Hi,
I know there was almost the same thread, but it was almost 3 years ago.
I need firmware for CID: T-MOB009 MID: 2PS262000. I downloaded this one:
https://gsm-firmware.com/index.php?a=downloads&b=file&id=15194
But I'm still getting 12 RU_ZIP_ERROR. Of course I tried with other firmwares with 7 RU_CID_FAIL, so I believe the gsm-firmware is the correct for my CID...
The problem is that I am on s-on, right know I can't boot into system so I can't s-off with SunShine and change CID.
Please help!
Matwar said:
Hi,
I know there was almost the same thread, but it was almost 3 years ago.
I need firmware for CID: T-MOB009 MID: 2PS262000. I downloaded this one:
https://gsm-firmware.com/index.php?a=downloads&b=file&id=15194
But I'm still getting 12 RU_ZIP_ERROR. Of course I tried with other firmwares with 7 RU_CID_FAIL, so I believe the gsm-firmware is the correct for my CID...
The problem is that I am on s-on, right know I can't boot into system so I can't s-off with SunShine and change CID.
Please help!
Click to expand...
Click to collapse
You should check to see what software/firmware the device currently has/had on it, if possible.
Do this by checking O.S. in Download Mode, and/or preferably by entering the following command:
Code:
fastboot getvar all
and check the version-main in the output.
If your device is currently on a higher version then what you are trying to flash, it will fail due to being s-on.
So, you should first find out what the device is supposed to be running and then go from there as far as finding the proper RUU file version.
OK, so here is my software/firmware:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader)
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 3.18.118.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: T-MOB009
Is it possible to get RUU with 3.18.118.1 version. I think this is the reason...
Matwar said:
OK, so here is my software/firmware:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) current-slot:
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) version-main: 3.18.118.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: T-MOB009
Is it possible to get RUU with 3.18.118.1 version. I think this is the reason...
Click to expand...
Click to collapse
Yes, I have it on one of my older hard drives, just not sure which one and would take quite some time to locate.
However, I did also find it here, for a small fee: https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=48067
By the way, you should blank out your serial and IMEI numbers above...
santod040 said:
Yes, I have it on one of my older hard drives, just not sure which one and would take quite some time to locate.
However, I did also find it here, for a small fee: https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=48067
By the way, you should blank out your serial and IMEI numbers above...
Click to expand...
Click to collapse
Thank you for help! Could you search your older hard drives for that firmware? Right now I can't login for Firmware-GEM-Flash, I get "Dfp is required" notification... I was able to login 2 days ago, now I can't
Matwar said:
Thank you for help! Could you search your older hard drives for that firmware? Right now I can't login for Firmware-GEM-Flash, I get "Dfp is required" notification... I was able to login 2 days ago, now I can't
Click to expand...
Click to collapse
OK, I'm downloading the firmware, it was caused by adblock software - I had to disable it for a while. Hope the RUU will work
Matwar said:
OK, I'm downloading the firmware, it was caused by adblock software - I had to disable it for a while. Hope the RUU will work
Click to expand...
Click to collapse
OK, it worked perfectly! Thank you for help!
Related
I previously rooted my carrier ONE M9, changed the CID and installed the regular ROM.
Now I don't want root anymore and be able to install OTAs. I tried flashing the RUU and installing a backup. Both approached didn't work, and the device still says it's modified and can't install OTAs. The recovery shows a red icon. How can I allow my device to be able to receive OTAs again?
fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) imei: *******************
(bootloader) version-main: 3.35.401.12
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440792_97.00.51203G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
all:
finished. total time: 0.010s
Taken from the ReadMe thread:
Flippy498 said:
Be aware that there have been several reports that it's not possible to receive/install OTAs while using the SuperCID (11111111). So make sure you use a CID that corresponds to the OTA you want to install.
Click to expand...
Click to collapse
Please use the search function before you create a new thread.
hi there;
after soff and unlocked bootloader with latest viperrom, my phone has lost IMEI number and baseband version from about phone section.
but i can see imei from fastboot getvar all. ive allready tried diffrent firmwares also 2 different ruu s and android revulotion but unfortunately non of them has works.
i have allread super cid.
Can any one have any advice or suggest?
Thnx
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) serialno: HT53LSV07667
(bootloader) current-slot:
(bootloader) imei: 356113***********
(bootloader) version-main: 4.28.401.3
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U114401011_117.00.61117G_2_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: 11111111
Supercid is no longer valid so change it to a cid that is compatible with your firmware, ie htc_001, and go from there.
Beamed in by telepathy.
shivadow said:
Supercid is no longer valid so change it to a cid that is compatible with your firmware, ie htc_001, and go from there.
Beamed in by telepathy.
Click to expand...
Click to collapse
shivadow;
thnx for reply. after your suggest ive changed my cid to htc__001, write everything from begining but i am still on same condition any other thing you could suggest pls?
(bootloader) kernel: lk
(bootloader) product: htc_himauhl
(bootloader) version: 1.0
(bootloader) serialno: HT53LSV07667
(bootloader) current-slot:
(bootloader) imei: 3xxxxxxxxxxxxxxx
(bootloader) version-main: 4.28.401.3
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U114401011_117.00.61117G_2_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA10000
(bootloader) cid: HTC__001
Did you use the correct rom version for your firmware version?.
Beamed in by telepathy.
shivadow said:
Did you use the correct rom version for your firmware version?.
Beamed in by telepathy.
Click to expand...
Click to collapse
i am not so sure about it cuz phone come to me like that and i cant reach to guy who done that idiotic move.
ive allready tried 4.28.401.3, 1.32.401.17, 1.32.401.8 with viperone, revolution, and also stock os but non of them works
only the thing is i am so sure about this phone is serial number thats it
The wierd thing is that the imei can be seen outside of the operating system. That points me to an issue with the efs but if that was the case the imei would be incorrect (defaulted) in all cases..
May I ask, how many times did you flash the firmware when flashing back to stock? Two or three times should see that all info was written providing it was a full ruu flash!.
The only other thing I can think of is faulty software or the software has a disagreement with the imei..
Does it make calls etc or is the signal missing too?.
Beamed in by telepathy.
Thnx to blueberry60 , ive found out that the phones imei has been altered,
so thats completely illegal in our country i dont wantto mess around with this, and phone should be cdma.
so thank you so much for your effort.
regards.
Thanks for reporting back your finding!. From now on I will use your information if I come across another incident like yours!.
Thankyou very much!.
Beamed in by telepathy.
Been awhile since I have done anything related to rooting on my phone and I'm having some hardware problems so I need to put it stock but unsure what I need to look for and what RUU file I need.
Vysse said:
Been awhile since I have done anything related to rooting on my phone and I'm having some hardware problems so I need to put it stock but unsure what I need to look for and what RUU file I need.
Click to expand...
Click to collapse
Really its just a matter of finder the same version of the ruu that your device is running. As long as the rom version and your phone and the ruu match you should be good to go with the exe file
That's the thing though I can't remember the stock version or firmware version... also unsure where to find RUU's?
Vysse said:
That's the thing though I can't remember the stock version or firmware version... also unsure where to find RUU's?
Click to expand...
Click to collapse
Well first off a fastboot getvar all done in download mode would help to find out CID, MID and firmware version of your device. In addition: are you S-OFF or S-ON?
Sent from my htc_ocnuhl using XDA Labs
5m4r7ph0n36uru said:
Well first off a fastboot getvar all done in download mode would help to find out CID, MID and firmware version of your device. In addition: are you S-OFF or S-ON?
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
S-ON and I'm aware it'll say unlocked and I'm okay with that. Just hoping people don't notice.
Vysse said:
S-ON and I'm aware it'll say unlocked and I'm okay with that. Just hoping people don't notice.
Click to expand...
Click to collapse
Still you didn't provide the getvar all output which I need toprovide you the information which RUU you need. Please answer every question.
Sent from my htc_ocnuhl using XDA Labs
5m4r7ph0n36uru said:
Still you didn't provide the getvar all output which I need toprovide you the information which RUU you need. Please answer every question.
Sent from my htc_ocnuhl using XDA Labs
Click to expand...
Click to collapse
Sorry missed that part
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) version-main: 1.80.651.10
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: SPCS_001
Vysse said:
Sorry missed that part
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) version-main: 1.80.651.10
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: SPCS_001
Click to expand...
Click to collapse
Scroll down the page to your matching firmare (180.651.10). Download the executable, fire up your computer, and commence the restore process.
https://www.google.com/amp/www.theandroidsoul.com/download-htc-10-stock-firmware-ruu-and-ota/amp/
Vysse said:
Sorry missed that part
(bootloader) kernel: lk
(bootloader) product: htc_pmewhl
(bootloader) version: 1.0
(bootloader) version-main: 1.80.651.10
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS640000
(bootloader) cid: SPCS_001
Click to expand...
Click to collapse
Your firmware is outdated.
You can get the latest RUU directly from HTC.
Scroll down to the "Manual System Update Instructions" and read them. The RUU download is at the end of the instructions.
Hi Guys,
I've been trying to help a mate who's gotten himself into trouble with his HTC 10. Now i'm certainly no expert either, but figured that by doing some homework and asking in the right places (here!) we should hopefully be able to get out of trouble.
Full disclaimer - I have no idea what he did to the phone before i got it. I'd assume it was rooted and then he's tried to return it to factory.
The phone will not boot, and currently only has access to the bootloader/download mode. The bootloader is locked and S-ON is enabled.
Now here's where i think it get's tricky. I can't seem to find an RUU for the Telstra ROM it's running (841), and i can't enable debug mode to unlock the bootloader to flash any of the SneakyGhost .zip ROM's that I've found. It would appear we're stuck?
Here's the dump of the getvar all:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: FA65T********
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 3575100********
(bootloader) version-main: 3.18.841.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: TELST001
Is there any way to get around this? Could I change the cid to a north american one and flash a stock HTC RUU?
Any help or guidance on where to go from here would be great.
Cheers.
demon1300 said:
Hi Guys,
I've been trying to help a mate who's gotten himself into trouble with his HTC 10. Now i'm certainly no expert either, but figured that by doing some homework and asking in the right places (here!) we should hopefully be able to get out of trouble.
Full disclaimer - I have no idea what he did to the phone before i got it. I'd assume it was rooted and then he's tried to return it to factory.
The phone will not boot, and currently only has access to the bootloader/download mode. The bootloader is locked and S-ON is enabled.
Now here's where i think it get's tricky. I can't seem to find an RUU for the Telstra ROM it's running (841), and i can't enable debug mode to unlock the bootloader to flash any of the SneakyGhost .zip ROM's that I've found. It would appear we're stuck?
Here's the dump of the getvar all:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: FA65T********
(bootloader) slot-count: 0
(bootloader) current-slot:
(bootloader) imei: 3575100********
(bootloader) version-main: 3.18.841.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: TELST001
Is there any way to get around this? Could I change the cid to a north american one and flash a stock HTC RUU?
Any help or guidance on where to go from here would be great.
Cheers.
Click to expand...
Click to collapse
First of all sneakyghost doesn't have any ROMS online, only firmware. Firmwares and ROMS are 2 very DIFFERENT things. Firmware is only the bootloader, recovery and such and a rom is the running OS on the phone, so please do not mix those up.
Second if you can't find any ruu with that number, any firmware with that number, any stock backup with that number and the phone isnt running any software it will indeed be a challenge.
S-off is a way (and also 100% needed) to change the cid and change region. Otherwise you will be stuck with telstra.
I will have a quick peek around to see if there is any software out there.
Edit :
Okay i found a RUU but it's a payed website, i know it's legit as i have seen users here used it and succeeded.
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=48060
That file is what you need to get the device up and running in 1 sitting.
Thanks for the response. Clears a few things up for me. If I was to pay tglo get that file, could you outline the steps I should follow?
demon1300 said:
Thanks for the response. Clears a few things up for me. If I was to pay tglo get that file, could you outline the steps I should follow?
Click to expand...
Click to collapse
Rename the file to :
2PS6IMG.zip
Place the file on the SD card and enter download mode, follow instructions to flash.
Mr Hofs said:
Rename the file to :
2PS6IMG.zip
Place the file on the SD card and enter download mode, follow instructions to flash.
Click to expand...
Click to collapse
Awesome! Worked a charm! Thanks again for all your help.
Hi guys,
I got a HTC 10 for free because it's currently soft bricked (I can access download, RUU, bootloader, recovery but will not be able to flash or boot unsigned.)
TWRP is somehow installed, however it is S-ON and **Relocked** - System Status Modified
I am looking for RUU for Telstra_WWE_2.48.841.31 or later,
I find it unreasonable to pay for it though, as gem-flash is offering.
fastboot getvar all:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) imei: **************
(bootloader) version-main: 1.95.841.3
(bootloader) boot-mode: RUU
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: TELST001
finished. total time: 0.014s
Any luck?
hwill182 said:
Any luck?
Click to expand...
Click to collapse
Not yet
apcaf said:
Not yet
Click to expand...
Click to collapse
I managed to fix mine, but unfortunately I've since reinstalled windows and lost the rom. Sorry, but you should be able to find one online for free that works