Related
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
F2-SuccessoR said:
Hello,
I need your help! My phone total bricked,
My computer suddenly shutdown when i flash my phone.
Now no led indication, can't turn on, only detect Qualcomm HS-USB QDLoader 9008 Driver.
Thanks before.
Click to expand...
Click to collapse
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Susheel_22 said:
it turns blue for me... But where do i get kernel and rom of xperia m? I have searched on this forum but couldn't figured out yet. Any help would be appreciated
Click to expand...
Click to collapse
k np...no need of kernel i think...just flash rom..\
rom will be mention as firmware...so please dont confuse...rom and firmware are same...
download a .ftf of ur latest firmware of ur device[c1904/c1905/c2004/c2005 i think u know urs..] and flashtool...
use flashtool and flash the ftf...
u can see the firmware in xperia m android development...
for flashtool https://unrestrict.li/flashtool
guide here...
http://forum.xda-developers.com/showthread.php?t=2054486
alvinhochun said:
How did you flash it? If you were using PC Companion or SUS, I believe the warranty may cover that.
Otherwise, let's see...
According to Google search, the Qualcomm CPU has a built-in USB download mode, which is the "Qualcomm HS-USB QDLoader 9008" that you see. When the device fails to boot it will enter this mode.
Perhaps try to enter flashmode?
Pull out the battery and wait for about a minute or so.
Insert the battery, close the back cover, then hold Volume Down key.
Insert USB cable and wait for the PC to detect it.
If the PC detects it, then flash (again)!
If the PC does not detect it or it detects as "QDLoader" again, perhaps try to pull out the battery and wait longer...
If it keeps entering "QDLoader" then your phone is really hard-bricked. It may still be possible to reflash, but we don't have the drivers and files, so just send it back to warranty, whatever.
* Just by the way, I think you can also enter the "QDLoader" mode by pressing Power + Vol Up + Vol Dn?
Click to expand...
Click to collapse
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
F2-SuccessoR said:
Thnx all for your answer
I was tried your solution but still no solve yet. Computer only show Qualcomm HS-USB QDLoader 9008 driver. No more indication or led whatever.
I also can't entering to fastboot mode or adb mode. All button look no function.
Please more help. thnx
Sorry for my bad english
Click to expand...
Click to collapse
i can see these 2 option for u//..as far as i know...
http://forum.xda-developers.com/showthread.php?t=2136738
http://mobiletechvideos.mybigcommerce.com/
but i cant assure u that it will unbrick..mostly they said it works...so i gave them to u...
its very risky to use both option...
its ur decision...use any option...or dont use..
or u can take ur phone to sony..they may fix it...
hope u will unbrick ur phone :fingers-crossed:
Hi I got a similar case :/ I was partitioning my sd card with Aparted but as soon as I turned off my Xperia M to reboot it it got bricked and hasn't been working since. Cant get it to into flashboot mode or flashmode to flash the original firmware. No lights or buttons are working although when I connect it to my pc it detects it in usb but not as the phone itself. Is there anyway at all I can fix this. Any help will be greatly appreciated.
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
SharpnShiny said:
For everyone with the brick situation, do you have a locked bootloader?
I know one user said they tried the volume down+insert USB cable into the computer, you did try this with PC Companion ready to repair the software?
Sony Update Service restores the bootloader on locked bootloader phones, true? If the stock bootloader is corrupt somehow, SUS could repair it.
Click to expand...
Click to collapse
My bootloader is unlocked!!
Sent from my GT-P3110 using XDA Premium 4 mobile app
ansebovi said:
try fastboot....see if the led turns blue..[power + vol up for fastboot]
if it turns blue...its not hard brick...flash kernel..then flash rom
Click to expand...
Click to collapse
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
samokel said:
I am having the same issues as well, but with my Xperia V. It doesn't come up at all. It only shows the green LED when I try to fastboot or try flash mode. Please help me to resolve. I can't stand the wait for waranty to resolve. How can I still flash custom ROM?
Click to expand...
Click to collapse
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
ansebovi said:
put harge for 2-3 hrs,then download ftf of v....then try to flash using flashmode[hold vol down + power]
Click to expand...
Click to collapse
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
u need to unlock bootloader first...then u can...
Hi The problem is that the phone c2005 flash mode is not the case for the moment the green light turns on and then turns off and the phone is in a state of zeus mode.
samokel said:
ansebovi, thanks so much. You can't imagine how much I've trouble seeking help. My phone is now up, with the stock ROM. Can I flash a custom ROM with Flashtool?
Click to expand...
Click to collapse
Root > Unlock your Bootloader > Flash Custom ROM from flashtool or from CWM recovery mode
This qdloader is how Sony load the phone with software in the first place. Qualcomm's version of flashmode. Afaik only OEM have access to the software for this.
Sent from my C1905 using XDA Free mobile app
plz help me
unbrick xperia m dual
hey buddy..here is the 100 % working solution
dowload these first
1. ftf file for xperia m dual c2004 - http://forum.xda-developers.com/showpost.php?p=53348374&postcount=1
2. xperia flash tool - http://sd-64701.dedibox.fr/page/news/flashtool-0.9.16.0-windows.exe-download
procedure
1) install the xperia flash tool
2) extract the 1st part of dwonloaded ftf using winzip. It will automatically extract all the other into a single file.
3) Go to the installed location of flash tool.Click divers and install necessary drivers.
4) Now run the flashtool. Click on flash icon and choose flashmode.
5) browse the ftf file u extracted and click on flash
6) now the files will be prepared for flash. A pop up appears and asks u to connect the phone.
7) turn off the device . PRESS THE VOLUME DOWN BUTTON AND THEN CONNECT TO THE PC USING USB CABLE.
8) Flashing starts to proceed.
9) After flash is complete unplug the device . Remove the battery . After few minutes insert the battery and turn on the device
10) intitial boot takes time.
:good::good:
Guys, i need help too!!!! :'(
I tried to swap my internal and my external memory by using the mothod on a video on youtube called "how to swap xperia m /dual on 4.3".
And here's what happened after I rebooted: My xperia M is stuck on the boot screen (it goes till the multicoloured wave), and then it starts up again and again and again!!!! Also, I can't get my phone to connect in flash mode when I connect it to my pc so as to install the official ftf file I've downloaded, becase when I try to connect it with my pc, the phone's led just turns up red, then green (for just some seconds), and then goes back to the booting screen!!!! I have an Xperia M single sim, rooted, with a locked bootloader!! PLEASE HELP ME, I DON'T KNOW WHAT TO DO ANYMORE!!!!! :'(
When I boot my device no shows LG logo and does not come into download / recovery mode :crying:
any idea to fix it?
AnDyZ-BR said:
When I boot my device no shows LG logo and does not come into download / recovery mode :crying:
any idea to fix it?
Click to expand...
Click to collapse
What does it say when you plug it into the computer?
QHUSB_BULK?
I guess the better option is to try using LG flash tool to flash kdz, not sure if download mode will be booted since you mentioned download mode failed.
If none really work then should consider restoring stock rom using LG pc suite
Am I correct in saying the phone simply does not boot into download mode? You have have the phone off, hold + or - and plug USB in?
itsbighead said:
What does it say when you plug it into the computer?
QHUSB_BULK?
Click to expand...
Click to collapse
yes, say QHUSB_BULK
XPS_93 said:
I guess the better option is to try using LG flash tool to flash kdz, not sure if download mode will be booted since you mentioned download mode failed.
If none really work then should consider restoring stock rom using LG pc suite
Click to expand...
Click to collapse
does not work LG flash tool / LG PC suite" without the download mode!
drolgnir said:
Am I correct in saying the phone simply does not boot into download mode? You have have the phone off, hold + or - and plug USB in?
Click to expand...
Click to collapse
yes and yes =/
May I ask how did you brick it?
hey guys, I repaired using this method ....
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
i flash my rom using TWRP recovery
thank you xda users
asking for help
Hello!
I would like to ask you, that can you maybe help me with my LG G3 (D855) (16GB). I live in Europa, Hungary
I bought the device as used, and i would have liked to download the latest software via wifi, then on the phone restarted, and was only the TWRP on the phone, i restarted the device again, but i could entry only in the TWRP. I downloaded a ROM from the XDA, and i made a mistake, i installed the D851 software. The phone is bricked, no download mode. I tryed to unbrick, but every method need the download mode. If i put the device on the PC, the PC see only as modem. LGE AnroidNet USB modem, and the the port name LGE AnroidNet USB Serial Port Com4. If the battery is low, i see on the display, that show that need to charge, but nothing more life signal. If you can help me with some information and with files or via teamviewer, i will glad for you, and also donate. i think i have the correct TOT file, and the DLL file.
LGD855AT-00-V10k-234-30-VUK-SEP-03-2014-16G+0.tot
LGD855_20140526_LGFLASHv160.dll
I downloaded a program "BoardDiag3.99c.zip". but this program ask the BIN file, i found another program b2b.exe, that ask the TOT file at the extraction. Maybe that's is same?
As i wrote the PC sees my phone only as modem, and LGE AnroidNet USB Serial Port Com4. I dont know what is "Qualcomm HS-USB QDLoader 9008 mode", i dont see in the port menu. I hope that You, or someone can help me. i downloaded the QDLoader HS-USB Driver, but again show only the "LGE AnroidNet USB Serial Port Com4" (or now this is com41, i wanted to try a method, but need the download mode) Sorry for the bad english.
Have a nice day!
i have the same issue
AnDyZ-BR said:
hey guys, I repaired using this method ....
http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
and
http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
i flash my rom using TWRP recovery
thank you xda users
Click to expand...
Click to collapse
Please give a step by step tutorial since l cant seem to figure out how you solved the issue
Need help here,
So, i flashed .eu 9 on Mi6, all went normally, all good, i put it in the charger at night.
In the morning of today, i woke up with my phone DEAD connected in the charger (the original with original cable)
When i connect in any charger, the notification LED blinks, BUT MY PHONE DOESN'T TURN ON, IT DOESN'T BOOT! No matter what button i press
When it's not on the charger, he does nothing.
Can someone tell WTF happened and how to solve this?
I'm exactly at the same situation.
Hardbricked after Miui9 update.
Device is detected as Qualcomm HS-USB QDLoader 9008 on PC, but Miflash fails with errors:
- cannot receive hello packet
- try to reset status
Any help is appreciated!
Thanks in advance :good:
BPSoft said:
I'm exactly at the same situation.
Hardbricked after Miui9 update.
Device is detected as Qualcomm HS-USB QDLoader 9008 on PC, but Miflash fails with errors:
- cannot receive hello packet
- try to reset status
Any help is appreciated!
Thanks in advance :good:
Click to expand...
Click to collapse
Hi
try to download one of the tools from this link http://forum.gsmdevelopers.com/showthread.php?t=24421
if you keep having this error just use another version.
hac12 said:
Hi
try to download one of the tools from this link http://forum.gsmdevelopers.com/showthread.php?t=24421
if you keep having this error just use another version.
Click to expand...
Click to collapse
Thank you!
I resolved my issue disabling driver signature enforcement and reinstalling qualcomm drivers that come with Miflash.
For further instructions please follow this link:
https://www.howtogeek.com/167723/ho...so-that-you-can-install-unsigned-drivers/amp/
In my case was important to do it even if windows device manager recognize my device correctly, and miflash detected my mobile.
Clean flash via mi flash tool
MI 6 cihazımdan Tapatalk kullanılarak gönderildi
Mods please close this thread
My MI6 is officially hard bricked and there's no repair.
I'm sending it back to china
BPSoft said:
Thank you!
I resolved my issue disabling driver signature enforcement and reinstalling qualcomm drivers that come with Miflash.
For further instructions please follow this link:
https://www.howtogeek.com/167723/ho...so-that-you-can-install-unsigned-drivers/amp/
In my case was important to do it even if windows device manager recognize my device correctly, and miflash detected my mobile.
Click to expand...
Click to collapse
BPSOFT which rom you used my mi6 is in Dead brick mode and would like to recover it
XeeXa said:
BPSOFT which rom you used my mi6 is in Dead brick mode and would like to recover it
Click to expand...
Click to collapse
To use Mi Flash Tool you need to download Fastboot ROM. The Fastboot ROM extension's file are .tar, .gz*or.tgz.
But if you bootloader is still locked you need to boot in EDL mode, not fastboot mode.
More info at:
https://xiaomifirmware.com/guides-and-tips/guide-flash-miui-rom-xiaomi-mi6/
Hi Guys,
Yesterday during an official update of my oneplus 5t (using the update manager from the phone itself), the phone got bricked and i dont know why....
So after some research i found it is hard bricked ( basically i cant do nothing, power on i cant, power +volume UP/DOWN too, and even when i plug the charge cable i have neither vibrations nor LED on)
So i follow this tutorial to unbrick the phone:
https://forum.xda-developers.com/oneplus-5t/how-to/oneplus-5t-unbricking-tool-confirmation-t3733012
I could get the phone recognize by the PC by pressing UP to see the phone as QUSB-BULK and then QUALCOMM QD LOADER after driver's update.
But when i run MSMDownloadTool ( V4.0.27 dumpling 43_0.36_180613) as administrator and click on start, the process get stuck in "waiting for device"
the status of connection before click on start was "connected" and after click and some process it turn to N/A
the status of communication is "memory size....."
status of last communication is "waiting for device"
I have tried several time and always the same result..... stuck in the waiting device
does someone have an idea on how to solve this? because i really need to unbrick the phone....
thank you in advance
EDIT:
I tried another version of MsmDownloadTool (dumpling_43_O.06_171206) and this time, the downloading of cache image failed....
I dont know what to do
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
DaRk-L0rD said:
Thing are much easier with the unlocked bootloaders!
Charge your phone all night long even if you don't see any sign of life (green or red led light).
Then hold together the Volume UP button and the power button for few seconds into the fastboot mode (hold both buttons for at least 10 seconds) and let me know.
Click to expand...
Click to collapse
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
rokusho32 said:
Thanks for reply.
No i was on official oxygen OS, not rooted or custom installed and when i start to download the update, i was 80%.
Click to expand...
Click to collapse
rokusho32 said:
I tried this before and nothing happened....
then when i connect to the pc by pressing UP+ power button, the pc detected it as QUSB_BULK then i install the qualcomm driver and finally i could see the phone in the usb device.
But after MSMDownloadTool step, the process got stuck and display "memory size" as explained in the thread.
Click to expand...
Click to collapse
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
DaRk-L0rD said:
Go here:
https://forum.xda-developers.com/showpost.php?p=74504343&postcount=3
Follow the instructions for the adb drivers installation.
Once done that, let me know
Click to expand...
Click to collapse
I have installed the ADB drivers
which version of MSMDownloadTool should i use?
DaRk-L0rD said:
You were in a custom rom or kernel when you tried to update from the official channel?
Your phone was rooted? Magisk installed?
Battery percentage?
Click to expand...
Click to collapse
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
rcbjr2 said:
I know this is an old thread, but I'm hoping you have an idea. I have bricked my rooted OnePlus6. I did have Magisk installed. Bootloader was unlocked. I was able to factory reset the phone, but the bootloader was still locked (I had TWRP installed and factory reset using it). I then used Fastboot to relock the bootloader, and that's when my troubles started. I could only get into Fastboot. I found a solution on the web, installed the Qualcomm drivers (and they recognize my device, which I connected by holding down the volume up button before connecting to the USB cable), and started the OnePlus 6 (MSM) unbrick tool. However, it just sits there saying "waiting for device". I actually seem to have two entries for the device, one saying Index and one saying "1" (although I think the device is on COM3). Should it take forever? How can I get it past "Waiting for device". Thanks.
Click to expand...
Click to collapse
I have same situation.. did you resolve this problem?
piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
I contacted OnePlus and I sent them the phone and they reinstalled the operating system. I was never able to fix it myself. I even had an online session with OnePlus and they couldn't get the MSM software to recognize the phone (even though it was truly connected to my laptop). I also had an issue with my OnePlus 8T that got messed up doing something with Magisk, and OnePlus reinstalled the operating system as well. I still can't boot from the A partition though; just the B partition.
piechu11 said:
I have same situation.. did you resolve this problem?
Click to expand...
Click to collapse
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
At first, I chose WWAN-DHCP - which caused problem with connection
piechu11 said:
Okay, for anyone facing same problem as me, i found solution (working for me). Before using MSM Tool, you need to install Qualcomm USB Drivers.
During instalation you need to choose second option "ETHERNET-DHCP"!
View attachment 5511425
At first, I chose WWAN-DHCP - which caused problem with connection
Click to expand...
Click to collapse
Thank you this solved my problem exactly.
i was restoring my metro by tmobile oneplus nord n10 BE2025 model with build tag BE88CF
Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks
What have u try to do? Crossflash CN / EU Rom?
skydsler said:
What have u try to do? Crossflash CN / EU Rom?
Click to expand...
Click to collapse
It belongs to a friend of mine. I don't know what he did to it. he claims he tried to update it. Device was rooted but it shouldn't have bricked. Usually OTA update throws up an error and reboots while rooted. However in this case, it is stuck in edl with black screen. Needs QFIL file for this.
I am also in the same problem I put my EDL device but I know what I did type of my device red magic 5g global version Regarding red magic play 5g and I installed it on my device and the device became in the event of EDL and does not respond to all attempts, so what should I do and I am currently searching for unbrick red magic 5g and need it if it is available with you or another solution if it gets us out of EDL mode
There's no way out of edl mode, without an unbrick tool.
VZTech said:
There's no way out of edl mode, without an unbrick tool.
Click to expand...
Click to collapse
It's sad the phone is new and goes into the EDL case
Members await you more solutions and benefit in the near future
Thank you
rabunz1105 said:
Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks
Click to expand...
Click to collapse
Dear could you solve the problem with your phone and exit the edl mode ?
I am edl same situation and am looking for a solution..
Aboyousf said:
Dear could you solve the problem with your phone and exit the edl mode ?
I am edl same situation and am looking for a solution..
Click to expand...
Click to collapse
Hi, Same issue, no fix yet, waiting for Bricktool.
From what i have heard, nubia will be waiting a long time before releasing the tool. Anyone who is bricked, is out of luck for a long time.
is there any improvement?
rabunz1105 said:
Hello,
I have a RM 5G bricked in EDL mode. It will not exit this mode, I have tried Vol up/Down and Power button and various other key combos for fastboot and recovery. Nothing works. Device manager does show it in Qualcomm 9008 mode. Can someone please post the Qfil file for this device. Or if anyone knows a way to get it out of this mode, I would appreciate a response/fix. Thanks
Click to expand...
Click to collapse
Hello, I have the unbrick tool for RedMagic 5G and RedMagic 5G lite. You can repair your phone in edl mode. I am going to post it on the XDA forum, please follow me.
johnny886 said:
Hello, I have the unbrick tool for RedMagic 5G and RedMagic 5G lite. You can repair your phone in edl mode. I am going to post it on the XDA forum, please follow me.
Click to expand...
Click to collapse
Dear, it useless for me i contact you without real response, my phone was completely dead even its not recognized by the usb port i need a tool or a trick like jtag test port to force the device to switched on