Related
This Nooter is officially supported by The Nooter Project for Nook Simple Touch
I'm not adding certain things because I don't believe they should be available as part of a rooting kit designed to give users more control of their devices. Things such as additional readers or CPU Clocks are up to the user to install themselves and needlessly putting them in Nooter creates app bloat that a user may or may not want. You can always drop Apps you want into \nooter\data\app and they will install automatically when you root the device. This Nooter is designed with the sole purpose of opening up the possibilities of the device by giving users Root, Google Apps, and other Apps which make the device more usable as an android device than just an e-reader.
What it does:
Enables ADB via uRamdisk
Installs adbWireless
Installs Button Savior
Installs Amazon Marketplace
Installs su and Superuser.apk
Installs ADW + E-ink Friendly Theme
Installs Busybox & Busybox Installer/Uninstaller
Installs Gapps (Gmail, Market, Youtube, Others)
Installs NookColor Tools (To Enable Non-Market Installs)
System Files that get Modified:
/system/build.prop - Enabling Google Check In
packages.xml - Allows Gapps to install properly.
framework.jar - Should allow a proper Android ID to generate.
Changes:
May 26, 2012 - Initial Release
Before you begin:
You must already have a registered Nook Simple Touch Glow
You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
You must either have dd (Linux) or WinImage (Windows) software.
You must have an external microSDCard reader or this will not work. Using the Nook Simple Touch can result in it becoming unusable (bricked).
You must have enough intelligence to follow instructions.
Let's get started:
Download CWM from here: http://forum.xda-developers.com/attachment.php?attachmentid=806435&d=1323121399
Download TouchNooter from here: glownooter-1-12-25.zip - Uploaded
Download eded333's beta5-1XWUMFTouch-PART-2-END from here: http://nooter.googlecode.com/files/beta5-1XWUMFTouch-PART-2-END.zip
Unzip CWM and you'll find an image file you will then need to write this to an SD Card.
Linux: Unzip and use dd if=cwmimagename.img of=/dev/sdcard
Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
Windows Alternative: https://launchpad.net/win32-image-writer/+download
Power off your Nook Simple Touch.
Insert TouchNooter SDcard into your Nook Simple Touch.
Power on your Nook Simple Touch.
User "n" to select, Left Buttons to go up in the menu, Right Buttons to go down in the menu, Power Button to go back.
Install from zip
Choose zip from sdcard
glownooter-1-5-26.zip
Click Yes and let Complete
Remove SD Card and press Power Button to go back one to main menu
Click Reboot
Upon boot unlock your screen.
At the Android Welcome Screen skip Sign In.
Enable Location Services when given the option.
Connect to Wifi and launch Youtube from ADW's App Drawer (Or the App Drawer of your Choice).
Click the Menu button (The right one in the middle of the status bar).
Select "My Channel" and Login using your Gmail Account.
Exit Youtube and Launch Gmail from ADW's App Drawer.
Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
Power off your Nook Simple Touch.
Insert TouchNooter SDcard into your Nook Simple Touch.
Power on your Nook Simple Touch.
User "n" to select, Left Buttons to go up in the menu, Right Buttons to go down in the menu, Power Button to go back.
Install from zip
Choose zip from sdcard
beta5-1XWUMFTouch-PART-2-END.zip
Click Yes and let Complete
Remove SD Card and press Power Button to go back one to main menu
Click Reboot
Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
Enable Non-Market Installs by running the NookColor Tools App.
If your Youtube fails to launch Uninstall and Reinstall Youtube from /data/app
Go to Settings > Device Info > SdCard > UnMount > Format
Thanks To:
mali100 - For porting CWM to Nook Simple Touch
eded333 - The second zip to fix Market Issues.
MrMuffin - For the original Market Hack that we're using.
If I'm using an app in TouchNooter and you would like Credit/Thanks, or to have it removed, please PM me, otherwise I might not see your requests
Currently Working On: Raspberry Pi Triple Boot System
It works!! Thank you thank you thank you thank you!
It works.
You couldn't have made me day any happier, Your hard work has given me a small tablet that I will use at work for keeping notes and recalling info. I'll be Joe cool with the info.
Thank you for all your hard work, I'll look in my couch and find something to donate.
Anyone experiencing problems accessing settings/screen to change the screesaver Folder?
Sent from my NOOK using xda premium
I have previously rooted using Roustabout's tinynoot. If I decide to do this Nooter, would I have to restore to stock first? (Haven't decided yet, pretty happy as is, but would like to know the options.)
Thanks,
Dude, nice job! Now to go buy a glowlight.
Hi,
Hmm, awesome =), just installed this on my Nook STR Glow.
Two questions
1. What's the best way to get Market searching enabled?
I've heard of installing SearchMarket - however, how do you do that? Do you just find the APK and install it manually?
2. Is it possible to install the Multitouch and NoRefresh patch from here?
http://forum.xda-developers.com/showthread.php?t=1568560
Or is the Glowlight version different enough that these won't work?
Cheers,
Victor
Anybody have trouble with getting the Opera Mini that comes with this to work? It doesn't even open for me. I installed Dolphin Mini and it seems to work ok but I'd like to get Opera working.
Multi-language root
This is great!
Is there a way to add menus and/or keyboard with another language?
xanadu1979 said:
Anybody have trouble with getting the Opera Mini that comes with this to work? It doesn't even open for me. I installed Dolphin Mini and it seems to work ok but I'd like to get Opera working.
Click to expand...
Click to collapse
Try opera mobile, not mini.
@glowco: I'm looking at GD's scripts and the tinynoot scripts right now.
It looks as if I used the same binary (despite the different name) for the
/system/app/Superuser piece (the file sizes and mod dates are identical.)
I used a different release of busybox, though. So the busybox my script installed would be overwritten by the glownoot busybox.
My advice is that if you want to get the google apps working, restore from a nonrooted backup and use this tool. I'm very likely to ignore my advice on my own device and see what happens, but today's not likely the day that's going to happen.
The line in glownooter that does the copy-in is:
package_extract_dir("system/xbin/", "/system/xbin/");
Unless the package_extract_dir command wipes a directory before copying in the file, you'd overwrite busybox at that step but leave the links to it. The links would probably continue to work but if there's an important difference between the two busyboxes, you might find it made trouble in a weird, random way long after you'd forgotten that you'd overlaid one root with another.
The busybox updater/manager might alleviate that issue - not sure what Ed's or GD's take on overlaying one root with another is.
Roustabout, thanks for your reply. I'm not rushing into anything, so if you do decide to try installing this over yours, let us know the results. (I tend to like the easier approach if it works okay.)
Maybe I should take this opportunity to ask an additional question: what will this root let me do that tinynoot didn't, other than run the Market? What additional apps would it allow me to run that would actually run well?
One app I have partially working on tinynoot is Jabiru, a jabber chat client. The basic chat connection works, but the Conference function crashes the session. I doubt this other root would make a difference in something like that?
Thanks.
I just did this and it works great. The only problem I have noticed is that when I am in gtalk and trying to chat I only see the top two rows of keys. Is anyone else getting this or know how to fix it?
Hi,
before to try rooting the nstglowlight, is it possible to make backup with noogie like the normal NST ?
Yes, you can and should boot from a noogie disk and make a whole-device backup before changing things up, just like with the NST.
Assuming that tinynoot used MinimalNooter as a basis for it's design (as is evident by the forum convo) then GlowNooter will run perfectly fine without any issues, however keep in mind that because the package names for files in GlowNooter in /data/app are likely to be different than those in tinynoot you'll end up with multiple copies of things like Amazon market, which doesn't actually affect performance, but can take up more space. So you have two options, the first is to do a fresh install onto a fresh NTG, or you can install this on top of tinynoot and go in and remove the excess files using Super Manager.
Aurtach said:
I just did this and it works great. The only problem I have noticed is that when I am in gtalk and trying to chat I only see the top two rows of keys. Is anyone else getting this or know how to fix it?
Click to expand...
Click to collapse
Using an alternative keyboard could fix it, the major issue is finding an alternative keyboard that is e-ink friendly. This tends to be broken in the app itself, because I have noticed the Google Voice app will do the same exact thing on nook devices.
glowco said:
Maybe I should take this opportunity to ask an additional question: what will this root let me do that tinynoot didn't, other than run the Market? What additional apps would it allow me to run that would actually run well?
One app I have partially working on tinynoot is Jabiru, a jabber chat client. The basic chat connection works, but the Conference function crashes the session. I doubt this other root would make a difference in something like that?
Thanks.
Click to expand...
Click to collapse
The difference between this and tinynoot IS the fact it has Market on it, you can actually go to google.com/play now and install apps to the device. Other than that there is no major difference.
Yeah, folks should understand what tinynoot grew out of: I wanted the smallest set of changes I could make to have a rooted NST usable by me. I almost didn't include the Amazon appstore, but then realized there were things I wanted from it and that it'd be more helpful to others if there was at least something
That's very bare-bones, because I don't use the NST for too much other than reading - I want an rss reader, a non-BN book reader and my contacts (via b-folders, rather than a google account,) and at that point I'm pretty much done. I often install what I want to a fresh device just using adb or pm from a commandline
Gabrial's trying to get the Google market working because so many folks really want it.
Also, I tested tinynoot against an NST last night and was able to root that using it, which is helpful to me.
That said, here are the files tinynoot copies in; it sounds as if the two rooting tools are compatible, which is helpful.
in system:
/system/xbin/busybox
/system/bin/su
/system/app/NookColorTools.apk
/system/app/com.noshufou.android.su.apk
and in /data/app:
ADW.Launcher_v1.3.6_Standalone.apk
Amazon_Appstore-2.1.0.apk
BusyBox_v7.3.apk
Button_Savior_v1.3.1.apk
NookTouchTools_v1.0-beta2.apk
Super_Manager_v2.6.0.apk
adbWireless_v1.4.1.apk
and that's that.
credits
- almar (Marc)
- bsbsbs (Sándor)
- Egon
- phj (János)
- Voyteckst
- frenkie9999999
- spiderman1961
- kukafei
- linuxsight
- glimmling
- MinL
-Antoxa1998
thanks to all the above the dream of runing android on i8000 came true. and because of their job we were expecting faster and faster, more and more efficient and smooth versions.
i followed their path. got a version, modified it, combined the best parts of each ROM and i am offering a new ROM much closer to be complete and less beta.
DETAILS ABOUT THE ROM
It is not based on frenkiedroid as far as i know but followed other path onto chinese ROMS. I think it is faster than any other ROM (tell me if not). It has achived score 1035 on antutu on my class 10 sd card (this is almost the speed of a native android phone using cm6 and this fast hardware)
According to measuments made using Benchmark & Tuning it is up to 56% faster compared to the already fast frenkiedroid
Tested
bluetooth
wi-fi
3g
calling
sms
radio
gps
usb connection
battery lasts up to 2 days
Changelog
Version 8
Information, installation instructions and photos below (post no34)
http://forum.xda-developers.com/showpost.php?p=50188850&postcount=34
Alternative download of cm6new v8 with 2.6.32.9 kexec kernel
Download from here
Information, installation instructions and photos below (post no35)
http://forum.xda-developers.com/showpost.php?p=57062016&postcount=35
Version 7
Information, installation instructions and photos below (post no33)
http://forum.xda-developers.com/showpost.php?p=50188850&postcount=33
Version 6
Information, installation instructions and photos below (post no30)
http://forum.xda-developers.com/showpost.php?p=49775913&postcount=30
Version 5
Information, installation instructions and photos below (post no25)
http://forum.xda-developers.com/showpost.php?p=48486739&postcount=25
Version 4
Information and photos below (post no4)
http://forum.xda-developers.com/showpost.php?p=44427775&postcount=4
Version 3
(mirror) (sendspace service)
- fixed gsm not working with some SIM cards (now i hope it can work with all networks)
- improve speed compared to version 2
- fixed other bugs
Version 2
- improved build.prop
- fixed account problem
- fixed camera problem
- fixed some crash bugs
- installed suggested programs (freeware)
Version 1
(initial release)
This ROM has preinstalled only the basic programs to allow you add any other program you desire from market.
I also suggest you another package of apps (dialers, sms apps, pictures and video apps) here
Alternative kernels
froyob3 kernel
CM6B2kernel
mini kernel
medium kernel
big kernel (original)
Installation instuctions:
We backup our data on our card
download mini-tool
connect your phone with computer on usb disk mode for our sdcard της (alternatively you can select your storage, but here i describe sd-card installation)
install and run minitool
select your sd-card and erase all partitions.
create a) one partition primary fat32 (the sum of sd-card's mb minus 1533 mb), B) one partition primary ext4 for our android sized 1333 mb , γ) one partition primary linux swap with the rest 200 mb
select apply and wait
you decompress the file ROM and Tools.rar
We change the date of our computer on any date of sept 2011
we run ImageRecover.exe
select restore (normal) and next
search on your computer the disk, the folder that our ROM is stored ( .TBI file) and select it
on the new window select select the last down option
then on the new window select the partition of our sf card to install (this is the medium partition sized 1333 mb (will write next to it MBR1.....linux native) and click onto it and press next
On next window when see "all data on linux native partition lost" press "yes" and wait copying to reach 100%
reopen minitool an if after ext4 partition there is left some unused/unformated space (grey colour) delete linux swap partition and create a new linux swap primary partition including this time the previously seen unused space
when finish select settings on your phone and change usb connection mode on your phone to "my storage"
In the root of "my storage" we paste a) haret.exe, B) zImage, c) startup.txt from the folder "copy to storage card root" from the rar we downloaded and decompressed
Disconnect our phone from usb, enter "my storage" and run haret.exe
this is the end. android starts. hope you enjoy
Hi guys, any reports on testing this ROM?
I want to set up my old Omnia 2 with Android for my gf, so I'm looking for a stable and simple ROM for her.
Thanx.
sergio_sos said:
Hi guys, any reports on testing this ROM?
I want to set up my old Omnia 2 with Android for my gf, so I'm looking for a stable and simple ROM for her.
Thanx.
Click to expand...
Click to collapse
You can try either my ROM or twister2 ROM from here http://forum.xda-developers.com/showthread.php?t=2342764
they are both the same level
the fastest is mine
faster GPS in on mine (ms-based preconfigured)
wi-fi i think works a little better on twister
twister has preloaded facebook etc, while mine has only stock apps
mine has business (single) coloured menus while twister has fancy (multi) coloured menus
if you want to install optional apps that have ads and you are not expert on android then install twister
if you want to install apps that do not have ads (or have ads and you are android expert) you can choose mine
please not that some people mentioned that with my ROM their SIM card was not recognized. i am not sure if the same for your SIM, your country.
Only two ROMS to choose. so you need only a few hours to try them both and make your decision. the choise is yours
Samsung i8000 (omnia2) android cm6new rom v4
as I promised long ago to publish
SAMSUNG I8000 (OMNIA2) ANDROID CM6NEW ROM Version 4
- Support even more SIM
- Speed improvement - response
- Corrected some errors
- Upgrading of most programs
- Show ics (ice cream sandwich - android 4.0.X)
- Arrangements for energy savings
The new enhancements took me some time and study. I8000 reaches its limits due to its old drivers that are already written for mobile identical hardware with it.
Hope you like it and I expect opinions and suggestions to version 5 if there will be any further developments. Otherwise I will try to assist in the plan for android 2.3 on our mobile.
Explanation photo below
1 = home screen (the background is black on purpose because the amoled screen thus consumes less energy. If you want to change select another background with as many black dots. Black and not just dark color.)
2 = dialer with ics theme, search function names and support many languagesk. Make it default dialer if you like it
3 = new android ics Task Manager (task manager). Appear with long press of home button. If you do not like replace it with the Advanced Task Manager or ICS Task Manager / Switcher. To open them again by long pressing the central button select Settings / Cyanogenmod Settings / Input / Long-press home settings / select custom application
4 = ics camera
5 = menu ics (holo launcher)
6 = ics settings
For those who want even more contemporary look can choose Active lockscreen or Holo Locker
I tried installing this on my Omnia II.
I successfully create the partitions on my SD card, but when I go to starting the process with the ROM file, it comes back with the error message:
"The image file requires an updated version of this program."
I grabbed the latest version just to try it, and I need to purchase a key to make it work.
Yes, I reset my computer clock to September 1st, 2011. Do i need to reboot the machine after the clock reset?
Everything else so far seems to work fine, and if this works even half as good as I think it will, props to you for getting this done. I hate hate HATE winblows 6.5 on my Omnia II, and always wanted android. I tried a few of the older attempts years ago, but nothing was every stable enough to keep it.
Thanks again for any help.
where can i download the ROM ?
nemogamo said:
where can i download the ROM ?
Click to expand...
Click to collapse
download from here
http://www.gigasize.com/get/ndmo3y3hj2f
Ragnarkov said:
I tried installing this on my Omnia II.
I successfully create the partitions on my SD card, but when I go to starting the process with the ROM file, it comes back with the error message:
"The image file requires an updated version of this program."
I grabbed the latest version just to try it, and I need to purchase a key to make it work.
Yes, I reset my computer clock to September 1st, 2011. Do i need to reboot the machine after the clock reset?
Everything else so far seems to work fine, and if this works even half as good as I think it will, props to you for getting this done. I hate hate HATE winblows 6.5 on my Omnia II, and always wanted android. I tried a few of the older attempts years ago, but nothing was every stable enough to keep it.
Thanks again for any help.
Click to expand...
Click to collapse
ok try this ROM recovery program
http://www.gigasize.com/get/fososg405ld
please read very carefully instructions. hundreds of people verify programs are working how come not work only on some pc's ?
spkraul said:
ok try this ROM recovery program
http://www.gigasize.com/get/fososg405ld
please read very carefully instructions. hundreds of people verify programs are working how come not work only on some pc's ?
Click to expand...
Click to collapse
I tried this program, and again, comes up with the same error message.
I'm getting to the point where I have to change the date, then run image for windows, but it just keeps giving me that error.
I'm running windows Vista, could that be causing the issue? is there any other information I need to change or pay attention too?
I'm literally doing everything step by step, and yet its not working for me.
spkraul said:
download from here
http://www.gigasize.com/get/ndmo3y3hj2f
Click to expand...
Click to collapse
downloading.. take a longtime
would you mirror to mediafire or 4shared
thx.. will report when its done
nemogamo said:
downloading.. take a longtime
would you mirror to mediafire or 4shared
thx.. will report when its done
Click to expand...
Click to collapse
it's only 542.27 KB. how long time can get to download ?
even if you have dial up or the server is full you need seconds to download it
just make sure the time change is ok and better cut all internet connections before execute the program
spkraul said:
it's only 542.27 KB. how long time can get to download ?
even if you have dial up or the server is full you need seconds to download it
just make sure the time change is ok and better cut all internet connections before execute the program
Click to expand...
Click to collapse
i think you have mistaken me with ragnarkov
anyway i already downloaded the file
follow the procedure
until trying to restore image
got an error " the image file requires an updated version of this program"
internet id off
antivirus is off
date set to 1 september 2011
I've just tested it, the same problem I had as others already mentioned. I went back to the version 3, success! So I think the version 4 image is damaged or not correctly made. By the way, the version 3 that did work for me has no microsd card support. You should modify by yourself the startup.txt file to enable the sd card support.
Hope my words can be helpful to others.
santich said:
I've just tested it, the same problem I had as others already mentioned. I went back to the version 3, success! So I think the version 4 image is damaged or not correctly made. By the way, the version 3 that did work for me has no microsd card support. You should modify by yourself the startup.txt file to enable the sd card support.
Hope my words can be helpful to others.
Click to expand...
Click to collapse
i made my ROM to be installed on sdcard with sdcard support. Hundreds of users already installed it and no problems at all. i installed V4 again last night and no problem at all. my phone is i8000 8gb version if you install on storage card YES you should edit startup.txt and also edit vold.fstab and fstab files.
if find some free time from android 2.3 development project testings i will make a Version 5 and on this version i hope minor problems to be solved.
I downloaded the newest version of Image for Windows, which is v2.83 (the one in the package is v2.61), the tool to write the image into the partition ext4, and this time, everything went just like a charm.
I have to admit that the V4 image is a very good one. It's really fast and clean. I think the problem that we had before is caused by the lower version of Image for Windows. V2.61 can't load correctly the V4 image file, which I think is made by a higher version of Image for Windows. With the new version of Image for Windows, it's even not necessary to change the date.
The Chiese ringtones in this ROM are hilarious. I'm a Chinese, they are OK with me. But I think original ringtones would be better for common users, hehehe.
great work , will it work on omnia b7610 too !!
Where can I download mini tool ?
---------- Post added at 09:05 AM ---------- Previous post was at 08:24 AM ----------
aljo00 said:
Where can I download mini tool ?
Click to expand...
Click to collapse
found it
Will this work on the Verizon i920? Thanks in advance.
matthewtyson said:
Will this work on the Verizon i920? Thanks in advance.
Click to expand...
Click to collapse
technically yes it can run. but i do not own one to test it myself. you can try yourself and tell us your experiences. test on sd card installation first. it it pretty smooth and fast. you will be amazed. in case it will not work you can always check TwisterV2 ROM also very fast and smooth
see here http://forum.xda-developers.com/showthread.php?t=2342764
alternatively in case you meet some driver conflicts you can always use ubuntu and other ROM's drivers to edit this ROM and make it work for you.
spkraul said:
i made my ROM to be installed on sdcard with sdcard support. Hundreds of users already installed it and no problems at all. i installed V4 again last night and no problem at all. my phone is i8000 8gb version if you install on storage card YES you should edit startup.txt and also edit vold.fstab and fstab files.
if find some free time from testings i will make a Version 5 and on this version i hope minor problems to be solved.
Click to expand...
Click to collapse
I am facing the same issue, I cannot load my Storage Card.
1. I am confuse with term SD Card here. Is it refer to Storage Card or My Storage? Storage Card means external micro sd card, isn't?
2. I followed the instruction and put the Image to Storage Card. How can I activate the Storage Card Support by editting fstab files? Where can I find these files?
3. I had format Partition 1333Mb to ext4 File System, but I wonder why it always turn to ext3 after I restore TBI file(after ImageRecover step). Is it okay?
Thanks.
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Paulzt said:
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Click to expand...
Click to collapse
Good thread Paul nice to have a place to discuss this tablet i have just posted in the other thread you refereed to but will also post it here below
I bought a 10.1 Allwinner A31s 16GB from Ebay for £60 the device details show as a YONESTOPTECH BS1078
It is a nice tablet for the price and came pre rooted witch was great.
One of the first things i did was make a backup off the Rom with online nandroid backup as i like messing and wanted a backup just in case i messed up. and here is where things got messy, online nandroid backup would only be able to restore if i had a custom recovery (CWM or TWRP)
So off i went and tried to install TWRP from the guide on this thread http://forum.xda-developers.com/showthread.php?t=2210676
Long story short it didn't work an i thought i had bricked it as it was stuck on the boot logo, i managed to find FW for a Q102 A31S Tablet Stock Firmware 4.4.2 wich is the same tablet under a different name, after several failed attempts to recover through phoenix suite as i couldn't get it into recovery, i downloaded phoenixcard and successfully flashed the FW Phew all was good lol.
So if anyone has successfully installed a custom recovery any info would be grateful as it would be nice to try a custom Rom.
I have also had a little play with dragonface for allwinner devices as this lets you change a few things on the stock ROM ISO and then you can re flash with your custom changes, Two things i would like to tweak are volume and lcd settings as i feel the volume on this device is to quiet and the lcd contrast could do with tweaking. in dragon face you can load the sys.cofig settings, i have found the volume config but haven't got a clue what can be changed to increase the max volume level so if anybody has any knowledge then any input would be appreciated, here is the code for audio settings,
Code:
;pa_single_vol,pa_double_vol: 31 level,1.5db/step.0x1f is the large volume.
;cap_vol:use for system record,0x0--0db,0x1--24db,0x2--27db,0x3--30db,0x4--33db,0x5--36db,0x6--39db,0x7--42db
;headphone_vol,earpiece_vol: must least than 0x3b. 0x1 is a step.
;headset_mic_vol: headset mic(mic2) vol,use for phone headset mic call
;main_mic_vol: main mic(mic1) vol,use for phone main mic call
;--------------------------------------------------------------------------------
[audio_para]
audio_used = 1
audio_hp_ldo = "none"
headphone_vol = 0x3b
earpiece_vol = 0x3b
cap_vol = 0x7
pa_single_vol = 0x1b
pa_double_used = 1
pa_double_vol = 0x1f
headphone_direct_used = 0
headphone_mute_used = 0
audio_pa_ctrl = port:PA18<1><default><default><0>
audio_mute_ctrl = port:PA17<1><default><default><0>
headset_mic_vol = 6
main_mic_vol = 6
Thanks in advance for any input
Click to expand...
Click to collapse
Got straight from manufacturer today
The FW download link:
Updata tools: http://pan.baidu.com/s/1pJkEHAF
FW: http://pan.baidu.com/s/1gdw0sSz
Of anyone can flash and offer any input that's great.
Thanks,,,, Paul Taraneh
Sorro for offtopic, but has anyone found a suitable case for this tablet?
Paulzt said:
Got straight from manufacturer today
The FW download link:
Updata tools: http://pan.baidu.com/s/1pJkEHAF
FW: http://pan.baidu.com/s/1gdw0sSz
Of anyone can flash and offer any input that's great.
Thanks,,,, Paul Taraneh
Click to expand...
Click to collapse
Just flashed that FW and can confirm it is the stock FW pre rooted and working fine.
Thanks
Sent from my rk3288 using XDA Premium 4 mobile app
ezcast application install error
Hi,
I get an error message when I try to install the ezcast app on the tablet, do you have any
idea why this would happen? I would really like to cast from this device to my tv.
Also when I try to install the fulltilt poker app from fulltilt.com, the site doesn't recognize my
device as an android device. I got over it by copying the .apk file from another device but
I just thought to mention it.
Thanks,
Zohar
Hmm. I've been able to install ezcast on mine, and maybe the poker game was initially meant for windows. Your tab most likely came pre rooted so check your root permission. For ez cast contact the apps developer he is very good at replying just give all stats from about phone . good luck
Sent from my XT1034 using XDA Premium 4 mobile app
Now I know the button + problem prior to update rom
Paulzt said:
YONSTOPTECH AWINNER A31 KIT KAT TABLET 10.1 / 2GB RAM 8 OR 16 GB STORAGE, ANDROID 44.4.2 HDMI, 1080X600 DISPLAY.2 MICRO USB OTG PORTS, MICRO SD CARD SLOT, PRE ROOOTED OR IF NOT SEE BELOW. MADE FOR OEM ONLY BUT MORE GENERIC MODEL HAVE BEEN SEEM THAN AN ACTUALLY OEM LIKE GOOWEEL, FUSION, ONDA, ETC. UNDER $130 ON EBAY COMES WITH ALL CONNECORS, EXT SD CARD, STYLUS, AND TABLET/
I'VE SEEM VARIOUS QUESTIONS ASKED ABOUT MODEL BS 1078 ,ALL OVER THE WEB, ENOUGHTHAT I WISH TO SHARE SOME BASIC AND USEFULL INFO WITH THE MASSES.
ROOT....
THE Best AND EASIET WAY TO ROOT FOR ME HAS BEEN (I OWN 4) ROOT GENIOUS , FOR DOWNLOAD AND INSTRUCTIONS http://androidxda.com/DOWNLOAD-ROOT-GENIUS
IT'S A COMPONANT OF SHUAME AND IS A ONE CLICK ROOT METHOD STANDALONE IN ENGLISH.
RECOVERY...
BASIC RECOVERY IS INSTALLED ALREADY AS MY TABLET WERE PRE ROOTED., THOUGH SOM,E HAVE HAD DIFFICULTY USING THE MANUFACTURER AS THE VOLUME KEYS DON'T WORK PERFECTLY
A TIP=INSTALLED A MOUSE THROUGH THE OTG CABLE PROVIDED AND JUST MOVE MOUSE AROUND TO HIGHLIGHT SELECTION, THE VOLUME UP BUTTON FOR SELECTION. DO NOT PRESS VOLUME DOWN. LET'S YOU UPDATE FROM BOTH INTERESTING AND EXTERNAL
FIRMWARE/ROM ... THE LATESTKITKAT ROM FOR AUGUST 2014 IS AVAILABLE,NOT SURE OF IT'S CHANGELOG AS I'M HAPPY WITH THE 6 29 VERSION AND DON'T WANT TO CABLE YET .SOME HAVE THIS TABLET WITH 4.2, THIS UPGRADE IS TO4.4.2
http://pan.baidu.com/share/home?uk=1679008622 IS THE LINK TO FIRMWARE
TOOLS....
ALLWINNER INCLUDE THE TOOLS FOR EASY SD CARD FLASHING IN THE ALLWINNER A SERIES SDK FOR KITKAT. YOU'LL NEED A 4GB SD CARD, PHEONIX CARD.MSI AND THE WORD DOC INCLUDE IN FIRMWARE PACKAGE TO PUT ONTO EXTERNAL SD CARD SHOULD YOU WISH TO INSTALLED THAT WAY, WHEN POWER ON IT SHOULD START TO BOOT WITH YOUR EXT SD INSERTED, FROM THE SD CARD. ONCE IT REBOOTS, TAKE OUT EXT SD CARD, AND YOUR GOOD TO GO
HERE IS THE FULL SDK THAT YOU'LL NEED AS IT INCLUDE DRIVERS AND TOOLS FOR TWEAKING THE ROM, CHANGE BOOT ANIMATION , AND VARIOUS OTHER. OEM DIRECTED TWEAKS.
http://pan.baidu.com/wap/link?sharei...r_TOOLS&page=1
IN EACH DOWNLOAD ABOVE INCLUDES A WORD DOC IN EN/CHINESE WITH DIAGRAMS TO SHOW YOU HOW TO FLASH, MOD, EDIT BUILD.PROP ETC.
ANY QUESTIONS, DON'T HESITATE TO ASK
PAUL TARANEH
ALSO REF TO http://forum.xda-developers.com/showthread.php?t=2704721 FOR MORE INFO ABOUT ROOTING TABLET
Click to expand...
Click to collapse
Let pressed the button + and hit hit hit hit the power button a lot of times after you begin press the power button some times connect to pc and when in the devices manager appear the new device and start to configure it let it the table quiet now go to pc wait a moment to windows configure it and do it with phoenix, if somebody have win 8 8.1 or 7 x64 you must disble signatures of drivers, in windows 8 go to restar but dont press the button restart, press shift and with shift pressed clic in restar a menu appear go to advanced options, advanced options and later the pc restart with a menu there press 7 for disable the driver signature and there install phoenixm if you already installed install it again and you can see the diferrences, now my tablet is with a new rom and i made it in win 8.1 x64, thanks for all the info, steps and rom thank so much
Anyone know if there's a version of 'CyanogenMod' available for this tablet ???
Thnxs in advance for any info.
I just purchased an AllWinner Q102 Tablet. It took me a day or so to realize that it also is pre-rooted. Here is my problem. I continue to get errors that say "unfortunately google play.... has stopped." or "unfortunately Netflix has stopped"
It's driving me crazy! I can't use any of my regular apps.
The model is a Q102
Android Version
4.4.2
Firmware version
v4.5.0919P
Kernel version
3.3.0
[email protected] #20
Wed Sep 10 21:31:21 CST 2014
It seems like a nice little tablet for the price....
I would rather go to stock if it works rather than a root that is flakey
Thanks for any help you can give!
My Google Play reboots, but no "unfortunately" messages
djrnewcastle said:
I just purchased an AllWinner Q102 Tablet. It took me a day or so to realize that it also is pre-rooted. Here is my problem. I continue to get errors that say "unfortunately google play.... has stopped." or "unfortunately Netflix has stopped"
It's driving me crazy! I can't use any of my regular apps.
The model is a Q102
Android Version
4.4.2
Firmware version
v4.5.0919P
Kernel version
3.3.0
[email protected] #20
Wed Sep 10 21:31:21 CST 2014
It seems like a nice little tablet for the price....
I would rather go to stock if it works rather than a root that is flakey
Thanks for any help you can give!
Click to expand...
Click to collapse
I seem to have the identical tablet (specdevice . com / showspec.php ? id=5f13-c36d-ffd4-db280033c587) purchased in October. Mine was also pre-rooted, and it took me a while to figure that out too!
I do not see the messages/crashes that you see; my apps generally run with stability. I do occasionally experience surprise reboots (presumably from crashes) when I connect a USB device or am attempting to upgrade a large app via Google Play. I assume that my Google Play reboots are somehow related to running out of app disk space. Even though my tablet has 32 GB flash internally (split into two 16 GB flash devices) for some reason only 2GB was allocated to the /data partition, where apps are installed. When I found your post, I was actually looking for a solution to increase my tablet's /data partition. I read about different firmware downloads available (earlier in this thread, and in a chinagadgetsreviews blogspot -- sorry, XDA does not let me post links yet) but don't know whether they would help me with my small /data partition problem.
I'd be happy to test any particular apps on my tablet, if that would be of diagnostic use to you. And please let me know if you ever discover a solution to increase the app disk space.
bs1078 tonbux 10.1
Hi mines same bricked it with something now only get heart screen anyone know a fix memory man issues I had root toolbox app and you can change memory cache size etc if not another app carefully as can brick if Ness wrong settings ie screen resolution
stuck on first logo not android man
Hi got same tablet but stuck on very first logo do you know if this is still bootable by your method ? Thanks in advance for any assist
jayden91012 said:
Hi got same tablet but stuck on very first logo do you know if this is still bootable by your method ? Thanks in advance for any assist
Click to expand...
Click to collapse
Jayden just reflash the firmware with phoenix suite.
---------- Post added at 10:05 AM ---------- Previous post was at 10:01 AM ----------
cqfast said:
I seem to have the identical tablet (specdevice . com / showspec.php ? id=5f13-c36d-ffd4-db280033c587) purchased in October. Mine was also pre-rooted, and it took me a while to figure that out too!
I do not see the messages/crashes that you see; my apps generally run with stability. I do occasionally experience surprise reboots (presumably from crashes) when I connect a USB device or am attempting to upgrade a large app via Google Play. I assume that my Google Play reboots are somehow related to running out of app disk space. Even though my tablet has 32 GB flash internally (split into two 16 GB flash devices) for some reason only 2GB was allocated to the /data partition, where apps are installed. When I found your post, I was actually looking for a solution to increase my tablet's /data partition. I read about different firmware downloads available (earlier in this thread, and in a chinagadgetsreviews blogspot -- sorry, XDA does not let me post links yet) but don't know whether they would help me with my small /data partition problem.
I'd be happy to test any particular apps on my tablet, if that would be of diagnostic use to you. And please let me know if you ever discover a solution to increase the app disk space.
Click to expand...
Click to collapse
I reccommend a app called foldermount (Root) you can change storage location to extsd i use it for most games and large apps had this tablet about year now.
Hi ... are the links for firmware etc. in post #1 still good ?,
I don't seem to get anywhere finding the download. ... Jack
jachol said:
Hi ... are the links for firmware etc. in post #1 still good ?,
I don't seem to get anywhere finding the download. ... Jack
Click to expand...
Click to collapse
Here you go jack this is the link to q102 firmware which is same as bs1078 stock.
http://chinagadgetsreviews.blogspot.com/2014/09/download-android-kitkat-442-stock_11.html
If you need anything else just ask i have most stuff on my laptop for this device if needed if links not working.
DJBoxer said:
Here you go jack this is the link to q102 firmware which is same as bs1078 stock.
http://chinagadgetsreviews.blogspot.com/2014/09/download-android-kitkat-442-stock_11.html
If you need anything else just ask i have most stuff on my laptop for this device if needed if links not working.
Click to expand...
Click to collapse
Hi DJB,
Thanks for quick reply ... downloading now, not sure think tried this source before (long story),
will try it with Phoenix USB Pro, chances are I need to come back to you thanks for the offer,
PM will be best I think. ... Jack
Hi,
I have this same tablet and i have a problem. When i connect it to my computer or my girlfriend´s(win 7 and 8.1) The tablet is not recongnized.
anybody know why ? i was trying around to find the drivers but i only found google ones.
I would be really thankfull if u could give me a hand on this.
Lomezno said:
Hi,
I have this same tablet and i have a problem. When i connect it to my computer or my girlfriend´s(win 7 and 8.1) The tablet is not recongnized.
anybody know why ? i was trying around to find the drivers but i only found google ones.
I would be really thankfull if u could give me a hand on this.
Click to expand...
Click to collapse
Hi, sorry for late reply, been tied up with family business for a whle.
re. drivers Pda. net drivers seem to work OK for me, this link should help ... J
http://forum.xda-developers.com/showthread.php?t=1983470
Hello,
is possible manually update my tablet to Android 5? I found this
but from ( ROM Part 1 : http://goo.gl/7pyL97 ) this site i cant download ROM
Upgrade/Update Vodafone Smart Tab 4g to 5.0 Lollipop
Upgrade/Update Vodafone Smart Tab 4g to 5.0 Lollipop
I rewrite this tutorial from forum.xda-developers.com :
The users of Vodafone Smart Tab 4g can now update their handsets to Android 5.0 Lollipop using custom ROM. The new Android 5.0 Lollipop comes with many new features :
- Up to 4x performance improvements.
- A battery saver feature which extends device use by up to 90 mins.
- It has a faster, smoother and more powerful computing experience.
- Support for 64-bit SoCs using ARM, x86, and MIPS-based cores.
- OpenGL ES 3.1 and Android extension pack brings Android to the forefront of mobile graphics putting it on par with desktop and console class performance.
- Responsive, natural motion, realistic lighting and shadows, and familiar visual elements make it easier to navigate your device.
- More intelligent ranking of notifications based on who they’re from and the type of communication. See all your notifications in one place by tapping the top of the screen.
- New devices come with encryption automatically turned on to help protect data on lost or stolen devices.
- SELinux enforcing for all applications means even better protection against vulnerabilities and malware.
- State of the art video technology with support for HEVC main profile to allow for UHD 4K 10-bit video playback, tunneled hardware video decoding to save power and improved HLS support for streaming.
- and other cool features.
Here are some more aspects that users should know before trying out the custom ROM :
- Users need to have proper back-up for their personal data on the device.
- The handset should have at least 80 percent of battery power.
- The users also need to ensure that USB Debugging is enabled on the device.
- During the installation, if the device gets stuck on booting, users can perform wipe cache partition and wipe dalvik before rebooting the device.
Tutorial
1. Download Android 5.0 Lollipop ROM for Vodafone Smart Tab 4g from link below :
The ROM File size is big, so I split the file into 3 parts :
ROM Part 1 : http://goo.gl/7pyL97
ROM Part 2 : http://goo.gl/ffHU2x
ROM Part 3 : http://goo.gl/l1zKh5
To combine 3 parts files above into 1 file just use WINRAR, then extract the files into ZIP format. If any problem with the ROM, maybe because the ROM have corrupted during the download process, you can try to re-download the ROM.
2. Install the ROM Manager on your Vodafone Smart Tab 4g . Get it from Google Play Store, then install the clockwork mod recovery. You also can use ROM Installer application from JRummy Apps Inc.(Get it from Google Play Store).
3. Connect your Vodafone Smart Tab 4g to your PC employing the USB information cable. Copy the “ROM.zip” file you downloaded to the SD memory card.
4. Restart your device in the recovery mode using ROM Manager. As soon as in Recovery Mode, go to ROM Manager and select backup/restore to back-up your information.
5. From the Recovery Menu do a total data erase (including Delvik Cache). When completed, go back to Recovery Principal Menu and choose Flash ROM from SD Card. Navigate the location you copied the ”ROM.zip” file and follow the directions for installing Android 5.0 Lollipop on your Vodafone Smart Tab 4g . As soon as the installation is over, just reboot your Vodafone Smart Tab 4g device, and here you go, you’ve just upgraded it to the new Android 5.0 Lollipop.
Hi:
did you tried it? Have you got root on your Vodafone Smart Tab 4G? I found out a thread with the root file/method, but the file link is broken
jrosado said:
Hi:
did you tried it? Have you got root on your Vodafone Smart Tab 4G? I found out a thread with the root file/method, but the file link is broken
Click to expand...
Click to collapse
The link is now up in modaco.But users are reporting that since an update the root method doesn't work.
skinniezinho said:
The link is now up in modaco.But users are reporting that since an update the root method doesn't work.
Click to expand...
Click to collapse
yes i know.. I'm one of them
I don't understand why some prick upload all tools (root utility and ROMs) for Vodafone Smart Tab 4G to that disreputable server http://downloadsafe.org/? For download it want to send payment SMS messages!!!!! :crying:
If you want my opinion, i think that this supposed lollipop version is fake...
On another forum I've seen this and reports that it works.
I don't have the device (still deciding wether to buy it or not) so I can't test it
http://duben.org/android/vodafone-smart-tab-4g-root-navod
Yes, I've seen that link just a few minutes ago. I will try it tonight, since i don't have my tablet with me now.
Hi, this tutorial duben.org/android/vodafone-smart-tab-4g-root-navod is mine, I was wrote it yesterday in czech language, I hope pictures there are informative enough. In case you need rewrite it to english, let me know, I can take care of it.
Well it worked
But still impossible to use the SD card to install apps Nothing seems to work (app2SD, ...)
jrosado said:
Well it worked
But still impossible to use the SD card to install apps Nothing seems to work (app2SD, ...)
Click to expand...
Click to collapse
I have same issue. Apps can work with data on SD Card, for example RawDroid can edit photos, save/delete files. But App2SD functionality is still not supported. It should work with Link2SD app and 2 partitions on SD card. The reason is emulated external storage in internal memory. I didn't find yet how to turn this of, or how to change it.
sduben said:
I have same issue. Apps can work with data on SD Card, for example RawDroid can edit photos, save/delete files. But App2SD functionality is still not supported. It should work with Link2SD app and 2 partitions on SD card. The reason is emulated external storage in internal memory. I didn't find yet how to turn this of, or how to change it.
Click to expand...
Click to collapse
I've tried Link2SD, but with no success. The best i got was to use MountFolder to move the applications data to the external SD card. With this, I've recovered some good precious space (for example, Minion Rush was using 330MB that where freed).
jrosado said:
I've tried Link2SD, but with no success. The best i got was to use MountFolder to move the applications data to the external SD card. With this, I've recovered some good precious space (for example, Minion Rush was using 330MB that where freed).
Click to expand...
Click to collapse
Thanks for tip FolderMount (play.google.com/store/apps/details?id=com.devasque.fmount) works like a charm.
If anyone wants the source code, here it is:
Code:
http://sourceforge.net/projects/alcatel/files/VF_SmartTab4G_20140923.tar.xz
It was awesome if we could get a rom for this tablet =)
People say it is based on Alcatel Pop 8S tablet, but I have never seen this tablet on sale, neither original roms, nothing about it.
Only alcatel website has some info about it, but not much: http://www.alcatelonetouch.com/global-en/products/tablets/pop_8s.html#.VOPaQfmsVoc
Anyone managed to remove system apps?
Titanium backup says it can't find the apks..
In Android 4.4, apps can't write the sd-card, it's a security thing. But there are apps, which enables sd write. And yes, we have source, but for ROMs we also need recovery, and a developer. But fingers crossed.
sduben said:
Hi, this tutorial duben.org/android/vodafone-smart-tab-4g-root-navod is mine, I was wrote it yesterday in czech language, I hope pictures there are informative enough. In case you need rewrite it to english, let me know, I can take care of it.
Click to expand...
Click to collapse
Anyone tried that? can you confirm that it works?
Any other method that roots 4.4.4?
Yes and it is work. Only "bug" after the root is: every time you reboot your tablet you will got a message that says android is upgrade-ing and continues to updating apps. But it is work.
Sent from my GT-S7560 using XDA Free mobile app
MAROCANU said:
Yes and it is work. Only "bug" after the root is: every time you reboot your tablet you will got a message that says android is upgrade-ing and continues to updating apps. But it is work.
Sent from my GT-S7560 using XDA Free mobile app
Click to expand...
Click to collapse
I stuck on step 7. Finding device... But I did step 5...
What u mean updating apps.? Updates all apps from store?
No, optimezing. Its that thing when android take an update and after that the apps is optimezed. This happening after each reboot. About the root process: if you use win 8, 8.1 you wont be able to rootbso easly because of the drivers. Try with win xp or 7. My advice: use XP. I did it with it.
Sent from my GT-S7560 using XDA Free mobile app
So, to get this straight: we can actually root the Vodafone smart tab 4g and flash custom roms??
Hi all,
I compiled AOSP Extended ROM v. 5.8 (Oreo) and I thought I would share it here as well.
All credit go to the maintainers of the s5mini device tree(s), to AOSPExtended Team and everyone else who contributed.
What does not work (so far):
- Video Recording
- FlipFlap
- Auto-detect APN (I had to manually set it)
- Call forwarding settings menu: Radio (gms/umts) stops working; needs reboot
- Background light for hardware buttons (fixed)
- NFC (Problem with menu/settings) (fixed)
Disclaimer:
* Your warranty is void when flashing this rom. *
* I am not responsible for bricked devices, dead SD cards or other problems. *
Download Link: AospExtended-v5.8-kminilte-20181111-1820-UNOFFICIAL.zip removed: (this ROM is quite old and missing security and other features. Use a Pie build: e.g. https://androidfilehost.com/?w=files&flid=64356&sort_by=date&sort_dir=DESC)
Note: This ROM should work on all Exynos based variants(G800F/M/Y), however I could only test on G800F.
Installation (GAPPS): (You know the drill...)
-Flash ROM with latest TWRP
-Flash OpenGAPPs
-Flash Magisk
Installation (Nanodroid):
-Flash ROM with latest TWRP
-Flash Magisk
-Flash Nanodroid
Created 2018-10-10
Last Updated 2018-10-25
Status Discontinued (sorry no more updates)
Updated ROM (resynced)
thx you for your hard work, i will try it.
Update
I updated the ROM again to include android-8.1.0_r48,
Security patch is now October 5th,
and I also included the AEX boot animation this time.
SD card is not accessible - unfortunately.
But great work, mate
Immortal rider said:
SD card is not accessible - unfortunately.
But great work, mate
Click to expand...
Click to collapse
Hello,
I just checked SD (external) storage and here it is accessible (I can create and delete files&folders). Do use it as internal storage?
you need to give permission for 3rd party apps like amaze (it did not work the first time)
mongo0 said:
Hello,
I just checked SD (external) storage and here it is accessible (I can create and delete files&folders). Do use it as internal storage?
you need to give permission for 3rd party apps like amaze (it did not work the first time)
Click to expand...
Click to collapse
Yes, I tried to use SD card as internal but also as external device.
I also confirm that folders can be created and files can be copied and erased.
But if I want to acces the external card with any APP (likt dict.cc) which needs access to external SD card, it says memory is not accessible.
Just give me a hint, how shall I give permission to 3rd party apps?
Do I set Memory access is in security section in the settings, because this does not work.
Or do I have to access any config file using a terminal?
Thx for your reply, mate.
Immortal rider said:
Yes, I tried to use SD card as internal but also as external device.
I also confirm that folders can be created and files can be copied and erased.
But if I want to acces the external card with any APP (likt dict.cc) which needs access to external SD card, it says memory is not accessible.
Just give me a hint, how shall I give permission to 3rd party apps?
Do I set Memory access is in security section in the settings, because this does not work.
Or do I have to access any config file using a terminal?
Thx for your reply, mate.
Click to expand...
Click to collapse
I'm thinking that dict.cc app is a broken or not fully supporting Oreo. It doesn't even start properly here..( all white or black screen, then, after a long time, a search bar that is not really working ) and 'dict.cc isn't responding' as well as 'GENERIC ERROR' something (at least on first start).
But, eventually I got it to change the directory: (changed Data Storage Location to /storage/3451-1301/). Even though dict.cc said it didn't work...
All the other apps I tried can also access sdcard:
I inserted SD card and started VLC and get this message:
'New external storage detected. Do you want VLC to add device sdcard1 to your medialibrary?'
VLC then can play the music stored on sdcard...
Also, I could access OSMand maps on sdcard I downloaded a long time ago under a different ROM
Anyway, I attached the screenshot with the instructions from Amaze how to grant access (Amaze opens the standard Files (explorer) to that). Maybe it helps...
edit:
Indeed, dict.cc fails to download to sdcard. But OSMand has no problems at all.
Update
Bugfix:
Background light for hw keys fixed (and configurable)
Other hw buttons (home, back, overview) now configurable
Other (probably) important bugfixes
mongo0 said:
I'm thinking that dict.cc app is a broken or not fully supporting Oreo. It doesn't even start properly here..( all white or black screen, then, after a long time, a search bar that is not really working ) and 'dict.cc isn't responding' as well as 'GENERIC ERROR' something (at least on first start).
But, eventually I got it to change the directory: (changed Data Storage Location to /storage/3451-1301/). Even though dict.cc said it didn't work...
All the other apps I tried can also access sdcard:
I inserted SD card and started VLC and get this message:
'New external storage detected. Do you want VLC to add device sdcard1 to your medialibrary?'
VLC then can play the music stored on sdcard...
Also, I could access OSMand maps on sdcard I downloaded a long time ago under a different ROM
Anyway, I attached the screenshot with the instructions from Amaze how to grant access (Amaze opens the standard Files (explorer) to that). Maybe it helps...
edit:
Indeed, dict.cc fails to download to sdcard. But OSMand has no problems at all.
Click to expand...
Click to collapse
G'day mongo0,
thx for the reply.
Will try it either today or tomorrow again.
Might be to say farewell to dict.cc.
Thx buddy for the great work
Installed last version and you are absolutely right.
Access to external SD card works fine except using dict.cc. dict.cc doesn't recognize SD card, for whatever reason.
everything works fine so far.
Single prob I am facing right now is, network connection via SIM card (as you have already written in the main post).
As said before, great work, buddy.
THX and greetz
Immortal rider
Google Camera
I have a problem, I can't install the google camera.
Someone can help me, please ?
Roger Pierrick said:
I have a problem, I can't install the google camera.
Someone can help me, please ?
Click to expand...
Click to collapse
Try Open Camera
Works perfectly with AOSPExtended.
Update (Bugfix)
NFC (somehow) fixed
Immortal rider said:
G'day mongo0,
thx for the reply.
Will try it either today or tomorrow again.
Might be to say farewell to dict.cc.
Thx buddy for the great work
Installed last version and you are absolutely right.
Access to external SD card works fine except using dict.cc. dict.cc doesn't recognize SD card, for whatever reason.
everything works fine so far.
Single prob I am facing right now is, network connection via SIM card (as you have already written in the main post).
As said before, great work, buddy.
THX and greetz
Immortal rider
Click to expand...
Click to collapse
Well, thanks for your feedback. It was also interesting for me to do all the rom compiling..
I probably won't update anymore since it looks like rev. 48 is the final one for Oreo, AEX seems to have stopped updating it, and (some of) the bugs are fixed.
hi; how long did it take you to rom installation ?
Because I wait since 1hour and nothing
Forumeuriste said:
hi; how long did it take you to rom installation ?
Because I wait since 1hour and nothing
Click to expand...
Click to collapse
That's definitely too long; it should only take 5-7 minutes...
Did you make full wipe (Dalvik/ART, Cache, System, Data(, Data on ext_sdcard)) with twrp-3.2.3-0-kminilte?
I found 2 issues:
1.)
Backup in WhatsApp is not working, same like in LineageOS 15.1:
https://forum.xda-developers.com/showpost.php?p=78126440&postcount=480
2.)
The display is flickering when dimmed
Great work @mongo0 :good:
Hey ScRe13
Thanks for your feedback.
I can confirm 1.), however I don't see any flickering.
There are some graphical glitches with apps based on apache cordova., apparently..
I did an update 2018-11-11 (resynced sources)
I might give a try to fix the storage issue too
I have testet 2018-11-11, but the chat backup in WhatsApp is still not working.
But the rest of you build is great:good: Incredible fast 8.1 on Samsung S5 mini
Hope you'll release frequent new builds with the current security updates.
Hello,i have installed the Magisk-v18.1. i have no Root