Hi, question: i have a Note 10+ with all updates and updated via adb to Android 10 but my fingerprint scanner is still really awful. I have seen all yt video, seen all tuto on how to set the fingerprint but nothing!
Still awful, especially when finger is a bit wet. Is there a solution or is it better change the phone?
Maybe it is the way you registerd your fingerprints, my fingerprint sensor is accurate all the time
Are you using a screen protector? Mine sucks too. I have a glass one with the thin area in the glad over the sensor and I have used privacy film and it's ehh. It works perfect with nothing on it. Try turning the touch sensitivity up in settings and maybe re-register the print again.
Sent from my SM-N975U1 using Tapatalk
(The touch sensibility have nothing to do with the fingerprint sensor though.)
Maybe they finger print again but dont press to hard
Upside down
denzel09 said:
Hi, question: i have a Note 10+ with all updates and updated via adb to Android 10 but my fingerprint scanner is still really awful. I have seen all yt video, seen all tuto on how to set the fingerprint but nothing!
Still awful, especially when finger is a bit wet. Is there a solution or is it better change the phone?
Click to expand...
Click to collapse
You probably have, but try registering your fingers upside down and side ways.. and register loads of times with the same finger you mainly use, im sure you know all this though
It's awful, specially compared to the OnePlus6T
FCORivers said:
It's awful, specially compared to the OnePlus6T
Click to expand...
Click to collapse
, no, it is not, mine as many others work just fine, the fingerprint sensor for whatever reason doesn't work the same for all, odd, but not a so uncommon issue, and this happens among all brands
I partially blame the size of the sensor as well as the way they guide users through the enrollment process. The standard android fingerprint enrollment process, as i've experienced on my HTC U11 and Razer Phone 2, prompts for more finger edge samples. I actually went through the process on the Note as the software prompts and had mixed results. I then just decided to hit the sensor randomly with some overlap to give it a better overall picture of my finger as opposed to a bunch of samples of the same spot and then a few variants.
If you shine a flashlight at the screen you'll see the sensor size. It is a short rectangle that doesn't seem to cover the area that the fingerprint icon covers. I have an amFilm whitestone-style screen protector and while there is a slight difference, the stock experience was also not that great. I would recommend you try to figure out how you ACTUALLY use the fingerprint unlock. I noticed that while i'm enrolling i'm focusing on pushing with my fingers dead-on, in practice i actually use just the upper right corner of my thumb (if you're looking at the fingernail top-down). When I realized that I trained it with that in mind and it did perform better.
There was mention of the ones in the One Plus devices, which are actually different in that they are optical. Because they light up and read optically they have a more controlled environment than what the ultrasonic sensor on the Samsung phones. I can see someone with a deeper fingerprint patten be able to get better results vs someone with a very faint fingerprint. On oneplus devices though it would just be a different picture, but i'm thinking on an ultrasonic sensor there might not be enough peak and valley information to pass the threshold. Maybe samsung can make the pattern require less data points to match to unlock, but that would also mean it is less secure.
Bottom line is that while the tech has the potential to be more secure than optical under glass, it still has a little ways to go but it is serviceable once you get to it. I don't have big hands so i have to hold the phone in a very specific way to get a good grip on it. Once i figured that out, training the sensor again did yield better results.
I have the same problem. In sorry you haven't received a resolution, especially from Samsung who manufactured the Galaxy Note 10 Plus. I'm believe they were aware that it did not work with many 3rd party cases with protected screen covers. No matter how you register with screen off or on, the reader is intermittent and doesn't work with the cover. I hope you get the resolution as it will solve my issue as well.
The fingerprint registration process seems very glitchy too but after having experienced an awful 40% success rate with waking the phone using my fingerprint I deleted all the stored prints and started again. The secret is in storing decent prints so keep doing this until the phone unlocks with a 90%+ success rate like mine does now.
Related
Spent quite sometime with the S10+, well ..with a live demo unit.
Some personal initial impressions:
- Though secure , ultrasonic fp scanner is slow, slower than the optical scanner on the OnePlus 6T- something that is already slower than a conventional capacitive scanner. Also, once registered, it was a hit or a miss everytime I tried unlocking as I was not able to memorize the suitable spot @ FP scanner when I wasn't careful enough .Samsung is likely to make the experience better with future updates and I hope my muscle memory will improve in future. Also, wet finger and the scanner are against each other- doesn't work
(with a quick OTA [email protected] build no G975FXXU1ASBA, the FP recognition is now improved)
- No notification LED anymore.
- Bixby sucks like before.Now with an addition like Bixby routine that mimics Google assistant routine.
- Slipperly back.(- prism white, don't know about the other vatiants yet). Felt like it slips more than my Note 9 on the same surface.(just felt when I tried alongside the Note9, no accurate testing).
- Since bezels are thinner than ever, it felt like I was blocking the border contents accidentally no matter how I was holding.
- Feels lighter, way lighter than the Note 9 and also shorter, narrower.
- Primary shooter has two zoom modes compared to one in the Note 9.
- Bezel-less and a very premium design overall.
- Bigger battery ,yet smaller form factor. Yet to understand the endurance though.
PS: I see negatives in a gadget fast,way faster than the positives. As such, the +ve points would easily overpower the -ve points on the S10's, especially the +model.
Virgo_Guy said:
- Though secure , ultrasonic fp scanner is slow, slower than the optical scanner on the OnePlus 6T- something that is already slower than a conventional capacitive scanner. Also, once registered, it was a hit or a miss everytime I tried unlocking as I was not able to memorize the suitable spot @ FP scanner when I wasn't careful enough .Samsung is likely to make the experience better with future updates and I hope my muscle memory will improve in future. Also, wet finger and the scanner are against each other- doesn't work.
Click to expand...
Click to collapse
I assume there would be a setting to show on the screen where the sensor is located to guide you, either on the AOD or lock screen. I'm a little upset about the wet finger and scanner not working. I thought that was a perk of having this type of sensor...
Virgo_Guy said:
- No notication LED anymore.
Click to expand...
Click to collapse
Have you dug around in the settings to see if there is a setting to use part of the screen as the "notification LED"? I've heard rumors that the camera bezel is used in place of the notification LED.
Outbreak444 said:
I assume there would be a setting to show on the screen where the sensor is located to guide you, either on the AOD or lock screen. I'm a little upset about the wet finger and scanner not working. I thought that was a perk of having this type of sensor...
Have you dug around in the settings to see if there is a setting to use part of the screen as the "notification LED"? I've heard rumors that the camera bezel is used in place of the notification LED.
Click to expand...
Click to collapse
Aside from the fp registration process , I was not greeted with any other guidance once the screen was locked.Unfortunately, the demo I spent time on, wasn't showing that in default settings and I did not dig further into the settings to find out. If not there, I assume Retail units will have it.
Again.. it's just that I couldn't find an LED on the status bar. Will update more about how notification is taken care of using AOD(if at all it's different from existing ones and paid special attention to, for notifications) when I play with it again.
Virgo_Guy said:
Aside from the fp registration process , I was not greeted with any other guidance once the screen was locked.Unfortunately, the demo I spent time on, wasn't showing that in default settings and I did not dig further into the settings to find out. If not there, I assume Retail units will have it.
Again.. it's just that I couldn't find an LED on the status bar. Will update more about how notification is taken care of using AOD(if at all it's different from existing ones and paid special attention to, for notifications) when I play with it again.
Click to expand...
Click to collapse
I also read somewhere that the camera bezels were "Samsung elegant solution for notification lights". Please, share and thanks.
Is it me or does the display looks not uniform with a pink hue!
Virgo_Guy said:
Also, wet finger and the scanner are against each other- doesn't work.
Click to expand...
Click to collapse
This doesn't make sense. Are you sure the device wasn't faulty? Also when your turn on the device the lockscreen has an indicator of where to place your finger to unlock the device on all on the videos I've seen. Something must be wrong with the device you played with.
Mosman12 said:
Is it me or does the display looks not uniform with a pink hue!
Click to expand...
Click to collapse
Didn't notice anything of the sort on retail units. Of course, defects can happen to any product.
Intratech said:
This doesn't make sense. Are you sure the device wasn't faulty? Also when your turn on the device the lockscreen has an indicator of where to place your finger to unlock the device on all on the videos I've seen. Something must be wrong with the device you played with.
Click to expand...
Click to collapse
A lot of the people reviewing the phone said they had the same issues with the FP reader.
I see many YouTubers reviews in regards to the FP reader, I'll wait and test myself.
Same was said with the optical that they are slow and Don't function, now I have tested and owned the Huawei mate 20 pro that was just fine, I did not have the issues YouTubers were crying on about.
I now have the Vivo Nex S and again no issues it unlocks first time, I would put it in the say 98% odd occasion it might be slow or not respond as well. I must be the fortunate one I guess lol
What I am saying is don't buy Into the beeeep, sometimes they are full of beeeep, not saying it will be perfect, but I can say from my optical use I haven't been annoyed with it. It well works 98% of the time.
Duncan1982 said:
I see many YouTubers reviews in regards to the FP reader, I'll wait and test myself.
Same was said with the optical that they are slow and Don't function, now I have tested and owned the Huawei mate 20 pro that was just fine, I did not have the issues YouTubers were crying on about.
I now have the Vivo Nex S and again no issues it unlocks first time, I would put it in the say 98% odd occasion it might be slow or not respond as well. I must be the fortunate one I guess lol
What I am saying is don't buy Into the beeeep, sometimes they are full of beeeep, not saying it will be perfect, but I can say from my optical use I haven't been annoyed with it. It well works 98% of the time.
Click to expand...
Click to collapse
Why did you flip your mate 20 pro?
Mosman12 said:
Why did you flip your mate 20 pro?
Click to expand...
Click to collapse
Well I had to buy the Asus R.O.G .....
Did you try to record any hdr video? And they had improved the AR emoji? First were crappy
tiho5 said:
I also read somewhere that the camera bezels were "Samsung elegant solution for notification lights". Please, share and thanks.
Click to expand...
Click to collapse
Yeah, I did read a few similar articles and to find out, I checked 2 more units today . NO, I did not see any such option . Counting from settings in camera to notification to developer options , I just could not find any such thing.
Mosman12 said:
Is it me or does the display looks not uniform with a pink hue!
Click to expand...
Click to collapse
That's screen burn. I did not see that in few other units. Rest be assured that the "pink hue" that plagued the S6 series is not the case here :good:
Intratech said:
This doesn't make sense. Are you sure the device wasn't faulty? Also when your turn on the device the lockscreen has an indicator of where to place your finger to unlock the device on all on the videos I've seen. Something must be wrong with the device you played with.
Click to expand...
Click to collapse
CC: @Outbreak444
1. Definitely it was not faulty. I had to pretty much forget the fp scanner when finger was totally wet. When it was slightly wet, it was hit or a miss situation. I tested it with another unit today only to have the same result. Then tested with one more unit - nothing changed.
2. When you register fp, it shows , once the screen goes off ,it doesn't anymore. You will have to wake the screen first , only then the "indicator" shows, not when you directly would want to unlock using the fp from the lockscreen when it's off. Dug further into settings and AOD to look for any possible toggle,found none. With AOD, it indeed showed up notification and stuff but not the fp guide/indication. Toggles like lift to wake and the new "double tap to wake" (new for a samsung without 3rd party launcher) are there .
Going forward, I spoke to a Samsung senior level trainer ( is known to me) (& for God's sake I did not want to talk to customer care execs) who later told me "the phones you have tested are with pre-release software and some are with Retail mode on in them without having the actual Retail software meant for customers. You will see "all that" once it is officially released in the market(i.e. 8 March).
I will have a full retail unit in March 6th for sure. Till then, let's see what more info we get. :good:
takato23 said:
Did you try to record any hdr video? And they had improved the AR emoji? First were crappy
Click to expand...
Click to collapse
AR emoijis are customizable: Skin color, hair, clothes, facial features, name and age. They seem to have idle actions such as dancing. Keep in mind that I didn't try AR in previous phones can't do a direct comparison.
Also, you can create AR emoji masks (where your head is replaced). The camera supports HDR10+ & HEVC (one or the other!).
Ace42 said:
AR emoijis are customizable: Skin color, hair, clothes, facial features, name and age. They seem to have idle actions such as dancing. Keep in mind that I didn't try AR in previous phones can't do a direct comparison.
Also, you can create AR emoji masks (where your head is replaced). The camera supports HDR10+ & HEVC (one or the other!).
Click to expand...
Click to collapse
Nice! They are more like memoji from apple?
takato23 said:
Nice! They are more like memoji from apple?
Click to expand...
Click to collapse
In terms of looks they're closer to Microsoft's avatars, since they're deformed humans instead of animals or emojis. Facial tracking is still there, so you can blink or whatever. Dunno if it'll gain traction with content creators, but I can see myself using masks.
Just played with a S10 in store and there is an indicator on AOD for where to place your finger for the fingerprint sensor. Dunno what software OPs unit is running but it doesn't seem to be the latest.
Intratech said:
Just played with a S10 in store and there is an indicator on AOD for where to place your finger for the fingerprint sensor. Dunno what software OPs unit is running but it doesn't seem to be the latest.
Click to expand...
Click to collapse
Yes I've noticed that too in a YT video. But I did not see that in AOD on, with the units I played with. (attached pic).
Unless tapped on the screen, that area was not visible. That experience is similar to this video: timing at 04.00
Odd
From TK Bay's video. Gif showing the fingerprint placement hint when the screen is off without AOD.
my Finger Print sensor is not so accurate. I can finally says that is the same model and sw from the Galaxy S10 .
Disappointed about that
I can't complain, I'm having better luck with it than what was on the Note 9, even if I do wish the 10+ still had iris scan.
Belimawr said:
...I do wish the 10+ still had iris scan.
Click to expand...
Click to collapse
This. For a device to be their top tier monster, I'm surprised they didn't put something better than just basic face recognition in it.
I'm happy with it! it sucked on the first day but then I got that update that said it would improve fingerprint stuff and it actually did! it made it more sensitive and fast. it barely ever fails now.
Zero problems.
Having written that looking at this forum I must be unique in that I am a satisfied customer with the Note 10+. Nothing better or even close.
With respect some posters here really do need to look outside the box at what we HAVE here! Latest moans seem to be around 60hz. Last year it was something else the year before something else too.
What ARE our expectations of a smart phone? Where does this quest for bigger, smaller, fatter, slimmer etc end?
Ryland Johnson said:
Zero problems.
Having written that looking at this forum I must be unique in that I am a satisfied customer with the Note 10+. Nothing better or even close.
With respect some posters here really do need to look outside the box at what we HAVE here! Latest moans seem to be around 60hz. Last year it was something else the year before something else too.
What ARE our expectations of a smart phone? Where does this quest for bigger, smaller, fatter, slimmer etc end?
Click to expand...
Click to collapse
No device is perfect. I don't have any issues with criticisms, there is certainly nothing wrong with wanting more for the price being paid. Just because one person is happy doesn't negate folks that see negatives anymore than it affect someone that thinks it is perfect. That's the wonder of not being in an echo chamber.
I'll certainly defend design choices I see as beneficial, but I won't discredit someone's opinion of not including a higher hz screen for instance. You mean you wouldn't like that being a part of the device? That's just one example.
I just get an air of "don't complain because we have perfection", that kind of defeats a large purpose of these communities.
Maybe someone's gripe can be solved through another solution they knew nothing about. Maybe someone's gripes will help someone else make a purchase decision that better serves their taste.
Maybe it will help someone identify an actual defect and get it repaired..
I have zero issues with my FP reader. I know it's supposed to be the same sensor as the S10+, but I feel the one on the N10+ is more sensitive than the one on my wife's S10+.
I only have issues when I miss it, because I don't turn on the screen first and have to guess where it is. But I'm actually getting better about that too.
I'm excited to install my Whitestone Dome tomorrow when it arrived and see if it affects the FP sensor negatively. Online reviews say it doesn't cause any issues.
Mr. Orange 645 said:
I have zero issues with my FP reader. I know it's supposed to be the same sensor as the S10+, but I feel the one on the N10+ is more sensitive than the one on my wife's S10+.
I only have issues when I miss it, because I don't turn on the screen first and have to guess where it is. But I'm actually getting better about that too.
I'm excited to install my Whitestone Dome tomorrow when it arrived and see if it affects the FP sensor negatively. Online reviews say it doesn't cause any issues.
Click to expand...
Click to collapse
follow the instruction to the letter and it didn't affect my fingerprint scanner in the slightest, works identical to the factory fit protector for me.
Still not perfect but much better then my s10 plus. Don't like it as much as say pixel 3 or note 9 scanner on the back but it is getting better!
Whoa, I just took the latest OTA update and now I get 'The fingerprint sensor is not responding, try again later' !!!
Code:
08-25 17:17:00.416 17936 17936 D FpstFingerprintEntry: =====onCreate()
08-25 17:17:00.419 1306 1968 V FingerprintService: request(6) called from pid=17936, param = 0, id = 0
08-25 17:17:00.419 1113 1113 I [email protected]: request()
08-25 17:17:00.419 1306 1968 W FingerprintService: semGetSensorStatus FP_FINISH (0ms) RESULT: -1
08-25 17:17:00.419 17936 17936 E FpstFingerprintEntry: onCreate isHardwareDetected = true, semGetSensorStatus = 100042
Belimawr said:
follow the instruction to the letter and it didn't affect my fingerprint scanner in the slightest, works identical to the factory fit protector for me.
Click to expand...
Click to collapse
Great news! Thank you!
I feel like the fp scanner learns/or gets better as you use it. It was the same case with my s10. Never had any issues with it except the first couple of times. After that even with the screen off no issues. I know people that don't use it and they have "issues" with it.
Chekz said:
I feel like the fp scanner learns/or gets better as you use it. It was the same case with my s10. Never had any issues with it except the first couple of times. After that even with the screen off no issues. I know people that don't use it and they have "issues" with it.
Click to expand...
Click to collapse
That seems like an issue to me if that is the case.
Works for me
Belimawr said:
I can't complain, I'm having better luck with it than what was on the Note 9, even if I do wish the 10+ still had iris scan.
Click to expand...
Click to collapse
I'm having zero issues with the fingerprint scanner as well. I have thumb and forefinger on both hands and let me tell you.....I have missed a front fingerprint scanner in the last two Notes.
I do make a point to rotate my fingers when I do the set up, I wonder if those having issues didn't do that.
When using good lock lockscreen, the fingerprint is worse than without it.
I have a Whitestone dome screen protector installed (perfect install too, I'm impressed with myself lol), and I noticed the fingerprint sensor is definitely hit or miss for me. Even with the sensitivity boosted it seems to have problems at times. I also tend to have dry hands which from my understanding causes problems with the reader.
I'm not going to blame the phone because I never even touched the glass before the protector went on, so I will blame it on the dome.
I would be interested in seeing if others with this protector are having issues.
wolfgart said:
my Finger Print sensor is not so accurate. I can finally says that is the same model and sw from the Galaxy S10 .
Disappointed about that
Click to expand...
Click to collapse
I'm not having the best of luck either. I haven't got the Aug firmware update yet & that might help. I'm going to add my same finger a couple more times & see if that helps. I'm using the insecure face unlock as I miss that iris scanner so, so much.
Sent from my SM-N975U using Tapatalk
I'm coming from the Note8 and the rear fingerprint reader is instant. The Note 10+ is a hit and miss. There are times where it registers instantaneously and there are times it takes a few times to register. I haven't downloaded the Aug firmware. Hopefully that will fix the hit and miss readings.
jtambis6 said:
I'm coming from the Note8 and the rear fingerprint reader is instant. The Note 10+ is a hit and miss. There are times where it registers instantaneously and there are times it takes a few times to register. I haven't downloaded the Aug firmware. Hopefully that will fix the hit and miss readings.
Click to expand...
Click to collapse
I have the August firmware and I wouldn't even call it hit or miss ...... It is truly terrible
Phone is otherwise great but the fp reader is practically useless
It's great for me. August patch. Once I learned what it likes, by testing checking finger prints, it doesn't miss. I also have the stock screen protector on and increased the screen sensitivity.
Sent from my SM-N975U using Tapatalk
Everytime I see videos about the Note 10+ under screen fingerprint sensor, usually YouTube. They quickly go to the sensor, just briefly touch it and their phone unlocks. I have to press screen firmly, hold it there for about 1/2 or a full second, then it unlocks. What am I doing wrong
I see there same results
Hard to say, mine works super fast, but in fact I do not use any type of unlocking security! I never leave my phone unattended, and I have no sensitive content stored in it, so…
Mine works great even with Whitestone screen protector. What I do when registering, I use left thumb, then right. I do this until 1st print is registered and continue the same for 2and 3rd and 4th
Sent from my SM-N975U using Tapatalk
I find it to be pretty poor compared to normal fingerprint sensors but does the job for the most part. It was definitely better before I installed a Whitestone screen protector, comparable to the optical unit on the ROG Phone 2.
I find a quick tap does sometimes work but most often I get a message to say press harder or something similar.
Coming from OnePlus 7 Pro..this FP sensor is just horrible...I can't even get it to unlock 50% of time
2 things: you can change the screen sensitivity and that may help register with less pressure or time spent pressing. Also, I would remove the troublesome registered print and register again. Make sure you aren't pressing super hard during registration, and get every angle and position of that finger possible.
Doing this, I've had no issues with using the reader.
Sent from my SM-N976U using Tapatalk
J48BLE said:
Everytime I see videos about the Note 10+ under screen fingerprint sensor, usually YouTube. They quickly go to the sensor, just briefly touch it and their phone unlocks. I have to press screen firmly, hold it there for about 1/2 or a full second, then it unlocks. What am I doing wrong
Click to expand...
Click to collapse
I still struggle sometimes with the fingerprint sensor not being always dependable 'at will'. It's a great phone, but this problem is very frustrating to me, too much of a contrast to this phone's all other qualities.
Now in the Winter the problem gets worse, dry air=dry skin, at home I can use some hand moisturizer(it helps), but I don't think that's what the sensor designers hoped for to improve sensor's reliability.
I'm on it since S10 which I returned for the very same reason shortly after purchasing it about a year ago and replaced it with S10e, a phone that was perfect and free from my frustrations. Yet I swapped the S10e for N10+ just to have a bigger screen for reading my ebooks on it. Somehow I convinced myself that the sensor will have totally new hardware. Well, they did improve the software, the sensor in N10 is the same, more accurate in my opinion though, but it still lags behind expectations for a flagship, or rather, as I call it referring to its price: a battleship.
So, my new resolve now is to aim for S11(it all depends on Samsung's generosity with the N10 swap), not much”leaks” around about the S11 specs but I think they have a brand new and bigger, ultrasonic sensor in the works.
butchieboy said:
Mine works great even with Whitestone screen protector. What I do when registering, I use left thumb, then right. I do this until 1st print is registered and continue the same for 2and 3rd and 4th
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I removed my existing fingerprint registrations and did it as you suggested, 4 times slowly without to much pressure.
Now my fingerprint function is working flawlessly without any issues.
Hi everyone!
I'm a owner of a new Galaxy S20! Nice, small design, everything is working fine - execpt the Fingerprint sensor...
It is very bad, i scanned the same finger 3 times (as three single fingerprints) but it is still very bad in recognizing my FP! And the speed of unlocking isnt as good too...
Coming from an OnePlus 7t, i am defenitly shocked
For that price as a flagship i expect a bit more...
Maybe some of you can help, or have tips for me for "tuning" my FP sensor!
Thx a lot!
Not really. Making sure your hands are clean helps a lot - it's reading the raised section of your fingerprint as they press against the glass, if your hands are dirty the crevices get full and make it harder to see them.
To be fair, the first gen optical sensor on the 6T and the slightly improved one on the 7T 7 Pro are literally just cameras that compare photos to ones in memory. They're fast because they aren't super accurate. The ultrasonic ones on Samsung devices are more accurate but slow and finnicky. Honestly, I preferred the old style ones on the back, they were better in both regards.
It's slow and usually fails a couple of times on me as well. I switched to using face recognition and I'm very happy with it... I was surprised at how quick it is.
I have scanned my finger twice as well as added face unlock, and works pretty much always
Turn off Optimize Battery Usage for com.samsung.android.biometrics.app in Settings.
I have really dry hands (fingers). Usually takes me a few tries to unlock. And yes I've done all the tricks to try and speed things up.
Taking off the screen protector helps a lot, but ya its as bad as the s10 one.
Scanned my finger 9x's today before it decided to say "oh yeah, I know you." Coming from a OP7 PRO 5G, this is absolute garbage! Going to disable it and try the face recognition.
I am having similar issues. A couple of things that helped:
- disabled battery optimization for com.samsung.android.biometrics.app
- re-enrolled the finger (once) while holding it longer and at a different angles
I am also trying to train myself to touch and wait patiently until it unlocks.
Face recognition is not great imo...
If I disable biometrics app battery optimization and remove fingerprint animation it seems to be a little snappier. I came from 7pro and op has a larger sensor but I got used to s20+ and don't have any issues as long as I place my thumb on the right spot lol.
I left the stock screen protector it came with and I have no issues at all. I see a lot of people complaining that it doesn't work or that it sucks, but i personally love it. NEVER going to use face recognition or whatever else is there.
Same problem
Multiple presses to get in on 2 fingers. Phone keeps telling me to press harder!?!?! The phone will go back to Korea if press any harder.
I made this thead poll as a guideline so we can see how many people are/aren't having issues with their FP scanners. If you are having issues what are the main issues?
I really don't have an issue with it and if Google's response to it's slow because of extra security then I'll take security over nanno seconds delay in unlocking my phone. Now that I have removed all the fancy useless animations, like I do on my phones it actually just seems as fast if not faster then on my S20. Yes when I 1st got my pixel 6 pro it did seem slower especially when like myself you have come from having Samsung flagship devices, I think a lot of the problems come down to muscle memory and now I've had my device for a couple of weeks I hit it bang on 9 times out of 10 just like my on my previous devices. It does what it's meant to do and that's secure your precious data on your phone. I wish I had a 3rd device so I could do a comparison video to demonstrate my unlocking experience.
I had a Galaxy Note 20 Ultra. Switched to Pixel 6 Pro and the fingerprint sensor on the Pixel, for me, is much better!
I set them up the same, but I like that the light shines through my thumb, it makes it more obvious that I have it right. For me the Pixel is better, much better.
Works as well as my OnePlus finger print reader, just fractions of a second slower.
Not had to change any setting such as animations for it to be reliable and just work.
Been fine for me, I'm guessing those having issues have small fingers.............I'd still prefer one on the back
works alright for me, but definitely not as instant unlock as I had on the 4XL. sometimes though I need to hold my finger on the screen for a second and a half to unlock, but most of the time it's quicker
You needed another option between 50% and 95%. Maybe "most of the time but not quite 95%" None of the three options fit my experience, sorry. Oh yeah, one more. "I use smart unlock so it doesn't bother me much." lol
No real issue. It's better than the LG G7 fpr I'm coming from which would consistently stop working for days.
Works better than the S20 Ultra and the S21 Ultra ultrasonic fingerprint sensor that I've used in the past.
I had a Note 20 Ultra as well and I didn't like the FP scanner on it too much but the S21 Ultra's was accurate and fast. The Pixels is super accurate, just a tad slower but it doesn't bother me at all since it works just about 100 percent of the time.
Works fine for my usage...
I've been having a good bit of issues with the fingerprint scanner and they aren't related to speed., about half of the time the Pixel 6 Pro can't read my finger print at all. I'm coming from Oneplus 7 Pro that feels light years ahead of this fingerprint scanner. I've tried all the tips and tricks people have been recommending, which has helped, but it still says can't read fingerprint 50% of the time. It's very frustrating.
bbacon said:
I've been having a good bit of issues with the fingerprint scanner and they aren't related to speed., about half of the time the Pixel 6 Pro can't read my finger print at all. I'm coming from Oneplus 7 Pro that feels light years ahead of this fingerprint scanner. I've tried all the tips and tricks people have been recommending, which has helped, but it still says can't read fingerprint 50% of the time. It's very frustrating.
Click to expand...
Click to collapse
Did you re-do your fingerprints after the most recent firmware update? (november)
Also did you heed the fingerprint setup instructions? (full underside first, then sides, then the tip etc). Meaning don't mindlessly hammer your finger on the screen, do what the setup tells you precisely and exactly.
The system tells you what to do - if you do that, it should work without a problem. I got my finger in the system (4x times the same one, just re-do the setup with the same finger) and it works without a problem, nowadays I am getting about ~95% success rate. Even partial ones get through, even though they might take a second or two to register, but that's okey since it's just a partial one.
---
Btw concerning the video that was spreading through reddit, where someone claimed that his girlfriend was able to unlock his phone, without ever having it set up - I recently found that it's possible to use two fingers when setting up one fingerprint at a time (go with one full thumb, then when it asks for the sides, use the other finger from the other person) - that probably happened here, someone tricked the system and then spread fakenews to gain a few likes/attention.
Morgrain said:
Did you re-do your fingerprints after the most recent firmware update? (november)
Also did you heed the fingerprint setup instructions? (full underside first, then sides, then the tip etc). Meaning don't mindlessly hammer your finger on the screen, do what the setup tells you precisely and exactly.
The system tells you what to do - if you do that, it should work without a problem. I got my finger in the system (4x times the same one, just re-do the setup with the same finger) and it works without a problem, nowadays I am getting about ~95% success rate. Even partial ones get through, even though they might take a second or two to register, but that's okey since it's just a partial one.
---
Btw concerning the video that was spreading through reddit, where someone claimed that his girlfriend was able to unlock his phone, without ever having it set up - I recently found that it's possible to use two fingers when setting up one fingerprint at a time (go with one full thumb, then when it asks for the sides, use the other finger from the other person) - that probably happened here, someone tricked the system and then spread fakenews to gain a few likes/attention.
Click to expand...
Click to collapse
Honestly, I can't remember if I re-did after the November update. I'll clear out my fingerprints and try it again. Thanks for the tip
bbacon said:
Honestly, I can't remember if I re-did after the November update. I'll clear out my fingerprints and try it again. Thanks for the tip
Click to expand...
Click to collapse
You're welcome.
The fingerprint setup system was changed after the firmware update, so it's basically mandatory to re-do your fingerprints if you want a higher success rate.
It's a shame that Google doesn't communicate this directly, it should be a system message suggestion right after the update.
What I'm wondering is that maybe some people ended up with a bad FP scanner? I mean it is a possibility since anything can be bad but hopefully we can get enough feedback to get closer to the bottom of this. If someone who has a bad scanner can try someone else's and see if it's still an issue that would probably help although it's not like everyone you know will have a Pixel.
My pixel 6 pro fingerprint reader works most of the time for me. The worst fingerprint reader I've ever used was the Galaxy s20 ultra. That thing didn't read my finger half the time so I just defaulted to the password.
I didnt vote, but mines works about 80 to 90 percent of the time. but it sucks when it doesnt work. It seems it happens at the worst times possible.
It's good but not as fast, accurate or convenient as my Pixel 5 with the Ringke Fusion case and convenient finger-centering sensor cutout.
mmafighter077 said:
My pixel 6 pro fingerprint reader works most of the time for me. The worst fingerprint reader I've ever used was the Galaxy s20 ultra. That thing didn't read my finger half the time so I just defaulted to the password.
Click to expand...
Click to collapse
Same here with the Note 10+. I still kept using it but argh.