Related
Hello,
The Freddy phone from Wiko is a new Qualcomm based mobil. His Android Marshmallow settings allow to unlock OEM bootloader.
We are wishing an easy way to root it and one click apps are not able to, for now.
A recovery would help a lot. Would you be able to port twrp or cwm, pleased ?
The phhusson boot.img say offering an easier way to port, isn't it ?
Wich method will root first the Freddy !?
[UPDATE]
Confirmed to support Treble by "ali ba".
Hello all,
I've read lots of conflicting news about the support status of Project Treble in Nokia 6 (2018),
Can anyone confirm the support or the lack of it once and for all?
Thanks.
Correct me if I'm wrong but every device launching with 8.0 has to support Treble does it not? I guess the problem lies with whether Nokia will provide the ability to unlock the bootloader. I'm not sure if it makes a difference that this is an Android One device in this respect.
Does anyone have an official firmware available for download? I have TA-1054, China version and it seems it has a custom firmware. Thank you.
leoni1980 said:
Correct me if I'm wrong but every device launching with 8.0 has to support Treble does it not? I guess the problem lies with whether Nokia will provide the ability to unlock the bootloader. I'm not sure if it makes a difference that this is an Android One device in this respect.
Click to expand...
Click to collapse
You're absolutely right, the problem is the Chinese release was on Nougat, and nobody has yet ran the Treble flag test on the international version.. maybe because not so many hands got it yet... We'll wait..
According to the test app it does support Treble, but I'm not sure whether to trust it.
Came with an update out of the box and I didn't check the version before applying it (which would have made that clearer).
ali ba said:
According to the test app it does support Treble, but I'm not sure whether to trust it.
Came with an update out of the box and I didn't check the version before applying it (which would have made that clearer).
Click to expand...
Click to collapse
Thank you very much!!! finally some useful results, I think we can trust the app, but just to make sure, could you please follow the procedure described in this page.. more specifically the terminal flag test..
https://www.xda-developers.com/project-treble-android-oreo/
Also, do you own the Chinese device or the international one?
Mo3tasm said:
I think we can trust the app
Click to expand...
Click to collapse
If we trust the app, then also A/B updates should be enabled.
Mo3tasm said:
procedure described in this page..
Click to expand...
Click to collapse
Already did the build props test. Returns true.
Mo3tasm said:
Also, do you own the Chinese device or the international one?
Click to expand...
Click to collapse
EU-version, shipped by Amazon.
Here is a screenshot from Treble Check on Nokia 6.1
(TA-1043/Europe/Android 8.1 update/Shipped with Android 8.0)
Code:
$ adb shell getprop ro.treble.enabled
true
Cleju said:
Does anyone have an official firmware available for download? I have TA-1054, China version and it seems it has a custom firmware. Thank you.
Click to expand...
Click to collapse
Hi, same here. Do you have any news? Have you managed to install unmodified Android to your TA-1054? Will appreciate any info.
Thanks.
AlexBerdnikov said:
Hi, same here. Do you have any news? Have you managed to install unmodified Android to your TA-1054? Will appreciate any info.
Thanks.
Click to expand...
Click to collapse
Nope, no news yet.
Can someone tell us the difference between all Nokia 6 2018 models please?
TA-1068
TA-1045
etc...
Is there a specific model for 'Worldwide' like Nexus/Pixel?
Is there a Europe version?
...
...
THANKS!
[Update]
Just noticed you actually did just that... Thanks.
I think this is an important topic that deserves it's own thread..
Would you care to start it?, also what models are sold in what markets?
That would be useful.
cheers.
Try to obtain the global firmware of TA-1054. I can provide you with the firmware.
I have two Nokia 6.1 devices. One is TA-1054 and the other is TA-1089. Both Global/International/Made in India version. I have the firmware files. But I doubt, you'll be able to flash them with the Stock recovery in your Chinese Variant. If you want the links, I'll provide you. And yes, Nokia 6.1 supports Treble. And I've recently flashed Android 11 GSI. Well, only issue was unlocking the boot loader to flash custom recovery. I never want to bootloader unlock any other Nokia phone anytime soon.
The TA-10xx naming determines the variant of the phone. The (4 + 64 GB) variant is TA-1089. The values change depending on the ram and storage size. Also newer models for the same phone we're released with Mediatek processors and Snapdragon for different markets. Just like Samsung does, sells the Exynos variant in Asia while selling the Snapdragon variant in US, UK, EUR, etc. Nokia also started doing this with their Nokia 5.1 and 5.3( if I recall correctly, not sure). So those phones have multiple variants. The TA-10XX naming scheme is quite similar to RM-xxx scheme followed by Nokia in the past, when Nokia was owned by Nokia and not HMD. In fact, their shift to TA-XXXX naming suggest that they belong to the family of Android/HMD owned Nokia and not the old Nokia. Even the 3310 (The beast) and 8110 4G have TA-XXXX product code instead of the RM-XXX. It's like a product code which can determine the RAM, Storage and Chipset as well as Region of the device.
So to flash Android R, TWRP or TWRP based custom recovery is required. Then flash any Android 10 Custom ROM with Treble support. Also flash dm no verify.zip with the ROM. Reboot to set up device. Don't add any Google account and password, etc. Then again boot into TWRP, changed to Image mode from zip mode in Install. Flash the system.img from Android 11 GSI.
Then reboot.
Follow the guidelines to unlock your bootloader
https://www.techmesto.com/guide-unlock-bootloader-nokia-android-phones/
---------- Post added at 10:55 PM ---------- Previous post was at 10:31 PM ----------
If your device came with Pie (9.0) preinstalled. In India, few devices came.
https://developer.android.com/topic/generic-system-image/releases
If device came installed with Oreo. Use ERFAN GSI for Android R (11)
https://mirrors.lolinet.com/firmware/gsi/Pixel/Pixel-AB-R-20200222-ErfanGSI.img-0514.7z
For stock firmware both Global and Regional
https://fih-firmware.hikaricalyx.com/hmd_en.html
dm-no-verify.zip
https://androidfilehost.com/?fid=1899786940962604362
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
Click to expand...
Click to collapse
What's your phone's specifications?
Lanreallenjay said:
What's your phone's specifications?
Click to expand...
Click to collapse
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
Ask for help here
https://t.me/phhtreble/283195 <---
Read before any question ^^^
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
Click to expand...
Click to collapse
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
rupert3k said:
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
Click to expand...
Click to collapse
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
rupert3k said:
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
Click to expand...
Click to collapse
Have you tried formatting data with TWRP (to the part when it asks you to write "yes") then flash no-verity?
You should at least be able to flash TWRP. If you can't, just download the proper USB drivers for your device, it might be the culprit.
Cheers!
itShouldWork said:
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
Click to expand...
Click to collapse
Phh just hinted it's likely Pie vendor causing panics:
"First you need to flash stock rom. Then install magisk and then this gsi.
Though please note that on Pie vendor, S9 kernel panics and reboot every few minutes, so it is highly unusable."
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
I have tried Android 10 GSI , using latest Q update
ZoiraP said:
I have tried Android 10 GSI , using latest Q update
Click to expand...
Click to collapse
Is it usable? any random reboots/ annoying instability?
itShouldWork said:
Is it usable? any random reboots/ annoying instability?
Click to expand...
Click to collapse
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
ZoiraP said:
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
Click to expand...
Click to collapse
Camera quality might be fixed with Google cam, if you find a good port.
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
rupert3k said:
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
Click to expand...
Click to collapse
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
A\B
itShouldWork said:
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
Click to expand...
Click to collapse
No real experience but A\B devices have two slots ie double the partitions (OnePlus has 67) .
This allows updates to be installed while running from slot A while the updated system is copied to B.
Apparently Q requires A\B so now we're on Q may as well try that next time we're curious
Phh just released:
AOSP 10.0 v208
Fix suspend/dt2w for Samsung Q vendor
Fix backlight for Samsung Q vendor
Samsung Q's fine, love gestures but the bloat is killing me.
You can tell Q's going to be so much leaner without bixby & friends.
Glad we installed it to get compatible but I think now we probably stand a better chance with 10 GSI's, hopefully LOS17 & Pixel Experience get updated again soon.
Wondering whether to following the rooting instructions yet?
Phh did say "flash stock rom then magisk and then gsi"
https://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
ZoiraP's wondering why we sooo slow lol!
Wow this looks good: https://forum.xda-developers.com/ga...-s9--s9-cross-device-development/rom-t4020939
Dear,
I need to have TWRP for rooting my OP9Pro but it is of course not available for the OP9Pro since it is brand new. Since i am experienced with flashing TWRP on OnePlus phones i already now that TWRP officialy doesn't support the latest phones of OnePlus so i know that the TWRP's used for that are from Mauronofrio and others. But does anyone know how long it would take till someone has developed a reliable version of TWRP for it and maybe also how long it would take till MSMDownloadtool become available for us?
Regards,
Kuno
It will become available when it does. No one knows when. One day you may see it. Or not. Flip a coin and good luck!
You also do not need TWRP for root.
There is already this thread asking for TWRP since the start of this sub-forum : https://forum.xda-developers.com/t/how-come-we-dont-have-root-and-twrp-yet.4252335/
For rooting without TWRP, here is an explanation : https://forum.xda-developers.com/t/...gisked-boot-root.4252373/page-4#post-84747985
Unlocking the bootloader is done by rebooting in fastboot mode and fastboot oem unlock
Root OnePlus 9/ 9 Pro/ 9R using Magisk [No TWRP Required]
In this article, I will show you how to Root OnePlus 9 Pro using Magisk and without TWRP recovery. OnePlus 9 Pro recently launched this beast smartphone,
magiskapp.com
Cardinal rule of XDA, Do Not Ask For ETAs
If you can develope it faster, I'm sure everyone would agree that you are more than welcome too.
avid_droid said:
And here you go...
[DEV]How to compile TWRP touch recovery
All of TWRP 3.x source is public. You can compile it on your own. This guide isn't going to be a step-by-step, word-for-word type of guide. If you're not familiar with basic Linux commands and/or building in AOSP then you probably won't be...
forum.xda-developers.com
Click to expand...
Click to collapse
I don't think this is applicable because the recovery is a part of the boot image and this guide is for creating a standalone recovery image I think since android O (someone can correct me if I'm wrong on which android version introduced this)
GreaterLesser said:
I don't think this is applicable because the recovery is a part of the boot image and this guide is for creating a standalone recovery image I think since android O (someone can correct me if I'm wrong on which android version introduced this)
Click to expand...
Click to collapse
Well, this guide still covers the basics of setting up a tree and building. You'll need that regardless if your device has a recovery partition or not.
I want to install a custom ROM on my Nokia G20 once the official support ends on May 2024.
I visited this page and searched the supported list but couldn't find Nokia G20.
Any custom ROM available for download that supports the G20 ?
I don't want to download a ROM from a random source. My main focus is security which is why I don't want to continue using this device after May 2024.
Sadly not yet
Spuffyffet said:
Sadly not yet
Click to expand...
Click to collapse
I wrote "not yet". Does that mean there is hope ? Specifically which ROM can I expect to support the G20 in the near future ? LineageOS ?
Also someone told me something about the bootloader. I don't know much about Android. He told me that Nokia does not allow installation of custom ROMs. Is this true ? If yes then how am I supposed to install a custom ROM even if a project starts supporting the G20 ?
hifi1 said:
I wrote "not yet". Does that mean there is hope ? Specifically which ROM can I expect to support the G20 in the near future ? LineageOS ?
Also someone told me something about the bootloader. I don't know much about Android. He told me that Nokia does not allow installation of custom ROMs. Is this true ? If yes then how am I supposed to install a custom ROM even if a project starts supporting the G20 ?
Click to expand...
Click to collapse
Ah it all depends brother if someone builds a ROM for the device, but if nobody does, there's just no hope.
and it's not true you can still install custom ROMs on Nokia devices, You can surely unlock it's bootloader and you need to install a custom recovery in order to install a ROM. And about how you'd know, there's just no way. like just keep checking the Xda forums of the Device Nokia G20
hifi1 said:
I wrote "not yet". Does that mean there is hope ? Specifically which ROM can I expect to support the G20 in the near future ? LineageOS ?
Also someone told me something about the bootloader. I don't know much about Android. He told me that Nokia does not allow installation of custom ROMs. Is this true ? If yes then how am I supposed to install a custom ROM even if a project starts supporting the G20 ?
Click to expand...
Click to collapse
Hello Friends~! I bought one of these phones specifically to root and build a rom for, since I saw it was lacking any options. I have to finish a project I am working on, so give me a couple weeks max and I should have some stuff up for y'all.
hifi1 said:
I wrote "not yet". Does that mean there is hope ? Specifically which ROM can I expect to support the G20 in the near future ? LineageOS ?
Also someone told me something about the bootloader. I don't know much about Android. He told me that Nokia does not allow installation of custom ROMs. Is this true ? If yes then how am I supposed to install a custom ROM even if a project starts supporting the G20 ?
Click to expand...
Click to collapse
As far as your other question, I like to do three builds, one is a Recovery Rom that is Stock, the second is a Stock Rom that is Rooted, the third one being Lineage with Root. I traditionally put Gapps on there, the mini. I can do images without Gapps if requested, etc.
hifi1 said:
I want to install a custom ROM on my Nokia G20 once the official support ends on May 2024.
I visited this page and searched the supported list but couldn't find Nokia G20.
Any custom ROM available for download that supports the G20 ?
I don't want to download a ROM from a random source. My main focus is security which is why I don't want to continue using this device after May 2024.
Click to expand...
Click to collapse
Hi,
With an unlocked bootloader you can root your device. Then, you can extract vendor files and build a rom from scratch.
For those people that have bootloader unlocked, please, upload vendor files to a git repo.