Abnormal Power Issues - T-Mobile Samsung Galaxy Note 3

I'm having this wierd issues with my N900T and cant seem to figure what the problem could be. I got the device from a previous user and was on a CM ROM at that time, rooted and Custom Recovery installed. Then the powering on, getting into Download/Recovery had no issues. I got on a TW S7 Ported ROM and ran it for weeks but noticed these (issues)
- When the device is on, power button works perfectly fine on a single click. Sleeps and Wakes device good.
- When device is off, pusing the power button doesnt turn the device on. If i plug in a charger and the charging is on, then i pwer on, it works. Same as Recovery and Download mode.
I'm pretty sure my power key is ok cos it works well when the device is on and running. It also was working well when i got it from the previous user running a CM Rom. The issue was after i got on the TW Based Ported ROM!
I have tried ODIN the stock Firmware. Still getting the issue.
Any experience and solution please?

Related

[Q] Few problems with my phone

Dropped my phone too many times and now the power button doesn't work. I've been sliding out the keyboard to wake it up.
I tried using the CM9 'volume rocker to wake' feature but it doesn't seem to work most of the time. Specifically it only works when it's plugged in, or there is music/other app running in the background so I'm guessing my phone is sleeping too deeply to recognize it? is there a way to make it always work?
I've also had a few other deep sleep problems. Once in awhile my phone won't wake back up. After a night's sleep, I've had my phone freeze once the alarm activates (screen turns on and capacitive lights turn on but screen doesn't work and nothing helps except battery pull), this has also happened when I haven't used my phone in a little while and I get a phone call. Has anyone had this problem? It's especially horrible with my power button problem since I have no way to turn the phone back on after a battery pull without a charger on hand.
Finally, is there an easy way to fix the power button or should I just take it to Sprint?
Try reverting back to a stock rom or at least one based on stock and see if that works. If it doesn't then probably it's a hardware problem.
i can't get it into download mode to do anything (was originally going to revert to stock and take it to sprint). with the power button broken, i had to try adb reboot download and also reboot download with su from terminal emulator. both failed and just ended up doing a normal reboot...
anyone know how i can get into download mode to downgrade?
nvertigo said:
i can't get it into download mode to do anything (was originally going to revert to stock and take it to sprint). with the power button broken, i had to try adb reboot download and also reboot download with su from terminal emulator. both failed and just ended up doing a normal reboot...
anyone know how i can get into download mode to downgrade?
Click to expand...
Click to collapse
Use cwm to flash stock deodexed (using adb reboot recovery and the home button to select.
Sent from my Samsung Epic 4G using Tapatalk 2
for some reason the stock deodexed fc09 failed to install in TWRP. tried redownloading, no luck. can't find anythign about it in the thread, any ideas?
still can't get it into download mode either, and now i can't even turn it on despite having a charger. it just turns green and i haven't found any combinations that will turn it on.
nvertigo said:
for some reason the stock deodexed fc09 failed to install in TWRP. tried redownloading, no luck. can't find anythign about it in the thread, any ideas?
still can't get it into download mode either, and now i can't even turn it on despite having a charger. it just turns green and i haven't found any combinations that will turn it on.
Click to expand...
Click to collapse
Remove battery and sd card hit the power button a few times to make sure it is fully discharged. Plug into computer with battery out and try to get into download mode. Also make sure you are using a BB cable and not the stock one.
luckily I took it to sprint and they fixed it for free even though it was on CM...

[Q] can`t access recovery mode

I can`t get the phone in recovery mode.
Here is the issue:
Running Jedi mind trick rom three weeks. One day the phone restarted and got stuck in the boot screen.
The phone restarted and eventually keeps vibrating without display
After trying many times i did got in recovery mode so i could install the rom again (using darkside super wipe and then the rom). After one day it crashed again and again i installed an different rom which also crashed after several hours.
Now i can`t even get to download mode, Is this hardware related or do i need to use an usb jig to get this working again?
Does your phone screen turn on and at least show the Samsung logo? If not, and you said button combo presses do not work using a USB Jig will be your way to go to get back in to download mode.
By the way, did you flash the correct ROMs specifically for our phones? You shouldn't have experienced and crashes. Also, for the vibrating issue without the display, it had been mentioned that it could also be due to a stuck/dirty power button. If you can try, clean up around it.
FineTalent said:
Does your phone screen turn on and at least show the Samsung logo? If not, and you said button combo presses do not work using a USB Jig will be your way to go to get back in to download mode.
By the way, did you flash the correct ROMs specifically for our phones? You shouldn't have experienced and crashes. Also, for the vibrating issue without the display, it had been mentioned that it could also be due to a stuck/dirty power button. If you can try, clean up around it.
Click to expand...
Click to collapse
Yes it does show the samsung logo at starting up but after that it turns off with 1-2 seconds vibrating intervals.
I already cleaned the power button but without any satisfaction.
I did dropped the phone monday but not from a great heigth.
estimated: 1mtr above ground
Yes i did. I used the guides from galaxy2root.com
Well, if you were able to use a USB Jig to get into 'Download mode', get a stock ROM from here and flash it through Odin which is also included in the link. Good luck!

[Q] boot loop phenomen

hi!
suddenly my n7100 does reboots again, and again.
on start with the n7100 logo - while charging, the bat icon, it reboots - i can not go even into download mode.
if i disconnect the bat power, and leave it for 1 or 2 days it is working again, a few seconds.
i flashed new rom, wiped cache, and new recovery. sadly: no success. still in a boot loop.
i have looked in the internet and of course in this forum - does anyone know what to do, to get it alive again (well it is, but it is rebooting(((?
is the board broke? or the switch ( it is working as far as i see) - or some ram?
any help would make me glad
tia,
rasp
I guess it's not working when charger is connected ? So I understand from your post.?
Also which bootloader are you on? And which rom you flashed?
If you using kitkat notice that the bootloader is better to be the one from the kitkat rom.
Or do you used rom with Ultra saving mode the first time you got those bootloops.
Sent from my GT-N7100
note2nooby said:
I guess it's not working when charger is connected ? So I understand from your post.?
Also which bootloader are you on? And which rom you flashed?
If you using kitkat notice that the bootloader is better to be the one from the kitkat rom.
Or do you used rom with Ultra saving mode the first time you got those bootloops.
Sent from my GT-N7100
Click to expand...
Click to collapse
yes. charger is also not working. rebooting....
i used for about one year (!) - including wanam rom... this BL:
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship
and reflashed it yesterday again without any success. well the rom i did not reflash... only bootloader and recovery.
any tips to get this baby working again?
if i put a fully charged battery in it, it also reboots...
raspberryswirl said:
yes. charger is also not working. rebooting....
i used for about one year (!) - including wanam rom... this BL:
BL_N7100XXUEMJ5_1903221_REV04_user_low_ship
and reflashed it yesterday again without any success. well the rom i did not reflash... only bootloader and recovery.
any tips to get this baby working again?
if i put a fully charged battery in it, it also reboots...
Click to expand...
Click to collapse
So you're saying your phone reboots by itself as soon as you put the battery inside? Can you get into download mode without pressing the power button just press volume down + home button if download mode opens up that means your power button is messed up (either it's pressed all the time or you need a new power button)

[Q] S3 (I747) Powering off During Boot

Started two days ago. Phone would randomly power off and boot back up. Finally it shut off and would not power back on. I had Cm11 installed with CWM 4.0.4.6. The phone powers on after inserting the battery. The Samsung logo flashes and then it shows the "Galaxy S3" logo with the CM logo below it. The phone the powers off. I have done a factory reset, cleared both caches, formatted the system folder, flashed SlimKat from recovery and tried another known good battery. At this point I figured I would reflash CWM but if I put the phone into download mode, it powers off after just a few seconds as well.
If I boot the phone into CWM, the phone stays on as long as I want it to so it makes me think this might be fixable. Just need some help.
Except for recovery working, it sounds like the power button sticking. If you remove/replace the battery does it power on automatically? If so its definitely the power button.
Otherwise, let us know what firmware you are currently running on. Maybe reflashing in recovery could help.
DocHoliday77 said:
Except for recovery working, it sounds like the power button sticking. If you remove/replace the battery does it power on automatically? If so its definitely the power button.
Otherwise, let us know what firmware you are currently running on. Maybe reflashing in recovery could help.
Click to expand...
Click to collapse
It does power on automatically. Makes perfect sense that it is the power button. Is this repairable or replaceable? I start Googling around for power button issues.
Im currently running CWM 6.0.4.6 and SlimKat. SlimKat was only installed cause I thought CM 11 was the issue. At this point I would just like to get the phone to a point where I could sell it.
kylelever said:
It does power on automatically. Makes perfect sense that it is the power button. Is this repairable or replaceable? I start Googling around for power button issues.
Im currently running CWM 6.0.4.6 and SlimKat. SlimKat was only installed cause I thought CM 11 was the issue. At this point I would just like to get the phone to a point where I could sell it.
Click to expand...
Click to collapse
It can be replaced fairly easily, just look it up on youtube.
You can buy the part off Ebay (or any other site you might prefer) for fairly cheap.

Phone won't turn on after mistakingly running it in bootloader mode.

My device is the LeEco Le One Pro (Stock rom, custom teamwin recovery, clockwork I think) right, and I had some charging issues, as to where the charging would disconnect every 5 seconds and then reconnect, and the only way I've found to fix this was just to turn off the phone and charge it, tho clearing cache works sometimes. I wanted to clear cache but held volume down instead of volume up to load into the recovery and the linux penguin showed up. I turned off the phone and now it won't turn on. Even when plugged in to a charger doesn't work, and it's not detected on the pc.
Any suggestions? I really wouldn't believe that the phone would brick itself for no apparent reason.
EDIT: All gud
Hi !
A helpful guide here https://forum.xda-developers.com/leeco-le1-pro/how-to/leeco-le-1-pro-x800-hard-brick-fix-t3393161
Good luck !
Just hold the on button for a very long time!

Categories

Resources