So i have Dasaita unit for Outlander, Android 8.0 PX5 8-core, 4gb Ram, 32Gb Rom, 8"
My question is does anyone else have managed to some how change car settings throw this device, settings, like light, wipers sensitivity, door locks, folding mirrors etc.? Or is there any other option-throw ODB2? Those settings are available in original unit.
And my second question is, can I adjust rear camera guidelines, because lines what i have with factory camera to dasaita unit are off. Have gone throw all reversing settings and no options found. In the settings there are option to see also active guidelines but it is always curved to one side and not moving as i turn my wheel.
Thanks!
I haven't done this myself, I am actually looking at installing a similar device in my outlander y14, but I understand with a OBD2 Bluetooth device and the mitsubishi Phev app installed on the head unit you can access the car functions... I'm not sure the mitsu app works on android 9 though.
Sent from my Pixel 3 XL using Tapatalk
Sidamp said:
So i have Dasaita unit for Outlander, Android 8.0 PX5 8-core, 4gb Ram, 32Gb Rom, 8"
My question is does anyone else have managed to some how change car settings throw this device, settings, like light, wipers sensitivity, door locks, folding mirrors etc.? Or is there any other option-throw ODB2? Those settings are available in original unit.
And my second question is, can I adjust rear camera guidelines, because lines what i have with factory camera to dasaita unit are off. Have gone throw all reversing settings and no options found. In the settings there are option to see also active guidelines but it is always curved to one side and not moving as i turn my wheel.
Thanks!
Click to expand...
Click to collapse
Hi, did you manage to fix it ? I have the same issue here, with Outlander 2014 and PX6. The seller is responding very slow...
Thanks.
Alexandru.nae said:
Hi, did you manage to fix it ? I have the same issue here, with Outlander 2014 and PX6. The seller is responding very slow...
Thanks.
Click to expand...
Click to collapse
No unfortunately not. But what I noticed is that I'm having Control settings app on my head unit and it have exactly the needed settings in it, problem is that those are greyed out or when touching only sound will heard but can not change anything. The app itself is coming from CAN bus. I didn't install it myself. I have choose canbus nr. 57 for Outlander, if I change it to 111 (another canbus for Mitsubishi) then the app disappears. So there is something that looks promising, but it does not work. Might be that it needs some more steps to do in Factory settings (in canbus and under other), there are some type0,1,2,3 that can be changed. Tested those also, but changing under other type 3 it messed up my screen, it was in vertical, managed to fix it with attached mouse and keyboard.
Sidamp said:
No unfortunately not. But what I noticed is that I'm having Control settings app on my head unit and it have exactly the needed settings in it, problem is that those are greyed out or when touching only sound will heard but can not change anything. The app itself is coming from CAN bus. I didn't install it myself. I have choose canbus nr. 57 for Outlander, if I change it to 111 (another canbus for Mitsubishi) then the app disappears. So there is something that looks promising, but it does not work. Might be that it needs some more steps to do in Factory settings (in canbus and under other), there are some type0,1,2,3 that can be changed. Tested those also, but changing under other type 3 it messed up my screen, it was in vertical, managed to fix it with attached mouse and keyboard.
Click to expand...
Click to collapse
I managed to fix it. Long story short, they are executing the operation but they are not refreshing the Status of the command. You need to move the image to make a refresh. After you quit the app, the executed commands remain, but no feedback.
Alexandru.nae said:
I managed to fix it. Long story short, they are executing the operation but they are not refreshing the Status of the command. You need to move the image to make a refresh. After you quit the app, the executed commands remain, but no feedback.
Click to expand...
Click to collapse
I will try it, how You move image, holding and moving? I could not change slide buttons or add some tick to any checkbox.
Yep, press and hold the screen, move up or down the image untill the settings changed disappear, and the bring it back.
P.S. my canbus is MT SS 07 and I am runing the latest firmware on the unit.
Alexandru.nae said:
P.S. my canbus is MT SS 07 and I am runing the latest firmware on the unit.
Click to expand...
Click to collapse
Might be then I habe some other canbus version/firmware. Pressing and holding the screen change anything. But thaks for comments!
Sidamp said:
Might be then I habe some other canbus version/firmware. Pressing and holding the screen change anything. But thaks for comments!
Click to expand...
Click to collapse
Alexandru.nae said:
Yep, press and hold the screen, move up or down the image untill the settings changed disappear, and the bring it back.
Click to expand...
Click to collapse
Btw what is your canbus settings( type1,2 or 3?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
VW cars that have right hand controls from factory, are those buttons able to send CAN signals to the radio?
My car came only with the controls on the left. They function as intended. I have retrofitted the right hand controls and seem to be functional, I'm able to change the dash display. No VCDS coding was done for this to work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to control the Android HU with the right side SWCs. Using CarService or logcat, I can see that no button presses are seen by the head unit. I'm trying to determine if some VCDS coding is needed (Don't have a VCDS cable yet) or that if this can bus option is just not possible. Thanks for any information.
*Title redundancy has been noted
Hi,
I do have the same SWC on my 2010 Seat Altea (Seat brand in the VW group in EU), but the keys icons are a little different. I tried to make the keys on the right side working but without success on my JY unit.
I have VCDS and was looking for a coding but without success.
I emailed Joying about this issue, but it seems that the CANBus decoder is the real part of the problem.
The layout with the CANBus box on Android units seems to be :
Left keys :
- Up & Down for VOL+ & VOL-
- Arrow keys for Prev & Next preset on the radio or track on any music app (original is for radio seek and prev / next track on CD but not sure)
- Phone key opens the BT app on long press, or answer & end call on short press
- The mic is used for mute
Right keys :
- Up & Down for dash display control
- Left & right are useless and not functional at all (you have some little squares, i do have some double arrows left & right; original is for radio switching in presets and fast forward / backward on CD but not sure)
- OK is for the dash display control
- Bottom key opens the BT app in my car, maybe different on yours because it's not a 'back' logo on mine
Remaping with the internal app doesn't work and is useless with CANBus decoders, and as you said, CarService doesn't detect key presses. I don't know if there is a software which handles the decoder or if everything is inside this box... After looking in different threads, seems that all cars in VW group with SWC have this issue. Sorry no help, but maybe some people with more knowledge will be able to help us.
Thanks, was hoping to hear from someone that has explored VCDS coding before I went down that rabbit hole.
So it's possible that the CAN decoder is too "dumb"? I'm wondering if a Joycon unit can add some flexibility of options.
http://www.rcjoycon.com/base_3/menu...e1=&com_board_search_value2=&com_board_page=&
My last resort option is to rewire the the right SWC buttons to the IR remote that came with the Joying head unit. The IR remote PCB will be housed in the steering wheel with the IR emiter just poking out the side. Initial testing seem promising, has just enough line of sight to work.
Before a hardware mod, I think it might be interesting to get back on VCDS and do more searches.
I was able to test an other headunit in my car, the DNX520VBT from Kenwood. Not an android one, seems to be a WinCE or something even more software closed.
There is with this unit a CANBus box similar to those that we have. After all the wiring done, same thing again : the right arrows keys are unresponsive.
After some web searches, I found that : http://www.seatcupra.net/forums/showthread.php?t=317369
This page concerns the Kenwood unit. On page 3, #57 & #58 replies are interesting. For the same brand cars but different models, the results for the SWC are different and are the same as our issues.
I think it could be interesting to dig again on VCDS to know if there is something with those controls...
I bet the controls on the right are only linked to the dashboard commands so you won't be able to use them on your head unit. Maybe unless you connect additional wires to the buttons an directly to key 1 or key 2 signal of the HU as long as the buttons work via resistances.
The added, right side controls send signals to the radio. The Canbus decoder box just doesn't understand them. All of that was solved with the Joycon device posted above. It intercepts my SWC and mimics them as a HW keyboard connected to the Android HU. When used with Xposed Additions, the options are almost limitless. A single button can have multiple functions, double tap, double tap hold, triple tap, and etc. All of this is with application context too, SWC functions change based on what app is running. It's very nice, just can't remember what they all do.
carter.w.jason said:
The added, right side controls send signals to the radio. The Canbus decoder box just doesn't understand them. All of that was solved with the Joycon device posted above. It intercepts my SWC and mimics them as a HW keyboard connected to the Android HU. When used with Xposed Additions, the options are almost limitless. A single button can have multiple functions, double tap, double tap hold, triple tap, and etc. All of this is with application context too, SWC functions change based on what app is running. It's very nice, just can't remember what they all do.
Click to expand...
Click to collapse
That sounds good.
So you can use both remote controls left and right with your unit? Is there no double input because of the canbus signals to the android unit?
Do the right controls still work with the dashboard settings? How can you switch from dashboard to HU control?
So you can use both remote controls left and right with your unit? Is there no double input because of the canbus signals to the android unit?
Click to expand...
Click to collapse
Yes, both sides can be used. Double input does happen. You have to craft your setup around it. For example, the volume down key could be left stock. Then have the Joycon system look for a tap and hold, for mute. Most of my left side controls are stock/mtc-key functions, right side used for the Xposed Additions stuff.
Do the right controls still work with the dashboard settings? How can you switch from dashboard to HU control?
Click to expand...
Click to collapse
The retrofitted, right controls only replicate the buttons on the right stalk. After car start I can use RH SWC to change dash info. If I use the original stalk buttons, the SWC will no longer work for dash info but continue to work for the HU. You can avoid mapping the OK button to avoid any big issues with dash settings....or tap the stalk controls every time you start. I've been lazily looking into having this by default, still have no VCDS cable.
I only learnt how to use this app yesterday, so please excuse my basics, but because i couldnt find any howto's on this,... this is my attempt to help others.
First get the latest APK from this site.
Install it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Repeat the process for 'Previous'
Repeat the process for 'Previous'
Exit out to Home.
Open up your 'Other' media player.
In my case it was Jet Audio.
Skip Forward / Back was now working via the steering wheel controls.
Volume was always working, as its a system wide thing.
Im sure there is much more that can be done with this app, im just a novice with Android at this stage tho.
Hope this helps.
Thank you very much my friend, this is extremely helpful.
I hope we can improve this thread and put some more tutorial here.
Thanks again.
thanks. i wish i knew more because i find some things kind of hard to find setup guides for...
Is it possible to remap the knob on the right side of the radio to work as brightness control? Turn knob to the right for more brightness, turn left for less brightness?
Thank you so much, but , i have to turn on the app every time i start the car,
is there anyway to make the service starts after boot up?
Is of possible to update the pics i only see something from photobucket to need upgrade account
Verstuurd vanaf mijn A0001 met Tapatalk
grat tutorial!
Is it possible to use other "key actions" like
- volume up
- volume down
- mute
...
where I can find list of all actions that can be bound with keys?
@f1x this tutorial finally made my centre console KNOB working!
You deserve a donation!
moneyvirus said:
Is of possible to update the pics i only see something from photobucket to need upgrade account
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
Yes, i will try to fix them now
Photobucket killed free-sharing a few months ago, i will try to find and alternative to fix them,
Fixed pics now.
silo said:
grat tutorial!
Is it possible to use other "key actions" like
- volume up
- volume down
- mute
...
where I can find list of all actions that can be bound with keys?
@f1x this tutorial finally made my centre console KNOB working!
You deserve a donation!
Click to expand...
Click to collapse
I guess it might be, my volume up \ down was working already through the regular Key mapping software, i think the volume was more universal over the whole unit,. and skip was working for standard apps like radio and the standard media player, but i use JetAudio, and needed this to pass the function through to those apps...
schriss said:
Is it possible to remap the knob on the right side of the radio to work as brightness control? Turn knob to the right for more brightness, turn left for less brightness?
Click to expand...
Click to collapse
this it will be great
Can i change hardware buttons on the headunit with this to start an app?
Is it somehow possible to bind Keyboard keys like arrow and enter to the steering wheel?
Is it possible to bind steering wheel button for voice control with MTCD-dialer?
I cant make calls with google, it says, icant make calls yet, or semething.
Regards
Sorry i haven't been replying guys,
I really only needed to fix my (Skip Forward \ Skip Previous) keys so i stopped learning after i solved my issue.
I'm guessing this app is pretty powerful, and there are many possibilities but personally, i don't know how to do anything else because i haven't looked into it.
I want to thank Geniee33 one more time for this great tutorial(and of course the creator of the app).
This tutorial and the app was really really helpful as the default music player is absolutely useless.
Thanks my friend.
gsezz said:
Is it somehow possible to bind Keyboard keys like arrow and enter to the steering wheel?
Click to expand...
Click to collapse
Does anyone know the answer to this?
I have a W204 Mercedes C-Class and would love the ability to scroll left to right through my apps using the navigation wheel in my centre console then select the app by pressing down on the wheel. :good:
Hello,
I have an Erisin car stereo (KGL) that works with Android 6.0.1 and mcu MTCE and I can not get MTCDTools 1.9 running with PowerAmp.
I set MTCDTools, the previous and next steering wheel buttons are well recognized by the application, but if I run PowerAmp and I press previous or next, I just have a "Beep", but it is not pass nothing!
Before updating the firmware, I had the mcu MTCD and I used the version 1.6 of MTCDTools and it worked very well.
Can someone help me? Thank you.
I know i'm late to this party but it seems on the MTCD/E devices MTC keys may not work so I will have to go this route to remap keys I assume? Does anyone know if this supports double/triple pressing of a button to assign different functions?
Thanks
Dave
Cant wait to try this thanks I mad a Googe Doc here it is hope you don't mind
https://docs.google.com/document/d/1Xp9CiWzaKhxsVZ8MZlVT8AjEd74826R-IIR1LuYiz-M/edit?usp=sharing
Geniee33 said:
I only learnt how to use this app yesterday, so please excuse my basics, but because i couldnt find any howto's on this,... this is my attempt to help others.
First get the latest APK from this site.
Install it.
Repeat the process for 'Previous'
Exit out to Home.
Open up your 'Other' media player.
In my case it was Jet Audio.
Skip Forward / Back was now working via the steering wheel controls.
Volume was always working, as its a system wide thing.
Im sure there is much more that can be done with this app, im just a novice with Android at this stage tho.
Hope this helps.
Click to expand...
Click to collapse
It is possible to create an action like LONG PRESS of a Steering Wheel Command -> Radio FM scan up ?
Hi,
I've installed a new android headunit today. Running android 7.1 out of the box.
I have a few problems with it and a few thing I'd like to know how you do it.
Problems:
- Not all buttons work like they should. Temperature adjusting works fine but changing the air outlet on the passengers side doesn't.
- The car settings app is doesn't work. The toggles go from on to off and back...
Question:
- I'd like to use bluetooth tethering for internet, but that doesn't seem to work. the bluetooth settings look different and I can't choose to use the internet connection. Usb tethering would be a great alternative but I don't thing its available.
The only other option would be to use the wifi hotspot but I hate the fact that I need to switch it on and off all the time.
Hopefully you have a solution for these problems.
Thanks, Frans
I've just installed an Erisin head unit with Android 7.1 in my VW Passat.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My solution for tethering was to use the wifi hotspot on my Nexus 5X. I've used Automate to enable/disable the hotspot when my phone connects/disconnects to Bluetooth so I don't have to switch it on and off all the time.
Overall I'm pretty happy with it. Everything works as it should. I've replaced the default launcher with Car Launcher Pro which seems to be the only car launcher specifically designed for use on an Android head unit rather than a phone. I think it looks a lot better than the default one.
I've installed Waze and Spotify which are now linked together so I can switch between the two really easily. I'm using TuneIn for the radio, but my mobile signal sometimes drops out so I'm tempted to buy the additional DAB unit.
The only real issue I'm having is some slight buzzing interference when the engine is running. It's not terrible but I'll be looking into how I can earth the head unit better to try and suppress it.
Hi,
Do you have found a solution for this problems?
I'm thinking buy an Android head unit for my Peugeot 407, but I'm afraid that many options doesn't work, without original screen...
Hi guys,
I've changed the oem Head-Unit of my Peugeot 407 with a new PX3 with Android 7.1 and all main functions of the original system are ok.
Original Head-Unit was a WipNav (RNeg) with a 7" color display.
Now with the new Head-Unit set I can controll the dual zone clima (all controlls, pilot and passenger) and consumption indicator.
Some pictures at below...
What's your problem for the controls or buttons?
Clima app...
http://img.techpowerup.org/180121/screenshot-2018-01-21-130859.jpg
Consumption indicator
http://img.techpowerup.org/180121/screenshot-2018-01-21-130911.jpg
Main page
http://img.techpowerup.org/180121/screenshot-2018-01-21-130321.jpg
When I push a button of the clima control
Hi trudtilp
Thanks for the photos.
I appreciate if you can answer a few questions:
- The unit, show external temperature, as the original screen show?
- Are the car messages displayed? Like "Low exterior temperature", "Front left seatbelt open", "Doors open", "right headlamp failure", "esp malfunction", ...?
- Original parking sensors are working? Beep and graphics or only beep?
Thanks in advance!
Hello everyone, I'm very interested in this because I would also like to install a head unit: the latest version androïd 8 on my Citroën C5 (RC_) (of course the screen should be adapted ...)
I ask myself some questions also about the sensors of recoil because the car has 8!
I know there are interfaces (look for "DanyMecano" on Youtube) but no way to know if this interface can accept as many sensors
And finally, my car is equipped with amplified JBL sound ... I saw that there were JBL CanBus decoders for Toyota (Aliexpress) but again, nothing for Peugeot 407 (or C5 with the same configuration)...
I'm French so I use the Google translation and I apologize if you do not understand everything!
Signature 60 said:
my car is equipped with amplified JBL sound
Click to expand...
Click to collapse
As I know, JBL sound on Peugeot 407, works great with any canbus, also with the old versions that do not support reverse parking sensors. In a Spanish forum, there are an user who confirm that.
Ok I'll watch this thank you very much
#EDIT:
Do you have a link please?
I just watched 10 pages in Spanish language and I did not find anything ...
Hello everyone!
I found some information ... In ".es" as Peixeiro said!
A sale (too expensive) but the first info is very clear! :
"With this equipment, functions are not lost.
The steering wheel controls, vehicle information, parking sensors, climate, even the JBL system are retained.
With Android 7.1"
I also found a Chinese seller (Seicane) who gives an interesting info in his description, it say:
"Please note: this unit only can support your original car's reversing radar if your car's origin CD is a small screen less than 4.3 inch, then this unit can't support your car's reversing radar."
Below there is a photo of the RD4...
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
You brought a aftermarket unit that differs to the factory unit and expect it to operate with the same feature set, is that correct?
Also, what did the reseller suggest you do?
I am looking for a feature that might be exposed differently, or that could be accessed in a different manner (such as ODB software). The original HU was changing settings for the car/camera, but I reckon they are stored elsewhere, because the original camera still works with the new system.
The reseller told me to check the vehicle app that comes with the unit, but that does not have such settings.
adicrl said:
I am looking for a feature that might be exposed differently, or that could be accessed in a different manner (such as ODB software). The original HU was changing settings for the car/camera, but I reckon they are stored elsewhere, because the original camera still works with the new system.
The reseller told me to check the vehicle app that comes with the unit, but that does not have such settings.
Click to expand...
Click to collapse
No all the stock features are included into the aftermarket custom unit...
In my case...for mazda vehicles ... the menus where included...
That's the price to pay for going to aftermarket solutions (not necessary for one brand or other aftermarket...but aftermarket in general)
Enviado desde mi SM-G975F mediante Tapatalk
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
https://www.toyotanation.com/threads/2016-rav4-backup-camera-sway-lines.1315737/
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
I also have one of the units but for a Toyota Corolla, so your settings might be similar or different to mine. But I went to Settings > CAR > Extra Settings > then there's an option for Reversing Trajectory Display set that to on. I never had this on my stock unit just the stock non moving lines. I will admit it's not integrated with the lines from the camera as it in it's another set that moves by itself, but it's still better than not having them.
adicrl said:
I have a Dasaita PX6, custom fit for Toyota RAV4 2016. The car came with factory camera which included dynamic guide lines that away along with the steering wheel. After taking the car for maintenance, they changed something so that now whenever I tilt the wheel while in reverse, the lines curve all the way (so no longer a gradual curve, they just swap left or right).
While reading about it, I found this topic that explains how to recalibrate those guides. However, that option was with the original head unit. How can I get in the Toyota service menu on the Dasaita, without dismounting it and connecting the original?
The original HU also had a camera menu which I cannot find in Dasaita, see pics attached *Back camera guide line setting*
View attachment 4894979View attachment 4894981
Click to expand...
Click to collapse
My guess is the camera itself has a cpu that handle these, so in order to access the menu you need to reconnect the old headunit.
[RANT / Question]
I simply can't believe that there is no PERMANENT SETTING to disable bluetooth discovery in my TCL Android TV (with version 11 right now).
If there is already a solution in the forums, I didn't find it, so sorry in advance and point me to the thread, please.
Do anyone know a way to PERMANENTLY DISABLE bluetooth discovery? With ADB or something?
(for example on my grandma's TCL TV too, that she won't use any bluetooth device apart from the remote, so she doesn't need her TV to be available for pairing constantly and receiving requests from neighbors).
Bluetooth discovery "enables itself" from time to time no matter what you do. I already know "Bluetooth Discovery Disabler" app, but it's no permanent solution.
It's infuriating, at least for me.
Sorry for the rant. Thanks for any help.
Me too. Please help. I just had this very issue where some jackass kept trying to pair with my tv interrupting our movie. I am beginning to regret getting my Android TV.
xeradas said:
Me too. Please help. I just had this very issue where some jackass kept trying to pair with my tv interrupting our movie. I am beginning to regret getting my Android TV.
Click to expand...
Click to collapse
It's incredible! I can't believe there isn't a PERMANENT solution. What I do, that may be useful for you in the meantime, is EVERY TIME I turn on my TV, I use the app "Bluetooth Discovery Disabler", that I pinned on the Home in the TV to check if BT discovery is enabled or not.
Other thing to consider is that, if you use the optimization app that close unused apps for better performance, the setting of the BT discovery gets to default, so, you should "enable and disable" the setting again after using the optimization app to be sure that it is disabled.
I really hope that, AT LEAST, they should add the option in the "developer options" if they are unsure about "less tech savvy people", so you BET that I WANT THAT OPTION if I go there to use it...
Firmware V8-R51MT05-LF1V508........
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i was about to remove the whole wifi/bt module from the tv to fix that but i'm unable to locate it, it's on the main circuit board? or maybe it's in the bottom part of the tv?
well i found out that you can simply force disable bluetooh apk with adb, rebooot the tv and then bt is fully off
adb shell cmd package disable-user com.android.bluetooth
stasiof said:
Firmware V8-R51MT05-LF1V508........
Click to expand...
Click to collapse
I don't have that firmware. In my country is different. Here you have always bluetooth enabled without the possibility of disabling, BUT you can disable "Bluetooth Discovery", but only temporarily, as my post explain.
Thank you anyway!
blinkycan said:
well i found out that you can simply force disable bluetooh apk with adb, rebooot the tv and then bt is fully off
adb shell cmd package disable-user com.android.bluetooth
Click to expand...
Click to collapse
I'm interested in trying this!
I would apply this in my grandmother's TV, that she won't be using Bluetooth whatsoever.
However I would like to check if the remote control keeps working well, because (if I'm not mistaken), it works with infrared as a classic remote and at the same time has Bluetooth capabilities, but I think them are for "Assistant" and that things that my grandmother doesn't use, of course. If she can still turn on the TV, change channel and volume (and if "home button", etc. still works for basic functionality), is enough.
Does your remote still work normally?
Thank you very much for your input. We may be getting somewhere with this!
they finally added a bluetooh toggle in the latest update of my TCL and no the bluetooh remote do not work with bluetooh off i just use the second remote that came with the tv this one use infrared and the other is bluetooh
blinkycan said:
they finally added a bluetooh toggle in the latest update of my TCL and no the bluetooh remote do not work with bluetooh off i just use the second remote that came with the tv this one use infrared and the other is bluetooh
Click to expand...
Click to collapse
Thanks for the answer!
In the infrared one, can you -for example- move with the pad, press OK, press "Home", "Setup", etc. with bluetooth disabled by ADB (if you tried before the update)?
Just to clarify, sorry for the insistence.
I will look however for the command to counter the disabling with ADB, just in case. And will try your solution in my TV before my grandma's.
Thank you very much!