Develop Bugs

ask about gsi images

Hello everyone I need help
How I install gsi ROM like hydrogen oxygen
In mi a2 lite daisy I have twrp but now I have miui ROM
Can I flash without reflash firmware in pc ? More options like a flash vendor boot or what thanks have a nice day my slot is A/B but boot set in (B)

robin_vilensky_ said:
Hello everyone I need help
How I install gsi ROM like hydrogen oxygen
In mi a2 lite daisy I have twrp but now I have miui ROM
Can I flash without reflash firmware in pc ? More options like a flash vendor boot or what thanks have a nice day my slot is A/B but boot set in (B)
Click to expand...
Click to collapse
First of all many users are confusing rom with firmware, the whole rom is flashed through fastboot or EDL (although OTA updates could be flashed through recovery) while the firmware is a small set of files that can be flashed through recovery in form of zips.
What I did to boot many GSIs out there? although any of them satisfied due to many bugs comparing with the developed custom roms for Daisy.
- Go to recovery and backup just the boot partition.
- Then format data.
- Then advanced wipe; data, system and cache/ART Dalvik cache.
- Transfer GSI to your device using any convenient method (transferring file or copying to your external SDcard)
- Flash the GSI on System Image partition.
- Restore the boot partition.
- Flash only the firmware zip (version may vary) Never I needed to flash the whole rom.
- Flash DFE.
- Switch to the other slot and reboot.
- If device won´t boot it could be required to flash a proper vendor version through fastboot. Pay attention to the slot that you flashed before to target the same slot if you need to flash this partition.
With this method I could boot to OneUI, Moto, nubia, ZenUI, HydrogenOS and Xperia while I can´t on ZUIOS and didn´t try with FlymeOS

Can I flash firmware via twrp ? Thanks

robin_vilensky_ said:
Can I flash firmware via twrp ? Thanks
Click to expand...
Click to collapse
Yes, this is why they´re done this way, to updates just some essential partitions, there is a thread here where you can download them.

SubwayChamp said:
Yes, this is why they´re done this way, to updates just some essential partitions, there is a thread here where you can download them.
Click to expand...
Click to collapse
,
Thank you ! You can send me link for firmware zip for twrp ? Thanks and it's not removed the twrp?

robin_vilensky_ said:
,
Thank you ! You can send me link for firmware zip for twrp ? Thanks and it's not removed the twrp?
Click to expand...
Click to collapse
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.

SubwayChamp said:
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.
Click to expand...
Click to collapse
From here it's okay ? https://c.mi.com/oc/miuidownload/detail?device=1700354 for twrp

SubwayChamp said:
I'm now far from a pc, under Guides section you can find it.
Doing this way you won't need to reflash TeamWin.
Click to expand...
Click to collapse
Thank you bro iam fine thanks for helping

robin_vilensky_ said:
From here it's okay ? https://c.mi.com/oc/miuidownload/detail?device=1700354 for twrp
Click to expand...
Click to collapse
I´m back, the link is to download the whole rom.
Remember the difference between rom and firmware that I mentioned before?.
This is the link for firmwares https://forum.xda-developers.com/mi-a2-lite/how-to/firmware-updates-daisy-t3975879
Anyway you´ll need sometimes the whole rom and sometimes it´ll be enough flashing just the firmware.

SubwayChamp said:
I´m back, the link is to download the whole rom.
Remember the difference between rom and firmware that I mentioned before?.
This is the link for firmwares https://forum.xda-developers.com/mi-a2-lite/how-to/firmware-updates-daisy-t3975879
Anyway you´ll need sometimes the whole rom and sometimes it´ll be enough flashing just the firmware.
Click to expand...
Click to collapse
Thanks for help bro big respect

How to install recovery stock images

hey happy new year guys i searched alot but no luck , i downloaded recovery stock rom 10.0.17.0 from here
https://mirom.ezbox.idv.tw/en/phone/daisy/roms-global-stable/
but when i try to flash it from recovery i get an error what is proper way to install it (knowing that i'm on 10.0.3.0 ) please asap ??

If I'm not mistaken, I think that the link you provided is to a file that will contain a payload.bin, which would also need to be extracted. Maybe try from this link and extract the tgz & tar file to gain access to flash_all.bat/images.
I also had errors trying to flash the image as well but the path to the flash file was long (N:\Android\Xiaomi\Images\daisy_global_images_V10.0.17.0.PDLMIXM_9.0-2). When I simply moved the folder to the N drive it worked beautifully (N:\daisy_global_images_V10.0.17.0.PDLMIXM_9.0-2).
Hope that helps & good luck!

farrouk said:
hey happy new year guys i searched alot but no luck , i downloaded recovery stock rom 10.0.17.0 from here
https://mirom.ezbox.idv.tw/en/phone/daisy/roms-global-stable/
but when i try to flash it from recovery i get an error what is proper way to install it (knowing that i'm on 10.0.3.0 ) please asap ??
Click to expand...
Click to collapse
To install that, maybe TWRP can do it?
Else you will need to extract the images from payload.bin (use payload dumper) and flash each image using fastboot.
Probably flash them to the other slot and then change active slot. But you won't need to do that since you're flashing from fastboot.

a1291762 said:
To install that, maybe TWRP can do it?
Else you will need to extract the images from payload.bin (use payload dumper) and flash each image using fastboot.
Probably flash them to the other slot and then change active slot. But you won't need to do that since you're flashing from fastboot.
Click to expand...
Click to collapse
twrp doesnt do it and payload dumper seems alot of work it's okay i found fastboot rom of 10.0.17.0 , anyway my trouble now is what is the proper way to install magisk and twrp along side ? please

farrouk said:
twrp doesnt do it and payload dumper seems alot of work it's okay i found fastboot rom of 10.0.17.0 , anyway my trouble now is what is the proper way to install magisk and twrp along side ? please
Click to expand...
Click to collapse
I followed this using offain's TWRP. Rather than pushing the files with adb, I had them loaded on my sd card. Just follow the guide & you'll be good.
Link not working - remove spaces below:
https://www.the custom droid .com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/

mn1968 said:
I followed this using offain's TWRP. Rather than pushing the files with adb, I had them loaded on my sd card. Just follow the guide & you'll be good.
Link not working - remove spaces below:
https://www.the custom droid .com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/
Click to expand...
Click to collapse
thnx i'll give it a try and feedback

How do I extract a boot image from a GSI rom without TWRP.

I recently bought a Chinese phone from a relatively unknown manufacturer, so I was unable to find any TWRP images that match the device, I was wondering if it was possible to extract the boot image directly from a GSI ROM. My end goal is to install Magisk so if there is a better way to go about this please let me know.

can you tell model and brand

Hsnmastoor said:
can you tell model and brand
Click to expand...
Click to collapse
Thank you for replying,
The phone is the Cubot X20 pro, it is running the Unofficial Pixel Experience GSI ROM.

XDA-Developer30 said:
Thank you for replying,
The phone is the Cubot X20 pro, it is running the Unofficial Pixel Experience GSI ROM.
Click to expand...
Click to collapse
your welcome its mediatek download stock rom extract it and port twrp with hovatek twrp porter

Hsnmastoor said:
your welcome its mediatek download stock rom extract it and port twrp with hovatek twrp porter
Click to expand...
Click to collapse
Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
If you wish to root your Mediatek Android phone, we'd dropped a guide on rooting using Magisk and stock boot.img at https://www.hovatek.com/forum/thread-21427.html , no custom recovery is required. Se
forum.hovatek.com

Due to my understanding, GSI have no boot.img , it uses stock boot image ( along with all other needed partitions ). So if your purpose is to root using Magisk, just find the correct boot.img of the current stock firm on your device before GSI and patch it with Magisk!

LinhBT said:
Due to my understanding, GSI have no boot.img , it uses stock boot image ( along with all other needed partitions ). So if your purpose is to root using Magisk, just find the correct boot.img of the current stock firm on your device before GSI and patch it with Magisk!
Click to expand...
Click to collapse
Thank you for the reply, I forgot to mention that I used Hsnmastoor's method successfully.

LinhBT said:
Due to my understanding, GSI have no boot.img , it uses stock boot image ( along with all other needed partitions ). So if your purpose is to root using Magisk, just find the correct boot.img of the current stock firm on your device before GSI and patch it with Magisk!
Click to expand...
Click to collapse
I use the boot.img file from the stock rom of my device, I patch it with magisk but I always end up in bootloop
how can i root my device?

elmapq said:
I use the boot.img file from the stock rom of my device, I patch it with magisk but I always end up in bootloop
how can i root my device?
Click to expand...
Click to collapse
And your device is...???

LinhBT said:
And your device is...???
Click to expand...
Click to collapse
Tecno Spark 6 ke7

LinhBT said:
And your device is...???
Click to expand...
Click to collapse
I have a Vortex V22 MTM6761 There is no stock rom. It has unofficial GSI Pixel experience plus 13.0 running on it. I too would like to root. How can I retrieve the boot.img file from the GSI rom? Or how can I pull it from the phone via terminal and fastboot? All help is greatly appreciated! Happy Saint Patricks Day!

For devices which powered by MediaTek SOC, after flash the patched boot.img, you will need to flash patched blank vbmeta.img in order to bypass AVB with follow command :
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
in which vbmeta.img is a patched blank vbmeta of your device

LinhBT said:
For devices which powered by MediaTek SOC, after flash the patched boot.img, you will need to flash patched blank vbmeta.img in order to bypass AVB with follow command :
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
in which vbmeta.img is a patched blank vbmeta of your device
Click to expand...
Click to collapse
Thank you for the quick reply. I'm not sure I quite understand your message.
Flashing a vbmeta.img will give me a boot.img? I have a GSI PixelExperience 13.IMG file. The command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img was flashed along with it. It was running a different rom prior to flashing the GSI PixelExp 13.IMG
All I want to do is Root the device. I've been told over and over I need the boot.img partition to modify for Root access, but I can't get unless i'm in Root or have access to the current ROM BOOT.IMG, Correct?
Why is the BOOT.IMG or Payload.BIN missing from GSI IMG ROMS? is there another way to convert or pull from a ROM like that?

defcondoc said:
Thank you for the quick reply. I'm not sure I quite understand your message.
Flashing a vbmeta.img will give me a boot.img? I have a GSI PixelExperience 13.IMG file. The command fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img was flashed along with it. It was running a different rom prior to flashing the GSI PixelExp 13.IMG
All I want to do is Root the device. I've been told over and over I need the boot.img partition to modify for Root access, but I can't get unless i'm in Root or have access to the current ROM BOOT.IMG, Correct?
Why is the BOOT.IMG or Payload.BIN missing from GSI IMG ROMS? is there another way to convert or pull from a ROM like that?
Click to expand...
Click to collapse
Yep, I think u misunderstanding me from my very first msg. What I meant back there was : GSI ROM is what called Generic System Image. Which means, it has ONLY system.img that you will need to flash into system partition of the device. Therefore, if you need the boot image in order to patch it with Magisk or else, you will need to extract the boot.img of the CURRENT ROM which is already running on your device ( and normally, it should be stock ROM ). Cuz to be in short, GSI ROM does not have any boot.img for you to seek for, my friend!

.

LinhBT said:
Yep, I think u misunderstanding me from my very first msg. What I meant back there was : GSI ROM is what called Generic System Image. Which means, it has ONLY system.img that you will need to flash into system partition of the device. Therefore, if you need the boot image in order to patch it with Magisk or else, you will need to extract the boot.img of the CURRENT ROM which is already running on your device ( and normally, it should be stock ROM ). Cuz to be in short, GSI ROM does not have any boot.img for you to seek for, my friend!
Click to expand...
Click to collapse
Thank you for the message my friend. I understand that part of it. There is no stock ROM, at least I don't think there is on it. It is a a/b system but I've tried to go back to factory reset but it does not work and goes into a boot loop. So I load the GSI pixel experience rom to get it working again.
So what you are saying is, if I do not have the stock ROM, I cannot get the BOOT.IMG, Correct? So I am pretty much out of luck to get a boot.img from a GSI? Is there another generic ROM I could use that would have a boot.IMG? Ive tried a dozen ROMS and the latest pixel experience 13 unofficial rom was the only one that worked. Maybe Im trying the wrong ROM's. I do know I need A/B versions of them, I think.
If anyone else might know a way to help get me out of this situation, I would greatly appreciate. Thank you my friends!

defcondoc said:
Thank you for the message my friend. I understand that part of it. There is no stock ROM, at least I don't think there is on it. It is a a/b system but I've tried to go back to factory reset but it does not work and goes into a boot loop. So I load the GSI pixel experience rom to get it working again.
So what you are saying is, if I do not have the stock ROM, I cannot get the BOOT.IMG, Correct? So I am pretty much out of luck to get a boot.img from a GSI? Is there another generic ROM I could use that would have a boot.IMG? Ive tried a dozen ROMS and the latest pixel experience 13 unofficial rom was the only one that worked. Maybe Im trying the wrong ROM's. I do know I need A/B versions of them, I think.
If anyone else might know a way to help get me out of this situation, I would greatly appreciate. Thank you my friends!
Click to expand...
Click to collapse
You need to understand the basic core point is : GSI is ALWAYS system image only my friend. Boot.img can be found only on FULL ROM, not GSI. And there's always stock ROM for ANY DEVICES, what you need to do is just Google with keywords : Your-Device-Full-name Stock ROM Download. Then choose the correct one which is currently running on your device and download it. Boot.img will be right there on the zip.

LinhBT said:
You need to understand the basic core point is : GSI is ALWAYS system image only my friend. Boot.img can be found only on FULL ROM, not GSI. And there's always stock ROM for ANY DEVICES, what you need to do is just Google with keywords : Your-Device-Full-name Stock ROM Download. Then choose the correct one which is currently running on your device and download it. Boot.img will be right there on the zip.
Click to expand...
Click to collapse
Thank you! I do realize the obvious. If I was able to find it, I wouldn't be asking for help. I have rooted close to a hundred phones with stock ROM's going back over a decade.
What I'm asking is, What if the stock rom cannot be found? There is no other alternative way? I challenge finding this particular stock ROM.
Vortex V22 Model 2ADLJ-V22 MT6761V/WBB.
I have searched over and over for months on various search engines and found nothing. Maybe the ROM is uploaded somewhere in a different language other than English. I would be absolutely stunned if the stock rom was found on the internet.
Can I extract boot.img from terminal via fastboot or other linux or win program?

I have 2 models I cannot find stock ROM's for:
Vortex V22 Model 2ADLJ-V22 MT6761V/WBB - manufacture date year 2022
Moxee M2160 Model MH-T6000 2APQU-MH-T6000 Q6006_V1.0 - manufacture date year 2022
Can anyone find anything? I have scoured the web for months!
I can't believe there is nothing available for these phones.
Please let me know if you can find a stock ROM. I would love to learn where and how you found them. As I've have found nothing for months and months.
Thank you!!!

defcondoc said:
Thank you! I do realize the obvious. If I was able to find it, I wouldn't be asking for help. I have rooted close to a hundred phones with stock ROM's going back over a decade.
What I'm asking is, What if the stock rom cannot be found? There is no other alternative way? I challenge finding this particular stock ROM.
Vortex V22 Model 2ADLJ-V22 MT6761V/WBB.
I have searched over and over for months on various search engines and found nothing. Maybe the ROM is uploaded somewhere in a different language other than English. I would be absolutely stunned if the stock rom was found on the internet.
Can I extract boot.img from terminal via fastboot or other linux or win program?
Click to expand...
Click to collapse
You CAN extract the boot.img via terminal ONLY IF you're on a ROOTED devices!

Question Fastboot Stock Roms

Hey guys, more and more Roms are coming out for our beloved OnePlus 9 pro. I had a 6 and 7tp before and there were stock oos Roms, which you could easily flash via Fastboot and have OOS back.
It's just more convenient to simply have one file instead of flashing all images and so on
It'll be so great if any developer could try to create one, since it shouldn't be so difficult (at least that's what I guess haha)

I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"

Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
thanks for this bro much appreciated

fastboot -w not correct work
d:\Software_Tools\Multimedia\Handy-Taplet\Handy\Backup\Download\Rom\Payload Dumper 64 bit\payload_output>fastboot -w
Erasing 'userdata' OKAY [ 1.960s]
CreateProcess failed: Das System kann die angegebene Datei nicht finden. (2)
fastboot: error: Cannot generate image for userdata

I owe you a beer Sconny, you brought me back from the brink! I didn't exactly use all of your files, so I'm not sure if I count as a tester, but I was able to use your fastboot commands from Flasher.bat and turn that into a shell script. I ran it not really knowing it was going to work, so I ended up not wiping beforehand but it looks like it turned out fine. Oh and I didn't use your zip, used my own and dumped the payload myself. Thanks again Sconny!

Sconny said:
I created one (11.2.7.7.BA), it should work, but need testers. Ofc, Use it on your own Risk, but we have MSM Tool
Test_EU_11.2.7.7.zip
drive.google.com
Extract the Zip and Run "Flasher"
Click to expand...
Click to collapse
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?

erad1 said:
Tested and it worked for me as well other than shows the same userdata wipe error as mentioned. Curious to ask if you could make a flashable zip to include just the latest firmware?
Click to expand...
Click to collapse
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?

Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
yep that is the latest

Sconny said:
Maybe I should implement another command or manual wiping should work. Isn't that the latest FW?
Click to expand...
Click to collapse
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.

https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...

erad1 said:
Yes but for flashing custom Roms you only need need some of the images flashed to the other slot prior to flashing the custom ROM zip. The system IMG and vendor IMG and some others are not needed. Comes in handy when moving from one custom ROM to another.
Click to expand...
Click to collapse
erad1 said:
https://t.me/havoc_oneplus8/23372
This is an example of it for OnePlus 8...
Click to expand...
Click to collapse
Never mind though as this was inaccurate on my part, vendor img is needed...my bad. This method just lets you flash to latest fw after you're already on a custom rom. So to say if a newer fw came out after you could update to it.

I will take a look on it when I've got more time, sorry guys. I need to test it on myself in order to provide this variant of restoring our devices, but I'm working much as hell atm and family stuff etc. Is more important. But I promise I will try to provide a fully functional package for all versions. System, ODM and Vendor is still buggy, but I have some ideas how to fix it

do u think this could work for AA?

Libra420T said:
do u think this could work for AA?
Click to expand...
Click to collapse
There should be the same bug with wiping. But I have an idea, I gonna download AA and will upload here. 1 hour needed
Uploading right now.

Here is the AA Version. Wipe Manually, i have to figure out why its not working, for me it does (Maybe cable, usb port?)
I am not a Developer, i'm just doing this for fun and testing when i have time. As always, use at your own risk.
I disabled Verity for the 3 Partitions, maybe that will help. If you guys have some Ideas, please let me know.
Once it is working flawlessly, i will create a thread and update the "tool" for BA/AA/DA Devices.
Test2_AA_11.2.7.7.zip
drive.google.com

Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download

Sconny said:
Gonna update to 11.2.8.8 soon, all versions. Waiting for all zips to download
Click to expand...
Click to collapse
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?

Pain-N-Panic said:
I'm rooted on T-Mobile stock 11.2.5.5 would I be able to flash 11.2.8.8 via fastboot? Or would I need to convert to EU first?
Click to expand...
Click to collapse
Just follow the tutorial in this forum

General Stock Firmware Collection for OnePlus 11

Official Links for OnePlus 11 >>
OTA updates:
ColorOS 13.0.0 A.05 China: Download
ColorOS 13.0.0 A.08 China: Download
ColorOS 13.0.0 A.09 China: Download
ColorOS 13.0.0 A.10 China: Download
OxygenOS 13.0.0 A.07 IND: Download
Oxygen OS GDPR 13.0.0 A.08 : Download (Link by @ChrisFeiveel84)
OFP/EDL Packages:
CPH2449GDPR_11_A.09_2023032401370000: Download
PHB110domestic_11_A.10_2023022300270196: Download
CPH2447export_11_A.06_20230107233900 : Download
PHB110domestic_11_A.08_2023011401410122: Download
CPH2449GDPR_11_A.06_2023010723370128: Download
CPH2449GDPR_11_A.07_2023020200120000: Download
USA CPH2451export_11_A.06_2023010723390000: Download
CPH2447export_11_A.09_2023032013340129 : Download
Extracting Payload.bin
use payload dumper go from https://github.com/ssut/payload-dumper-go
Make a Complete backup for safety
use partition backup restore (root) from https://forum.xda-developers.com/t/tool-root-adb-partition-backup-restore-tool-for-windows.4512231/
Unbrick tool (fastboot):
use fastboot tab, you have to extract payload.bin
Download: https://mega.nz/file/WA4WyQaA#XhfJbtyUU7exNApLl6xOVUiL_kONc0Kd_QM_pGj2Doc
Fastboot Operations:
use fastboot enhance from https://github.com/libxzr/FastbootEnhance
avoid payload.bin flash (there are many hardbrick in op10 pro after flashing payload.bin)
don't flash a file that belong to bootloader in most cases it's a .mbn or .bin file
Hardbrick Solution:
No Free solution, only MSM Auth
Identification of Hard brick:
A hard brick refers to a device that is no longer able to boot up or function properly due to a software malfunction.
Volume up + down + USB = 9008 Port in device manager under COM Port
1. black screen even after pressing keys
2. 9008 device in device manager
3. Qualcomm bulk device in device Manager
Only Black Screen No Bulk or 9008 Device in Device Manager: this the totally dead condition if device stuck on black screen & not show a 9008 Port then you have to short test Point, this is the major issue after flashing a bootlader image from fastboot, flashing boot & system related partition not cause hard brick, so i already mention above don't flash a mbn or bin file from fastboot (these files mostly available in ofp/EDL ROM)

Though the global version will be launched within two weeks, from the title I really thought that this was about the global rom.

jinglei207 said:
Though the global version will be launched within two weeks, from the title I really thought that this was about the global rom.
Click to expand...
Click to collapse
How come?

Does someone know how to extract files from system.img (and others)? This seems to be not ext2/4 partition, so can't mount it as older 1+7pro OTAs. Some files (i.e dsp.img) are mountable, but others are not, unfortunately.
UPD: it's EROFS, my system is just too old to mount it automatically.

jinglei207 said:
Though the global version will be launched within two weeks, from the title I really thought that this was about the global rom.
Click to expand...
Click to collapse
confirmed model number CPH2447, Global ofp firmware added

mark332 said:
confirmed model number CPH2447, Global ofp firmware added
Click to expand...
Click to collapse
thanks for the link to the global firmware. i am currently in coloros trying to convert to oos you just added above. sorry for some basic questions, i am new to this. you mentioned to extract payload.bin and then warned about avoid flashing payload.bin in fastboot enhance, can you clarify or help me or point me to steps that i can flash the global version? thanks in advance.

mark332 said:
confirmed model number CPH2447, Global ofp firmware added
Click to expand...
Click to collapse
uh, now they fully switched to OPPO model number style, what a nice move ****(one)plus have done

mark332 said:
confirmed model number CPH2447, Global ofp firmware added
Click to expand...
Click to collapse
Wow, that's great. It will be helpful if you can also make a tutorial or share more tips of how to flash the global rom.

has anyone successfully converted their OP11 ColorOs to OOS yet?

Actually, I don't think it's a complete OFP package, we can do nothing this moment about converting your system to a GLOBAL version.

Well, its not a OFP for sure. But flashing it manually works.

kaijern said:
Well, its not a OFP for sure. But flashing it manually works.
Click to expand...
Click to collapse
I need to know how to flash it manually!

ryshd296 said:
I need to know how to flash it manually!
Click to expand...
Click to collapse
I just finished flasing. not too sure will there by any additional risk

kaijern said:
I just finished flasing. not too sure will there by any additional risk
Click to expand...
Click to collapse
thx!
Which files should I flash?

kaijern said:
Well, its not a OFP for sure. But flashing it manually works.
Click to expand...
Click to collapse
Do everything works so far ? I saw your thread, but something about replacing extension from .img to .mbn or .elf is a bit confusing.
Which file exactly that need to be changed if i may know ?
Thank you

otonieru said:
Do everything works so far ? I saw your thread, but something about replacing extension from .img to .mbn or .elf is a bit confusing.
Which file exactly that need to be changed if i may know ?
Thank you
Click to expand...
Click to collapse
says,
the original tutorial is asking to run fastboot flash cpucp cpucp.bin and cpucp.bin seems to be missing and there are only cpucp.elf. So use cpucp.elf
so far everything works good. 5G, 4G, wifi works good. Just there is a minor issue with relocking the bootloader the lock screen passcode did not work. So, i keep it unlock
Just bare in mind, this is a temporary solution to bring the phone from coloros to oxygen. After Feb 7 when the international version is available. I still need to redo the firmware flashing. But that time is just like a Oxygen OS upgrade and it will be way easier.

kaijern said:
Well, its not a OFP for sure. But flashing it manually works.
Click to expand...
Click to collapse
it's pre extracted, use images folder inside the achieve, is there any FWupdate.elf in it

mark332 said:
it's pre extracted, use images folder inside the achieve, is there any FWupdate.elf in it
Click to expand...
Click to collapse
nope

kaijern said:
Well, its not a OFP for sure. But flashing it manually works.
Click to expand...
Click to collapse
did you get all the img files from "images" and "radio" folders?

luciusz said:
Actually, I don't think it's a complete OFP package, we can do nothing this moment about converting your system to a GLOBAL version.
Click to expand...
Click to collapse
it's a complete EDL ROM from manufacture, if it's not a ofp then i think you will not get ofp for this device because latest version of MSM Download tool support a Pre Extracted File Like the above one