Ring is not working - Samsung Galaxy Watch

I had problems with ring so I bought replacement parts ( Sealing + Ball Bearings + Spring set), cleaned everything but ring is still not working – it looks good, works smooth and I hear click sound when turning around but in OS there is no feedback except one position. It is round so it is hard to say exact position but I have a scratch on a ring so when this scratch is on 10 and I move one position clockwise or counterclockwise I can see move but all other ring position is not having any feedback in OS. I don’t know how exactly this ring works and how can I fix this? I have photos and movie but I cant post it becuse I'm new member.

Related

Ringer off button?

I've been lurking and downloading from this great wiki since purchasing my MDA III 2 months ago. Pretty happy with it, but there is one missing feature I would like to have:
Is there a way to make the volume slider on the side of the BA turn off the phone ringer? Or can I program one of the buttons to turn off the phone ringer? More than once I have had to fumble with the BA to shut it up in a meeting or, worse, in a lecture with me as the lecturer!
I use PPCProfiles Pro... you can have buttons on the today page to instantly change to silent/loud/etc etc. Another good one is PocketZenPhone which I used to use but it caused some instability for me.
i recommend you use PocketZenPhone.. more stable
Yeah well as I said in my message, I had more stability issues with PZP
If, when the phone rings, you want to silence the device, the volume up/down slider does that anyway without adjusting the volume of the phone.
If you want to turn the ringer on or off by using the volume slider that's another story. I'm using O2Plus which gives you some phone customisations (not specific to O2) like phone/divert profiles. Can't say I've tried any others.
Dom
Thanks for the quick suggestions.
To clarify, I need to mute the ringer using one of the physical buttons exposed with the BA in an Innopocket aluminum case, without having to open the case. When the phone rings at an inappropriate time, I want to reach into my pocket and mute the ringer with one touch. The volume slider is exposed, but it won't shut off the ringer.
Just out of curiosity, I just bought the same innopocket hardcase today. Don't you find it to scratch easily your BA because of the sharp edges of the case and the very very tight closing system?
BTW, i use one of the hardware button (record) to switch between PZP profiles (quiet)
Just out of curiosity, I just bought the same innopocket hardcase today. Don't you find it to scratch easily your BA because of the sharp edges of the case and the very very tight closing system?
BTW, i use one of the hardware button (record) to switch between PZP profiles (quiet)
thanks for the advice on PZP. I've been using the innopocket for about 2 months and I don't see any scratches on the BA. I am pretty rough on PDAs, breaking 3 screens in 4 years, so my devices need the armor.
If I get a call and want to mute the ring tone, I just move the Volume slider on the side up or down one time, and it mutes the ring tone.
Yours should do the same???
bosjo, you are right! I am an idiot! I will now return to lurking and try not to waste any more time....
He he, give your self a pad on the shoulder and move on :wink:
We have all been there :wink:
stuartestrand said:
Thanks for the quick suggestions.
To clarify, I need to mute the ringer using one of the physical buttons exposed with the BA in an Innopocket aluminum case, without having to open the case. When the phone rings at an inappropriate time, I want to reach into my pocket and mute the ringer with one touch. The volume slider is exposed, but it won't shut off the ringer.
Click to expand...
Click to collapse
Hi,
Qtek 2020 with 2003SE or Buzz WM5 does that!
In a incoming call, I can stop the ring using volume button slider.
Is you use WisBar Advance 2 (release for WM5) then this feature will not work, but they are working on it.

Problem with side sound slider

Hello..Today the side sound slider came off and i couldn't put it back...It goes in but since it doesn't have anywhere to be caught it coomes off...So i glued it and now it's there but can't be moved...So i would like to know if i can assign the mute call function of this slider to another button...It would be extremely helpful for me since this is the only function for which i use this slider.

Help Plz! Face down Loudspeaker ain't working

Hi,
I set the option of facedown LOUDSPEAKER ON function and tried reset several times, but this is not working. even after installing tweak software which allows FACE DOWN MUTE, it is not working.....can someone provide me a solution to it!!!!!
I Would be obliged.
REGARDS.
Did you calibrate the gsensor? It won't work for me either unless I calibrate is. And it would also help if you tell use which rom you use.
htcpedia settings tool
try this app. The settings are under phone, page 2. works for me.
did u download some tweak program? i had that happened when i messed around with HD tweaks. it knocked out my speaker and i couldnt hear anything when someone called or i dialed out. it drove me crazy till i figured out what it was. it was when i was messing with the audio, trying to make it louder thru the tweak program. hopefully u get it working soon. i do love that feature, juss put the phone face down and speaker automatically cuts on. with really great sound quality. i believe the tilt 2 has 2 mics and 2 speakers. really great for conference calling. keep us updated
I use official WinMo6.5.... the problem is....when i hold it straight bottomdown,it works and just a slight movement in the angle switches it off....
ohhhh..ok...hmmm...maybe u need to calibrate the g sensor again. it sounds like its not calibrated right. or instead of putting it face down to activate speaker, during your call, juss press the speaker button and it should go into speaker phone. i dont think the g sensor messes with it in that mode. that face down thing is linked to the sensor and thats why its being thrown off.
If i put the TP2 face down on a flat surface in active call, it turns on the loudspeaker...but as soon as i lift it up and a slight change in angle switches off the loudspeaker.....is this USUAL with every TP2 or is there problem with mine?
I think that's normal. You're supposed to leave it flat on the table; picking it up again switches off the speakerphone, that's how the feature works.

Moto G5 Notification Sound Volume

Can anyone assist me as I'm not very technical when it comes to phones but on my Moto G5 when the proximity sensor on the front panel is not covered I can hear all notification sounds eg:- Calls,E-Mails,Text Msg etc. But if I cover the sensor the volume decreases by approximately 95% this happens when the phone is in my pocket and I can't hear it ring?? I have proved this by calling the phone from my landline and covering the sensor with my finger,when covered the sound is hardly heard but if I don't cover it the sound is at full volume,any suggestions or ideas how I can get this problem sorted????Many Thanks,Seth. Just a short update on this problem I have done a FACTORY RESET on the phone as advised and this still occurs.When I go into SAFE MODE I do not get any sound from the phone at all.To test this I sent an E-Mail from my laptop and it was received on the phone with no sound only an E-Mail Icon,the same happens with an incoming call no sound but a Phone Icon to indicate I have received a call????Any suggestions???? Hi there just an update I have had a brand new replacement phone and transferred my Sim's and Sd Card to the new phone powered it up and I STILL have the same problem???When the display is covered the sound is cut by approx 95% but if the display is NOT covered then the phone volume is at full??? The Apps I have installed are 1 Truecaller, 2 Zedge Ringtones, 3 BBC Weather, 4 My Vodafone, 5 Google Keep and 6 MIPC can anyone help?????

Vibration noise

Hi, is it normal that you can actually hear the vibration (quite loudly) when pressing nav bar buttons or typing etc?
I've not noticed it on previous/other phones so was wondering if it's faulty...
I think that you can switch the vibration level in the settings app. At least it worked for me in my old OP5.
Yea I have it set to the lowest level, but in a silent room you could still hear it from say 1-2 meters away. Sounds like when you blow on the lip of a glass bottle lol
seros said:
Yea I have it set to the lowest level, but in a silent room you could still hear it from say 1-2 meters away. Sounds like when you blow on the lip of a glass bottle lol
Click to expand...
Click to collapse
Can you also feel slight vibration when you tap near the keyboard area? I think the vibration motor moves slightly when you tap the phone
No, I haven't noticed any other vibrations when tapping on the screen.
With regards to my issue, from watching YouTube videos it appears to be 'normal'.
Massive design floor in my opinion, what's the point of vibrate mode if it's just as loud as having touch sounds on lol!
same here, vibration is too loud and i find it very annoying to feel.Anyone did try adjust vibrations with custom kernel?

Categories

Resources