Hi, i have a gear watch r800 ITV CSC. In recent days an update has been released with the 4.0.0.7 system. I had the 4.0.0.6 system and I changed the CSC setting to XAR. I got the new update but now the command launch_app csc-manager.csc-pre-configuration not work. Sdb find the wear and I can navigate with sub shell but when I send the command I have the following message: launch_app csc-manager.csc-pre-configuration ... successfully launched but in the gear not appear nothing.
Have solution?I have tried various versions of sdb.
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
adfree said:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Look into this thread...
Maybe similar way work with SM-R800... SM-R810...
Combination Firmware for SM-R800 is for instance here:
https://forum.xda-developers.com/showpost.php?p=80895699&postcount=5
Be carefully... UNTESTED aaand:
At your own risk!
Best Regards
Click to expand...
Click to collapse
this method downgrade my gear?
mago988 said:
this method downgrade my gear?
Click to expand...
Click to collapse
I'm also curious how to change CSC on 4.0.0.7
works like a charm with Samsung pay!!!!:good:
I changed my CSC to Australia to get the Samsung Pay but this disabled VoLTE on my watch. I m now not able to call or receive any calls. I m from India. Watch was originally purchased in Australia.
During this process I was prompted for update which I did and now I m stuck with 4.0.0.7 version and no way to change the CSC back to INU using shell access way.
Only way now looks to use the combination firmware and Odin. But not sure where to find the Combination Firmware for SM-R805F LTE version.
Anyone can point me to right direction to get the required binaries ?
Device Details:
AP : R805FXXU1FSL4
CP: R805FXXU1FSL4
CSC: R805FOXX1FSL4
Hi all can somebody help installing Samsung Pay for India
I connected watch through sdb connect and when i run
command launch_app csc-manager.csc-pre-configuration it says successfully launched but nothing happens on my Galaxy Watch verion R800XXU1DSL1 tizen 4.0.0.7
Used SDBstarterKidv1
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
After downgrade and changing the region to enable Samsung pay.
If I again update to the latest firmware version will the Samsung pay still be there?
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
congusto said:
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
Click to expand...
Click to collapse
i downgraded changed the CSC, now samsung pay is on the watch but it wont open on my phone
I have a same problem too. "successfully launched" but nothing happend
R805FXXUFSK2
SM-R805FZSATMH
The downgrade is it the solution for me ? Which version ?
The downgrade is it the solution for me ? Which version ?
Click to expand...
Click to collapse
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
adfree said:
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
Click to expand...
Click to collapse
My CSC with the magic code is R805FOXA1FSK2
AP: R805FXXU1FSK2
CP: R805FXXU1FSK2
Hi guys, I'm from Brazil, and my FW is the R810XXU1DSL1.
I need to change the csc to ZTO... same problem, nothing happens.
Can some one help me?
What downgrade do I have to do?
You need to downgrade to any firmware older than DSL1 with NetOdin, as described elsewhere on this forum. Then changing the CSC will work.
Hi. I have the same problem. I'm now going to downgrade with the procedure in this topic.
I just have a doubt about which firmware I should use. This are my current info:
Watch: SM-R800
One UI: 1.5
Tizen: 4.0.0.7
Current FW: R800XXU1DSL1
Knox: 2.4.0
Bought on USA
Need to enable Samsung Pay in Brazil (I believe need to be changed to ZTO)
Can someone please which firmware I should try? First and second options?
Thanks.
adfree said:
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
Click to expand...
Click to collapse
On phones, usually downgrading can result in brick.
In the galaxy watch this does not happen can I downgrade to a previous version without fear of it happening?
any update yet guys
i am stuck with tyhe same problem.is there a way solution yet?
Hi!
I recently switched the region of my Galaxy Watch Active (SM-R500) from International to UK. However, the stock software I flashed is lower than the most recent update and the wearables app states that it up to date. What can I do?
Model Number: SM-R500
Software Version: R500XXU1ASAD // Tizen Version: 4.0.0.3
Thank you!
Try DSL1 with netOdin...
https://www.file-upload.net/download-14134409/R500XXU1DSL1.7z.html
Remember...
OWN RISK!
Best Regards
I'll try it, thank you! I'm guessing that flashing the lower firmware broke the auto updater or something like that?
Hello,
I want to Update FW R810XXU1DSL1 to R810XXU1DTG1 but my CSC is TUR (TUR's final fw is dsl1)...
Will it brick after the update? I don't need samsung pay. Do I have to downgrade and change CSC?
Thank you..
edit: first I downgraded to BSA4 .. changed csc to XAR.. updated two times with ota.. done! now its on DTG1!
Hello guys,
I changed the csc to XAR using sdb and Odin to flash my watch with the older tizen os. And now whenever I try to update my os it tells me that this is the last update found ...
I have the galaxy watch 2018 42 mm model, SM-810
What can I do ?
Thanks in advance,
And best regards,
Alex!
?
Firmware Version on Device?
Easiest way with FULL details... type this code like you would call someone...
*#1234#
Best Regards
Thanks for your fast reply! I somehow managed to have Samsung Pay installed and get the latest Tizen 5.5.0.1 installed! I will share my experience in case someone else is having issues with updating Tizen after downgrading !
Here is how it worked out for me:
First I downgraded my Tizen OS with Odin to the following software:
R810XXU1CSI1 Tizen 4.0.0.4 ( Downloaded from here: https://disk.yandex.ru/d/TPWpD1y1CE6Sig )
Then I used the SDB kit to change my region to XAR. ( You can search how to change the region on your watch in the XDA forum search box ).
Then I googled Samsung Pay watch plug-in apk. ( Downloaded from here: https://www.apkmirror.com/apk/samsung-electronics-co-ltd/samsung-pay-watch-plug-in/ )
Installed it - it showed on my watch and in my Gear App.
So far so good.. but It didnt want to update to Tizen 5. It was stuck on Tizen 4.
So I flashed this firmware with Odin: R810XXU1BSA4 Tizen 4.0.0.1 ( Downloaded from here: https://mega.nz/#!vg8k3AbA!zcUGtSJPzEdo_PKs_8_u0M6evKXfmQysfK4cZHOkJW8 )
And I managed to update the watch with all the updates and Samsung Pay didnt get removed .
P.S. - This is how it worked out FOR ME!! You can try to change the region with the last firmware - it might as well work out for you too !
I hope I helped with my experience. This is firmware only for the SM-R810 watch model! If you flash it on another watch it might get bricked !
And again thanks to @adfree for replying !