I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
You brought a aftermarket unit that differs to the factory unit and expect it to operate with the same feature set, is that correct?
Also, what did the reseller suggest you do?
I am looking for a feature that might be exposed differently, or that could be accessed in a different manner (such as ODB software). The original HU was changing settings for the car/camera, but I reckon they are stored elsewhere, because the original camera still works with the new system.
The reseller told me to check the vehicle app that comes with the unit, but that does not have such settings.
adicrl said:
I am looking for a feature that might be exposed differently, or that could be accessed in a different manner (such as ODB software). The original HU was changing settings for the car/camera, but I reckon they are stored elsewhere, because the original camera still works with the new system.
The reseller told me to check the vehicle app that comes with the unit, but that does not have such settings.
Click to expand...
Click to collapse
No all the stock features are included into the aftermarket custom unit...
In my case...for mazda vehicles ... the menus where included...
That's the price to pay for going to aftermarket solutions (not necessary for one brand or other aftermarket...but aftermarket in general)
Enviado desde mi SM-G975F mediante Tapatalk
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
I also have one of the units but for a Toyota Corolla, so your settings might be similar or different to mine. But I went to Settings > CAR > Extra Settings > then there's an option for Reversing Trajectory Display set that to on. I never had this on my stock unit just the stock non moving lines. I will admit it's not integrated with the lines from the camera as it in it's another set that moves by itself, but it's still better than not having them.
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
My guess is the camera itself has a cpu that handle these, so in order to access the menu you need to reconnect the old headunit.
Related
I connected my Bluetooth mini keyboard with Touchpad to the Note and I am happy to report it works perfectly. Volume control, touchpad mouse etc all work fine.
I bought mine from Tigerdirect. Mine is labelled as "Ultra eXo Bluetooth Mini Keyboard with Touchpad," however it appears to be exactly the same as the one in the link below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=6413789&CatId=537
Can you please tell me what are the uses and HOW OFTEN you will use?
Does it have buttons mapped to the Menu, Home, Back, and Search keys?
OP - I hope Tiger Direct accepts returns, because they overcharged you, BIG TIME. Get it from Amazon instead for less then half http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846
I have one from dealextreme (brand name Rii)
I'm using it when I'm connected to the work via Juniper SSLVPN. And I have a cheepo Galaxy Note mini holder... (from ebay, below $3) awesome
Meethere - The keyboard like this is great for business presentations. Connect the phone to hdmi and control from a distance. It has a laser pointer as well. I won't use it often but it will be very handy when I need it.
Xetaray - There are buttons mapped to menu, back and home. I never tried to find one for search. I will connect it again later and tell you.
Anymal - Amazon is cheaper, yeah, but shipping, and customs import duty and customs brokerage. Everyone on these forums is not in the USA. It was a spur of the moment purchase for a different device and I am sure $90 isn't going to make any difference to me. If I was going to go return it and then reorder, how much is my time worth? More than that. But thanks for pointing it out, very nice of you.
MagentaJoe said:
Meethere - The keyboard like this is great for business presentations. Connect the phone to hdmi and control from a distance. It has a laser pointer as well. I won't use it often but it will be very handy when I need it.
Xetaray - There are buttons mapped to menu, back and home. I never tried to find one for search. I will connect it again later and tell you.
Anymal - Amazon is cheaper, yeah, but shipping, and customs import duty and customs brokerage. Everyone on these forums is not in the USA. It was a spur of the moment purchase for a different device and I am sure $90 isn't going to make any difference to me. If I was going to go return it and then reorder, how much is my time worth? More than that. But thanks for pointing it out, very nice of you.
Click to expand...
Click to collapse
Well, I did not know you're outside US, sorry
Mapped Keys
I had a chance to experiment for a few minutes, here are my results:
tab = search
esc = home
f1 = menu
f3 = voice command
f4 = power
right mouse = back
left mouse = select
Is there any chance to remap these?
8?
good option if you use the phone a lot. Not for me
Dealextreme's worldwide shipping is free...
Sent from my GT-N7000 using XDA App
Nice keyboard. Don't bother with the $30 knockoffs...they are either knockoffs or the older ver1.9 that you do not want. Thanks for making me aware of this keyboard OP
Anyone ever try this btkb? It folds up and has a place to set the phone in...
http://www.amazon.com/dp/B0002OKCXE
mscion said:
Anyone ever try this btkb? It folds up and has a place to set the phone in...
http://www.amazon.com/dp/B0002OKCXE
Click to expand...
Click to collapse
If you want a fold up btkb I suggest Freedom Pro over your link
Here is the same keyboard sold/fulfilled by Amazon for $44. Free super saver shipping applies. It says it's made by VisionTek which is a more reputable company (in my mind) compared to SiTouch which I've never heard of.
VisionTek CANDYBOARD Bluetooth Wireless Mini Keyboard with Touchpad 900335 (Black)
http://www.amazon.com/dp/B004FI841K/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
I use a Freedom Pro keyboard when I travel to be able to type up documents and emails comfortably. I plan to use the VisionTek keyboard at home.
EDIT: Only one left in stock. Make sure to choose Bluetooth style.
http://www.visiontek.com/accessories/candyboard-bluetooth.html
MagentaJoe said:
I connected my Bluetooth mini keyboard with Touchpad to the Note and I am happy to report it works perfectly. Volume control, touchpad mouse etc all work fine.
I bought mine from Tigerdirect. Mine is labelled as "Ultra eXo Bluetooth Mini Keyboard with Touchpad," however it appears to be exactly the same as the one in the link below.
Click to expand...
Click to collapse
I just bought the same thing from tigerdirect, it works fine with my laptop. But I install the android.apk on the phone and when i try to activate the driver, it says:
"Activation failed. Please retry before using this software.
Application will now close."
I could use some help.
Did you allow installation from external sources in Settings -> Applications?
If so, did you also reboot and enable the keyboard under Settings -> Languages & Keyboards?
---------- Post added at 01:50 PM ---------- Previous post was at 01:46 PM ----------
mscion said:
Anyone ever try this btkb? It folds up and has a place to set the phone in...
http://www.amazon.com/dp/B0002OKCXE
Click to expand...
Click to collapse
I don't have that keyboard, but I have a similar foldable with an integrated stand that only cost 1/4 of the iGo. That is a ridiculous price for a phone accessory. I'm sure you can find it for a lot less from other sources than Amazon.
nice
Kumabjorn said:
Did you allow installation from external sources in Settings -> Applications?
If so, did you also reboot and enable the keyboard under Settings -> Languages & Keyboards?
Click to expand...
Click to collapse
I'm on ICS. I have unknown sources checked under "Security" in Settings. The Bluetooth Keyboard isn't showing up with the others under "Languages and Input".
It still keeps giving the same error message. I open the driver app, it says to authenticate, and the error message comes up immediately...as if it didn't even try to connect to Ultra's servers.
vhanna said:
I'm on ICS. I have unknown sources checked under "Security" in Settings. The Bluetooth Keyboard isn't showing up with the others under "Languages and Input".
It still keeps giving the same error message. I open the driver app, it says to authenticate, and the error message comes up immediately...as if it didn't even try to connect to Ultra's servers.
Click to expand...
Click to collapse
Without doin anything else, make your keyboard discoverable, go into Settings -> Wireless -> Bluetooth settings and do a Search for Bluetooth Devices. Make sure the keyboard is showing and then do a pairing.
After that set you keyboard to the phone's standard keyboard, go into a note taking (or Messenger) application, start to write with the on screen keyboard. If that works then try to write with the Bluetooth keyboard. If that doesn't work, tap on the screen until the inset cursor (usually with a blue arrow) appears, pusch Ctrl+Shift and then try to type. Shouldn't that work try Ctrl+Space instead.
This is a review of TaoTronics mobile 900 dpi cordless handheld scanner. http://www.amazon.com/TaoTronics®-Handheld-Handyscan-Selection-Insertion/dp/B00B9A0HNA/
Like most of the people with smartphones, when I'm on a go and need to "save" an image or a text from a magazine or a book - I take a quick snapshot picture. Of course the problem is that to capture a full 8.5"x10" page you need to zoom out or take snapshots of different parts of the page. Often, you can't even get an even focus for the entire page left to right. Trying all those so-called phone camera scanner apps never yielded good results for me. That is why I was really excited to try out a mobile scanner from TaoTronics, and also trying to see how it will integrate with my Note 2.
In it's true mobile fashion, the scanner is very compact being about 10" in length and about 1" x 1" in width/height. With an addition of two AA batteries to power it up, all together it weighted about 7 oz. I know, it's almost weird to think there are gadgets today that use batteries. The advantage of that is as long as you have spares with you - you don't have to worry about how much charge is left. But the most important advantage is that you roll this scanner over a surface you're trying to capture/scan, so additional weight is actually to your benefit in order to keep it balanced when rolling/scanning. Also it comes with a very nice storage bag. The effective scanning area is in 8.5" in width thus it's designed to handle a typical A4 size page, although you are not limited since you can do multiple scans of wider area. The scanning resolution comes in 3 setting of low/mid/high which corresponds to 300/600/900 dpi where you can decide a quality of scan versus the file size. You also get an option to save it as JPG or PDF, great for when you scanning pictures versus text. The beautify of this scanner - you don't need any program to capture jpg or pdf. It has a slot for micro-sd card and everything you scan gets converted and stored automatically on that card, a truly mobile solution!
Scanning process was very easy. Before I started, I had to run calibration scan for white balance (scan a piece of white paper, already included in the package for convenience). Then, all you have to do is to press Scan button, wait for green led to turn on, roll the scanner over the surface, and press Scan button again. After that, image gets saved instantaneously on micro-sd card and you see on LCD screen an incremented counter of saved images. Fast, easy, and very convenient. While running the scan, I got an occasional error led light (red indicator) which suppose to guide you so you don't scan to fasts, etc. But that didn't affect quality of the images - everything turned out to be scanned very nicely with clear details. Once scan is done, you can either take the card out for copying/viewing, or connect the scanner to your laptop through mini-usb port (usb cable is included in the box), or MY FAVORITE option - hook it up to your phone through OTG cable which recognizes the scanner as external usb storage device and view or copy pictures to your phone. The last option was just an icing on the cake which raised the value of this scanner to the next level of mobile portability!!!
Overall, if you find yourself in need to save documents or pictures or receipts or anything else that requires a detailed scanning of documents or magazines or books in width of up to 8.5", and to be able to view and to copy it directly to your smartphone on a go - there is NO better choice than this little portable scanner which you might as well just call "a scanning wand" Also, if you look at any other competitive scanner on the market (I did a search on amazon), you will not be able to find anything with a true cordless portability and 900 dpi resolution in this price range - so it also a really good value!
Here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can use Camscanner app, it using back camera to capture and save as pdf documents, it also can auto fix distor and remove blank area....
Sent from my GT-N7100 using xda app-developers app
The camera on the note2 is 8mp. Ive never had an issue "scanning" legal documents using it. Its more than clear enough for my real estate agent and my lawyer..... reprints look identical to original after cropping. No need to paste several images together. Align the cam with the full page and snap the pic. Its sharp enough to read the little numbers on printed circuit boards / resistors once zoomed in.
Sent from my SGH-T889 using xda app-developers app
is the 900DPI scanner compatible with my macAir, osx 10.9.5?
VW cars that have right hand controls from factory, are those buttons able to send CAN signals to the radio?
My car came only with the controls on the left. They function as intended. I have retrofitted the right hand controls and seem to be functional, I'm able to change the dash display. No VCDS coding was done for this to work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to control the Android HU with the right side SWCs. Using CarService or logcat, I can see that no button presses are seen by the head unit. I'm trying to determine if some VCDS coding is needed (Don't have a VCDS cable yet) or that if this can bus option is just not possible. Thanks for any information.
*Title redundancy has been noted
Hi,
I do have the same SWC on my 2010 Seat Altea (Seat brand in the VW group in EU), but the keys icons are a little different. I tried to make the keys on the right side working but without success on my JY unit.
I have VCDS and was looking for a coding but without success.
I emailed Joying about this issue, but it seems that the CANBus decoder is the real part of the problem.
The layout with the CANBus box on Android units seems to be :
Left keys :
- Up & Down for VOL+ & VOL-
- Arrow keys for Prev & Next preset on the radio or track on any music app (original is for radio seek and prev / next track on CD but not sure)
- Phone key opens the BT app on long press, or answer & end call on short press
- The mic is used for mute
Right keys :
- Up & Down for dash display control
- Left & right are useless and not functional at all (you have some little squares, i do have some double arrows left & right; original is for radio switching in presets and fast forward / backward on CD but not sure)
- OK is for the dash display control
- Bottom key opens the BT app in my car, maybe different on yours because it's not a 'back' logo on mine
Remaping with the internal app doesn't work and is useless with CANBus decoders, and as you said, CarService doesn't detect key presses. I don't know if there is a software which handles the decoder or if everything is inside this box... After looking in different threads, seems that all cars in VW group with SWC have this issue. Sorry no help, but maybe some people with more knowledge will be able to help us.
Thanks, was hoping to hear from someone that has explored VCDS coding before I went down that rabbit hole.
So it's possible that the CAN decoder is too "dumb"? I'm wondering if a Joycon unit can add some flexibility of options.
http://www.rcjoycon.com/base_3/menu...e1=&com_board_search_value2=&com_board_page=&
My last resort option is to rewire the the right SWC buttons to the IR remote that came with the Joying head unit. The IR remote PCB will be housed in the steering wheel with the IR emiter just poking out the side. Initial testing seem promising, has just enough line of sight to work.
Before a hardware mod, I think it might be interesting to get back on VCDS and do more searches.
I was able to test an other headunit in my car, the DNX520VBT from Kenwood. Not an android one, seems to be a WinCE or something even more software closed.
There is with this unit a CANBus box similar to those that we have. After all the wiring done, same thing again : the right arrows keys are unresponsive.
After some web searches, I found that : http://www.seatcupra.net/forums/showthread.php?t=317369
This page concerns the Kenwood unit. On page 3, #57 & #58 replies are interesting. For the same brand cars but different models, the results for the SWC are different and are the same as our issues.
I think it could be interesting to dig again on VCDS to know if there is something with those controls...
I bet the controls on the right are only linked to the dashboard commands so you won't be able to use them on your head unit. Maybe unless you connect additional wires to the buttons an directly to key 1 or key 2 signal of the HU as long as the buttons work via resistances.
The added, right side controls send signals to the radio. The Canbus decoder box just doesn't understand them. All of that was solved with the Joycon device posted above. It intercepts my SWC and mimics them as a HW keyboard connected to the Android HU. When used with Xposed Additions, the options are almost limitless. A single button can have multiple functions, double tap, double tap hold, triple tap, and etc. All of this is with application context too, SWC functions change based on what app is running. It's very nice, just can't remember what they all do.
carter.w.jason said:
The added, right side controls send signals to the radio. The Canbus decoder box just doesn't understand them. All of that was solved with the Joycon device posted above. It intercepts my SWC and mimics them as a HW keyboard connected to the Android HU. When used with Xposed Additions, the options are almost limitless. A single button can have multiple functions, double tap, double tap hold, triple tap, and etc. All of this is with application context too, SWC functions change based on what app is running. It's very nice, just can't remember what they all do.
Click to expand...
Click to collapse
That sounds good.
So you can use both remote controls left and right with your unit? Is there no double input because of the canbus signals to the android unit?
Do the right controls still work with the dashboard settings? How can you switch from dashboard to HU control?
So you can use both remote controls left and right with your unit? Is there no double input because of the canbus signals to the android unit?
Click to expand...
Click to collapse
Yes, both sides can be used. Double input does happen. You have to craft your setup around it. For example, the volume down key could be left stock. Then have the Joycon system look for a tap and hold, for mute. Most of my left side controls are stock/mtc-key functions, right side used for the Xposed Additions stuff.
Do the right controls still work with the dashboard settings? How can you switch from dashboard to HU control?
Click to expand...
Click to collapse
The retrofitted, right controls only replicate the buttons on the right stalk. After car start I can use RH SWC to change dash info. If I use the original stalk buttons, the SWC will no longer work for dash info but continue to work for the HU. You can avoid mapping the OK button to avoid any big issues with dash settings....or tap the stalk controls every time you start. I've been lazily looking into having this by default, still have no VCDS cable.
Hi,
I've installed a new android headunit today. Running android 7.1 out of the box.
I have a few problems with it and a few thing I'd like to know how you do it.
Problems:
- Not all buttons work like they should. Temperature adjusting works fine but changing the air outlet on the passengers side doesn't.
- The car settings app is doesn't work. The toggles go from on to off and back...
Question:
- I'd like to use bluetooth tethering for internet, but that doesn't seem to work. the bluetooth settings look different and I can't choose to use the internet connection. Usb tethering would be a great alternative but I don't thing its available.
The only other option would be to use the wifi hotspot but I hate the fact that I need to switch it on and off all the time.
Hopefully you have a solution for these problems.
Thanks, Frans
I've just installed an Erisin head unit with Android 7.1 in my VW Passat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My solution for tethering was to use the wifi hotspot on my Nexus 5X. I've used Automate to enable/disable the hotspot when my phone connects/disconnects to Bluetooth so I don't have to switch it on and off all the time.
Overall I'm pretty happy with it. Everything works as it should. I've replaced the default launcher with Car Launcher Pro which seems to be the only car launcher specifically designed for use on an Android head unit rather than a phone. I think it looks a lot better than the default one.
I've installed Waze and Spotify which are now linked together so I can switch between the two really easily. I'm using TuneIn for the radio, but my mobile signal sometimes drops out so I'm tempted to buy the additional DAB unit.
The only real issue I'm having is some slight buzzing interference when the engine is running. It's not terrible but I'll be looking into how I can earth the head unit better to try and suppress it.
Hi,
Do you have found a solution for this problems?
I'm thinking buy an Android head unit for my Peugeot 407, but I'm afraid that many options doesn't work, without original screen...
Hi guys,
I've changed the oem Head-Unit of my Peugeot 407 with a new PX3 with Android 7.1 and all main functions of the original system are ok.
Original Head-Unit was a WipNav (RNeg) with a 7" color display.
Now with the new Head-Unit set I can controll the dual zone clima (all controlls, pilot and passenger) and consumption indicator.
Some pictures at below...
What's your problem for the controls or buttons?
Clima app...
http://img.techpowerup.org/180121/screenshot-2018-01-21-130859.jpg
Consumption indicator
http://img.techpowerup.org/180121/screenshot-2018-01-21-130911.jpg
Main page
http://img.techpowerup.org/180121/screenshot-2018-01-21-130321.jpg
When I push a button of the clima control
Hi trudtilp
Thanks for the photos.
I appreciate if you can answer a few questions:
- The unit, show external temperature, as the original screen show?
- Are the car messages displayed? Like "Low exterior temperature", "Front left seatbelt open", "Doors open", "right headlamp failure", "esp malfunction", ...?
- Original parking sensors are working? Beep and graphics or only beep?
Thanks in advance!
Hello everyone, I'm very interested in this because I would also like to install a head unit: the latest version androïd 8 on my Citroën C5 (RC_) (of course the screen should be adapted ...)
I ask myself some questions also about the sensors of recoil because the car has 8!
I know there are interfaces (look for "DanyMecano" on Youtube) but no way to know if this interface can accept as many sensors
And finally, my car is equipped with amplified JBL sound ... I saw that there were JBL CanBus decoders for Toyota (Aliexpress) but again, nothing for Peugeot 407 (or C5 with the same configuration)...
I'm French so I use the Google translation and I apologize if you do not understand everything!
Signature 60 said:
my car is equipped with amplified JBL sound
Click to expand...
Click to collapse
As I know, JBL sound on Peugeot 407, works great with any canbus, also with the old versions that do not support reverse parking sensors. In a Spanish forum, there are an user who confirm that.
Ok I'll watch this thank you very much
#EDIT:
Do you have a link please?
I just watched 10 pages in Spanish language and I did not find anything ...
Hello everyone!
I found some information ... In ".es" as Peixeiro said!
A sale (too expensive) but the first info is very clear! :
"With this equipment, functions are not lost.
The steering wheel controls, vehicle information, parking sensors, climate, even the JBL system are retained.
With Android 7.1"
I also found a Chinese seller (Seicane) who gives an interesting info in his description, it say:
"Please note: this unit only can support your original car's reversing radar if your car's origin CD is a small screen less than 4.3 inch, then this unit can't support your car's reversing radar."
Below there is a photo of the RD4...
So i have Dasaita unit for Outlander, Android 8.0 PX5 8-core, 4gb Ram, 32Gb Rom, 8"
My question is does anyone else have managed to some how change car settings throw this device, settings, like light, wipers sensitivity, door locks, folding mirrors etc.? Or is there any other option-throw ODB2? Those settings are available in original unit.
And my second question is, can I adjust rear camera guidelines, because lines what i have with factory camera to dasaita unit are off. Have gone throw all reversing settings and no options found. In the settings there are option to see also active guidelines but it is always curved to one side and not moving as i turn my wheel.
Thanks!
I haven't done this myself, I am actually looking at installing a similar device in my outlander y14, but I understand with a OBD2 Bluetooth device and the mitsubishi Phev app installed on the head unit you can access the car functions... I'm not sure the mitsu app works on android 9 though.
Sent from my Pixel 3 XL using Tapatalk
Sidamp said:
So i have Dasaita unit for Outlander, Android 8.0 PX5 8-core, 4gb Ram, 32Gb Rom, 8"
My question is does anyone else have managed to some how change car settings throw this device, settings, like light, wipers sensitivity, door locks, folding mirrors etc.? Or is there any other option-throw ODB2? Those settings are available in original unit.
And my second question is, can I adjust rear camera guidelines, because lines what i have with factory camera to dasaita unit are off. Have gone throw all reversing settings and no options found. In the settings there are option to see also active guidelines but it is always curved to one side and not moving as i turn my wheel.
Thanks!
Click to expand...
Click to collapse
Hi, did you manage to fix it ? I have the same issue here, with Outlander 2014 and PX6. The seller is responding very slow...
Thanks.
Alexandru.nae said:
Hi, did you manage to fix it ? I have the same issue here, with Outlander 2014 and PX6. The seller is responding very slow...
Thanks.
Click to expand...
Click to collapse
No unfortunately not. But what I noticed is that I'm having Control settings app on my head unit and it have exactly the needed settings in it, problem is that those are greyed out or when touching only sound will heard but can not change anything. The app itself is coming from CAN bus. I didn't install it myself. I have choose canbus nr. 57 for Outlander, if I change it to 111 (another canbus for Mitsubishi) then the app disappears. So there is something that looks promising, but it does not work. Might be that it needs some more steps to do in Factory settings (in canbus and under other), there are some type0,1,2,3 that can be changed. Tested those also, but changing under other type 3 it messed up my screen, it was in vertical, managed to fix it with attached mouse and keyboard.
Sidamp said:
No unfortunately not. But what I noticed is that I'm having Control settings app on my head unit and it have exactly the needed settings in it, problem is that those are greyed out or when touching only sound will heard but can not change anything. The app itself is coming from CAN bus. I didn't install it myself. I have choose canbus nr. 57 for Outlander, if I change it to 111 (another canbus for Mitsubishi) then the app disappears. So there is something that looks promising, but it does not work. Might be that it needs some more steps to do in Factory settings (in canbus and under other), there are some type0,1,2,3 that can be changed. Tested those also, but changing under other type 3 it messed up my screen, it was in vertical, managed to fix it with attached mouse and keyboard.
Click to expand...
Click to collapse
I managed to fix it. Long story short, they are executing the operation but they are not refreshing the Status of the command. You need to move the image to make a refresh. After you quit the app, the executed commands remain, but no feedback.
Alexandru.nae said:
I managed to fix it. Long story short, they are executing the operation but they are not refreshing the Status of the command. You need to move the image to make a refresh. After you quit the app, the executed commands remain, but no feedback.
Click to expand...
Click to collapse
I will try it, how You move image, holding and moving? I could not change slide buttons or add some tick to any checkbox.
Yep, press and hold the screen, move up or down the image untill the settings changed disappear, and the bring it back.
P.S. my canbus is MT SS 07 and I am runing the latest firmware on the unit.
Alexandru.nae said:
P.S. my canbus is MT SS 07 and I am runing the latest firmware on the unit.
Click to expand...
Click to collapse
Might be then I habe some other canbus version/firmware. Pressing and holding the screen change anything. But thaks for comments!
Sidamp said:
Might be then I habe some other canbus version/firmware. Pressing and holding the screen change anything. But thaks for comments!
Click to expand...
Click to collapse
Alexandru.nae said:
Yep, press and hold the screen, move up or down the image untill the settings changed disappear, and the bring it back.
Click to expand...
Click to collapse
Btw what is your canbus settings( type1,2 or 3?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}