Hello!
Has anyone seen a disassembly guide / dismantlling guide for an xperia play? I have had a quick look and havent seen one. A video one would be really good and one that looks at the digitizer / glass would be best for me as I seem to have broken mine already, oops!
Cheers
That sucks.
If you have Rogers they have a replacement policy. I would try that before you take it apart. Good luck. I haven't seen any guides yet. It is a pretty new phone.
You have a teardown here, it may be useful: http://www.ubmtechinsights.com/teardowns/sony-xperia-play-teardown/
I have found this, but would still like to see a video if one exists?
http://www.repairyourmobile.net/sony-ericsson-disassembly/sony-ericsson-xperia-play-disassembly/
Cheers
You can get a brand new OEM Sony Ericsson Touch Digitizer Screen on eBay from here: http://cgi.ebay.ca/OEM-Touch-Digiti...ultDomain_0&hash=item27bb11025c#ht_4868wt_905
I just ordered an OEM Xperia PLAY Black Housing Set from them and it's on its way. Funny how those "takedown" photos don't show you how they disconnected the sliding screen from the gamepad base. I got stuck at that part and have no idea how they were able to remove it. LOL
Rogers replacement policy doesn't give you the same model.... They have designated refurbished models available at no cost per person per life... You can only use it once... Unless the customer support was lying to me, that is what she told me.
Sent from my R800i using XDA App
Have you dealt with rogers before? The have no issue flatout lying to your face. I cant tell you how many times I got screwed over by those ****ers. So I get the feeling you'd be SOL
Sent from my R800i using XDA App
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Xperia Play disassembly pictures
Hey,
I am in the middle of taking apart my Xperia Play to replace the screen. Now, I got everything separated and taken apart except the screen half. I am having problem removing these silver rivets, which look like screws with a covering but the covering doesn't peel/come off. I have attached pictures of these in hopes that someone knows how to remove them.
Additionally, if anyone has experience replacing an Xperia Play screen, I'd love the advice.
Thanks in advance.
McD
Screen
Hi
Dont take the rivets OFF! If you just slide the control pad part off the metal casing you can get to the 2 screws you need to get to.
I have just finished replacing my screen and it is the scariest screen i have ever replaced as you need to go from back to front lol
I have attached a pic of my finished product, sorry i should of taken photos during it but i was shaking lol
Flava0ne said:
The only reason I switched over to Rogers was to get the Xperia PLAY for $99.99 on a 3 year agreement. I've been with Fido eversince and even though they're owned by Rogers now, I can say that Fido deals with their customers way better than Rogers does. When my 3 year agreement is done I'm going back with Fido. I already network unlocked my Xperia PLAY so if I still have it by then all I have to do is get a Fido SIM card.
Click to expand...
Click to collapse
I desperately hope that you did not get locked down to a 3 year agreement to just get this phone. As fun as this phone is (and likely to be used long past when I get another phone, just for Emulators and random games), it is not worth a 3 year contract. 2, I can understand. 1 would be more proper. 3 years is nuts in this industry. They have made back their offset of cost within 1.5 years usually.
Video!!
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
eddieo said:
Hi
For anyone else who might benifit from this, here you go:
http://www.youtube.com/watch?v=-3n5ZfkqhzE
Edd
Click to expand...
Click to collapse
Thanks for that video link, I think it'll really help other people who might need to do some repairs on their own to their Xperia PLAY. I just wish that I came across that video earlier when I had to disassemble mines, I was so nervous when I was doing it cause all I had to go by where those pictures posted earlier and it left out a whole lot that I had to figure out myself.
Replacing Digitizer
Hello, Flava0ne
Do I have to take entire phone apart to replace digitizer? Is there simpler way to do it? Screen is fine - only digitizer is broken. Can it be removed from the top or bottom top access only?
Thank you
WOW sorry, too many tabs open. Wrong topic!!!
(Disregard this post)
Two questions: How far can you go without breaking a warranty seal and how many internal water damage indicators / liquid sensors are there? I just need to check since they are threatening $300 if they find anything and I work in the cold and frequently see condensation. I do avoid condensation actively and don't even allow it in the bathroom when showering.
---------- Post added at 03:01 PM ---------- Previous post was at 02:03 PM ----------
OK, I went as far as I dared by completely taking apart the bottom piece (gamepad, camera, microSD slot, SIM slot, headset/remote jack, primary and secondary microphone, antennas, speakers, microUSB, etc) and, so far, I have found three. It was pretty easy up to this point and I didn't notice any kind of warranty seal.
I just removed all T6 screws from the back and lifted the catches along the bottom (headset/microUSB) side using my fingernail. One corner should be loose and you can start there and slide with no marring (didn't need my plastic pry tool). I don't know why, exactly, but the internal L & R switches are stuck to black adhesive films covering openings in this black piece but I was able to lift and unstick them without touching the films. Anyway, when you remove and flip this piece over, you should see a white square just below the mSD and SIM card slot. It's actually visible through a pinhole on the other side. If it's pink/red, you've got a problem, even if it's caused by condensation (they will still void your warranty for "water damage"). When I touched it, a plastic film on the back slipped off but stuck back on. The whole thing seems like it peels off quite easily.
Anyway, I would wiggle the power button loose before moving on. Next, there are now two tiny cross-head screws that I used a PH00x50 driver on. Yes, one of them was clearly accessible as soon as you removed the battery, but why remove it until you are ready to remove both? Once those are out, let the headphone jack dangle off its ribbon cable and lift the PCB enough to disconnect the display connector from the PCB... just stick something wide and flat in there and twist. Be careful not to damage the tiny ribbon cable that connects the touchpad area from the gamepad because it still needs to be disconnected. Now, this is OPPOSITE of how many larger but similar connectors work, so pay attention: To disconnect it, locate the tiny darker-colored flap of plastic on the opposite side of the connector from where the cable goes in. Lift it from the opposite side toward the side where the cable inserts. It will stand straight up and then you can slide the cable out. If you have to remove it, the headphone/remote jack appears to work the same way.
Anyway, this should completely free the PCB and leave the gamepad shell attached to the display. The gamepad shell should be free from the front half of the phone now as well, leaving only the sliding metal mounting bracket.
Now, a couple of interesting things here: I can clearly tell that one of the T6 screws by the volume button was protruding too far and caused a visible sliding scratch on the underside of my top shell. It may make sense to loosen these a bit on a new phone before this happens. You can also see if imperfections in the white Teflon sliding bumps are causing scratches on the front (my first phone did not, my second did in no time).
Now, let's go back to the gamepad faceplate. The buttons should easily fall out if you want them too, but I was only interested in finding the water sensors and here are two more: one is right by the microphone hole and the other in diagonally opposite under the Playstation Certified logo. They look identical to the one on the back piece.
I'm sure that there is at least one in the LCD assembly as well, but mine is well sealed and I didn't want to lift any of those silvery-gray stickers covering the screws when I have a warranty replacement on the way. I've gone far enough to satisfy my curiosity.
---------- Post added at 03:51 PM ---------- Previous post was at 03:01 PM ----------
A couple notes on re-assembly:
As expected, it's a bit more difficult, especially because you don't have leverage to reconnect the display when it is in place. The last fold of the cable it supposed to fit UNDER the metal bracket and the slide mechanism doesn't really work if it isn't (a certain panel will not slide back if it is not folded under). I'm not sure how it affects it but it does. You will need a thin, long, flat utensil like a plastic butter knife or something to either A) provide leverage to connect the connector or B) tuck the cable back under the bracket after connecting it. You need to have already connected the touchpads and oriented the gamepad faceplate around/under the bracket, though it will not be secured. The phone also needs to be in the open position. When you tuck the cable under, slide it to the closed position and back. If the cable seated properly, the PCB and gamepad faceplate should sit pretty flat and should no longer be falling off of the bracket even though it isn't really secured.
The D-pad needs to be arranged properly as well. One side is cut. If you look closely, there are three holes in the four inner corners that align with three plus-shaped pegs, so you can't get it wrong if you pay attention.
The power/lock button isn't going to stay in place until you secure the bottom housing, so leave it off until just before you are ready to do that to avoid losing it.
Be careful not to seal dust in the camera lens. Don't forget to put the cross-head screws back before you do the back housing because you can't easily access one. Remember to keep the four black screws by the L, R, and volume buttons a little loose if you had a problem with them scratching the other half of the phone.
Be sure to download the Xperia Play test program from the Google Market and verify that all buttons and touch inputs function properly.
I'll be sure to wear my Looxcie next time.
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Hogwarts said:
I feel sorry for you blokes taking apart the xperia
it's going to be a royal pain in the ass. especially when you reach that "point"
the point where you have **** all over the table and you are like god how did i get this deep into disassembly
then the part when you are shaking / nervous about breaking a part, or worse yet. you end up breaking it. i would be real scared lol.
all i can say is go real slow. REAL slow
and if anything wont move. dont force it lol
Click to expand...
Click to collapse
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
CZroe said:
Maybe I've just taken apart too many laptops and gadgets before but I never felt that way when I got the back piece completely apart... or maybe "that point" is only after you get into the front assembly. I did the rear in bed with the screws laying on the covers beside me and didn't even lose the arrangement of a single one.
Anyway, moments after getting my RMA replacement shipped email notification this morning, I dropped my R800at that is supposed to be getting sent back and now the touch digitizer is shattered. I've ordered a replacement but I'm hoping that I'll be sending it back with the original from the RMA replacement. Does anyone know if the R800a or R800at will fit a R800 Z1i chassis? These are all over eBay. Also, is there any tamper seal? I understand that there are screws under the silver/gray stickers on the front piece but those look easy enough to reapply.
Did I mention that they wanted to turn my RMA down for the flaking paint on the front buttons alone? The night before I called to RMA for an alarm issue (two days ago), the battery door cracked right at the pry point. I remove it more often than most because I carry a second official battery and a Sony Ericsson EP900 charger, so it failed under normal wear-and-tear, but they wanted to say that I couldn't RMA for my main issue (alarm dismisses itself) because of that EVEN THOUGH THE RMA UNITS DON'T INCLUDE A BATTERY COVER!
Damn. Sony Ericsson can be picky. I babied the thing and only just now dropped it. Perhaps AT&T is a little too cautious with the terms of Sony's warranty (it is processed through them but the rules come from Sony).
Click to expand...
Click to collapse
I've always said this phone is cheaply made and now i have more proof
mine came brand new out of the box with a blemish on the screen
I'm not picky so i just kept it.
Its a blemish in the LCD screen not the digitizer or glass
and yeah the cheap ass plastic assembly is not helping either.
they should have used aluminum or something. more durable
OK, so I finished the job. I did not see any more water indicators in the top shell and I did not find a single tamper-resistant label in the entire device. I left the slider assembly intact (I think it's riveted) and I didn't peel the flex PCB out of the top shell or off of the touchoads, but it was what anyone would consider "fully disassembled." I seem to have misplaced my camera but video will be coming when I find and edit it.
Hi everyone.
I accidentally dropped my phone as I was getting out of my car (damn that new coat with all it's pockets!).
Now I noticed that at full volume, the speaker is really hard to understand, and at about 1/3 volume it becomes clearer- but the person becomes harder to hear in terms of loudness.
At full volume it's as though the person on the other side is talking with their lips on the mic and really loudly.
Does anyone know if it's possible to replace the speaker, or what could have caused this? I am familiar with taking the phone apart. I've done it a number of times, but I'm just wondering if it even makes sense to try at this point.
thnx
EDIT: I found this.
http://www.repairsuniverse.com/htc-desire-z-earpiece-speaker-replacement.html
anyone install one of these? requires desoldering, I guess?
I dont think it requires anything really besides opening. I believe that when I swapped my spring the speaker is on the back side of the phone and the entire motherboard is seperate on front side.
thanks scott.
you're correct. no soldering. it has two spring-bent type contacts and it looks like there is a metal bracket around the speaker that has 4 indentations to hold the speaker down over 4 small cavities in the speaker body.
should be easy.
and i found it for 2 bucks to boot!
Yea, replacing the speaker is very easy. First take off the back (4 screws) and then I think there is one more screw to get the speaker loose. But I don't remember exactly. Might be none.
I had to replace the screen and digitiser on my TP2 after shutting it in the boot of a car (clever huh?). I accomplished the swap surprisingly easily after buying a pre-built screen and digitiser from Hong Kong for about £25. It even came with a spudger to help me take it apart I followed a few guides, including this iFixit one, which greatly helped.
Frustratingly though after putting it all back together and making a test call, the earpiece rattles during calls. Not a lot, but enough to make me want to fix it; applying gentle pressure to a certain top part of the bezel reduces the rattle a little bit but I've taken it apart three times and taped up various sections now to see if stops the problem. Unfortunately, no such luck.
Is the earpiece rattle something to do with inadequate insulation (or the ribbon cable running down the back of the screen)? Everything's sandwiched in pretty tight and I've reapplied electrical tape to what I think are the key areas. I've also padded the top area where the earpiece comes through the metal mesh and I've stuck the mesh down with doublesided tape so it can't move about. The problem persists though...
Everything else works fine, and the speaker also works perfectly with no vibrations or rattles (even though I also took that bit apart to inspect it) so I can't figure out why just the earpiece is rattling. Anybody taken their Touch Pro2 apart, had the same problem and solved it?
I have torn apart probably 3-4 TP2 screens and never had anything rattle. Did you lose a screw in there by chance? That is the only thing that would be small enough to rattle in there I think.
The only other thing I could thing that it might be is a bad connection to the vibrator motor. Maybe you have the little ribbon cable pinched or a bit off the socket it fits in.
So my screen got busted, Long story short, if your glass cracks, don't put off the $15 replacement cost, because eventually it'll crack the LCD also. I sourced a Sprint S3 LCD, mint condition, for less than the cost of the insurance deductable.
I do a lot of DIY repairs so this sort of thing is normal for me, but be advised this isn't for the squeamish or for someone who doesn't have a steady hand. You have to mill/grind/wish away aluminum, sometimes to within a thousandth, of pcb flex cable. One blink and you could ruin the whole thing. If you go too deep, you'll cut into the LCD and its assembly. So.. be warned.
This isn't a guide, just a picture to show you what I did. I compared the two subframes for awhile and marked what I needed to grind away. I found out later there was some more I needed to grind, so I eventually just ground away a lot of the mass just so I didn't have to keep checking fitment.
Once fitment was just right I put new thermal tape in place of the stuff that got damaged, and assembled everything. It booted up like a charm. The rear case doesn't fit as well, there's a plastic difference between it and the Sprint rear case. I just ground away the plastic to make it fit. A Sprint rear case would fit fine.
The metal I ground away is the 'shiny' stuff, but to be specific, I highlighted it in a thin pink line. Tools used were a blow gun and a dremel with a cutting disc and a stone grinding point. I used painter's tape to mask off areas I didn't want crud going in, specifically the cable connectors and front camera and LED port. Also eye and ear protection (earbuds with music of course). Took about 2 hours.
For this particular swap you will be left over with one screw. The black screw at the bottom which holds the pcb to the frame on the AT&T model doesn't exist on the Sprint model. I didn't feel like drilling/tapping, so I just left it out.
So if you need an LCD and happen upon one from another brand for less, you might just be in luck. Hope this helps someone, or gives a good 5 minute read on a lunch break.