Related
Hello,
Two months ago I upgraded my android version to 5.0.1, since then wifi problems start to appear.
There are two problems:
1) When the phone is sleeping, the wifi disconnect. once I wake the phone, even if it still locked, the wifi turns on again after 1 second. (I checked the advanced settings and "keep wifi on during sleep" is on "always").
2) Once I go from the wifi zone and come back after a while, I can't connect to the wifi. it just keep scanning, and when I tap on it to see available networks it just shows white page (switching wifi on and off doing nothing).
This problem can be solve by turning airplane mode on and off, but it only helps for one time - once I go away and come back to the same wifi zone I need to do it again.
*I tried factory reset, doesn't help.
*I flashed another rom, from HD revolution to ViperOne, and now my android version is 5.0.2, doesn't help.
*This problem happens in every router, not only in a specific one.
Maybe going back to the stock recovery will solve the problem, but I don't think so.
Thanks in advance
Avishay28 said:
Two months ago I upgraded my android version to 5.0.1, since then wifi problems start to appear.
*I flashed another rom, from HD revolution to ViperOne, and now my android version is 5.0.2, doesn't help.
Click to expand...
Click to collapse
Your android version is software version but not firmware version. You can't update your firmware by flashing ROMs.
Post your fastboot getvar all (delete serial & imei no.) then maybe that getvar info will point to your actual problem.
ckpv5 said:
Your android version is software version but not firmware version. You can't update your firmware by flashing ROMs.
Post your fastboot getvar all (delete serial & imei no.) then maybe that getvar info will point to your actual problem.
Click to expand...
Click to collapse
hi,
this is my info
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.21.21331147A1.19_2G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: BS_US001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: df77f8b7
hbootpreupdate: 11
gencheckpt: 0
Is it help?
Your radio low version suggest that you have a 3.x firmware installed, not 4.x which is required for 5.0.x android version.
Here is the latest RUU for your device version : http://dl3.htc.com.s3.amazonaws.com...G_20.68.4196.01_F_release_446501_signed_2.exe
Relock bootloader & run RUU.
Later you can re-unlock bootloader and install any custom ROM that you like
ckpv5 said:
Your radio low version suggest that you have a 3.x firmware installed, not 4.x which is required for 5.0.x android version.
Here is the latest RUU for your device version : http://dl3.htc.com.s3.amazonaws.com...G_20.68.4196.01_F_release_446501_signed_2.exe
Relock bootloader & run RUU.
Later you can re-unlock bootloader and install any custom ROM that you like
Click to expand...
Click to collapse
I'm pretty new to all this, so I'll be glad to have some explanation.
What's "ruu"? And how do I relock the bootloader?
What's the difference between Android version and firmware version?
I need to wipe something before I run ruu?
You think this is what cause the Wi-Fi problems?
Thank you!
Here is a good read for you : http://forum.xda-developers.com/showthread.php?p=52484527
relock bootloader - run command fastboot oem lock (after you put your device in bootloader/fastboot mode and connect to PC)
No need to wipe anything - the RUU will remove all and replace everything with the latest images - data, system, firmware and ROM
Your wifi problem as mentioned earlier because your firmware is old and has old radio baseband and not meet the minimum requirement for Android 5.0..x
An important note : after you done the RUU thing, to install custom ROM or to root, you need to install latest TWRP 2.8.7.0
Don't use the old TWRP recovery that you have .. as seen in your getvar all, there are a few missing info because of outdated TWRP
ckpv5 said:
Here is a good read for you : http://forum.xda-developers.com/showthread.php?p=52484527
relock bootloader - run command fastboot oem lock (after you put your device in bootloader/fastboot mode and connect to PC)
No need to wipe anything - the RUU will remove all and replace everything with the latest images - data, system, firmware and ROM
Your wifi problem as mentioned earlier because your firmware is old and has old radio baseband and not meet the minimum requirement for Android 5.0..x
An important note : after you done the RUU thing, to install custom ROM or to root, you need to install latest TWRP 2.8.7.0
Don't use the old TWRP recovery that you have .. as seen in your getvar all, there are a few missing info because of outdated TWRP
Click to expand...
Click to collapse
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
sorry for all the questions, I don't want to damage the device
Avishay28 said:
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
sorry for all the questions, I don't want to damage the device
Click to expand...
Click to collapse
It's harder to help when you ask all non-related stuff. I don't mention anything about S-Off because it is not necessary.
I know your device is S-on, that's why I said relock bootloader
Only two steps :
relock bootloader - run comman fastboot oem lock
run RUU - right click the RUU and select run as administrator on windows context menu
What you need :
USB2.0 on PC
Latest HTC USB driver installed - if not sure, download HTC Sync Manager - http://www.htc.com/us/support/software/htc-sync-manager.aspx
install it as it will install the latest driver then uninstall the HTC Sync Manager but leave the drivers.
Avishay28 said:
Ok the status changed to "relocked" instead of "unlocked", now just run the ruu? is there any command or something?
edit: I need to gain s-off first?
Click to expand...
Click to collapse
RELOCKED is fine to run the RUU (as is LOCKED). UNLOCKED is the only status for that particular flag that prevents RUU.
You don't need s-off to RUU.
I relock the bootloader and run the ruu and now the wifi is working fine!
Thank you very much for your help!
same wifi issue
Hi
I got the same wifi issue and I try exactly the same fix as #Avishay28 but they didn't work.
And now I know why thanks to you #redpoint73.
Would you please suggest what kind of RUU should i install to have my phone back fully working?
Those are my info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Read post #8 for steps & what you need then install
4.16.401.10 RUU then do OTA to 4.16.401.13
http://androidruu.com/?developer=M8
I seem to have issues still even though I'm past version 4:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.12.20.1211
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.17.605.9
(bootloader) version-misc: PVT SHIP S-ON
anyone else have issues on this version?
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU (Hboot PreUpdate)
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
im having same issue with the wifi
eternity4ever said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.21331147A1.19_2G
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: 11111111
(bootloader) security: off
im having same issue with the wifi
Click to expand...
Click to collapse
First - edit your post to remove serial & imei no.
Your baseband version suggest that you have a 3.xx.xxxx.x firmware installed.
You need a 4.xx.xxx.x firmware to have a working wifi when install a lollipop ROM.
What device that you have ? 0P6B16000 can be a Canadian device and some South American device. Update your firmware to the one meant for your device version.
My is Canadian device. I couldn't find a ruu version of device
eternity4ever said:
My is Canadian device. I couldn't find a ruu version of device
Click to expand...
Click to collapse
There is no RUU available for Canadian device. At least tell what it is .. Rogers, Bell, Telus or ??? You can try to find a nandroid backup and stock recovery, restore then do OTA to update to the latest.
Or .. as your device is S-Off, you can change it WWE device i.e change MID to EU MID then install EU RUU.
ckpv5 said:
There is no RUU available for Canadian device. At least tell what it is .. Rogers, Bell, Telus or ??? You can try to find a nandroid backup and stock recovery, restore then do OTA to update to the latest.
Or .. as your device is S-Off, you can change it WWE device i.e change MID to EU MID then install EU RUU.
Click to expand...
Click to collapse
Rogers
As I mentioned above try find a backup for device.
You need 3.34.631.4 and its stock recovery.
I already switch off my PC and in bed. Not sure whether I have those files in my collection.
I'll check tomorrow when I have time but try to find it first. Should be available.
ckpv5 said:
As I mentioned above try find a backup for device.
You need 3.34.631.4 and its stock recovery.
I already switch off my PC and in bed. Not sure whether I have those files in my collection.
I'll check tomorrow when I have time but try to find it first. Should be available.
Click to expand...
Click to collapse
can you post the files please ?thank you
Hallo,
I have a HTC One M8 (bootloader unlocked, twrp recovery, rooted, S-On, android ver 6.0, HTC sence ver 7). Unfortunately, it stops from almost a week recognizing my Sim-Card.
When I check the Baseband and IMEI numbers under "Phone Identity", it says "Unknown".
But, If I reboot into Fastboot, and use the command: "fastboot getvar all", it shows that I have an imei number. ?!!
My question, what is wrong with the device. How I can fix the IMEI number. Do I need to get S-Off, and if yes, how i can do that.
Thanks.
have you tried to flash RUU if it's available for your device variant ?
if you didn't then post the result of fastboot getvar all ( after removing serialno and imei )
ahmed.ismael said:
have you tried to flash RUU if it's available for your device variant ?
if you didn't then post the result of fastboot getvar all ( after removing serialno and imei )
Click to expand...
Click to collapse
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
The result of "getvar all" is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
moh19814 said:
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
The result of "getvar all" is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.401.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
follow this post instruction ( all of it and don't miss a step )
https://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
this will help if your problem is software related
if it doesn't then most defiantly it's hardware related ( let's hope it's a software )
BTW you don't need s-off
moh19814 said:
I could not find any RUU.exe for my device. But I flashed HTC_M8_twrp_DE_ota_6.12.401.4 through TWRP recovery, which did not solve the problem. I still have Baseband and IMEI as unknown.
Click to expand...
Click to collapse
There is no reason to think that a TWRP backup would fix this. TWRP backup is just he ROM (system) partition and doesn't include radio or other firmware partitions.
RUU is what you need, as it will re-image the device with all factory partitions, including radio baseband, and other firmware.
Hi there,
I have the exact same problem with my htc one m8. My "fasboot getvar all" is identical with the one posted here, only these are different:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Hope someone can help me. I was unable to find RUU for this version. Thanks in advance!
melves said:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Click to expand...
Click to collapse
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Do yourself (and us) a favor and just post all the getvar data (this time, and when asking for help in the future). It's easy to copy and paste; and probably much easier/faster than trying to explain what is different, and what is not - plus remove all doubt like the one above. If you don't know how to copy and paste in control prompt, right mouse click on the window, select "Mark" then highlight what you want to copy, then press Ctrl+C. Then in a post, just right mouse click and select "Paste".
As always, remove IMEI and serial number before posting.
redpoint73 said:
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Do yourself (and us) a favor and just post all the getvar data (this time, and when asking for help in the future). It's easy to copy and paste; and probably much easier/faster than trying to explain what is different, and what is not - plus remove all doubt like the one above. If you don't know how to copy and paste in control prompt, right mouse click on the window, select "Mark" then highlight what you want to copy, then press Ctrl+C. Then in a post, just right mouse click and select "Paste".
As always, remove IMEI and serial number before posting.
Click to expand...
Click to collapse
Thanks for the respond redpoint73,
I'm sorry about that, you're right that posting all the data is the best thing to do if I want to get help. Well, there it is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.111.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: T-MOB101
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 76df2b54
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This M8 of mine is bought from german operator named "Telekom" and it hasn't been network locked. I've unlocked the bootloader and installed TWRP for the only reason that my original software crashed and I wasn't able to find official one for that model. I've found however a nandroid backup for my version and restored it through TWRP and all went fine for a month until my sim suddenly stopped being recognized (few different sims from friends of mine also were tested with the same result). *#06# gives me blank space, but on "fastboot getvar all" IMEI comes up. If any more info needed please tell.
redpoint73 said:
Are you sure? Because it would be really unusual to have a different CID and main version, but the same radio baseband number. I suspect the baseband number is actually different.
Click to expand...
Click to collapse
Radio baseband mostly same for most M8 except the radio config data is different for each CID
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
melves said:
Hi there,
I have the exact same problem with my htc one m8. My "fasboot getvar all" is identical with the one posted here, only these are different:
version-main: 6.12.111.4
cidnum: T-MOB101
......everything else is completely the same.
Hope someone can help me. I was unable to find RUU for this version. Thanks in advance!
Click to expand...
Click to collapse
You can try flashing the htc signed firmware for 6.12.111.4
Most of the time this will fix the problem.
You can get the firmware in my backup thread linked in my signature on post #5
ckpv5 said:
You can try flashing the htc signed firmware for 6.12.111.4
Most of the time this will fix the problem.
You can get the firmware in my backup thread linked in my signature on post #5
Click to expand...
Click to collapse
Thank you very very much, it worked like a charm. After flashing the firmware from your post my sim is recognized again.
I'm glad there are people like you, thanks again!
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-cpld: None
version-microp: None
version-main: 4.34.401.1
version-misc: PVT SHIP S-ON
serialno: HT537WM02945
imei: 358705060111558
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 260ae94e
hbootpreupdate: 11
moka77 said:
version-main: 4.34.401.1
product: m8_ul
modelid: 0P6B67000
cidnum: HTC__J15
Click to expand...
Click to collapse
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
redpoint73 said:
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
Click to expand...
Click to collapse
my htc decrypt storage
---------- Post added at 08:26 AM ---------- Previous post was at 08:23 AM ----------
redpoint73 said:
So what it the problem? The subject of the post is "no baseband, IMEI unknown" which is clearly not the problem in your case.
You also need to give some background. Was the phone modified in any way? The main version (4.34.401.1) looks weird, as it isn't expected to go with your product ID (m8_ul), MID, CID, etc.
Click to expand...
Click to collapse
i need Help Me For Flash HTC M8
MODEL: M8_UL
IMEI: 35870
PLATFORM: hTCBmsm8974
CID: HTC__J15
MID: 0P6B67000
BOOT LOADER: 3.19.0.0000 / 260ae94e
VERSION: 0.5
FIRMWARE: 4.34.401.1 / 1.29.21331147A1.14G / PVT SHIP S-ON
SECURITY FLAG: ON
---------- Post added at 08:33 AM ---------- Previous post was at 08:26 AM ----------
moka77 said:
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-cpld: None
version-microp: None
version-main: 4.34.401.1
version-misc: PVT SHIP S-ON
serialno: HT537WM02945
imei: 358705060111558
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 260ae94e
hbootpreupdate: 11
Click to expand...
Click to collapse
i need Help Me For Flash HTC M8
MODEL: M8_UL
IMEI: 35870
PLATFORM: hTCBmsm8974
CID: HTC__J15
MID: 0P6B67000
BOOT LOADER: 3.19.0.0000 / 260ae94e
VERSION: 0.5
FIRMWARE: 4.34.401.1 / 1.29.21331147A1.14G / PVT SHIP S-ON
SECURITY FLAG: ON
moka77 said:
i need Help Me For Flash HTC M8
Click to expand...
Click to collapse
Flash what? You want the stock ROM or RUU? Or you want to flash a custom ROM?
I'm guessing that English is maybe not your native language? Regardless, you are going to need to try harder to explain what you want; and what your problem is. It seems completely unrelated to the thread topic, so it's very confusing trying to figure out what your issue is, and what you are trying to do.
We also need to understand what you have tried to do to the phone so far. Please describe, step by step, in as much detail as possible, with specific file names, sources you used, etc.
You've basically only posted 2 sentences, along with cut and paste some phone info. And while the phone info is useful to see the current state of the device, the 2 sentences you wrote, don't do much to tell us what is going on, and what you are trying to do.
---------- Post added at 09:02 AM ---------- Previous post was at 08:59 AM ----------
moka77 said:
version-bootloader: 3.19.0.0000
version-baseband: 1.29.21331147A1.14G
version-main: 4.34.401.1
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B67000
cidnum: HTC__J15
Click to expand...
Click to collapse
@ckpv5, if you have a chance, can you please take a look at this? I don't recognize that firmware number as being associated with the CID/MID. But I know you have a much better handle on the firmware numbers, CIDs, etc. So it may be some variant I'm not remembering.
redpoint73 said:
@ckpv5, if you have a chance, can you please take a look at this? I don't recognize that firmware number as being associated with the CID/MID. But I know you have a much better handle on the firmware numbers, CIDs, etc. So it may be some variant I'm not remembering.
Click to expand...
Click to collapse
That firmware indicates the device is M8_UHL for Middle East which run on 2.5Ghz as the Asia version. Normal EU is 2.3Ghz.
He needs the lollipop which I don't have in my backup thread. Only have 6.21.401.1 - backup, stock recovery & stock firmware.
We don't know if the device LOCKED or UNLOCKED. If unlocked then can try to restore 6.21.401.1 backup then flash the firmware. As his problem is "htc decrypt storage" I'm afraid it is emmc problem. If it is unlocked, then can format data (not wipe) in twrp to fix it.
Edit : Guess he's a lucky guy. There is RUU available for free
@moka77
Download 0P6BIMG_M8_UHL_L50_SENSE60_MR_HTC_Europe_4.34.401.1_Radio_1.29.21331147A1.14G_20.75.4196.01_F__signed.zip
https://easy-firmware.com/index.php?a=browse&b=category&id=1159
ckpv5 said:
That firmware indicates the device is M8_UHL for Middle East which run on 2.5Ghz as the Asia version. Normal EU is 2.3Ghz.
Click to expand...
Click to collapse
I figured that might be the case (one of the less common versions, like Middle East) but can never remember that firmware number. CID can apparently have 2 MIDs (0P6B10000 and 0P6B67000), so that threw me off, as well.
Why wouldn't the product ID say m8_uhl in getvar?
Thanks for replying and helping out, as always!
redpoint73 said:
I figured that might be the case (one of the less common versions, like Middle East) but can never remember that firmware number. CID can apparently have 2 MIDs (0P6B10000 and 0P6B67000), so that threw me off, as well.
Why wouldn't the product ID say m8_uhl in getvar?
Thanks for replying and helping out, as always!
Click to expand...
Click to collapse
0P6B67000 has only 2 CID HTC__001 & HTC__J15
No idea why ... some M8_UHL devices are HKG, India, Australia & Some China version but getvar show only M8_UL
Just for info :
M8_UL - WCDMA / GSM / FDD-LTE
M8_UHL - GSM / WCDMA / FDD-LTE / TDD-LTE
ckpv5 said:
0P6B67000 has only 2 CID HTC__001 & HTC__J15
Click to expand...
Click to collapse
Yeah, I see that from your TWRP backup thread (which I reference frequently). What confused me is that CID HTC__J15 can be MID 0P6B10000 or 0P6B67000.
Thanks again for clarifying.
Hi @redpoint73 @ckpv5 i have the same problem like few members above but might be a little different, my device stop detecting sim and other systems started to crash and stop working, It all started after i did the offical OTA software update for 6.0 but it dident install properly with giving the error at the end and reverted back to the old version.
I have unlocked the device to install a custom rom andriod 6.0 to fix this problem but it mad e it worse the rom booted but sim is still not recoginzed and nor the wifi is working that i think is due to the firmware being old.
After reading and serching i found your thread and this represented all the problems that i was facing so i fallowed your thread. i relocked my bootloader and tried to install the RUU 6.0 that you provided to the but that also failed saying varifing few ( version/ serial i do not remember didn't take a screenshot ) failed.
now i have thought of installing the RUU from the other meathord you mentioned in the end of that thread using the AruwizardMM.zip.
do i have to re unlock the bootloader or should i keep the bootloader Relocked status.
Version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
version-cpld: None
version-microp:None
version-main: 4.16.401.13
version-misc: PVT Ship S-ON
serialno: **************
imei:**********2805
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsmo8974
modelid: 0P6B10000
cidnum: HTC_001
battery-status: good
battery-voltage: 0mV
partition-layoutL Generic
security: on
build-mode: SHIP
boot-mode:FASTBOOT
commitno-bootloader: f063fb42
hbootpreupdate: 11
gencheckpt: 0
ViperRJB said:
After reading and serching i found your thread and this represented all the problems that i was facing so i fallowed your thread. i relocked my bootloader and tried to install the RUU 6.0 that you provided to the but that also failed saying varifing few ( version/ serial i do not remember didn't take a screenshot ) failed.
Click to expand...
Click to collapse
Which RUU? Two different RUU have been provided in this thread. You should reference the version number, file name, or post you got it from; otherwise we have no idea which RUU file you tried.
You want the one linked in Post#4: https://forum.xda-developers.com/showpost.php?p=70838762&postcount=4
If you tried the RUU from Post #15, it won't work for your. It's intended for the Middle Eastern version, and since your CID and MID do not match what the RUU is looking for, it will fail (as intended by HTC).
RUU will fail for wrong version. It doesn't check the serial number, and will not fail from that. On that point, you should delete your serial number from your post. It isn't needed to solve your issue, and it is personal info, which should not be posted online.
ViperRJB said:
do i have to re unlock the bootloader or should i keep the bootloader Relocked status.
Click to expand...
Click to collapse
You do not unlock the bootloader to flash RUU. In fact, an unlocked bootloader will cause RUU to fail (not flash). RUU requires a locked or relocked bootloader when s-on.
i have htc one m8 using cm nouget latest but suddenly phone got off because of low battery and after that i am not able to get any signal and my phone is not showing any IMEI and baseband is unknown.
i have tried to install others roms but not succeeded.
i have tried to restore to stock from twrp nandroid backups from below thread but my phone is still showing baseband unknown and not showing any IMEI
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
my bootloader is unlocked and s-on.
i am trying to find ruu file.
if anyone can help to find ruu file or can tell me how to get rid of this Imei problem(not getting any signal) that would be great
my htc one m8 get var all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT4xxxxxx639
(bootloader) imei: 35244xxxxxxxx19
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
please help me to get my phone usable .
i can use stock rom or any other rom.
here is the RUU,zip
https://www.androidfilehost.com/?fid=24591000424941691
and here is how to flash do all the steps ( use the RUU from the link above )
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6
Htc one m8 whl
I have been facing a trouble with HTC ONE m8 WHL
when the device came to me wireless is working but there is no traffic
I tried to flash the phone but the problem was still but in addition there is no baseband
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0119
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.654.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:--------
(bootloader) imei:--------
(bootloader) imei2: Not Support
(bootloader) meid: -------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6400afe2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This is the device information
Anyone can help me please
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
hands free activation was required and i passed it throw up the TWRP recovery
snow_man026 said:
I have been facing a trouble with HTC ONE m8 WHL
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
Click to expand...
Click to collapse
You shouldn't be trying "a lot" of RUUs. You should be trying only the correct RUUs for the Sprint M8. Flashing RUUs for other versions is dangerous, and can lead to permanent damage to the Sprint version M8.
https://forum.xda-developers.com/showthread.php?t=2729173
Did you buy this phone? And you received it with cell data not working? If so, you should return it to the seller (if possible) rather then messing around with it (possibly breaking it worse, and voiding any possibility of return to the seller).
Also, you should delete IMEI, serial number, and MEID from your post. These are unique to the device, and should never be posted online.
All the RUU files that i had tried for the same model ONE M8 WHL
No I didn't buy the phone but it's my job to make a software for the phones
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
But my problem now there is "no baseband"
snow_man026 said:
All the RUU files that i had tried for the same model ONE M8 WHL
Click to expand...
Click to collapse
This still doesn't tell me which RUUs you tried. There are 14 RUUs on the thread I linked. Which ones exactly did you try, and in what order? Did you use the exe or zip method (and if the latter, was it by htc_fastboot, or SD card method)? Did the RUU(s) install completely and successfully, or were there error messages? If there were error messages, what did they say exactly?
Basically, your posts are short on details. You should be specific and detailed as possible, when asking for help.
snow_man026 said:
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
Click to expand...
Click to collapse
Understanding that English may not be your native language. But I don't know what that means "there is no traffic". Can you try to explain another way (again, more details may help).
snow_man026 said:
But my problem now there is "no baseband"
Click to expand...
Click to collapse
Where are you seeing "no baseband". In the getvar you posted, it says baseband number 1.09.20.0119
You also did not delete the personal details (serial number, IMEI and MEID) from the getvar output, as I previously advised.
I'm so sorry for being late
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
This is my phone information while the phone is ON by XTC2CLIP
Reading information...
Using ADB mode...
CID list: [SPCS_004]
Main CID: [SPCS_004]
Model ID (MID): [0P6B70000]
Project: [M8_WHL_M60_SENSE70_SPCS_MR]
System version: [6.20.654.3]
Chipset: [msm8974]
Hardware: [qcom]
Serial no: [FA45PSF03010]
Release: [HTC/htc_m8whl/htc_m8whl:6.0/MRA58K/buildteam01071632:user/release-keys]
Bluetooth chipset: [Qualcomm WCN3680]
Buildline: [M8WHL_Sprint_WWE_M60_CRC_Sense70_Stable_MR2_harman]
Sense version: [7.0]
SKU: [Sprint WWE Harman]
Signed: [release-keys]
Android version: [6.0]
Android patch [2016-01-01]
Disk enecryption: [unencrypted]
Device: [htc_m8whl]
Read information completed.
and this the information while the device in the fastboot mode :
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.654.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ---------
(bootloader) imei: -----------
(bootloader) imei2: Not Support
(bootloader) meid: -----------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
thank you very much
snow_man026 said:
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
Click to expand...
Click to collapse
Is that the only RUU you tried? Before you said you tried "a lot of RUU flash files kitkat or lolipop " and when asked which RUUs you tried, you list only one. So one of those statements is incorrect or incomplete.
Hard to diagnose the issue (or may give incorrect advice) is we don't know exactly, step-by-step, what you did, and the state of the device at each step.
One important example of this: Are you absolutely sure you only flashed Sprint RUUs? It's a known problem, that if you tried to flash a non-Sprint RUU or radio baseband, that it will result in a radio brick (possibly permanent, but usually can be fixed).
snow_man026 said:
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
Click to expand...
Click to collapse
I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I asked before, what you meant by this. You still haven't explained (only given the current state).
Again, it's hard to properly troubleshoot the issue, when it's pretty clear we've only been given a portion of the info.
Thanks for keeping in touch
These are the RUU files that I had tried before
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WW
E_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.25.654.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426233_signed_2
According to XTC2CLIP support all of M8_WHL flash files are Sprint or sprint and harman
then I tried this file
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6 .20.654.3
I'm so sorry maybe I didn't explain my problem exactly when I posted it
"" I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I meant there was no traffic when you connected to wifi there was no data transfer and this problem was solved by flashing the latest file
Now my problem is there are no imei and baseband in the normal mode but in the fast mode are exist
Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.
redpoint73 said:
Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.
Click to expand...
Click to collapse
I know how to flash firmware thanks for help
I will inform you with the result
thanks a lot
I bought a sprint m8. M8_whl unlocked and s-off. I flashed different RUUs, ROMs etc. Phone works normally but cant find SIM card. It always shows Imei unknown baseband unknown PRL unknown. I live in Turkey. How can i solve my problem?
This is getvar all
bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.651.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxx
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: xxxxxxxx
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
You have to flash the firmware first prior installing any rom.
@degerli43
remove seialno and meid from OP
try to flash the stock RUU from HTC website here
http://www.htc.com/us/support/htc-one-m8-sprint/news/
a direct link to the RUU
http://dl3.htc.com/application/RUU_...1.3.exe?_ga=1.193310766.2098465900.1482652286
ahmed.ismael said:
@degerli43
remove seialno and meid from OP
try to flash the stock RUU from HTC website here
http://www.htc.com/us/support/htc-one-m8-sprint/news/
a direct link to the RUU
http://dl3.htc.com/application/RUU_...1.3.exe?_ga=1.193310766.2098465900.1482652286
Click to expand...
Click to collapse
thanks for warning me. i tried RUU's but it didnt help me. I am now trying with badboyz rom with flashed correct firmware. hope it helps.
It didnt work again. Please help me.
degerli43 said:
It didnt work again. Please help me.
Click to expand...
Click to collapse
what firmware version you have flashed ??
sprint device is a sensitive device flashing the wrong firmware maybe result in a permanent radio brick ( i hope that's not the case )
ahmed.ismael said:
what firmware version you have flashed ??
sprint device is a sensitive device flashing the wrong firmware maybe result in a permanent radio brick ( i hope that's not the case )
Click to expand...
Click to collapse
I flashed 6.20.651.3 fw. Is it wrong?
degerli43 said:
I flashed 6.20.651.3 fw. Is it wrong?
Click to expand...
Click to collapse
It's the correct firmware
Your issue might be the network itself,as there is some users have the same problem ( using sprint device on gsm network and the imei is unknown )
Try with an older RUU like kitkat and see how it goes
Sent from my HTC M8 using XDA Labs
Hi,
I know there was almost the same thread, but it was almost 3 years ago.
I need firmware for CID: T-MOB009 MID: 2PS262000. I downloaded this one:
https://gsm-firmware.com/index.php?a=downloads&b=file&id=15194
But I'm still getting 12 RU_ZIP_ERROR. Of course I tried with other firmwares with 7 RU_CID_FAIL, so I believe the gsm-firmware is the correct for my CID...
The problem is that I am on s-on, right know I can't boot into system so I can't s-off with SunShine and change CID.
Please help!
Matwar said:
Hi,
I know there was almost the same thread, but it was almost 3 years ago.
I need firmware for CID: T-MOB009 MID: 2PS262000. I downloaded this one:
https://gsm-firmware.com/index.php?a=downloads&b=file&id=15194
But I'm still getting 12 RU_ZIP_ERROR. Of course I tried with other firmwares with 7 RU_CID_FAIL, so I believe the gsm-firmware is the correct for my CID...
The problem is that I am on s-on, right know I can't boot into system so I can't s-off with SunShine and change CID.
Please help!
Click to expand...
Click to collapse
You should check to see what software/firmware the device currently has/had on it, if possible.
Do this by checking O.S. in Download Mode, and/or preferably by entering the following command:
Code:
fastboot getvar all
and check the version-main in the output.
If your device is currently on a higher version then what you are trying to flash, it will fail due to being s-on.
So, you should first find out what the device is supposed to be running and then go from there as far as finding the proper RUU file version.
OK, so here is my software/firmware:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader)
(bootloader) current-slot:
(bootloader) imei:
(bootloader) version-main: 3.18.118.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: T-MOB009
Is it possible to get RUU with 3.18.118.1 version. I think this is the reason...
Matwar said:
OK, so here is my software/firmware:
Code:
(bootloader) kernel: lk
(bootloader) product: htc_pmeuhl
(bootloader) version: 1.0
(bootloader) max-download-size: 1578400000
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) current-slot:
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) version-main: 3.18.118.1
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 2PS620000
(bootloader) cid: T-MOB009
Is it possible to get RUU with 3.18.118.1 version. I think this is the reason...
Click to expand...
Click to collapse
Yes, I have it on one of my older hard drives, just not sure which one and would take quite some time to locate.
However, I did also find it here, for a small fee: https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=48067
By the way, you should blank out your serial and IMEI numbers above...
santod040 said:
Yes, I have it on one of my older hard drives, just not sure which one and would take quite some time to locate.
However, I did also find it here, for a small fee: https://firmware.gem-flash.com/index.php?a=downloads&b=file&id=48067
By the way, you should blank out your serial and IMEI numbers above...
Click to expand...
Click to collapse
Thank you for help! Could you search your older hard drives for that firmware? Right now I can't login for Firmware-GEM-Flash, I get "Dfp is required" notification... I was able to login 2 days ago, now I can't
Matwar said:
Thank you for help! Could you search your older hard drives for that firmware? Right now I can't login for Firmware-GEM-Flash, I get "Dfp is required" notification... I was able to login 2 days ago, now I can't
Click to expand...
Click to collapse
OK, I'm downloading the firmware, it was caused by adblock software - I had to disable it for a while. Hope the RUU will work
Matwar said:
OK, I'm downloading the firmware, it was caused by adblock software - I had to disable it for a while. Hope the RUU will work
Click to expand...
Click to collapse
OK, it worked perfectly! Thank you for help!