Hi!
I recently switched the region of my Galaxy Watch Active (SM-R500) from International to UK. However, the stock software I flashed is lower than the most recent update and the wearables app states that it up to date. What can I do?
Model Number: SM-R500
Software Version: R500XXU1ASAD // Tizen Version: 4.0.0.3
Thank you!
Try DSL1 with netOdin...
https://www.file-upload.net/download-14134409/R500XXU1DSL1.7z.html
Remember...
OWN RISK!
Best Regards
I'll try it, thank you! I'm guessing that flashing the lower firmware broke the auto updater or something like that?
Related
Hello!
Just purchased a Samsung Galaxy Watch in Dubai. I live in Spain, so I would like to use Samsung Pay in that country. However, I can only configure Samsung Pay as United Arab Emirates. I have read that in order to make it work, I have to flash the specific firmware for the desired location (in this case, Spain) with Odin. I have found some tutorials on how to do that, but I cannot find the appropiate firmware for my device. Here is the info:
Model number: SM-R800
Tizen version: 4.0.0.1
Software version: R800XXU1BRK3
Has anyone done this before? Where can I find the appropiate firmware?
Thanks!
You don't have to flash firmware specific to the desired location, you have to update the csc (also resets the watch) to represent the location you want.
How to: https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
CSC list: https://forum.xda-developers.com/showthread.php?t=2546689
For me, I purchased the international version in the US and Samsung Pay did not work in Sweden, I changed the csc to NEE (nordics) following the guide above and I can now use Samsung Pay in Sweden.
Maybe this attached Video explain "something":
https://forum.xda-developers.com/showpost.php?p=78938105&postcount=726
It is possible with Watch Face to:
A
Verify... check active CSC/Sales Code
B.
Change CSC/Sales Code
Only problem at the moment...
Such Watch Face not in Store... """Security reason"""...
And...
Best Regards
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
I can't get the update to One UI 1.5 announced here, could I change my CSC to other country, update my device and change again to my original CSC?
Make that would disable Samsung Pay in my Galaxy Watch?
How could I check what regions have the latest version of One UI?
Hi for the France... 2020
jordi.badia said:
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
Click to expand...
Click to collapse
How to change csc? I have galaxy watch 46mm SM- R800
I from Malaysia, my watch buy from Australia. Cannot using samsung Pay
Tizen 4.0.0.7
R800XXU1DSL1
Hi all can somebody help installing Samsung Pay for India
I connected watch through sdb connect and when i run
command launch_app csc-manager.csc-pre-configuration it says successfully launched but nothing happens on my Galaxy Watch verion R800XXU1DSL1 tizen 4.0.0.7
Used SDBstarterKidv1
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
After downgrade and changing the region to enable Samsung pay.
If I again update to the latest firmware version will the Samsung pay still be there?
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
congusto said:
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
Click to expand...
Click to collapse
i downgraded changed the CSC, now samsung pay is on the watch but it wont open on my phone
I have a same problem too. "successfully launched" but nothing happend
R805FXXUFSK2
SM-R805FZSATMH
The downgrade is it the solution for me ? Which version ?
The downgrade is it the solution for me ? Which version ?
Click to expand...
Click to collapse
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
adfree said:
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
Click to expand...
Click to collapse
My CSC with the magic code is R805FOXA1FSK2
AP: R805FXXU1FSK2
CP: R805FXXU1FSK2
Hi guys, I'm from Brazil, and my FW is the R810XXU1DSL1.
I need to change the csc to ZTO... same problem, nothing happens.
Can some one help me?
What downgrade do I have to do?
You need to downgrade to any firmware older than DSL1 with NetOdin, as described elsewhere on this forum. Then changing the CSC will work.
Hi. I have the same problem. I'm now going to downgrade with the procedure in this topic.
I just have a doubt about which firmware I should use. This are my current info:
Watch: SM-R800
One UI: 1.5
Tizen: 4.0.0.7
Current FW: R800XXU1DSL1
Knox: 2.4.0
Bought on USA
Need to enable Samsung Pay in Brazil (I believe need to be changed to ZTO)
Can someone please which firmware I should try? First and second options?
Thanks.
adfree said:
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
Click to expand...
Click to collapse
On phones, usually downgrading can result in brick.
In the galaxy watch this does not happen can I downgrade to a previous version without fear of it happening?
any update yet guys
i am stuck with tyhe same problem.is there a way solution yet?
I just bought samsung active 2 but i noticed that version i have is old and samsung wear app tell me that i have last version software
Is that right or app have glitch?
Tizen 4.0.0.7
Software version R820xxu1bta1
Yes, this is the last version. It's have a 4.0.0.8, but only for few regions (I think). Now waiting the new one, the Tizen 5, it's starting to show in some regions, but for now just waiting...
Same problem. Bought it from Souq in Egypt, same software version. We should wait for the new Tizen OS update.
Hi all!
I have the 40mm LTE, (SM-R835F) with Tizen 4.0.0.7.
I want to change region to USA (from Sweden).
I have COMBINATION file for my watch, however i dont have Stock Firmware t get the AP, BL & CSC in NetOdin.
Can someone please help me with that part? Can i extract my own - then how?
Or should i use a Stock Rom with 4.0.0.8 - where do i find it?
Please help, im so close to changing the region - just need that last part.
I have only last fw for OXA region, but it based on Tizen 4.0.0.7. There's no yet newer fw for our model.
Hi guys.
After downgrading my Galaxy Watch to 4.0.0.4 and changing CSC to BTU so I can have Samsung Pay i cannot get it to update again to 4.0.0.7.
In app on phone when I go to software update it says it is up to date. Is there any way to force it to update or just wait until it updates on its own.
Nobody answered so I suppose I have to manually flash new firmware. Will my csc change to BTU stay whichever build of new 4.0.0.7 firmware I flash?
So it's solved. I upgraded back to 4.0.0.7 DTG1 and csc change stayed. Now I have samsung Pay and latest firmware.
Sent from my SM-G950F using Tapatalk
Hi
Why didnt you just stay on 4.0.0.7 and did the csc change there?
Mine was actually on the newest firmware but after i did the csc im now on 4.0.0.7 and i cant update to the newest. Can you update to ver 5?
CSC change over adb doesn't work on 4.0.0.7. So I had to downgrade and then upgrade again. There is no ver. 5 for R800.
ChmT said:
CSC change over adb doesn't work on 4.0.0.7. So I had to downgrade and then upgrade again. There is no ver. 5 for R800.
Click to expand...
Click to collapse
I read passed that, mine is a GWA2 so there is difference in firmware.
Sendt fra min SM-G980F med Tapatalk
Hi ChmT, thank you for your post.
Even I am facing the same problem.
I downgraded from 4.0.0.7(one ui 1.5) to 4.0.0.4, changed the csc successfully, enabled spay, but now not getting any updates. It says software is up to date.
Can you please help me with the requires files to update back to 4.0.0.7, or atleast links to those files?
Thank you.
Email: [email protected]
Spimer said:
Hi ChmT, thank you for your post.
Even I am facing the same problem.
I downgraded from 4.0.0.7(one ui 1.5) to 4.0.0.4, changed the csc successfully, enabled spay, but now not getting any updates. It says software is up to date.
Can you please help me with the requires files to update back to 4.0.0.7, or atleast links to those files?
Thank you.
Email: [email protected]
Click to expand...
Click to collapse
You can find it here : https://forum.xda-developers.com/smartwatch/galaxy-watch/sm-r800-csc-change-process-t4190167
Thank you @Mirhawk.
Its a great help.
Hi,
I got SGWA1 SM-R500 already with the following SW versions:
Tizen 4.0.0.7
One UI 1.5
SW: R500XXU1DSL1 / SM-R500NZDAXEZ
Knox: 2.4.0
SE for Tizen: 2.0.0
TIMA: 3.0.0
I searched a lot in this forum for the last 3 days but wasn't able to find all answers I'm searching for. So I would really appreciate if someone can give me a complete set of answers:
I want to use Samsung Pay, which is not available in my region - the Czech Republic. I understood that I need to change the region and probably it will be more complicated because of newest firmware version.
So:
What is the best region for the most up-to-date FW version with possibly all functionality. XAR-USA?
How do I do it? How do I change my region? Downgrade to ASAD version or trying to fiddle with "combination FW"?
Is there a way how to change the region but still receive future OTA or once I flash the firmware with Odin, there is no way back to OTA?
PLEASE, if possible try to describe all steps as detailed as possible.
Thanks a lot, this forum and people here are truly giving our devices superpowers!
I am interested too, how to change region on 4.0.0.7?
I have a little problem with my active 1 after the battery change there was an automatic update in which in the middle of the process the battery ran out and I entered the booting mode and did the recovery then my watch is out of firmware can someone help me please