try it maybe you can get into it, so if that is the case, its probably something with what you did or how you flashed, if you still can't get it to work maybe wrong firmware.
Click to expand...
Click to collapse
Adb doesnt find the phone i only can get into download mode and there it doesnt get recognized
My phone hasnt got fastboot too
I tried many firmwares now, neither of them work i tried to do it with lg bridge and it doesnt work either all of the firmwares where for my lg k10 m250n
Is there another way to get into recovery
Bit more information:
When i try to start it in safe mode it shows lg logo goes for a short while to a screen where it shows "erasing" then just goes to lg logo again.
And again another thing: the phone behaves the same if I flash the wrong rom it does the exact same.
Leon200318 said:
Adb doesnt find the phone i only can get into download mode and there it doesnt get recognized
My phone hasnt got fastboot too
I tried many firmwares now, neither of them work i tried to do it with lg bridge and it doesnt work either all of the firmwares where for my lg k10 m250n
Is there another way to get into recovery
Bit more information:
When i try to start it in safe mode it shows lg logo goes for a short while to a screen where it shows "erasing" then just goes to lg logo again.
And again another thing: the phone behaves the same if I flash the wrong rom it does the exact same.
Click to expand...
Click to collapse
How do you try to start that safe mode? What buttons you used?
>Is there another way to get into recovery
Go into download mode and using Send_Command
or lglaf.py give it this command: multi_init
There push Vol+ and then Power once.
CXZa said:
How do you try to start that safe mode? What buttons you used?
>Is there another way to get into recovery
Go into download mode and using Send_Command
or lglaf.py give it this command: multi_init
There push Vol+ and then Power once.
Click to expand...
Click to collapse
Wow didn't thought someone reply to this after the long time I just say thx for response even if it's not workin
I don't even know which buttons I used for safe mode but I can look after it later
I'll give it a try with the python script when I get to my pc tomorrow
Will be Posting the results directly after
Also 2 more questions
What does the recovery look like on the LG k10
And can I flash custom recovery zips with that?
Leon200318 said:
Wow didn't thought someone reply to this after the long time I just say thx for response even if it's not workin
I don't even know which buttons I used for safe mode but I can look after it later
I'll give it a try with the python script when I get to my pc tomorrow
Will be Posting the results directly after
Click to expand...
Click to collapse
The Send_Command might be easier. With that py you have mod it a bit and use an older version drivers. Was it 4.04 or something, then it works.
If you're using Windows that is... Then there is Steadfasterx's and some other lglaf versions that might work...
With send_command you just find the the COM port the diagnose or whatever uses, like:
reg query HKLM\hardware\devicemap\SERIALCOMM
And then: Send_Command.exe \\.\COM[com port number]
Send_Command.exe \\.\COM22
Then you can give that command, and by default it will boot to the recovery.
In recovery there is that dead android guy waiting, that's why those buttons.
Custom zips: No way. Now keys to sign them... and the bootloader should be
unlocked to do any changes...
CXZa said:
The Send_Command might be easier. With that py you have mod it a bit and use an older version drivers. Was it 4.04 or something, then it works.
If you're using Windows that is... Then there is Steadfasterx's and some other lglaf versions that might work...
With send_command you just find the the COM port the diagnose or whatever uses, like:
reg query HKLM\hardware\devicemap\SERIALCOMM
And then: Send_Command.exe \\.\COM[com port number]
Send_Command.exe \\.\COM22
Then you can give that command, and by default it will boot to the recovery.
In recovery there is that dead android guy waiting, that's why those buttons.
Custom zips: No way. Now keys to sign them... and the bootloader should be
unlocked to do any changes...
Click to expand...
Click to collapse
I have access to both Windows and Ubuntu
I Will try what you said and just will look if it works
What are my options to do when I'm in recovery mode?
Leon200318 said:
What are my options to do when I'm in recovery mode?
Click to expand...
Click to collapse
Basically the factory reset. Fastboot/bootloader doesn't work.
>There push Vol+ and then Power once.
edit: Actually, it is other way around. Push Power and then Vol+ once.
CXZa said:
Basically the factory reset. Fastboot/bootloader doesn't work.
>There push Vol+ and then Power once.
Actually, try with Vol- if Vol+ doesn't do the trick. Don't remember these so well anymore.
Click to expand...
Click to collapse
I have done many factory resets
They start with a screen saying "erasing" and then just stop then it restarts two times and then just go into LG screen again
Leon200318 said:
Anyone with the same problem or a fix?
Click to expand...
Click to collapse
Same problem, and i cant acces to recovery or bootloader, and im searching for scatter file to use sp flash tools.
javier8340 said:
Same problem, and i cant acces to recovery or bootloader, and im searching for scatter file to use sp flash tools.
Click to expand...
Click to collapse
I don't have the bootloader too but I guess yours Is locked too like mine
But that doesn't help me.
I have download mode and recovery mode where the only option is to factory reset it.
Adb doesn't work
And it doesn't made a change for me if I flash a OS that is right or if I flash a OS that is wrong.
It does the same with both so I can't see how I should ever revive it.
Mabye a custom recovery packed into the OS file but idk how and where to get one.
Leon200318 said:
I don't have the bootloader too but I guess yours Is locked too like mine
But that doesn't help me.
I have download mode and recovery mode where the only option is to factory reset it.
Adb doesn't work
And it doesn't made a change for me if I flash a OS that is right or if I flash a OS that is wrong.
It does the same with both so I can't see how I should ever revive it.
Mabye a custom recovery packed into the OS file but idk how and where to get one.
Click to expand...
Click to collapse
I have seen a video where a men do a reflow and works but i dont know if is these the problem, i think its dead.