Develop Bugs

help ... xda exec won't start after rom flashing

somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...

Which ROM did u reflashed ?

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!

Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!

Have u tried reflashing it again via bootloader mode ?

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)

Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)

niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!

U shld better get it replaced .

niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.

niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.

still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..

trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?

Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks

blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....

I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.

alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working

This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back

(SOS) Did I just brick my phone? (SOLVED)

I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help

FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
try putting your phone into the bootloader screen and reflash with another rom.

I have a friend that had this problem with his phone. In his case there was a problem with the pagepool, installing a different rom as cobbs stated was the solution for him as well.

FuzzFuzz said:
I installed Nataly Rom on my phone and since that time, my phone start to hard reset more and more often (3 times today)
Now I don't think that this has anything to do with the rom, but more with my phone.
Now, If I turn on my phone, I just get my red vodafone screen and nothing else happens.
I tried a hard reset, even with a complete format, wich now puts my phone completly bank, but still it won't pass my red vodafone screen.
Does anyone have suggestions of how to boot it up again?
please help
Click to expand...
Click to collapse
some of us have had this problem already - my advice- use tbe search function 'cmd task 29' is the answer

Hi Gort
Thanks for the wonderfull advise.
I already thought my phone was a gonner, but now I can work with it again.
For all the people who experience a phone that keeps hard resetting more often and eventually cant boot at all, here's what to do.
Procedure:
1. bring the device to bootloader.
2. Launch ActiveSync on PC
3. Go to connection settings
4. Uncheck the Allow USB Connection
5. Now, run mtty1_1_.42_538 on PC.
6. If you have run mtty1_1_.42_538, just press the button USB
7. Type CMD
8. Type task 29 and let the program do his work a bit.
9. after that, flash with the rom of your choice
here is the link to mtty1_1_.42_538
http://forum.xda-developers.com/showthread.php?t=490182&page=4
Thanks for all the help guys, most appreciated
and hopefully this thread will help others now as well
edit: Link updated, should work fine now

problem flashing
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance

brightman said:
hi fuzfuz thanks for the great advice ....the link for mtty1_1_.42_538 does not work ...can you let me know where to down load
thanks in advance
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=3451487&postcount=41

Big problem

hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase

amar ali2 said:
hi all
i have i-mate pda2. when i updated it and update completed
it stop working , give my only black screen without any words
what can i do plase
Click to expand...
Click to collapse
have you done the hard reset after flashing?maybe not ryt> if you did try, reflash again...remember hard reset of wm 2003 is different on wm 5 above..

my friend
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error

amar ali2 said:
please can you help me more
i try all ways to restart it
when the update completed the screen become black
and i can't do any thing
and i can't do any update
when i try i found connection error
Click to expand...
Click to collapse
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..

creso said:
ok..you said you finish the flasing...after that have you perform hard reset?
lets take it one by one..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=630416
read this from chef tony..if you red it b4..read it again...it will solve your problem 100%

ok
no i didn't hard restart after update
when i finished the phone is be die
plz
my email if you want to talk in messenger for best
[email protected]
[email protected]
i'm online now
thank you too much

i did
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more

amar ali2 said:
i read it
but i can't go to Bootloader Mode and don't see any words on the screen
what can i do more
Click to expand...
Click to collapse
do you have full charge of battery before you start the upgrading?

i know that problem
i also had that problem and used to hard reset into bootoptions mode. after that i started via softreset
hope it helps

[Q] Ramdump and Boot loop error > Pls help !

Hello,
Yesterday, I buy my new i8150 Galaxy Wonder and i root my phone
I install the rom Black Notes Chapter 2 with ClockworkMod.
I used V6 Supercharger with scrip manager.
After the restart everything worked normally and I just installed Viber app.
Being tired, I have not verified if the scrip was properly installed
I go to bed and getting up several hours later, my i8150 galaxy displays a black screen with
RAMDUMP mode
<null>
I will restart my phone and there's only the Samsung logo that flashes every second.
No more access to Clockwormod, the logo flashes too.
The only thing I know to do is put it into Download Mode or RAMDUMP Mode > cause: force upload
So I try flashed an original rom (W I8150XXKK1 Galaxy (EUR)) into Download Mode with Odin Multi Downloader v4.43.
Every step is going well, but when it restarts automatically at the end of the process, the Samsung logo blinking again.
I also tried to reinstall ClockworkMod with Odin Multi Downloader, but still the stage proceeds successfully, always the same problem of flashing samsung logo on startup and no access to ClockworkMod
Help me please, it's been over 5 hours I'm looking for a solution.
THANK YOU
I'm not completely new to android, I trained for over a year with my ZTE Blade with different Rom (CyanogenMod)
(My text is translated with google, my maternal language is French. I understand English, but do not know much to write)

Please post in appropiatte section
Thread moved
Sent from my GT-P1000 using Tapatalk

Oh2.. This is interesting r u sure no access to CWM ? If possible best to wipe all system folder making the phone fully wiped.
Have you tried to flash stock recovery ?
Sent from my GT-I8150 using xda premium

I tried so many different ways to repair my Galaxy W, that I totally bricked ...
Thank you anyway, I tried the after sale service, but I have hopes that I can exchange :-(

johndfl said:
I tried so many different ways to repair my Galaxy W, that I totally bricked ...
Thank you anyway, I tried the after sale service, but I have hopes that I can exchange :-(
Click to expand...
Click to collapse
Just doing independent research
From 1:10 wonder has this problem...
No kidding, but the characteristic for the phone that possible have a boot loop are always have FORCE CLOSE app and doing RESTART itself
It can fixed but only if we get stock firmware with wipe and boot loader to fix this issue
I will bring this issue to new tread

Im having this problem too. Any solutions for it.
Used perfectly for a day and 2nd day when i woke up the samsung logo keeps flashing..

Rio Saputro said:
Just doing independent research
From 1:10 wonder has this problem...
No kidding, but the characteristic for the phone that possible have a boot loop are always have FORCE CLOSE app and doing RESTART itself
It can fixed but only if we get stock firmware with wipe and boot loader to fix this issue
I will bring this issue to new tread
Click to expand...
Click to collapse
This is EXACTLY what happened yesterday..and just now I wiped everything in the phone and turned it on. It worked first, but there was a FC on the start or something..and the screen goes black. But I notice that I'm still in the custom ROM I was using (GingerICE). Then I turned it off and and went to CWM. I tried reboot system now, but I was stuck in the samsung logo. Can someone help?
I have the backup of the stock ROM. Is it safe to make the backup?

needya said:
This is EXACTLY what happened yesterday..and just now I wiped everything in the phone and turned it on. It worked first, but there was a FC on the start or something..and the screen goes black. But I notice that I'm still in the custom ROM I was using (GingerICE). Then I turned it off and and went to CWM. I tried reboot system now, but I was stuck in the samsung logo. Can someone help?
I have the backup of the stock ROM. Is it safe to make the backup?
Click to expand...
Click to collapse
if you could boot into Recovery screen, you could try:
wipe factory/system, wipe cache, advanced > wipe dalvik.
[careful] i usually format my /system if i get bootloops.
then reflash the ROM. reboot.. in my cases, those steps always worked.
edit: you should checkout the GingerICE with non OC version, the OC may work on some device and some don't, IMO if you're using your droid for daily use, i recommend using the non OC

im facing same issue too here... but i couldn't even access to download mode... tried many times, still failed... help plss...

Same thing happen to me ...today. I can get into download mode, but after flash the with odin it is still the same, boot loop on samsung logo.... help !!!

can you get to recovery mode?
follow my steps 3 post before this post

Hi..
If you can't go to recovery mode
Go to this tread..
http://forum.xda-developers.com/showthread.php?t=1506765
It not discuss about fixing but i want the user be aware of this issue
Regards

Twiq said:
can you get to recovery mode?
follow my steps 3 post before this post
Click to expand...
Click to collapse
No.. I can't.... only download mode

sgilmans said:
No.. I can't.... only download mode
Click to expand...
Click to collapse
Most probably it won't work but try to flash only the stock recovery, than give it a try(recovery mode).
Instruction and files (Scroll down to Other)
greets
THE-E

Check out Rio's thread above!!!!
You nay need to return under warranty!!
Unfortunately!!
Sent from my SGW GT-I8150 using Tapatalk!!

sgilmans said:
No.. I can't.... only download mode
Click to expand...
Click to collapse
hi, im just try bringing the idea , search the thread usb jig solution .it might help to hard reset ... .peace

[Q] KF(1st gen) Touchscreen not responding...

My KF(1st Gen) wont unlock at all.. It does not respond to any kind of touch. i have tried the hard reset and rebooted like a million times but its still the same. i even tried the factory reset but it still doesn't respond. bcoz of this i cannot use it all and im stuck at the unlock screen. it has never been dropped or "physically abused" . it even has full charge. i dont know what to do with it now. plz help me...:crying: it has been rooted but i pressed the factory reset and it became totally new and the next time i switched it on it was even asked me to register etc(the stuff that it asks when u switch it on for the first time) but i could not select anything coz of the touchscreen problems.. someone plz give me step by step guide on what to do ASAP...

eevee93 said:
My KF(1st Gen) wont unlock at all.. It does not respond to any kind of touch. i have tried the hard reset and rebooted like a million times but its still the same. i even tried the factory reset but it still doesn't respond. bcoz of this i cannot use it all and im stuck at the unlock screen. it has never been dropped or "physically abused" . it even has full charge. i dont know what to do with it now. plz help me...:crying: it has been rooted but i pressed the factory reset and it became totally new and the next time i switched it on it was even asked me to register etc(the stuff that it asks when u switch it on for the first time) but i could not select anything coz of the touchscreen problems.. someone plz give me step by step guide on what to do ASAP...
Click to expand...
Click to collapse
Try flashing the stock from the computer. Don't factory reset it. That might help you maybe.
"How could the dearth of someone you had never met affect you so?"
-Cormoran Strike

gadgetroid said:
Try flashing the stock from the computer. Don't factory reset it. That might help you maybe.
Click to expand...
Click to collapse
Thanx but can u tell me how to do that exactly?