COMPLETELY disable DTS:X - LG G8 Questions & Answers

hey
I own a rooted G8s running Viper4Android. When activating the equalizer basses don't get through at all and voices get muffled when there should be bass.
Today I bought another pair of in-ears to test if maybe the earphones are the problem but nope, it's not them - I bought the ones I used for years on other phones and V4A always gave me amazing bass.
I now suspect LG's weird equalizer to impact/mess with V4A and wanna know if there is a way to completely disable it. Even when set to "normal" it still seems to be processing which is absolutely not what I want.
EDIT: Found it! Had to go to the audio_effects.xml in /vendor/etc and edit out all entries containing "eagle" (aka the codename for DTS)

Related

Distorted bass (headphone jack)

I am having a problem with the headphone output. When listening to anything bass heavy... such as house music, the bass is distorted. Its sounds almost as if the headphones I am using are blown. I know this is not the issue because I have tested several different pairs, all with the same result. I even experience this when I have the phone hooked up to my car stereo. Volume isn't an issue and everything else seems to sound fine... its just that bass notes and kick drums sound horrible.
I'm coming from a Vibrant which was a powerhouse with voodoo sound enabled.
I understand that the Yamaha dac in the SGSII is nowhere near as good as the Wolfson used in the SGS... but it shouldn't sound this bad?!?!
I have tried just about every audio/dsp app available to no avail.
Does anyone else have this issue?
Also... not sure if it matters but I am running Juggernaut v3.7
Any help would be greatly appreciated.
hmm I was going to suggest you get power amp and just turn down the overall level in the eq. that might help in troubleshooting where in the signal chain the distortion is coming from. If it remains distorted at low level i would assume it wsa a hardware problem.
Ive certainly not any problems with distortion as long as i keep good gain structure in my eq.
I have tried power amp. I also tried lowering all the levels down. Nothing works
I forgot to mention that the problem exists even at the lowest volume settings... quite fustrating
I really hope it isn't faulty hardware... not sure ill be able to get a replacement
Completely different hardware but I had this issue on my HD2 after either making the lower frequency settings too high with other DSP or equalizers or when I used root level volume boosters like Volume Hack+
Are you using a stock (non-flashed non-rooted) build? If not, you can try a nand backup and flash a fresh install of your ROM. Not installing anything and go back to the same songs to see if they distort.
The SGS2 can push a good amount of low frequency granted you have earphones/equipment that can pick up low frequency output. I use it in my cars and with my Sennheiser headphones with no real issues and great output. Even with max volume, no distortion.
The HD2 was capable of only so much before it distorted but I haven't been able to replicate the issue with my SGS2. But then again, I haven't installed DSP or any other 3rd party volume/equalizer apps.
Im running juggernaut 3.7 w/ bullet kernel. To be honest I didnt check what it sounded like prior to rooting and flashing the custom rom. I only installed the dsp apps to fix the problem.
A new release just came out so I will take your advice, wipe and start with a fresh install.
Hope it fixes the problem.... its really driving me nuts.
Have you tried a different ROM? If not, try CM7 Alpha v3. Theres nothing like CM's DSP Manager.
Make a NANDROID backup first, that way if the problem still persists, you can always easily switch back to your current ROM.

Dragonfly red USB-DAC loudness issue / 5x / Stock ROM

Hey guys,
I just bought a nice USB-OTG DAC for Hi-Fi sound, the Audioquest Dragonfly Red. I really like the augmented sound it delivers - although I noticed a major drawback:
The maximum sound is strongly limited due to a false recognition of the true max volume by the phone. Loudness is controlled by the phone digitally, there're no buttons on the device itself.
According to my research, it is a known issue that the device is always started with level 22 of possible 64 levels of volume. This is intended to prevent harm to one's ears. But Android phones mistake level 22 as the total maximum and don't allow to go any louder. The manufacturer says that this can only be corrected over the ROM. There IS a workaround by using 'USB audio player pro', because this app directly controls the sound output. BUT, I want to listen to Spotify and Tidal, and these apps do NOT allow sound output control.
Any ideas?
I think the problem can be fixed by disabling safe headphone volume (can be done via GravityBox, not sure if there is another method) or redictering audio using SoundAbout app.
Both methods require root privileges and in my opinion this isn't a solution you're looking for.
Just sharing my ideas.
Yeah, redirecting sound output is about what I would have guessed. I just wanted to check if there's already a working solution for non-rooted devices before rooting mine.
The thing is, that I tried a couple of USB-OTG DACs, and only the Dragonfly red is having this issue. Unfortunately it's also the best sounding one...
you can find poll on reddit.
Alright, it's working with USB audio player pro. But - one major drawback:
Although Tidal is supported, this workaround does not allow for playback of offline Tidal tracks... So still no solution that'll work in everyday life...
I spent last few hours to look for options for making the Dragonfly Red work with my Z3C. This post on Pixel 2 https://forum.xda-developers.com/pixel-2-xl/themes/pixel-2-usb-audio-control-t3704024 works perfectly to significantly increase the Red's volume, however, its interface doesn't fit properly on smaller screens (HD on Z3C).

Sound Drops Down When The Bass Hits

Hello, i use bluetooth headphones to listen music and i like strong bass. I use Viper4Android to boost the bass and I recently changed my ROM from Fulmics 6.9 to XenonHD 7.1.2. I never had this issue on Fulmics but in every AOSP-Lineage based ROM, when the bass hits, the sound level drops significantly and turns back after the bass. I though Apt-x might be the reason of this since Android does not support Apt-x originally. I tried flashing the Apt-x zip that's roaming around on xda forums but it resulted in broken bluetooth so i had to flash the ROM again. Any suggestions? Thank you
TheGalata said:
Hello, i use bluetooth headphones to listen music and i like strong bass. I use Viper4Android to boost the bass and I recently changed my ROM from Fulmics 6.9 to XenonHD 7.1.2. I never had this issue on Fulmics but in every AOSP-Lineage based ROM, when the bass hits, the sound level drops significantly and turns back after the bass. I though Apt-x might be the reason of this since Android does not support Apt-x originally. I tried flashing the Apt-x zip that's roaming around on xda forums but it resulted in broken bluetooth so i had to flash the ROM again. Any suggestions? Thank you
Click to expand...
Click to collapse
In Viper(ver 2.5.0.5) settings under "FX compatible mode" switch from normal to compatible and see if that helps.
Also to avoid any conflicts I usually uninstall whatever sound app comes included with the ROM(if there is one), so maybe give that a try as well.
startswithPendswithOOH said:
In Viper(ver 2.5.0.5) settings under "FX compatible mode" switch from normal to compatible and see if that helps.
Also to avoid any conflicts I usually uninstall whatever sound app comes included with the ROM(if there is one), so maybe give that a try as well.
Click to expand...
Click to collapse
I've just tried switching to compatible mode but it didn't help. I've also uninstalled the AudioFX already that came was incluede in the ROM but didn't work. Thanks for your help anyway
TheGalata said:
I've just tried switching to compatible mode but it didn't help. I've also uninstalled the AudioFX already that came was incluede in the ROM but didn't work. Thanks for your help anyway
Click to expand...
Click to collapse
No problem...sorry I couldn't help. Maybe someone else can :good:
*Unticking viper bass or just lowering the sliders(63,125, 250) a little should help, but if you're a basshead then those are not ideal for you.
I would suggest trying to built in equaliser.
It has a manual equaliser and bass booster option on top of that, which if you set to a 100 percent you can easily break the sound.

Bluetooth audio quality question

Hello. I change phones alot and have noticed that some phones(all android) have better bluetooth playback than others.
I had a oneplus 7 pro before this phone and the bluetooth quality to my truck was great and had no issues but with this phone the highs sounds scratchy or like if the speaker is bad. But if i connect it with a wire connection it sounds great. Everything with the 2 phones is the same. On both i was using the galaxy watch and pretty much the same apps. On a previous phone the note 8 i had the same issue but it was a different car. Seems like its the way samsung handles bluetooth.
Has anyone had this issue? If so was there a fix?
Thanks
make sure not on mic
Sent from my SM-N975F using Tapatalk
jemfalor said:
make sure not on mic
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
What do you mean?
The only two things I think about is the codec used that may be different across devices, and the Bluetooth settings that sync the phones volume with the headset (the differences are noticeable).
Since no DAC is used in Bluetooth, I don't think it can comes from them, for a same headset.
On Samsung phones you should run the adapt sound process. Try this.
I tried with the sync volume off too and no improvement.
I looked for the adapt sound and my phone doesn't have that setting. Or is it something different?
It's in Sounds and Vibration 》 Advanced Sound settings 》Sound Quality and effects 》 Adapt sound
You have to do this in a quiet place and ensure to answer honestly. If you can't hear the beeping press no.
After doing this the sound quality is night and day difference.
Ok found it. Ill play with it a bit. Thanks
I've had issues sometimes with audio being piped through the "Calls" Bluetooth channel versus the "Audio" channel so worth checking as the quality is obviously night and day.
I also like enabling Dolby Atmos on my Note 10+ for music so worth playing with too. Additionally, I recently found Samsung's Sound Assistant app which let's you customize a bunch of sound settings so worth checking out as well:
https://play.google.com/store/apps/details?id=com.samsung.android.soundassistant
sansnil said:
I've had issues sometimes with audio being piped through the "Calls" Bluetooth channel versus the "Audio" channel so worth checking as the quality is obviously night and day.
I also like enabling Dolby Atmos on my Note 10+ for music so worth playing with too. Additionally, I recently found Samsung's Sound Assistant app which let's you customize a bunch of sound settings so worth checking out as well:
https://play.google.com/store/apps/details?id=com.samsung.android.soundassistant
Click to expand...
Click to collapse
Is there an easy way to tell if the audio is going through the call channel?
ErickF said:
Is there an easy way to tell if the audio is going through the call channel?
Click to expand...
Click to collapse
Easiest is probably just uncheck calls in your phones BT settings for your truck (and make sure audio is enabled). If the sound is still not great then this isn't the issue.
Sorry to respond to an old thread, but I was wondering if any of this fixed the OP's problem. I followed all the recommendations here and on other threads but have not been able to solve my recent Bluetooth audio problem. The sound has been terrible lately.
Same issue here on my s10+. When playing any audio in my car via BT i hear the distortion/hissing noise especially when the song has a higher treble frequency.
I have just about tried all fixes i could find on Google, and no luck.
When connecting to my ear buds (Jabra Elite 65t) it disappears and checked in developer mode that it supports to AAC for BT Codecs.
But when connecting to the car it reverts to SBC.
The issue clearly lies on Samsungs side, as my brother has a Huawei p30 Pro, also has bluetooth 5 and plays amazingly well in all aspects (Bass-Mids-Treble).
I know I'm posting this almost a year later, but i am desperately looking for a fix.
SN. I have recently updated my phone to Android 10, despite all the complaints to Samsung from many users... Sadly this issue has not being fixed on my side.
From what i see online, people have given up on Samsung and opted for Rooting their Samsungs and installing Viper4Andriod.
Has any one done this and can confirm that it fixed the issue?

Question Low Bluetooth volume on true wireless earbuds Xiaomi 11T

First, I apologize I'm posting in this forum regarding Xiaomi 11T, but there are no similar cases in it's forum.
So I recently bought Xiaomi 11T, about a month ago, and the volume on my true wireless earbuds is extremely low compared to my older phone (Xiaomi Mi A1), which was running on Android 9. Same is the case when I use earbuds with laptop (and the laptop has a much older Bluetooth version 4.2, I guess). So I looked it up and did find a possible solution but the phone had to be factory reset to solve through that solution, which I don't want to do because it's frustrating doing it all again. *I tried solving (linked below) this by following the steps except the resetting one, but it did not solve this issue. *I have already tried changing the region. I'm in Pakistan, so I changed it to US, India and also restarted and re-paired the earbuds, but it still didn't solve.
So is there any way that I can solve the low volume issue without resetting the phone?
DO NOTE that "Disable absolute volume" option in developer options is TURNED OFF.
Solution which requires resetting the phone
I copy-pasted this from my post in Xiaomi 11T Pro forum, but found no solutions.
So please let me know if any of you know any solutions to this issue.
I'm not an expert, but I remember some things of time ago:
1. EU rom has some limitations for earphones volume due to European regulations, so you would need to change the region or even the rom if this is your case.
2. Disable "absolute volume" in your paired Bluetooth device (your TWS), I know you have disabled it in developer options, but look for that same option in the paired device section.
3. Enable MI Sound Enhancer and try with the different options. It always helps me to improve the audio.
Please share your results, if this doesn't work, I will look for my earbuds and try to remember what I did to fix that.
Add: Also, if your earbuds have integrated volume control buttons, check if the volume control is "synchronized" with the phone, first time I use my earbuds in my Poco F3, the volume of the earbuds and the phone was independent.
Add 2: I take a look at my earphones, if you disabled absolute volume, you need to turn up the volume directly from your earphones. I have enabled absolute volume because of that.
Hi. Thank you for the reply.
1 ) I have tried changing the region and it still was the same.
2) I don't have the option for disabling "Disable Absolute volume" in Bluetooth section paired device section, nor in the advanced settings, as shown in the screenshot below.
3) Mi Sound section is grayed out for me, even when the earbuds are connected.
I did notice that earbuds and phone are not synchronized. Volume of earbuds is adjusted separately to the volume of the phone. So how do I sync them? Please let me know.
White T-Poison said:
Hi. Thank you for the reply.
1 ) I have tried changing the region and it still was the same.
2) I don't have the option for disabling "Disable Absolute volume" in Bluetooth section paired device section, nor in the advanced settings, as shown in the screenshot below.
3) Mi Sound section is grayed out for me, even when the earbuds are connected.
I did notice that earbuds and phone are not synchronized. Volume of earbuds is adjusted separately to the volume of the phone. So how do I sync them? Please let me know.
Click to expand...
Click to collapse
Hi,
To synchronize the volume of both devices, just enable absolute volume again, we already know that's not the problem, so do it.
MI 11T has atmos right? Change sound preset to video and try with the next set up in atmos settings.
Also, you can try disabling "sound enhancement" from game booster options.
If you have enabled absolute volume again, changed the preset to video, tried the setup in atmos settings, disabled the sound enhancement from game turbo, and the issue is not fixed, I can't help you, but I will be pretty sure that the problem will be the earbuds.
Edit: You could play with the sound codecs of developer settings as last resource.
ErickBls said:
Hi,
To synchronize the volume of both devices, just enable absolute volume again, we already know that's not the problem, so do it.
MI 11T has atmos right? Change sound preset to video and try with the next set up in atmos settings.
Also, you can try disabling "sound enhancement" from game booster options.
If you have enabled absolute volume again, changed the preset to video, tried the setup in atmos settings, disabled the sound enhancement from game turbo, and the issue is not fixed, I can't help you, but I will be pretty sure that the problem will be the earbuds.
Edit: You could play with the sound codecs of developer settings as last resource.
View attachment 5565905
Click to expand...
Click to collapse
I enabled "Disable Absolute volume" as you said, and set the preset to Video as well. And this is as close as I could get with the equalizer settings (they're horrible to set). And there is a positive difference than before. But it still isn't as loud as before or with other devices.
And I couldn't find any "sound enhancements" in Game Turbo.
There is no option of Media Volume sync, as it is in Samsung. I tried looking it up and it said that it is now built-in Android 10 onwards? I don't know.
But I tried the earbuds with laptop, and they're so much better, just like before. And I change the Bluetooth codec to AAC, but it automatically reverts back to SBC. I don't know anything about audio or codecs. So any guesses
ErickBls said:
Hi,
To synchronize the volume of both devices, just enable absolute volume again, we already know that's not the problem, so do it.
MI 11T has atmos right? Change sound preset to video and try with the next set up in atmos settings.
Also, you can try disabling "sound enhancement" from game booster options.
If you have enabled absolute volume again, changed the preset to video, tried the setup in atmos settings, disabled the sound enhancement from game turbo, and the issue is not fixed, I can't help you, but I will be pretty sure that the problem will be the earbuds.
Edit: You could play with the sound codecs of developer settings as last resource.
View attachment 5565905
Click to expand...
Click to collapse
I think this option (Adjust sound to earphones) might help, since it looks like media sync option. But I don't know why Mi Sound is grayed out.
White T-Poison said:
I enabled "Disable Absolute volume" as you said, and set the preset to Video as well. And this is as close as I could get with the equalizer settings (they're horrible to set). And there is a positive difference than before. But it still isn't as loud as before or with other devices.
And I couldn't find any "sound enhancements" in Game Turbo.
There is no option of Media Volume sync, as it is in Samsung. I tried looking it up and it said that it is now built-in Android 10 onwards? I don't know.
But I tried the earbuds with laptop, and they're so much better, just like before. And I change the Bluetooth codec to AAC, but it automatically reverts back to SBC. I don't know anything about audio or codecs. So any guesses?View attachment 5565927View attachment 5565929View attachment 5565931
Click to expand...
Click to collapse
First, please resize the images you attached in the comments, are huge.
The "enhanced audio" option is in "Performance mode".
Now I remember MI Sound Option is only available for wire earphones.
Even if disabling Enhanced Audio from Gameturbo don't fix the issue , keep it disabled. If it is enabled, when you start some game or app that use game turbo, the sound turns to sht.
The absolute volume feature must be enabled to sync the volume of both devices.
Honestly, I have no idea what else could you try; well, yes, some equalizers have the option to artificially increase the volume, maybe that could solve the problem in some way.
In my experience, the loudness enhancer of Equalizer FX works very well.
If FX doesn't work, try the app "Boom" by GlobalDelight, It has a free trial, imo is the best app for music (super recommended for windows too), and when I use it, my head explodes if I turn up full volume.
(Picture from Google)
ErickBls said:
First, please resize the images you attached in the comments, are huge.
The "enhanced audio" option is in "Performance mode".
Now I remember MI Sound Option is only available for wire earphones.
Even if disabling Enhanced Audio from Gameturbo don't fix the issue , keep it disabled. If it is enabled, when you start some game or app that use game turbo, the sound turns to sht.
The absolute volume feature must be enabled to sync the volume of both devices.
Honestly, I have no idea what else could you try; well, yes, some equalizers have the option to artificially increase the volume, maybe that could solve the problem in some way.
In my experience, the loudness enhancer of Equalizer FX works very well.
If FX doesn't work, try the app "Boom" by GlobalDelight, It has a free trial, imo is the best app for music (super recommended for windows too), and when I use it, my head explodes if I turn up full volume.
(Picture from Google)
View attachment 5565945
Click to expand...
Click to collapse
Sorry for the huge images. I new to posting threads, so I don't have much experience or etiquettes of threads.
I have turned off Enhanced audio and turned on "Disable Absolute volume", and still audio is not synced. And just increasing the volume isn't my goal. Rather I want it to work properly, as intended.
Anyways, do you think that the solution that I have linked in the original post, would work?
White T-Poison said:
Sorry for the huge images. I new to posting threads, so I don't have much experience or etiquettes of threads.
I have turned off Enhanced audio and turned on "Disable Absolute volume", and still audio is not synced. And just increasing the volume isn't my goal. Rather I want it to work properly, as intended.
Anyways, do you think that the solution that I have linked in the original post, would work?
Click to expand...
Click to collapse
Disable Absolute Volume has to be turned off, not on, I mean, you need to have absolute volume enabled.
Try with FX loudness enhancement, could work.
Idk if the post solution will work, but I think you need to try.

Categories

Resources