Develop Bugs

Android OREO and ROOT

Hello
Cane any one tell me how to root Xiaomi Mi Mix 2 when i got OREO 8.0 android

Get TWRP (oreo version) flash magisk

I got twrp for Oreo. What's version od magisk i must flash?

makutcz said:
I got twrp for Oreo. What's version od magisk i must flash?
Click to expand...
Click to collapse
i used magisk 15.3 with xiaomi.eu oreo rom+twrp, works fine

Ok thanks for replys

Mi-globe rom, you have it built in if you want.

magisk support on miui 10

Hi, I've recently installed miui global beta 8.6.14 on my RN5 pro. Will magsik v16 work on this rom?

Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator

varunkumar007 said:
Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator
Click to expand...
Click to collapse
Howm can I do?

Follow this thread to pass safety net of magisk it helps to hide magisk root
https://forum.xda-developers.com/redmi-note-5-pro/how-to/passing-safetynet-using-tez-whyred-t3800575

zakariya tomal said:
Hi, I've recently installed miui global beta 8.6.14 on my RN5 pro. Will magsik v16 work on this rom?
Click to expand...
Click to collapse
I am using magisk 16.3, it have not any problem
With dev 8.6.21 can use magisk 16.4

Could you elaborate the requirement of safetynet and magisk hide? I'm a tyro here.

Please elaborate .I m also having same problem

Usually the only reason why magisk SafetyNET fails is that Xposed is installed in SYSTEM or in SYSTEM-LESS mode. If you want to pass SafetyNET, you have to remove xposed from the device itself, bc xposed is a framework modification and the framework is included in the SYSTEM, any modification of it would trigger SafetyNET Fingerprint check. Just like rooting a Samsung and triggering Knox, only safteynet fail can be reversed unlike Knox.

Hello, i tried to install Magisk and xposed, but i have bootloop ...
How to fix it, it is possible to install them on miui 10 last stable ?
Link for magisk, xposed framework ?

varunkumar007 said:
Yes it perfectly working in miui 10 ROM but if u want magsik hide u have to active fingerprint using terminal emulator
Click to expand...
Click to collapse
Can you please send an active fingerprint.

Any news about Edxposed Framework on samsung s20+ ?

hi any one know pliz if i can install edxposed framework on samsung galaxy s20+ rooted with lineage recovery ? Thanks
And another question if after rooted with lineage recovery i can update magisk manager and magisk directly with magisk manger ? Thanks

Edxposed works since magisk root... for magisk update you need to flash it with odin.

chieco said:
Edxposed works since magisk root... for magisk update you need to flash it with odin.
Click to expand...
Click to collapse
Thanks . Have u tested install edxposed on s20 series . There is no bootloop problem ?

the new said:
Thanks . Have u tested install edxposed on s20 series . There is no bootloop problem ?
Click to expand...
Click to collapse
No bootloop

chieco said:
No bootloop
Click to expand...
Click to collapse
Ok thanks will test

I had an issue with random reboots. Once they started it seemed like it would reboot 4 or 5 times and then it would stop. Did it once a day at least. Installed Vanced and removed Edxposed. No issues since. Could've been the app to go along with getting Vanced working but i froze it and it still happened so i dont know. Removing Edxposed completely and the apps to get Vanced working stopped the random reboots though.

@Fuzzy13
you must have done something wrong... everything works flawless with those xposed magisk modules + xposed manager + vanced from magisk repo.

need help installing edxposed s20 ultra snapdragon oneui 2.5 rom
magisk 21.1 stable and manager 8.0.3
i tried sandhook and yahfh both give me bootloop after installing last core
any tips ?

MaZaGnGy said:
need help installing edxposed s20 ultra snapdragon oneui 2.5 rom
magisk 21.1 stable and manager 8.0.3
i tried sandhook and yahfh both give me bootloop after installing last core
any tips ?
Click to expand...
Click to collapse
Install Riru Core v21.3 and YAHFA EdXposed build from > here < (official alpha builds from EdXposed devs).
And ofc latest EdXposed Manager.

serajr said:
Install Riru Core v21.3 and YAHFA EdXposed build from > here < (official alpha builds from EdXposed devs).
And ofc latest EdXposed Manager.
Click to expand...
Click to collapse
thank you mate for your reply but i also tried this without luck
and i searched about this problem and i found it is because the kernel enforce selinux so i flashed the custom kernel (jimbok) and turned it to permissive and it worked now without any issue .
i need a way to change stock kernel to permissive because the way i use didn't work
i use terminal command ''setenforce 0'' it doesn't change anything in stock kernel but it worked with the custom one

MaZaGnGy said:
thank you mate for your reply but i also tried this without luck
and i searched about this problem and i found it is because the kernel enforce selinux so i flashed the custom kernel (jimbok) and turned it to permissive and it worked now without any issue .
i need a way to change stock kernel to permissive because the way i use didn't work
i use terminal command ''setenforce 0'' it doesn't change anything in stock kernel but it worked with the custom one
Click to expand...
Click to collapse
That's weird I gotta say.
I have the setup I mentioned and everything works flawlessly (along with latest magisk canary). My SM-G985F with stock firmware is running on enforcing selinux, as it should.

serajr said:
That's weird I gotta say.
I have the setup I mentioned and everything works flawlessly (along with latest magisk canary). My SM-G985F with stock firmware is running on enforcing selinux, as it should.
Click to expand...
Click to collapse
i think your device not a snapdragon version so you dont have this issue
because i saw in https://github.com/ people like me using snapdragon fold 2 and tab s7+
im not good enough to understanding why but i found this
(The interesting thing about the failure on the Fold2, a Snapdragon device, is that a dependent feature of RKP, namely CONFIG_KDP_CRED, stops 2020 Samsung Snapdragon devices from booting when the EdXposed Magisk module is enabled.
My hope is that fixing this RKP patch in Magisk will have the side-effect of allowing 2020 Samsung Snapdragon devices to boot EdXposed with the device's stock kernel.)
and in the end someone said you must use permissive to fix the boot loop
im waiting a fix for that or someone guide me to make the stock kernel permissive because it is not easy like before

MaZaGnGy said:
i think your device not a snapdragon version so you dont have this issue
because i saw in https://github.com/ people like me using snapdragon fold 2 and tab s7+
im not good enough to understanding why but i found this
(The interesting thing about the failure on the Fold2, a Snapdragon device, is that a dependent feature of RKP, namely CONFIG_KDP_CRED, stops 2020 Samsung Snapdragon devices from booting when the EdXposed Magisk module is enabled.
My hope is that fixing this RKP patch in Magisk will have the side-effect of allowing 2020 Samsung Snapdragon devices to boot EdXposed with the device's stock kernel.)
and in the end someone said you must use permissive to fix the boot loop
im waiting a fix for that or someone guide me to make the stock kernel permissive because it is not easy like before
Click to expand...
Click to collapse
Yep mate, exynos!
I didn't know snapdragon devices were facing such issue. I've searched on this now and found this, but I guess you already saw it.
Hopefully a fix will come out soon!

It totally works!I tried it in July/August

Xposed

Is there a working Xposed framework for
RN8 ?

jeremyroot said:
Is there a working Xposed framework for
RN8 ?
Click to expand...
Click to collapse
for android 9 yes

you should unlock the bootloader and flash a custom recovery then root the phone with magisk, install edxposed manager apk and from magisk install Riru (riru core) and install riru - edxposed and you are good

not for Android 10?
the_weird_aquarian said:
for android 9 yes
Click to expand...
Click to collapse
ShouldI assume that means there isn't one for Pixel Experience Android 10?

jeremyroot said:
ShouldI assume that means there isn't one for Pixel Experience Android 10?
Click to expand...
Click to collapse
no xposed for Android 10

the_weird_aquarian said:
no xposed for Android 10
Click to expand...
Click to collapse
are you sure?

the_weird_aquarian said:
no xposed for Android 10
Click to expand...
Click to collapse
all the roms i tested so far (about 20) are based on android10 and i install xposed no problem
if you are not sure of an information = don't answer
to everyone :
just keep in mind that the methode changed from the old 4.4.4 apk ...
this is how it work now :
unlock bootloader
install twrp
flash magisk
boot into rom
open magisk manager and go module
install riru core and riru EDxposed
reboot
install EDxposed manager apk
done

loopypalm said:
all the roms i tested so far (about 20) are based on android10 and i install xposed no problem
open magisk manager and go module
install riru core and riru EDxposed
reboot
install EDxposed manager apk
done
Click to expand...
Click to collapse
Not Done. It tells me to upgrade Edexposed, leads me to GitHub where there is no link for it.

jeremyroot said:
Not Done. It tells me to upgrade Edexposed, leads me to GitHub where there is no link for it.
Click to expand...
Click to collapse
1-magisk-riru-v21.3.zip
https://github.com/RikkaApps/Riru/releases
2-EdXposed-SandHook-v0.4.6.2.4529.-release
https://github.com/ElderDrivers/EdXposed/releases
3-restart
4-EdXposedManagerxxxxxxxxxx.apk
https://github.com/ElderDrivers/EdXposedManager/releases

Question Root with Magisk for Poco F5

Hi, I have intention to buy this phone. I see unofficial TWRP is hereby skkk, would Magisk work?

No need for TWRP to root.
To adapt to your device.
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM Dear Xiaomi 13 user, I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems...
forum.xda-developers.com

NOSS8 said:
No need for TWRP to root.
To adapt to your device.
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM
[All-in-One] Xiaomi 13 (fuxi): Unlock Bootloader, Root, Flash TWRP, Flash ROM Dear Xiaomi 13 user, I'm not responsible if anything happens to your device. If you execute these AiO procedures properly then you shouldn't face any problems...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks, but my question was the inverse: I want to root, typically I did using TWRP and flashing magisk zip. I was guessing if Magisk supports Poco F5 already.

fubo73 said:
Thanks, but my question was the inverse: I want to root, typically I did using TWRP and flashing magisk zip. I was guessing if Magisk supports Poco F5 already.
Click to expand...
Click to collapse
This method is not recommended due to A/B partitions and current TWRP development for A12/13.
And root for what?

NOSS8 said:
This method is not recommended due to A/B partitions and current TWRP development for A12/13.
And root for what?
Click to expand...
Click to collapse
I use root for two main purposes: ad blocker in hosts (as I also use VPN service, so I don't want to keep VPN busy with ad blocker) and removal of bloatware with magisk debloater.

fubo73 said:
I use root for two main purposes: ad blocker in hosts (as I also use VPN service, so I don't want to keep VPN busy with ad blocker) and removal of bloatware with magisk debloater.
Click to expand...
Click to collapse
Try a Xiaomi Eu rom, don't need all that.

NOSS8 said:
Try a Xiaomi Eu rom, don't need all that.
Click to expand...
Click to collapse
Xiaomi.eu ROM for 12 Turbo / Poco F5 with root is great, because one can install among others ad-block apps such as AdAway and block all ads in apps (Youtube excluded). I rooted xiaomi.eu (via magisk and "boot.img") couple of days ago and it's working great. You're right, when you wouldn't recommend rooting via TWRP and flashing magisk.zip for the reasons you mentioned in post #4 above.

Have any of you tried installing viper4android magisk?
A lot of devices are being unable to install the old viper 4 android. I know there's a 64bit version now that usually works on devices that can't install the other one. It doesn't have all of the features it's missing headphones surround sound and gain increase. Which are the two best features of the whole vipers situation. So I want to purchase a Poco F5 or F5 pro. So I am wondering if viper is working?
You'll probably have to install magisk delta canary latest build because the new magisk v26.1 won't work with viper now either. It will work if you Install viper with magisk delta and then switch to magisk official v26.1.
Normally what you do is you install the busy box module, The James DSP 4.6 module, Selinux permissive module, audio modifications library 4.2 module and the viper for Android module finally. You don't have to use the James DSP but sometimes it corrects problems in the system to get viper to work. I'm not sure how much you guys are aware so I am trying to cover everything.
Pixel 6, 7 pro it won't work on. My tab S8 plus, S22 and S23 ultra it won't work on. Pixel 7 pro with AOSP roms make it work when those are available.

Techguy777 said:
Have any of you tried installing viper4android magisk?
A lot of devices are being unable to install the old viper 4 android. I know there's a 64bit version now that usually works on devices that can't install the other one. It doesn't have all of the features it's missing headphones surround sound and gain increase. Which are the two best features of the whole vipers situation. So I want to purchase a Poco F5 or F5 pro. So I am wondering if viper is working?
You'll probably have to install magisk delta canary latest build because the new magisk v26.1 won't work with viper now either. It will work if you Install viper with magisk delta and then switch to magisk official v26.1.
Normally what you do is you install the busy box module, The James DSP 4.6 module, Selinux permissive module, audio modifications library 4.2 module and the viper for Android module finally. You don't have to use the James DSP but sometimes it corrects problems in the system to get viper to work. I'm not sure how much you guys are aware so I am trying to cover everything.
Pixel 6, 7 pro it won't work on. My tab S8 plus, S22 and S23 ultra it won't work on. Pixel 7 pro with AOSP roms make it work when those are available.
Click to expand...
Click to collapse
Try this: https://github.com/programminghoch10/ViPER4AndroidRepackaged
Worked like a charm for me on my Xiaomi 12X, install it as a magisk module.

carlese said:
Try this: https://github.com/programminghoch10/ViPER4AndroidRepackaged
Worked like a charm for me on my Xiaomi 12X, install it as a magisk module.
Click to expand...
Click to collapse
I don't have the Poco F5. I want to know before buying it if it can use the good viper or repackaged on stock? Anyone know on Poco F5?

can i install custom rom in poco f5?

Techguy777 said:
I don't have the Poco F5. I want to know before buying it if it can use the good viper or repackaged on stock? Anyone know on Poco F5?
Click to expand...
Click to collapse
No, you need to root the phone first, then you can use it also on stock rom