Hi My Tab N5120 was brikicked, i was trying to install a firmware from Odin then it gave me a failed, and that I was not able to make it work again.
I was able to go to the recovery screen (Volume down - power) after Using Odin for CF-Auto-Root-konalte-konaltexx-gtn5120 and RecoveryCWM6.03.2-GT-N5120, but every time i install a firmware like N5120XXCMG7_N5120BTUCMG7_BTU or N5120ZHBME1_N5120ZZHBME1_TGY it fails.
Can someone Help me please, I have this issue for a month now and no idea how to fix it
Bricked N5120
Did you managed to get your Tablet Unbricked? I just wanted to know because I have an N5120 with a broken LCD+Digitizer but the unit still powers ON, you can hear the Samsung booting sound, it charges and whem you touch the screen you can see the menu changing. Let me know you may be able to use the board inside.
Related
Hi, I am new in this forum, and I hope someone can help me. My phone is Samsung Note 2 N7100
I tried to install a new OS and it works. Suddenly, my phone reboot a automatically, and then it stuck on the Samsung LOGO.
What's worse, i can't get into recovery mode (I made a screen shot here when i getting into and it has been attached below) so that i can't do anything else.
dgwufan said:
Hi, I am new in this forum, and I hope someone can help me. My phone is Samsung Note 2 N7100
I tried to install a new OS and it works. Suddenly, my phone reboot a automatically, and then it stuck on the Samsung LOGO.
What's worse, i can't get into recovery mode (I made a screen shot here when i getting into and it has been attached below) so that i can't do anything else.
Click to expand...
Click to collapse
Ouch, that's out of my knowledge range
Good luck....i know that feeling when you brick your phone. Makes you want to build a time machine and go back 30 minutes before you screwed up.
u can go to download mode right ? just flash back stock firmware..
Hey I currently have the Galaxy Note 8.0 GT-N5100,
when i connect it to my pc it starts up and stops at the recovery screen. But it is flashing, the screen is always turning on and off.
What does that mean, and how can i fix it? I tried to reflash the firmware with kies but it doesn't recognize the phone. What is the easiest way to get the note back to work?
Thanks for your help
Hi guys
Im hoping someone can help here
Found out today my Galaxy Tab's screen was broken so have sent a request to samsung for a repair but I have a problem..
I want to be able to install stock firmware and un-root my device, but because my screen is broken I cannot figure out how to completely turn off the device (screen is completely black)
Any ideas please?
Thanks
You can blindly go to download mode and install stock rom via odin.
Have tried to use power+volume up and volume down to reboot but am having no luck, not sure how to do it via Odin?
I normally find a way around some android issues but sort of lost this time so iI need some help please!
Tablet is (was?) rooted and running cm12 plus twarp before the issue. It was running fine other than using a lot of battery.
So after replacing a battery my Note 8 N5110 started a boot loop and sometimes TWARP starts but does not work and it gets back to the boot loop!
I tried first re-load TWARP via odin and it passed but it was still in the bootloop so I tried load the stock firmware via Odin and I am getting failed with a
I have attached a picture of Twarp right before it fails, a picture of Odin with a failed attempt to load the stock firmware and the message I get on the Note 8 custom firmware screen.
Thanks in advance!!!
For the record I found a way out, the only thing that worked on my case was initialize the Tab using Samsung KIES.
Awesome software thanks Samsung, it saved my day and now....back to root and CM13 again
Hello glad you got it working. is it hard to replace the battery in these?
Hello Everyone,
This is my first thread on this forum, which i am making because I ran out of options, and don't know what to do....
My Samsung Galaxy S4 mini(GT-I9192) were shut down automatically when i am using it.After then I started my phone again
it starts normally but after the details Samsung Galaxy S4 mini(GT-I9192)comes and it again turn off and again restarts and
this process is going again and again.As I tell you my phone doesn't stuck on a boot as my phone restarts again before the samsung logo comes.
I've tried Emergency firmware upgrade and Initialization through kies but after entering model no. and S/N,
It says 'GT-I9192' does not support initialization. I've done that before with kies it never gives that error I don't know why now.
After That I tried to install stock firmware by Odin in download mode, The process gets completed pass message comes after that my phone reboots in recovery mode and a message print on the bottom "did not match size '/system/csc/common/system/csc/others.xml' (no data available)" i don't know what is that for and after that i reboot my phone and still same thing...
After all that I think maybe its an hardware issue but if it is an hardware issue then how my phone starts and again shutdown so i don't think it's an hardware issue btw i don't know what it is.
So Please If anyone Have any Solution please help me.
Thank You
I have same problem on my galaxy s4 mini gt-i9195 LTE.
first the phone doesnt wanna turn on at all, just show as QHSUSB_DLOAD
after xx hours googling for solution i try unbrick.img which bring the screen back in live:good:
then i try several roms but the phone reject the flash, so i try flash with original stock rom, that went successful
but that doesnt change something, still keep rebooting, even when load recovery it get reboot and keep rebooting.
I don't think that this might be a hardware issue, but something wrong with the android partitions.
I'll keep playing with it hope i find some solution.
If someone read this and has same or similar issue, please post what you have try so far, so we can work on it and find the problem.:highfive:
Thanks for your reply...
As my phone were start after flashing so many times and now it says Device Memory Corrupted Please reset your device to default
settings and there is a reset tab which doesn't working when i keep pressing that so now i think that maybe my eMMC chip was damaged well exactly i don't know that yet....
well for you just try connecting through kies and do a firmware upgrade and if that doesn't working than flash it through odin and also download PIT file for re-partition....