Phillips 49pus6412/12 - Philips, Sony, TCL Android TV

Hello,
I have the following model of tv, it somehow bricked while it was doing OTA update and now it jumps to recovery after i power it on. Any ideas how to fix this?
Thanks

Hi,
install the latest firmware from recovery menu
[email protected]

Related

[Q] Bricked N5120

Hi My Tab N5120 was brikicked, i was trying to install a firmware from Odin then it gave me a failed, and that I was not able to make it work again.
I was able to go to the recovery screen (Volume down - power) after Using Odin for CF-Auto-Root-konalte-konaltexx-gtn5120 and RecoveryCWM6.03.2-GT-N5120, but every time i install a firmware like N5120XXCMG7_N5120BTUCMG7_BTU or N5120ZHBME1_N5120ZZHBME1_TGY it fails.
Can someone Help me please, I have this issue for a month now and no idea how to fix it
Bricked N5120
Did you managed to get your Tablet Unbricked? I just wanted to know because I have an N5120 with a broken LCD+Digitizer but the unit still powers ON, you can hear the Samsung booting sound, it charges and whem you touch the screen you can see the menu changing. Let me know you may be able to use the board inside.

SoftBrick with root - Help!

Please, somebody help me... I have a SM-T705m which I have rooted with android kit kat. After some months I got updated to the Lollipop and it was running ok, but it wasn't updating via OTA anymore.
Well, it happens that today I reset the tablet to the factory mode to sell it, but it was without unrooting, and then it got stuck on the screen saying "just a sec". I went further and tried to download some versions of the firmware and install it on the Odin3 without knowing exactly the number of the version Cause I couldn't turn on the gadget to look. I just got any firmware with the name of my model and my location (Brazil) on the site Sammobile.com....
But bang.... Now I can't turn it on because it is looping on the logo screen.... I tried to download the lollipop firmware and the kit kat..... Could somebody help me? it is looping and I need to sell it tomorrow. I would really appreciate it.
Boot to recovery POWER + VOL UP then factory reset.
Reflash the stock LL firmware.

2.20.40.196 update won't apply after reboot

Hi
I recently recovered my bricked Asus zenfone ZE551ML using a diy on this site.
Now, I am on firmware 2.20.40.194, I downloaded the latest available firmware 2.20.40.196, everything goes well, the phone reboot, fall in recovery mode, I click REBOOT and boom, no update apply...
Can someone help me with this strange problem?
Thank you very much!

lg g5 ls992 After Downgrade stuck here, need help

Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Try flash Zv8 with LG Up 1.11
If you have error , try another PC
Stuck on Same issue
Arslan1988 said:
Hello Team
i did mistake, i downgrade phone by octuplus box and now stuck here,
your device is corrupt. it cannot be trusted
and will not boot/
phone not going in download mode,
only when try with vol+ to enter in download mode, its show download mode screen for 1sec and then back to this error, please tell me how to solve out this problem.
by Jtag this device not supported yet Because of new UFS IC.
Best Regards
Arslan
Click to expand...
Click to collapse
Have you got Any Fix yet ? because i also did the same with my ls992 now my phone is not going in download mode its just showing you device is crupt with this link ((g.co/ABH)), it will fix when we get the ota update latest version of nougat, and i am searching for tha Ota file of OBV if any one tell where can i find the ota file that can flash with stock recovery otherwise my device will stay dead

Realme 6i not turning on after update

Hey,
I recently updated my Realme 6i to Android 11 using this link : https://www.realme.com/in/support/software-update
I plugged in my charger (Charge was around 71%), used the stock recovery to update and the device successfully installed the update. But when I selected the restart option, the device just shut down and did not turn on. After multiple attempts to get into the recovery of soft restart or force restart, the phone does not seem to turn on.
Has anyone else faced this issue and is there a solution to fix this? Would appreciate any pointers. Thank you
Update: Tired turning it on using the combo provided by the company (Vol Up button + power button). Tried that for around 2 minutes but did not work. Any pointers would be appreciated.
Thanks!
Hello i have the same problem. I think the problem occurs, when you install the RMX2040 update on a RMX2040EU. I tried to restore it with this russian guide: https://4pda.to/forum/index.php?s=&showtopic=1010977
But it's for the global RMX2040 and not for the RMX2040EU. We need a europe flashtool firmware. How can i get it?
any update to this?

Categories

Resources