i saw the U1 firmware could be flashed over the U firmware on the S9 on some threads. i mainly want to switch to the U1 firmware cause i saw it has android 10 on it while the U firmwares dont yet. My S9 is running up-to-date firmware of G960USQS7CSK5. ive tried using odin, odin patched 3B, and odin modded by raymond all version 3.13.1. For the U1 firmwares ive tried DTA5 (android 10) and CSK2 (android pie) to flash over the U firmware thats currently running on my phone. when i use any of the odins besides the raymonds modded one. i get a fail error right after "setup connection". then for the raymond modded version ive tried twice now and first time i got a fail for "Auth write" and second time i got a fail after "initialization" but no reason why it fails. ive looked all over threads and the tips seem to be scrambled all over the forums about it but i cant seem to get a clear answer. any ideas how i can get this to go through? its becoming frustrating
Bump
Are you using the CSC or the HOME_CSC file? I tried flashing the U1 DTA5 firmware earlier today using the HOME_CSC file and got errors, but using the CSC file worked fine.
Hai Karate said:
Are you using the CSC or the HOME_CSC file? I tried flashing the U1 DTA5 firmware earlier today using the HOME_CSC file and got errors, but using the CSC file worked fine.
Click to expand...
Click to collapse
i tried both. got same result
UPDATE: swapped USB ports and everythings working now. thread can now be closed. thanks
Related
Guys
My mobile model is SM-N750 (Indian edition).
I have successfully flashed stock firmware thru ODIN earlier. Recently I changed my firmware to Pakistan from Sammobile.
Now I like to go back to Indian firmware, however it is failing again & again. I am though successfully able to flash Pakistan firmware again.
Phone is working properly but cant go back to Indian firmware.
Please check.
I know how to flash in ODIN. This is something diff.
1- Try another source of odin, same version but another source
2- Try flashing the firmware more than once, it will work in one of them
3- Try different firmware and see if it worker, then the problem is with the firmware
4- Make sure the files are for your mobile version
Thanks for your reply.
I have tried 3 firmware files. No luck.
I think I guess what is the issue. Pak firmware version is higher than Indian firmware version. So the bootloader has been changed. That is the reason it is not allowing to install a lower bootloader firmware.
I hope once sammobile will have KK firmware downloadable I would be able to flash that.
I am successfully able to flash Indian Kitkat ROM from Sammobile.
So the point to be noted...You can not go back to old firmware once you upgraded to new one.
This thread can be closed now.
KSKHH said:
I am successfully able to flash Indian Kitkat ROM from Sammobile.
So the point to be noted...You can not go back to old firmware once you upgraded to new one.
This thread can be closed now.
Click to expand...
Click to collapse
You from India??
and if you aren't, did you face any problems?
is it worth risk?
Omar_Moustafa said:
You from India??
and if you aren't, did you face any problems?
is it worth risk?
Click to expand...
Click to collapse
Yes, I am from India.
KSKHH said:
Guys
My mobile model is SM-N750 (Indian edition).
I have successfully flashed stock firmware thru ODIN earlier. Recently I changed my firmware to Pakistan from Sammobile.
Now I like to go back to Indian firmware, however it is failing again & again. I am though successfully able to flash Pakistan firmware again.
Phone is working properly but cant go back to Indian firmware.
Please check.
I know how to flash in ODIN. This is something diff.
Click to expand...
Click to collapse
check this www.mediafire.com/download/9qu1qs9j3514yd5/SM-N750+Orignal+Firmware.7z
sgatechwork said:
check this www.mediafire.com/download/9qu1qs9j3514yd5/SM-N750+Orignal+Firmware.7z
Click to expand...
Click to collapse
That did not work. I have tried that earlier. It was older that PAK firmware...
Now I am successfully flashed Kitkat.
Hi
I have a GT-I9195 with Android 4.2.2 xxxUBML4 baseband and buildnumber. If I update the device by Kies or flash it by Odin, everything works fine, except the baseband won't be updated, it is still baseband xxxUBML4 instead if xxxUCNH5 installed. So the Wifi doesn't work.
Even if I flash the modem itself by heimdall, it is still the old baseband installed, why? I have a Riff JTAG bridge, should I try to flash it directly?
My second device update worked fine.
Regards
cloooned
cloooned said:
Hi
I have a GT-I9195 with Android 4.2.2 xxxUBML4 baseband and buildnumber. If I update the device by Kies or flash it by Odin, everything works fine, except the baseband won't be updated, it is still baseband xxxUBML4 instead if xxxUCNH5 installed. So the Wifi doesn't work.
Even if I flash the modem itself by heimdall, it is still the old baseband installed, why? I have a Riff JTAG bridge, should I try to flash it directly?
My second device update worked fine.
Regards
cloooned
Click to expand...
Click to collapse
semi-normal .... use modem.bin and make it .tar.md5 using tar md5 packer tool and flash 2 times using ODIN in CP section not ap
Thanks, I did an intermediate step and flashed xxUCNH3 first and then xxUCNH5 and now it works... strange
Got another device, I followed your hint, flashed the modem even two times but still no success. I flashed it back to the previous version and back again, even Kies does not work.
Is this firmware or the device corrupt? Have downloaded the firmware from sammobile
Update:
It seems that the modem is not release after a restart and can't be update. If I shutdown the mobile and remove the battery, the next modem download works.
Hi everyone,
I know this problem is well known and solved many times already, but I'm not being able to solve it by myself. This is why I'm posting this thread as a last resort to try and get some help, just in case i missed something..
My phone is currently with unknown baseband and IMEI on stock 4.4.2 flashed via kies recovery. If I try to flash any 4.4.4 port ROM the phone locks up seconds after boot, it will only work with stock rom. I already tried a few modems i found on another threads but no success.
Can anyone help?
Thanks.
madz78 said:
Hi everyone,
I know this problem is well known and solved many times already, but I'm not being able to solve it by myself. This is why I'm posting this thread as a last resort to try and get some help, just in case i missed something..
My phone is currently with unknown baseband and IMEI on stock 4.4.2 flashed via kies recovery. If I try to flash any 4.4.4 port ROM the phone locks up seconds after boot, it will only work with stock rom. I already tried a few modems i found on another threads but no success.
Can anyone help?
Thanks.
Click to expand...
Click to collapse
restore efs backup
there is a thread about imei and patched DN4.
Update everything, modem, bootloader, get these from newest firmware downloaded from sammobile and post results
yaro666 said:
restore efs backup
there is a thread about imei and patched DN4.
Update everything, modem, bootloader, get these from newest firmware downloaded from sammobile and post results
Click to expand...
Click to collapse
Hi,
I already got latest firmware from kies temp directory but I have no idea where to get modem and bootloader.. Can you point me in right direction?
Firmware file from kies is N7100XXUFNI5_N7100ORGFNJ1_N7100XXUFNG1_HOME.tar
Thanks.
madz78 said:
Hi,
I already got latest firmware from kies temp directory but I have no idea where to get modem and bootloader.. Can you point me in right direction?
Firmware file from kies is N7100XXUFNI5_N7100ORGFNJ1_N7100XXUFNG1_HOME.tar
Thanks.
Click to expand...
Click to collapse
from sammobile, download newest firmware for your region and unpack it from stock rom and then pack it with 7zip to tar file and flash it with Odin.
you need sboot and modem
Double post
yaro666 said:
from sammobile, download newest firmware for your region and unpack it from stock rom and then pack it with 7zip to tar file and flash it with Odin.
you need sboot and modem
Click to expand...
Click to collapse
Isn't that a bit pointless? Maybe I'm missing the point, but if I already have flashed latest firmwares from both sammobile and kies, it kind of makes the point that modem and bootloader files from sammobile don't solve the problem, right?
Thanks.
Sent from my SM-G925F using Tapatalk
madz78 said:
Isn't that a bit pointless? Maybe I'm missing the point, but if I already have flashed latest firmwares from both sammobile and kies, it kind of makes the point that modem and bootloader files from sammobile don't solve the problem, right?
Thanks.
Click to expand...
Click to collapse
Well truly doesnt seem pointless
I got my baseband resolved (Previously showed 'Unknown') by flashing pure stock rom (got from SamMobile) THROUGH ODIN so might be there is a point.
Try stock rom flashing from odin as according to me stock rom has everything in it radio(Baseband),boot(efs), system, etc etc
The unknown baseband and imei can be due to a modem and bootloader mismatch.
To confirm the bootloader and modem on the phone, install the Samsung Phone Info app from the play store to confirm the version.
Hello,
I recently sideloaded the new OneUI beta ( https://www.xda-developers.com/install-one-ui-beta-samsung-galaxy-s9-galaxy-s9-plus/ ) and would like to know how I could reverse this process.
MehNameIsFrog said:
Hello,
I recently sideloaded the new OneUI beta ( https://www.xda-developers.com/install-one-ui-beta-samsung-galaxy-s9-galaxy-s9-plus/ ) and would like to know how I could reverse this process.
Click to expand...
Click to collapse
Flash back to the Oreo firmware with ODIN... guides are all over XDA and sammobile
Since it's sideloaded I'm not sure if it will work but the latest version of Smart Switch for Windows has an option to roll back the OTA's to Oreo.
I am in the same position as the op. I have the rom I need to flash. Should I flash all components including bl, csc, ap etc or just ap? Smart Switch doesn't allow me to roll back. Cheers.
pjam said:
I am in the same position as the op. I have the rom I need to flash. Should I flash all components including bl, csc, ap etc or just ap? Smart Switch doesn't allow me to roll back. Cheers.
Click to expand...
Click to collapse
All, flash the same way you would any time, and use CSC not HOME_CSC
Hi all. Is it possible to roll back using smart switch for Mac? I don't have access to a Windows PC, so if it's not possible to roll back using the Mac version, is there any other way apart from Odin?
I have successfully gone back to Oreo. UK rom from updato. Odin 3.13.1 Flashed bl, ap, cp and csc (not csc home). I had the latest smart switch installed but no option to go back to Oreo in it. Thanks for advice on here.
pjam said:
I have successfully gone back to Oreo. UK rom from updato. Odin 3.12. Flashed ap, cs and csc (not csc home). I had the latest smart switch installed but no option to go back to Oreo in it. Thanks for advice on here.
Click to expand...
Click to collapse
ODIN 3.12?
ODIN 3.13.1 was needed for Oreo
Oops my bad. 3.13.1
You can with odin. Tested by me and many others.
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
where is home csc,there is only 4 but must have 5 to flash...
imenko79 said:
where is home csc,there is only 4 but must have 5 to flash...
Click to expand...
Click to collapse
It's same as csc, if you flash home csc it doesn't wipe. If you flash only CSC, it wipes your phone. You select one of them, you can't flash both.
And as you see, I succesfully flashed an older firmware. The problem is that odin can't flash the newest firmware.
y.erenbektas said:
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
Click to expand...
Click to collapse
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
dezborders said:
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
Click to expand...
Click to collapse
I'll give this next weekend. Thanks ^^