Hello!
Just purchased a Samsung Galaxy Watch in Dubai. I live in Spain, so I would like to use Samsung Pay in that country. However, I can only configure Samsung Pay as United Arab Emirates. I have read that in order to make it work, I have to flash the specific firmware for the desired location (in this case, Spain) with Odin. I have found some tutorials on how to do that, but I cannot find the appropiate firmware for my device. Here is the info:
Model number: SM-R800
Tizen version: 4.0.0.1
Software version: R800XXU1BRK3
Has anyone done this before? Where can I find the appropiate firmware?
Thanks!
You don't have to flash firmware specific to the desired location, you have to update the csc (also resets the watch) to represent the location you want.
How to: https://forum.xda-developers.com/sm...r805f-csc-change-howto-esim-rsp-v2-x-t3848292
CSC list: https://forum.xda-developers.com/showthread.php?t=2546689
For me, I purchased the international version in the US and Samsung Pay did not work in Sweden, I changed the csc to NEE (nordics) following the guide above and I can now use Samsung Pay in Sweden.
Maybe this attached Video explain "something":
https://forum.xda-developers.com/showpost.php?p=78938105&postcount=726
It is possible with Watch Face to:
A
Verify... check active CSC/Sales Code
B.
Change CSC/Sales Code
Only problem at the moment...
Such Watch Face not in Store... """Security reason"""...
And...
Best Regards
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
I can't get the update to One UI 1.5 announced here, could I change my CSC to other country, update my device and change again to my original CSC?
Make that would disable Samsung Pay in my Galaxy Watch?
How could I check what regions have the latest version of One UI?
Hi for the France... 2020
jordi.badia said:
Thank adfree and siwan05 for your kind replies. I was able to change the CSC of my watch without problem. However, it turns out that my bank is not compatible with Pay on Watch (only with Samsung Pay app). Nevertheless, your advice worked perfectly.
Thanks!
Click to expand...
Click to collapse
How to change csc? I have galaxy watch 46mm SM- R800
I from Malaysia, my watch buy from Australia. Cannot using samsung Pay
Tizen 4.0.0.7
R800XXU1DSL1
Related
Hi all can somebody help installing Samsung Pay for India
I connected watch through sdb connect and when i run
command launch_app csc-manager.csc-pre-configuration it says successfully launched but nothing happens on my Galaxy Watch verion R800XXU1DSL1 tizen 4.0.0.7
Used SDBstarterKidv1
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
After downgrade and changing the region to enable Samsung pay.
If I again update to the latest firmware version will the Samsung pay still be there?
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
congusto said:
Yes, if you changed the CSC to get Samsung Pay, it will still be there after an update. As far as I know, the availability of Samsung Pay is CSC bound, not firmware bound.
Click to expand...
Click to collapse
i downgraded changed the CSC, now samsung pay is on the watch but it wont open on my phone
I have a same problem too. "successfully launched" but nothing happend
R805FXXUFSK2
SM-R805FZSATMH
The downgrade is it the solution for me ? Which version ?
The downgrade is it the solution for me ? Which version ?
Click to expand...
Click to collapse
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
adfree said:
Good question... according to your "incomplete" info... your active CSC could be TMH...
Then it seems OXA region.
Code:
R805FXXU1FSK2/R805F[B]OXA[/B]1FSK2/R805FXXU1FSK2
To be sure... simple enter magic Code:
Code:
*#1234#
And compare with my text...
Best Regards
Click to expand...
Click to collapse
My CSC with the magic code is R805FOXA1FSK2
AP: R805FXXU1FSK2
CP: R805FXXU1FSK2
Hi guys, I'm from Brazil, and my FW is the R810XXU1DSL1.
I need to change the csc to ZTO... same problem, nothing happens.
Can some one help me?
What downgrade do I have to do?
You need to downgrade to any firmware older than DSL1 with NetOdin, as described elsewhere on this forum. Then changing the CSC will work.
Hi. I have the same problem. I'm now going to downgrade with the procedure in this topic.
I just have a doubt about which firmware I should use. This are my current info:
Watch: SM-R800
One UI: 1.5
Tizen: 4.0.0.7
Current FW: R800XXU1DSL1
Knox: 2.4.0
Bought on USA
Need to enable Samsung Pay in Brazil (I believe need to be changed to ZTO)
Can someone please which firmware I should try? First and second options?
Thanks.
adfree said:
Downgrade...
https://forum.xda-developers.com/smartwatch/galaxy-watch/update-gw-r800-t3936370
Simple use older Firmware as DRK2... DSL1...
If you choose XAR for USA... then choose this Firmware:
Code:
R800XXU1[B][COLOR="Green"]CSE1[/COLOR][/B]
IMHO here SDB Commands still work...
In theory somehwere Thread or Post...
In newer Firmware like DSL1 Samsung increased Security...
Best Regards
Click to expand...
Click to collapse
On phones, usually downgrading can result in brick.
In the galaxy watch this does not happen can I downgrade to a previous version without fear of it happening?
any update yet guys
i am stuck with tyhe same problem.is there a way solution yet?
Hi guys,
First post, so please let me off if I haven't followed protocol properly. I have been looking at all the other threads and posts and I have come to the conclusion that this is possible, but I need some guidance:
Bought the watch second hand. Samsung Pay isn't available. Samsung Tech help believe the watch isn't from the UK. I also believe this to be true, as when it is reset, the first language to appear is German, before it syncs with the phone and changes to English.
So I would like to change the region from Germany to England to get Samsung Pay enabled.
I have downloaded NetOdin3
I am capable of connecting to the watch in boot mode through wireless.
I have downloaded the combination firmware and stock firmware from https://forum.xda-developers.com/sm.../samsung-galaxy-watch-mactive-2-gwa2-t3968437 where adfree posted the links.
This is where I am stuck. I am unsure if these are the right files for the UK, because that thread was to change it from Germany to "ser"
From what I've read I need to change some text in the combination firmware, but how do I do this, in NetOdin3? or some other program.
Secondly what do I need to change it from and to? I understand its to get the region from Germany to UK, but what is the region code for the UK?
I appreciate I am a total beginner and have probably just asked some real basic questions, however after reading the thread about the guy who flashed his 820 with 830 firmware and bricked it, I'm a little more worried about getting something wrong.
Cheers in advance
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Mithos11 said:
You have to change from DBT to BTU..BTU is UK CSC.
Best regards
Click to expand...
Click to collapse
OK, thanks.
So do I need to edit the files that @adfree linked in SDP?
or are those files ready to go and do I need to edit some files off the watch somehow?
Cheers
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Mithos11 said:
Hi,
you should read this post and follow the guide here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/changing-region-galaxy-active-2-t3983895
Click to expand...
Click to collapse
Thanks, the video on the last page made it much easier to understand the instructions, especially if you havent done this before. it was in russian, but its easy enough to follow.
all sorted now, samsung pay working. great stuff
Cheers
Pannatone
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
pannatone said:
Oh, quick question, after doing all this, will it be ok to install updates from samsung as they come, just as normal?
Click to expand...
Click to collapse
You will normally receive the update via OTA!
I'm looking for latest R820XXU1BTA1 stock firmware.
Change region Samsung Active 2 with Tizen 5.5.0.1 for SM-R835 (LTE version)
Hello, I have recently purchesed and Samsung Active 2 but as soon as I have paired I got an update and I have updated without thinkning what will that mean , but any way I am looking for files to change the region for Samsung Active 2 with Tizen 5.5.0.1 and SM-R835 .
Please help !!!!
Where can I find Combination & Firmware file for R835 Active 2 LTE I am looking to change from German to UK ? thanks
Bro
I have watch active 2 SM-R820
And i change the region INU to BTU
After i change the region i still not get Samsung health Monitor app
And also try some region like XAR,Koo
But I still unable to get Samsung health Monitor app what I do
please help
I just bought samsung active 2 but i noticed that version i have is old and samsung wear app tell me that i have last version software
Is that right or app have glitch?
Tizen 4.0.0.7
Software version R820xxu1bta1
Yes, this is the last version. It's have a 4.0.0.8, but only for few regions (I think). Now waiting the new one, the Tizen 5, it's starting to show in some regions, but for now just waiting...
Same problem. Bought it from Souq in Egypt, same software version. We should wait for the new Tizen OS update.
Hi all!
I have the 40mm LTE, (SM-R835F) with Tizen 4.0.0.7.
I want to change region to USA (from Sweden).
I have COMBINATION file for my watch, however i dont have Stock Firmware t get the AP, BL & CSC in NetOdin.
Can someone please help me with that part? Can i extract my own - then how?
Or should i use a Stock Rom with 4.0.0.8 - where do i find it?
Please help, im so close to changing the region - just need that last part.
I have only last fw for OXA region, but it based on Tizen 4.0.0.7. There's no yet newer fw for our model.
Hi, I'm searching for the R815FXXU1FSL3 odin update file (4.0.0.7, OXA) for the galaxy watch. I wanted to change the region to ITV (italy) and I already downgraded to 4.0.0.4 and managed to change it via the old sdb method. Unfortunately the LTE 42mm model was never sold in italy (only the 46mm LTE), so it won't auto update to the latest 4.0.0.7 firmware (the watch is originally from germany). So the only way i can update to 4.0.0.7 while retaining samsung pay is to have the said file.
If someone knows how to get it or has a link please let me know.
Could I perhaps flash the 46mm LTE firmware?
Has anyone ever received updates on this watch? Me in 2 years, I only had 1.
Hi guys!
I want to change the region to my active 2 LTE from US to Mexico so that I can use my Mexican carrier. I got it thinking it was globally unlocked but it looks like it's locked to the US.
I've seen some tutorials but they are for older versions (Tizen 4). This watch is on Tizen 5.5.0.1.
Can anyone please help me out with this?
Thank you very much
Looks like Mexico is OWO Region package... with CSC:
TCE
Step 1.
We need Combination Firmware...
Attached is slightly "modified"... only removed folder + 1 file...
Step 2.
We need OWO package of SM-R835F...
Best Regards
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
xjust said:
this works if the watch is already on 5.5.01 firmware? version FXXU1BT9
i need some help to not mess it up. since it only has one go through the wireless method.
thanks
Click to expand...
Click to collapse
I was never able to find the OWO package for my watch. So I never went through the process
I got BTU region on my watch. 5.5.0.2. Anybody can help change it ? thank you
Hi, does anyone have the Stock Firmware for Samsung watch active 2 R835U?