Related
hi guys, i wrote here because all links are expired. i have a very big problem with my ace 2 because it is in loop at the logo screen. it's happen when i tried to root the phone with odin. i tried and tried with the same file and with other files: rom, kernel etc.. but the result is the same.
someone can help me?
Desmojack said:
hi guys, i wrote here because all links are expired. i have a very big problem with my ace 2 because it is in loop at the logo screen. it's happen when i tried to root the phone with odin. i tried and tried with the same file and with other files: rom, kernel etc.. but the result is the same.
someone can help me?
Click to expand...
Click to collapse
Is it the Android boot screen (i.e. Samsung/Cyanogenmod) or the Bootloader screen, that shows up first thing no matter which ROM you have?
-Bhavesh
bhaveshparajapat said:
Is it the Android boot screen (i.e. Samsung/Cyanogenmod) or the Bootloader screen, that shows up first thing no matter which ROM you have?
-Bhavesh
Click to expand...
Click to collapse
I started with the stock rom, and i didn't be able to install new roms because at the first flash for root permission with odin, my phone restart with the loop. and the new files i flashed with odin gave me the same loop.
now, i think that the only solution is reset all. where is the right link? active link!
Yup
Desmojack said:
now, i think that the only solution is reset all. where is the right link? active link!
Click to expand...
Click to collapse
I think so too. Try using a three part firmware, I can't just provide the .pit because you'll need the modem file too.
Try using a three part firmware if a single file one doesn't work
Odin Single File = i8160XXXXX.tar.md5 which goes in PDA
Odin Three part = Modem, PDA and PIT (This repartitions your device back to factory so you'll lose all data and partition changes you've made!!))
--Bhavesh
yes,this is a good idea..but where i can find the three files for back to factory ?
Desmojack said:
yes,this is a good idea..but where i can find the three files for back to factory ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2340849
The XXMF1 firmwares might have all three files. I don't know but from what I can collect it seems to be the most likely. The test XXMC8 and MB4 firmwares also contain three files, but, they're test firmwares, so I wouldn't recommend it - and you should flash stable firmware afterwards (after the phone reboots and you see the 'PASS' message on the computer and the phone has started to boot)
Good luck!
i'm very stupid... the only problem was battery low.. tnx anyway!
Desmojack said:
i'm very stupid... the only problem was battery low.. tnx anyway!
Click to expand...
Click to collapse
No problem! Try not to flash if you have less than 70% or so battery left as a general rule
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, I mannaged to root my device before usb debugging was on all good tablet was perfect etc... And than I did the stupidest thing ever... I installed TWRP Recovery and in order to make a clean back up of my system I selected Wipe out everything.... So the big problem is that after I manually selected every option System etc... can´t remenber but I do know I did wipe out EVERY SINGLE THING, And I did exit even receiving a WARNING you dont have a SYSTEM.... and I did yes quit.... Than to find myself stuck on the samsung logo and being totally blocked since than, I discovered with regret that I actually DIDNT had a Micro SD card and I did wipe out everything including the Restore program if Im getting it right.... I dont know if its already to late and I can go cry on a corner for waisting 500$ in 2 days or is there anything I could do ???, I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use my Zip unofficial downloaded rom and install. And I dont get it why my programm sems so buggy and I can´t select any of those options.
at least I could root my phone easyly.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seryouslly cant thank you enough I googled around and did search a lot on the XDA forums, Im now more scared to go depeer and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Hi have you read this thread. http://forum.xda-developers.com/galaxy-tab-s/help/to-event-soft-brick-disaster-t2838473
maxal said:
Hi have you read this thread.
Click to expand...
Click to collapse
Hey maxal, thx for replying, my English is really not the best, if you think its not understandable I will re edit and try again.
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Read this too. http://theunlockr.com/2014/08/09/how-to-unroot-the-samsung-galaxy-tab-s-10-5-wifi/
TURNING THE DARNED THING OFF:
Here's the problem. If you are at the Samsung splash screen or boot looping Recovery, you cannot turn your tablet off by just pressing the power button and you can't pull the battery. This prevents you from getting back into Recovery or download mode to restore your nandroid backup or use Odin
So here is what you do:
1) Plug your tablet into your computer (this is important!).
2) Hold down the home, volume down and power buttons until you boot into download mode. Once you are prompted, push the volume up button to enter download mode completely.
3) Now, once in download mode, hold down the power and volume down buttons (not the home button this time) until you screen goes blank (your tablet MUST be plugged into your computer for this to work!). Release the buttons and you will see the battery symbol on your screen. Your tablet is now off - thank god.
4) To enter Recovery mode, hold the home, volume up and power buttons down until Recovery loads.
5) Restore your nandroid backup if you have one.
maxal said:
You will need to find and download your firmware from Sammobile http://www.sammobile.com/firmwares/database/SM-T800/BTU/
and use odin to reflash your stock firmware.
Click to expand...
Click to collapse
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
lleresche said:
Thank you so much Maxal I will do it so, indeed the text was terribly written I tried to make it better and more understandable, I read that actually Kies was the way to go for flashing back a bricked device, and odin was actually a risky thing, is that right ?
Click to expand...
Click to collapse
I believe kIes is for stock unrooted devices and Odin is for rooted devices, I may be wrong. I did get my self in a mess and I was stuck on the Samsung logo and with the help of the forum and what I have told you I managed to get my Tab S to turn off, I then boot in to download mode and used Odin to flash stock firmware again
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
lleresche said:
all right almost done downloading the firmware, could you give me the tutorial you followed for bringing your tablet back to life ? or any good tutorial, Helping me to get out
thx again
Click to expand...
Click to collapse
Ok, read my second post I have added a second link for you, follow the unroot instructions.
maxal said:
Ok, read my second post I have added a second link for you, follow the unroot instructions.
Click to expand...
Click to collapse
Got it super cool, wish me luck going for it. I write later if I succeed
Good luck :good:
maxal said:
Good luck :good:
Click to expand...
Click to collapse
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
I don't know which firmware you should have as I don't know where you are from, but I don't think it should make much difference, the firmware I gave the link for is the UK one.
Maybe someone else can help with a link for the correct firmware for you.
lleresche said:
Ok I was about to flash and a quick question pop out, I am almost done downloading SamMobile firmware, My question is if there is a exactly firmware for my device ?, there is information like CSC MODEM PDA; I have absolutely not a clue how to obtain this info, I downloaded the first one because it was the newest, does it make a difference should I be carful ? giving I dont have information about the system how could I find those info giving I cant acces anything ? thx
Click to expand...
Click to collapse
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
DUHAsianSKILLZ said:
Is your model the galaxy tab s 10.5 wifi? Also what country did you get yours tab s
Click to expand...
Click to collapse
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
lleresche said:
I got from Germany I downloaded the newest from Germany, I flashed with Odin, and my tablet IS BAACK TO LIFE!!!!. I will now root again and install a custom rom properly. thank you very much everybody, for a second I really tough I trowed 500$ on the bin :laugh:
Click to expand...
Click to collapse
Well done, and now that you have a copy of your firmware should you have any problems in the future
lleresche said:
Hey guys me again, I have been trying since 2 hours to unbrick my 2 days old Galaxy tab s 10.5, After successfully rooting my new tablet I decided to make a back up of my stock system, I used TWRP recovery to do so, after booting successfully on TWRP, I wanted to make sure I will have a clean image, I manually erased every possible thing on my table by selecting every option on TWRP, once done and on my way to reboot, before quitting TWRP warn me that there wasnt any system, and even with this warning I quit. Result I bricked my tablet hopefully "soft", to get even better I remembered that I didnt had a micro sd card on my tablet and by consequence I must have erase TWRP and every possible restore solution, the table get stuck with the Boot logo and thats it... I can get at least into download mode,. I tried Kies 3 but Im getting an error that my device is not recognized and for Odin I do think is connected but I dont know how to use or what to install or what to do. And I don't get it why my program seems so buggy and I can´t select any of those options.
at least I could root my phone easily.
ps: I did try every possible combination to get into recovery mode and is just impossible there is no way.
if anybody rescue me I seriously cant thank you enough I googled around and did search a lot on the XDA forums, I'm now more scared to tweak around and make things worst , and maybe if not to late permanently dammage it.
Click to expand...
Click to collapse
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
PS: Sorry, but my this question was asked late. I see that already it isn't actual.
porcelana said:
Sir please let me know exactly what you can take on your tablet Download mode for use Odin? I do not understand it well from the description of your problem.
Click to expand...
Click to collapse
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
lleresche said:
Hey Porcelana, I basically bricked my new Tablet, I was only able to acces Download mode, (Odin mode) I than Used Odin 3.09 from my computer to flash my device again.
The issue is fully solved and my tablet is back to life. thank you all again
Click to expand...
Click to collapse
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
porcelana said:
OK, Thanks.
But please keep in mind for the future that the load to your Tab better the original firmware that corresponds to its original CSC Region code. This can help you avoid some of the problems in the firmware flashing. How it may be defined, you can read in this thread:
http://forum.xda-developers.com/galaxy-tab-s/help/how-to-select-correct-firmware-tablet-t3016068/post58500430
Regards
Click to expand...
Click to collapse
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
maxal said:
Hi Porcelana, Can you tell me can you use Kies to down load firmware if you are on a rooted rom?
Click to expand...
Click to collapse
Hi maxal,
Download via KIES will not check root If you do not connect the tablet to a PC. It only checks the serial number and model type of your Tab for search new updates firmware with determine the correct CSC Region code. You can even download the correct firmware by KIES to your PC without having to connect the tablet and then save the file firmware (this requires some tricks) and flash it via Odin. To do this, you need only enter the serial number and model type of the device in KIES menu Tools -> Firmware Upgrade and Initialisation. More details have here:
http://forum.xda-developers.com/showpost.php?p=58527780&postcount=5
In this case you no need connect the tablet to PC. It also confirms ashyx here:
http://forum.xda-developers.com/showpost.php?p=58535945&postcount=7
Regards
Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've not done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.
Majin Kaioh said:
Earlier this evening, after texting a friend, my phone rebooted itself.
It appears to be in a boot loop. It will only reboot into rebooting. Never loads Android. I pulled the battery, let it sit for a few minutes, and tried again with no results.
I've done modding to the phone (mainly because its locked), and will be returning it to my local AT&T store tomorrow. Thankfully I have insurance on my phone, so I shouldn't have an issue getting a new one.
Anybody else had this issue, however? It's really strange.
Click to expand...
Click to collapse
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.
sudoBacon said:
Read a guide on flashing back to stock. Use ODiN and flash the stock file of your choice in the ATT note 4 forum from Download mode. Google how to boot into download mode. Hold those buttons until phone powers off then keep holding until you see download mode. You will need to install samsung drivers and for ODiN on Windows go to Devices coms and ports and change port to 3 in advanced tab.
Click to expand...
Click to collapse
I have had my share of boot looping experiences, never from not doing any type of experiments with my devices. nonetheless myself and I'm sure many other people just do what was mentioned in the quote to alleviate that problem.
i know you (OP) mentioned you don't plan on doing any flashing, but i would do that before using insurance personally, even if there was no deductible
Majin Kaioh said:
I updated my post to add in a missing word. I havn't done any modding. I do not intend to do any flashing to the device.
I'll be returning it to AT&T tomorrow and getting a new one. My question was if anyone has had this issue before. Thanks for your response. Unfortunately, does not address my question.
Click to expand...
Click to collapse
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.
Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
jack man said:
Why not just try to reset the device from the recovery menu? If it's a stock phone it should fix the bootloop.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
It won't fix what sounds like a missing or corrupted boot file, had to deal with it on a LG g3.. restoring a full back up or a plain reset had no effect.. it was either doing a full flash or flashing the boot files
for that phone it would randomly happen when the OTA tried to upgrade the device while it was rooted, took me 3 times of dealing with it before I realized OTA was still live
Small update. My local AT&T store has a replacement being sent to me. I'm unhappy, however, since its apparently a refurbished device. I pay for insurance that covers a new device if something, anything, happens. They're refusing to send me a new one for some reason that they won't explicitly state to me.
My loyalty with AT&T has wavered, and I will probably be on another network in coming months. I'm thinking Sprint so that I can least have an unlocked Note 4.
Regardless, since this device is being sent back, I decided to try and Odin flash it anyways. It did not work. Still boot loops at the Note 4/Android screen. Doesn't even load the AT&T logo. I'm fairly certain something is fundamentally broken with the device. Probably a factory error. It's never been dropped, and has been inside a hard case since day one.
Being that it is a manufacturing error, I'm not to angry about that. These things do happen. AT&T's treatment of me, however, is just unacceptable. I've been a customer for about eight years, and have been on Android since the Motorola Backflip. I upgraded to a Samsung Captivate and never looked at another manufacturor.
Are you able boot to the recovery menu?
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
i have the bootloop issue before to put *#9090#
the loop is every aprox 3 mins
some sugestion?¡
sudoBacon said:
This process is not dangerous if your phone is in a bootloop. Hell AT&T or whatever carrier probably does this themselves if a phone is in this kind of situation. If not rooted or any mods you will still have OTA updates. If you are worried about carrier recognizing if you modded it or something and they wont take it back dont worry just flash it using ODiN. I've rooted many devices hacked compiled roms flashed them and kernels s-offed etc. You can always get back to stock remove flags and your carrier will take it back no matter what just dont return a device with the actual mods on it.
Click to expand...
Click to collapse
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks
thepinkpanter said:
Good evening,
my n910A is stocked in Bootlop ,
I did try also to flash via odin the 4 zipped md5 files from this forum but nothing changed : http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391
when I press volume up+power+home it show LRX22C.N910AUCU1COC4 but the version on the label of my box is N910AUCU1ANIE ,
I don't know if I should go back to the previous version and how to do it ?????
or something else??????
please help because I am lost
thanks
Click to expand...
Click to collapse
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again
sudoBacon said:
Try downloading one of sunderwares stock firmwares in a newer 3.10 odin after extracting the zip with contained files. I recommend latest OC4 just re flash it a different one or try again
Click to expand...
Click to collapse
I already did it but by using Odin 3.09 pls. see http://forum.xda-developers.com/note-4-att/general/to-stock-files-latestcoc4-build-t3107391/page5
maybe I did something wrong
or from where can I get / download a different N910AUCU1COC4 ?
thanks again for your kind help
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
What exactly were you trying to do? I mean normally you hook up old phone and use smart switch to update new phone. So why was you connected to a PC? It does sound like you bricked it.
So now you probably need to flash the ROM.
I read that smart switch is a good and valid source to check for updates. I never thought that an official Samsung software can be so bad at something so basic, resulting in bricking my phone...
Stop using smart switch to update your phone. You haven't hard bricked it because you still have recovery. It's called a soft brick. Download Odin 13.3_3B from here on xda. Do not use the 13.4 because it's suspected to have a fishy call back to a server from a dll that's in the program folder. Download the atch firmware for your model from sammobile or get it in this s20 ultra forum. You should be able to flash the new firmware.
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Julius_GER said:
Thanks @freebee269. Does flashing the firmware with Odin void my warranty or does this only count for rooting devices? (Sorry for stupid questions)
Click to expand...
Click to collapse
Odin uses official firmware from Samsung so no warranty voided.
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
What kind of USB Port did you use?
Try again using a USB 2.0 port, Samsung always had problems with it's software and USB 3.0 ports.
Use USB 2.0 and try again.
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
klantee said:
Hi guys, i have a similar problem as (xReem).
Attached my GT SM-T515/10.1 tab to smart switch where the software was unable to recognise my device!? Was advised to use the Emergency Code function but i have no code due to backing up my data to sd card! I have Magisk and TWRP installed where my device was working beforehand, but since attaching to smart switch, my device is now totally "dysfunctional"!!!
Error message as follows...
...An error as occurred while updating the software. Use the Emergency Recovery function in the Smart Switch PC software. ...
Like i sad, i have no code!!!
I am able to get to the device unlock choice screen and if i choose to restart, my device always boots to the Smart Switch Emergency Code screen?! If i choose the device unlock or download screens, both screens are accessible! Tried to flash my original firmware (BTU-T515XXU3ASK5-20191224095700) using Odin3_v3.14.1 and twrp-3.3.1-6-T515XXU3ASK5-20200215 with no joy (Fail!)
Although i'm totally @"#$%* off about this, as its a new device, i am also curious if someone has ever cracked this... 'Smart Switch No Code' problem before. Hmm...
Anyways, any help appriciated...
Oh! Cannot access recovery at all...
Any help appriciated.
Click to expand...
Click to collapse
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Geekser said:
Did you ever get things working ? If not, when you flashed with Odin - did you use the PATCHED Version ? THis is necessary when flashing firmware via Odin on the S20 Ultra.....
You can download Odin 3.14.1_3b here: https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
Be sure to download the PATCHED version of 3.14.1_3b (it is located as an attached file at the bottom of the first post in the OP at the link above. Hope this helps.
Click to expand...
Click to collapse
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
klantee said:
No, to answer your first question, and yes used the patched version of Odin you state but with no joy.
(would another version of Odin be better for my device model?)
I just need to find a way to flash the original stock recovery. Having the TWRP installed as mentioned earlier is blocking my path, and I have now tripped knox! So no more options available to access the unlock oem screen. Now frp is off, oem is on!
Also, I was wondering if anyone had thought about a totally updated version of the old "ALL IN ONE TOOL" which was available for some earlier makes of phone devices? I think due to manufacturers security upgrades of today's phones we could all do with something like this?
I heard you can do a NAND/Reset wipe via the Odin options screen which would allow you to install a new rom???
Oh, my predicament was based on Julius's post, not xReem. Sorry for the confusion.
Click to expand...
Click to collapse
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Julius_GER said:
Hi guys,
I attached my brand new Galaxy S20 Ultra to my PC and started Smart Switch today. The Software showed an update for my device so I downloaded it and started the update process. Unfortunately, Smart Switch got stuck during the update process at 68%. Nothing happened, cables and all still attached. It just didn't proceed any further for hours.
I decided to take the path of stopping the process, using the key combination shown on my device. It now said, recover your device software with Smart Switch Emergency recovery function. I started this and guess what: it also stopped at 68%.
I "rebooted" the device (volume down + power for approx. 10 seconds) and it starts again in recovery mode.
I manually filled in the recovery code and it seemed like Smart Switch was downloading the OS again. Started the recovery process and it is stuck at 68% again.
Now I am just super afraid that I bricked the device by using Samsungs original software.
Anyone her to help or have similar experiences?
Thanks for any advice on how to proceed.
Julius
Click to expand...
Click to collapse
Hey Julius, did you get your phone to work. I am having the same issue.
Update:
I am good now. I was using the thunderbolt cable that came with the phone and update would get stuck at the same point everything with odin 3.13 and 3.14.
I used a USB 3 to thunderbolt cable that I had from an older phone and it work.
What I used:
Windows 10 x64 1909
USB 3 to thunderbolt cable
USB driver downloaded from Samsung support. I think it is the same driver that comes with smart switch because when I installed it, it prompted
to reinstall driver.
Odin3 v3.13.3_3B_PatcheD from here https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572. ( I think 3.14 will work too.
I really think the cable was the only problem)
Firmware downloaded with SamFirm
klantee said:
Thanks for the advice. I'll try what you suggest and see what happens. Stay well!
Click to expand...
Click to collapse
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
ASHLEY117 said:
Open Odin as administrator and if using a stock AP file always use the HOME-CSC of the same firmware in CSC slot. Sometimes Odin plays the fool and gets stuck.
Click to expand...
Click to collapse
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
klantee said:
Wow! This nearly worked!!!
Managed to get a (((PASS))) on Odin and my tab actually rebooted into the Samsung logo!!!
Soon after this though tab immediately Boots back into download mode??? Tried the same steps but without any progress???
I feel I'm close to cracking this but need some more advice on how to build on such "progress"!?
Many thanks for your advice...
Click to expand...
Click to collapse
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
ASHLEY117 said:
Try with all slots filled but with CSC file not HOME-CSC. That may help as it flashes pit file to factory reset
Click to expand...
Click to collapse
Tried your suggestion with no joy. Will keep trying though as I feel this issue can be cracked. Many thanks...
Geekser said:
Sorry for your troubles - wish I could help you but you have done everything I would have tried. Maybe, if you haven't already done this - leave the phone on until the battery runs out completely. Then, recharge the phone for a while so the battery has some juice again and then get the phone back into download mode by pressing volume up and volume down at the same time - then plug in the USB - it shoul.d launch into download mode again - then try flashing again with the patched odin.
If you have already done this - then I don't know how what else to suggest.
I wish you luck and hope you are able to get things working again.
Click to expand...
Click to collapse
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
klantee said:
(((SUCCESS)))!!! :laugh::laugh::laugh:
Done what you suggested by waiting until my battery ran out!
I downloaded a different software version and as soon as I plugged my tab into my PC with USB, i flashed the new software with no problems!!!
Flashed TWRP, Magisk and Multidisabler problemless the same!
The lesson learnt here...
...(ONLY FOR THOSE WHO KNOW WHAT THEY ARE DOING)...
...is to probably only have 30% battery when flashing!!! This way you won't have to wait weeks for such a large capacity battery to run down, like I did!
I knew I'd crack it!
Click to expand...
Click to collapse
Glad I could hel;p- I know how frustrating it is when things seem like you can never get things to work - anyway - best of luck - and be sure to hit thanks If I helped you.
Hi Do you lose your data (vids and pics) via this method? i have had same thing happen on my s20+
Hi all, I just had a problem yesterday of which my watch not booting to OS. This morning I tried to flash firmwares via NetOdin, all passed but still no working. Only booting to Samsung Galaxy Watch Logo and then black screen. Any suggestions? Thanks
A
Can you post Photo or text from Odin Screen?
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You can leave Download Mode by holding Power Key few Seconds...
B
Is Download Wireless still working?
Or did you tried Recovery option in Reboot Menu?
Best Regards
adfree said:
A
Can you post Photo or text from Odin Screen?
https://forum.xda-developers.com/showpost.php?p=73607036&postcount=1
You can leave Download Mode by holding Power Key few Seconds...
B
Is Download Wireless still working?
Or did you tried Recovery option in Reboot Menu?
Best Regards
Click to expand...
Click to collapse
Download mode and wireless download mode can boot into as normal except recovery. I also can reflash firmware as normal but after completed Watch not boot to OS. Only Samsung Logo. Thanks
Looks good.
SM-R805U :good:
Reactivation Lock OFF :good: :good:
Warranty V. 0 0x0000
Samsung Official :good:
Official :good:
My suggestion.
Flash Combination Firmware.
Check this:
Code:
Serial Number is visible
IMEI is visible
WiFi address visible
BT address visible
Sometimes something to CSA partition could happen...
And hang on Logo remembers me on Security reason...
Gone IMEI is 1 Security Reason...
Best Regards
adfree said:
Looks good.
SM-R805U :good:
Reactivation Lock OFF :good: :good:
Warranty V. 0 0x0000
Samsung Official :good:
Official :good:
My suggestion.
Flash Combination Firmware.
Check this:
Sometimes something to CSA partition could happen...
And hang on Logo remembers me on Security reason...
Gone IMEI is 1 Security Reason...
Best Regards
Click to expand...
Click to collapse
Yes I did. I have flashed combination firmwares of 3 different builds. All flashes was successful but still no luck to boot to OS. Thank you very much for trying to help.
Yes I did. I have flashed combination firmwares of 3 different builds. All flashes was successful but still no luck to boot to OS.
Click to expand...
Click to collapse
Are you sure we mean the same?
A
I have forgotten...
Why you only choose 1 file... if you need to flash 4 files.
From your first post... Odin Screenshot
B
With Combination Firmware I mean this:
Code:
[B]COMBINATION[/B]-FT40_R805USQU1ASL2.tar.md5
This time 1 single file... so only 1 file to choose in netOdin
Summary:
Normal Stock Firmware looks like this:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
I can count 4 files...
So you need to flash 4 files.
Best Regards
adfree said:
Are you sure we mean the same?
A
I have forgotten...
Why you only choose 1 file... if you need to flash 4 files.
From your first post... Odin Screenshot
B
With Combination Firmware I mean this:
This time 1 single file... so only 1 file to choose in netOdin
Summary:
Normal Stock Firmware looks like this:
I can count 4 files...
So you need to flash 4 files.
Best Regards
Click to expand...
Click to collapse
I did flash with normal stock firmware consisted of 4 files. On screen shot I just tried one file only. Thanks
I will try to collect few Firmware Links to free available Combination Firmware...
Need some time...
I will update this post...
Best Regards
adfree said:
I will try to collect few Firmware Links to free available Combination Firmware...
Need some time...
I will update this post...
Best Regards
Click to expand...
Click to collapse
Thanks tomorrow I will try to flash again more specifically v4.O. Thank you a lot for your kind help!
https://samsungcombinationfile.com/samsung-sm-r805u
Here is for instance:
Code:
COMBINATION-FT40_R805USQU1ASA1.tar.md5
Only try if out of luck with Flashing 4 files from Stock Firmware.
Best Regards
adfree said:
https://samsungcombinationfile.com/samsung-sm-r805u
Here is for instance:
Only try if out of luck with Flashing 4 files from Stock Firmware.
Best Regards
Click to expand...
Click to collapse
I tried but still no luck of working. Thanks
Okay, this is bad... if Combination Firmware not boot...
Last attempt... flash all 4 files with netOdin:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
After this, if again out of luck... please post Photo from Download Mode again...
So we can check Warranty Void info... if still:
Code:
0 0x0000
Something bad happens to your GW...
And you can not fix this at home... :crying:
If Warranty still 0 0x0000 try to send to Repair Service...
Best Regards
adfree said:
Okay, this is bad... if Combination Firmware not boot...
Last attempt... flash all 4 files with netOdin:
Code:
BL_R805USQU1CSL2_usr.tar.md5
AP_R805USQU1CSL2_usr.tar.md5
CP_R805USQU1CSL2_CL1315275_QB14780771_SIGNED.tar.md5
CSC_OYN_R805UOYN1CSL2_usr.tar.md5
After this, if again out of luck... please post Photo from Download Mode again...
So we can check Warranty Void info... if still:
Code:
0 0x0000
Something bad happens to your GW...
And you can not fix this at home... :crying:
If Warranty still 0 0x0000 try to send to Repair Service...
Best Regards
Click to expand...
Click to collapse
I tried but still not working. Yes my Watch is still this code in 0 0x0000 but I bought with no warranty.
Thank you very much for trying to help me out. Sure, I will seek for repair service at my local place.
I planned to bring my Galaxy Watch for repairing tomorrow's morning. But luckily just about 5 minutes ago I have just pressed turn on unintentionally. And it was booting up and working now. Unbelievable it started working fine. Thanks @adfree for trying to help in last few days.
Hello, I am having a similar issue with my Samsung Galaxy watch SM-R805U, I just downloaded the combination file and I will try to load it tomorrow.
But is there a successful method to get this watch functioning again, without having to repair it?
Leakhanak said:
I planned to bring my Galaxy Watch for repairing tomorrow's morning. But luckily just about 5 minutes ago I have just pressed turn on unintentionally. And it was booting up and working now. Unbelievable it started working fine. Thanks @adfree for trying to help in last few days.
Click to expand...
Click to collapse
What was the last thing you did to get it working? Combo firmware.
sektor1952 said:
What was the last thing you did to get it working? Combo firmware.
Click to expand...
Click to collapse
You may try the Combo firmware. My watch since then is working and have updated to the latest firmware. Good luck!
Leakhanak said:
You may try the Combo firmware. My watch since then is working and have updated to the latest firmware. Good luck!
Click to expand...
Click to collapse
I tried the combo firmware and it was the same result, also is the combo firmware supposed to show some extra text during boot?
And you flashed it on the AP line?
sektor1952 said:
I tried the combo firmware and it was the same result, also is the combo firmware supposed to show some extra text during boot?
And you flashed it on the AP line?
Click to expand...
Click to collapse
Yes on the AP line. At last attempt, please try to flash all 4 files of stock firmware with netOdin. Good luck!
Leakhanak said:
Yes on the AP line. At last attempt, please try to flash all 4 files of stock firmware with netOdin. Good luck!
Click to expand...
Click to collapse
I did that too and wound up with the same result.