Hi, today, I turned on my PLAY and it got stuck on the lockscreen, It wasn't responding so I pulled off the battery, then I boot it again but I don't have backlight, any light on the power button and the phone is very very slow and the touchscreen doesn't work correctly. I flashed R800i 4.0.2.A.0.58 EnhancedV2 firmware but I have the same problem...
Some ideas?
PD: No warranty, unlocked bootloader. I was using Gin2JellyBean 1.8.1
EDIT: Hi! I've just flashed UK version firmware and I can operate with my phone, still laggy (for example, booting, unlock screen, etc), entered into Service Menu and checked Led/Ilumination Test, stills the same problem, no backlight or led in the power button, and checked accelerometer and gives: Error in acelerometer sensor
EDIT: I had a continuous screen blinking(think that is the backligh cable problem), whe phone auto disables the screen, it remains some time in a black screen with the backlight on
I still having problems with unlock screen, the screen is so unresponsive
EDIT: After shutting down the phone, stills blinking a black sscreen with the backlight on and the blue led is blinking each 5 seconds (aprox.)
S34Qu4K3 said:
Hi, today, I turned on my PLAY and it got stuck on the lockscreen, It wasn't responding so I pulled off the battery, then I boot it again but I don't have backlight, any light on the power button and the phone is very very slow and the touchscreen doesn't work correctly. I flashed R800i 4.0.2.A.0.58 EnhancedV2 firmware but I have the same problem...
Some ideas?
PD: No warranty, unlocked bootloader. I was using Gin2JellyBean 1.8.1
EDIT: Hi! I've just flashed UK version firmware and I can operate with my phone, still laggy (for example, booting, unlock screen, etc), entered into Service Menu and checked Led/Ilumination Test, stills the same problem, no backlight or led in the power button, and checked accelerometer and gives: Error in acelerometer sensor
Click to expand...
Click to collapse
Re download stock ftf files, boot phone into recovery, wipe data, cache partition, & dalvic cache, flash new ftf
I'll do it when I in home
I let the phone charging all the night, then I turn it on and the backlight works, the phone stills a bit laggy, when I mount the SD card, after mounting, the phone dismounts it again, after do it 3 or 4 times, sometimes I get a red light on the power button.
Thank you for the help
EDIT: Fixed SD card issue, I had to put the back case on
SOmetimes the phone gets stuck in a black screen(baklight still on) and when it turn the screen blinks a bit (maybe flex cable is bad)
EDIT2: The screen is blinking continuously, it's llike if the backlight goes out for a few time and get back, whe the phone auto turn of the screen, remains in a black screen with the backlight on
Sorry for my english
Sounds more like hardware issues than software. As mentioned it could be the LCD cable, it may even be the light sensor. Flash back to stock for the meantime and let us know what happens, if it still flashes then it may mean a trip to the sony service centre
Xperia Player said:
Re download stock ftf files, boot phone into recovery, wipe data, cache partition, & dalvic cache, flash new ftf
Click to expand...
Click to collapse
At the moment, it was the solution =)
Thank you both I hope that's fixed
I'm having this wierd issues with my N900T and cant seem to figure what the problem could be. I got the device from a previous user and was on a CM ROM at that time, rooted and Custom Recovery installed. Then the powering on, getting into Download/Recovery had no issues. I got on a TW S7 Ported ROM and ran it for weeks but noticed these (issues)
- When the device is on, power button works perfectly fine on a single click. Sleeps and Wakes device good.
- When device is off, pusing the power button doesnt turn the device on. If i plug in a charger and the charging is on, then i pwer on, it works. Same as Recovery and Download mode.
I'm pretty sure my power key is ok cos it works well when the device is on and running. It also was working well when i got it from the previous user running a CM Rom. The issue was after i got on the TW Based Ported ROM!
I have tried ODIN the stock Firmware. Still getting the issue.
Any experience and solution please?
Found and read a similar thread here: https://forum.xda-developers.com/oneplus-5t/help/help-data-oneplus-5t-unresponsive-screen-t3824092
But in my case USB debugging was set to on, so maybe I can do something, just don't know how? (or the Pie update reverted it to "off", I say that because Windows don't see the phone as a drive when I plug it in on the lock screen)
In any case: After the upgrade to Oxygen OS 9.0.0, the screen has become unresponsive. This has happened occasionally on the Oreo version, and a restart would fix the issue. Now, after restarting, the screen is still unresponsive, I'm not able to get into the phone because I'm not able to put in my pattern. I held the power button and volume up for 10 seconds and tried to enter Recovery mode, but I can't get pass the pattern, because the screen is unresponsive. How do I fix this? Can I at least back up my data?
I flashed PE+ 11 gsi on mi pad 5 pro
it run smoothly for several days
but today i restart device and device is completely dead
screen is black, button combination are not working
what i need to do to power up again
Thanks in advance
Hi everybody,
I think this question was proposed many times, but this is a special case.
Actually, my Xiaomi Mi A2 stop working suddenly, when i tried to turn on again it froze on Android one screen.
The phone don't respond to any command ( volume up + power on, volume down + power on ) i can just recharge it
or turn on in the android one screen.
Is there a solution to this issue ? i have some important files in this phone and i need to recover them.
Thank you in advance.