Related
I tried both last night and they never got a read. I tried multiple pressures too.
Forgetfull said:
I tried both last night and they never got a read. I tried multiple pressures too.
Click to expand...
Click to collapse
I was able to have three people get the Pulse working and the pedometer is counting although not as accurate as a regular step counter.
Just got the spO2 working also, read a 96%
My sp02 Meter didn't read until today. ()
My bpm is working, has been since I got it in the mail yesterday. BUT it is notably finicky.
And the same goes for the sp02 reader.
I haven't been able to get an accurate read from anything with my Spigen btw.
*I haven't looked for any updates( waiting4root), but I suspect most of the issues are software related
Hope this helps!
good call on the spigen case.
I took mine off and now the bpm works well. The O2 sensor is still finicky but at least gets a reading. My S5 with the same case worked though so this is disappointing.
I have tried taking my case off, still no go. Everything else seems to work, not sure on the accuracy. Have tried holding in different positions, just wondered if you have to hold a specific way. I hold it with the phone resting on the finger line the heart & stress text, go keeps returning back to screen to retest. Thx for the post.
[emoji53]
Mine seems to work if you are still and only lightly touching the sensor. Not only that but I used just the tip of my finger. I don't have a problem with it reading anything with the case on. Although the display model in the store seemed touchy.
Thx, calling support to see what they suggest. I even got a big magnifying to look at the led to see if I missed taking the plastic off like on the camera, it was hard to see. So no plastic was on my led at all, bummer, need everything working if I sell for the DE, still thinking on this some more.
**called verizon again, spent about 3 hours today on the phone with 4 different people from verizon the. Sent me to Samsung and after doing what I have already done.
* clear cache
* clear data
* roll back updates
* factory reset
Was told I need to take in to Verizon for replacement.
Ended up after new replacement Note 4 was sent everything works great!
finger placement
hi guys try changing your finger placement for the SP02 and heart rate sensor to work. My sensors will only work with fingers placed as illustrated. The image on the left is placement for heart rate and the image on the right is for the Spo2. Hope this helps .
It's more to do with the right amount of pressure than the exact spot it seems. I find that the weight of the phone on your finger tip is the perfect amount of pressure for the sensor. I can get a reading every time without any issues.
Hello, fellow Nokia fans,
I have been using the Nokia 6.1 as my daily phone for the past 2 months, and it has all been a great phone except for the fact that the fingerprint sensor on this phone sucks a lot. Every time I try to unlock my phone using my index fingers it says something like partial fingerprint detected, try again.
It gets really frustrating at this point, the phone that I used prior to this was a Galaxy S6 which had a front facing fingerprint sensor, that made things much easier. Am I doing something wrong? Is the same issue bothering anyone else? Kindly help me in mitigating this problem.
TIA, Peace.
You can calibrate the same finger twice for more information for the sensor so it registers it more accurately.
I registered my fingerprint like I would register my fingerprint by habit. Now it works perfectly, and I have no complaints whatsoever.
Those in the US using fingerprints to unlock your phone (any device) be aware federal courts have ruled you CAN be compelled to unlock your phone with your fingerprint. You CANNOT be compelled to give up a password. The difference is something you are vs. something you know. Sure it is a pain to use a password/PIN, but think of all the personal information you carry with you in your phone.
ap4ss3rby said:
I registered my fingerprint like I would register my fingerprint by habit. Now it works perfectly, and I have no complaints whatsoever.
Click to expand...
Click to collapse
you also have problem with fingerprint before you do register again? mine is only working when putting fingertip at center, unlike other phones like xiaomi that unlock fast and easy with any part of finger touching the sensor, I don't know if its the sensor smaller or it require more accurate scanning than other phones, it works but sometime hard to unlock when in rush or when finger is sweaty
In fact, this is the worst fingerprint sensor i have tried.
I have Nexus 6P, Huawei Mate 10 Pro and P10 with me
Nokia 6.1 fingerprint sensor keep showing partial detected when hand sweat, dirty or even normal case
silv3rmoon said:
In fact, this is the worst fingerprint sensor I have tried.
I have Nexus 6P, Huawei Mate 10 Pro and P10 with me
Nokia 6.1 fingerprint sensor keep showing partial detected when hand sweat, dirty or even normal case
Click to expand...
Click to collapse
Yeah, buddy even I fell the same thing, but someone suggested, registering the same fingerprint sensor slightly helps with the issue.
aditya214 said:
Yeah, buddy even I fell the same thing, but someone suggested, registering the same fingerprint sensor slightly helps with the issue.
Click to expand...
Click to collapse
Yup, this does help out slightly
I did register 3 type of single finger, but still unrecognized in some case
Even the slightest amout of sweat and the fingerprint sensor fails. Thus I had to set up trusted face to make the unlocking process less painful. Unlocking this phone using the fingerprint is pain in the ass. I think the sensor area is too small that it fails to detect the parts of our fingerprints or it's not calibrated well.
I don' t mean to sound overly negative but the fingerprint sensor is next to useless unless you hands are completely dry and not sweaty whatsoever. The success rate is so low for me that I don't use fingerprint sensor on the 6.1 and went back to using a password - which is at least works consistently
i am using nokia 6.1 plus from past 1 year. the fingerprint sensor also works properly but the option of adding fingerprint suddenly gone right after updating the security update.. how to get it back? please help...
rajshripatil said:
i am using nokia 6.1 plus from past 1 year. the fingerprint sensor also works properly but the option of adding fingerprint suddenly gone right after updating the security update.. how to get it back? please help...
Click to expand...
Click to collapse
Which month's security patch you got on your device?
@D-Mi I have security patch of 1 October 2019
rajshripatil said:
@D-Mi I have security patch of 1 October 2019
Click to expand...
Click to collapse
I have it under settings>security>fingerprint can you post a screenshot fir the same?
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
I tend to agree with you. I registered both right and left thumbs and they both work on command. No 2nd or 3rd attempts yet. Just register the thumbs like you would naturally hold them on the screen(flat).
I also feel like the fingerprint scanner icon is a bit misleading, given the fact that the sensorbis actually above the actual icon
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
But when I try to casually tap the screen to register fingerprint naturally, it won't register, keeps saying press harder or hold longer
Or register the same finger twice.. That's the better solution
Enviado desde mi SM-G975F mediante Tapatalk
Shuthefrontdoor said:
But when I try to casually tap the screen to register fingerprint naturally, it won't register, keeps saying press harder or hold longer
Click to expand...
Click to collapse
The tap needs a certain amount of pressure, not too light either
Corv0 said:
Forget all the "you need to not press hard" bull****, it's way simpler than that.
Register your finger while holding the phone in one hand, position your fingerprint on the sensor exactly as you would casually, keep registering it that way, from a limited position on a one handed held.
If you do a "proper" registering process of your fingers from artificial positions just because you think it helps the sensor, it won't work, even minimal changes in your finger shape will make it generate different keys that will not match a real life press.
I registered my fingers from positions I would practically use to unlock later on, the success rate is now 100% as long as I don't miss the sensor on dark screen, no matter the pressure or the time you hold your finger on the sensor, it will now work every single time
Click to expand...
Click to collapse
Same, and i registered the finger I'm going to be using most twice. Registered casually and from a natural position. I think mine has failed to unlock maybe 3 times in a week. In this case...keep it simple don't over think it.
Sensor is off
I noticed when the screen is off in dark mode and u take a flashlight on a angle of the screen i noticed the sensor is like a U shape just slighty to the left of the finger print icon, now that i kinda setup my finger print just a tat left og the finger print icon its been 100 procent i also noticed moist fingers work better . i could be wrong about it being a sensor but the U shape i think would be the sensor
wirelezzz said:
I noticed when the screen is off in dark mode and u take a flashlight on a angle of the screen i noticed the sensor is like a U shape just slighty to the left of the finger print icon, now that i kinda setup my finger print just a tat left og the finger print icon its been 100 procent i also noticed moist fingers work better . i could be wrong about it being a sensor but the U shape i think would be the sensor
Click to expand...
Click to collapse
You don't need to move your finger away, the sensing part of the sensor is perfectly aligned in the middle
New update on firmware.Science for snapdragon. SBA TO SD3. Made a world of difference for me. Can't wait for my replacement Whitestone to get here to see if sensor works any better with tempered glass. This update absolutely made a huge difference. Not slightly, very significant change for me. I register both thumbs twice and I couldn't get it to not unlock every time. 50+ unlocks and maybe 2 failures. I stopped counting at 50.
Will it work on verizon or only unlocked?
Sent from my SM-G975U using Tapatalk
im on ASC8 firmware on the G9750 10+ and its terrible. hopefully an update comes soon..
Mine has been pretty much perfect since the new firmware update.
Sent from my SM-G975F using Tapatalk
nugzo said:
New update on firmware.Science for snapdragon. SBA TO SD3. Made a world of difference for me. Can't wait for my replacement Whitestone to get here to see if sensor works any better with tempered glass. This update absolutely made a huge difference. Not slightly, very significant change for me. I register both thumbs twice and I couldn't get it to not unlock every time. 50+ unlocks and maybe 2 failures. I stopped counting at 50.
Click to expand...
Click to collapse
I'm waiting on my Whitestone replacement as well. Can you keep us informed on how the sensor works with your new install? I had to pull the last one. It was horrible. I miss my glass...
The problem for me and many people is that when the finger being scanned is dry, scanning won't work (and will be asked to "press harder"). Some people then try to press really hard and it will, forever, say "not match".
People with moisted fingers will not have this problem and will not understand the kind of people I mentioned above. Since I have S10+ for a month, I, kind of, know when the scanning will not work. I will use face scanning instead or if I really want to scan my finger with whatever reason, I just rub my nose with my thumb then it will 100% work (greasy nose does the trick).
I don't know if Samsung can ever fix this since it is not how accurate the reader is.
Dry fingers don't work with the fps even when removing the pre-installed screen protector?
I am debating to remove the screen protector and my main points are:
1. The protection offered by the pre installed screen protector is minimal either way.
2. That the screen colors and usage will become much better.
3. That the fps will work much better even with dry fingers due to the oleophovic coat of the screen.
Has anyone who removed the screen protector tested this?
madvinegar said:
Dry fingers don't work with the fps even when removing the pre-installed screen protector?
I am debating to remove the screen protector and my main points are:
1. The protection offered by the pre installed screen protector is minimal either way.
2. That the screen colors and usage will become much better.
3. That the fps will work much better even with dry fingers due to the oleophovic coat of the screen.
Has anyone who removed the screen protector tested this?
Click to expand...
Click to collapse
I removed mine yesterday and it does help a little with the fps. I still don't like the fps though, I would much rather have a Face ID equivalent. Or have the fps on the back.
itsachirpthing said:
I'm waiting on my Whitestone replacement as well. Can you keep us informed on how the sensor works with your new install? I had to pull the last one. It was horrible. I miss my glass...
Click to expand...
Click to collapse
I had reached out to Whitestone because my first install failed. I had the WSD on my s9+ and went through 5 or 6 in the year (I dropped my phone a lot). So I knew what I was doing, but the first try had a huge bubble. Tried doing the cleaning and reinstall with the backup glue and had a bunch of microscopic bubbles in the top and bottom (guessing I didn't clean it well enough before reinstall). I wasn't sure how to register warrenty wise because technically it worked fine, just was having FPS issues. They ended up replacing without me paying for the shipping which was awesome of them.
Recieved my replacement today, and the install is flawless. One thing to note is on the 10+ the absorb pads hook into the top tray not the bottom (that was a hell of a mess the first time). The original kit didn't come with the pads pre-installed like the replacement kit.
I haven't even gotten the latest OTA yet, and with the WSD glass, it's just as quick and success rate is the same as when I had the pre-installed protector. Might even be faster than my s9+ was...
Got the phone few days ago. Most of the time, fingerprint works on first or second attempts. But now and then it takes 4-5 attempts. and on two occasions i had to try 8-9 times to get it to work. Is it a problem only i am facing or its a common problem? i already updated phone after buying. should i get it replaced or it will be ok with next update
Thanks.
common problem i think. not as fast as the previous one on N9
Well, it is not widespread or "common", some users complain about this, but this issue has been discussed at lenght since the first days of this device, do a search, you will find some useful tips, My sensor is very fast and accurate, I think it depends on several factors, temp, moisture, the way you registered the fingers, screen protectors, etc
Also, register the same finger multiple times... I believe you can add 5 fingerprints....
I understand what you are talking about. I was so frustrated with the phone when I first got it. I deleted all my finger prints and then set them up again. Make sure to slowly follow the fingerprint instructions when adding. I added multiple fingers and some more than once. I have not had any issues since. I have also read some people say remove the factory screen protector. I still have mine on with no issues. Good luck!
Mshawnlane said:
I understand what you are talking about. I was so frustrated with the phone when I first got it. I deleted all my finger prints and then set them up again. Make sure to slowly follow the fingerprint instructions when adding. I added multiple fingers and some more than once. I have not had any issues since. I have also read some people say remove the factory screen protector. I still have mine on with no issues. Good luck!
Click to expand...
Click to collapse
did you have the same issue as mine? like u had to make several attempts and sometimes even 8-9 times to make it work?
only time I've had problems with mine is when my hands have been extremely dry, putting slight moisture on my finger can make it scan better, but for the most part it works perfect unless I'm somewhere hot and dry.
I have similar issues when I have a screen protector on the phone. Sometimes I have to press multiple times, sometimes I have to press harder. Finally going without anything on the screen and the sensor works like a charm.
Screen touch sensitivity.
On my Note 10+ 5G (SM-N976U) I have a setting on the Display page (scroll down near the bottom) that increases touch sensitivity specifically for use with screen protectors. The screen itself is Gorilla Glass 6, which is twice as strong as Gorilla Glass 5, so, if you are the careful sort, you can get by without a glass protector. Even with an extra curved glass protector, with touch sensitivity turned up, I can use light gloves & still the capacitance works fine.
Touch sensitivity has nothing to do with the fingerprint sensor.
Mine works perfect with screen protector. Sure if you put new screen peotector, it takes time to recognise finger. But when protector sits perfect than no prob at all.
Sent from my SM-N976B using Tapatalk
Mine drives me mad , adding finger prints mostly does not work , i cant record my thumb print at all , was wondering if the sensor is not correct under the screen ,its always hit or miss on my phone , with my wifes note 10 there are no problems
peekie said:
Mine drives me mad , adding finger prints mostly does not work , i cant record my thumb print at all , was wondering if the sensor is not correct under the screen ,its always hit or miss on my phone , with my wifes note 10 there are no problems
Click to expand...
Click to collapse
Make a warranty claim, there is no point to complain here, sorry
winol said:
Make a warranty claim, there is no point to complain here, sorry
Click to expand...
Click to collapse
A hard reset solved the problem , it was not a complaint post i made but a comment on the fingerprint sensor, now fixed
I'm missing the iris scanner from the note 9.
Might send it back and go back to the 9
clax6 said:
I'm missing the iris scanner from the note 9.
Might send it back and go back to the 9
Click to expand...
Click to collapse
the sensor works well as long as you don't have dry hands, lick your finger/thumb and it will work every time, sad but true. it's something I realise after it working flawlessly while drinking in a beer garden with condensed glasses but the rest of the time it was hit and miss. seems if your skin is too dry it doesn't read well, but add a bit moisture and it works perfectly. guess it has something to do with the technology in the new sensor using vibration instead of imaging.
Belimawr said:
the sensor works well as long as you don't have dry hands, lick your finger/thumb and it will work every time, sad but true. it's something I realise after it working flawlessly while drinking in a beer garden with condensed glasses but the rest of the time it was hit and miss. seems if your skin is too dry it doesn't read well, but add a bit moisture and it works perfectly. guess it has something to do with the technology in the new sensor using vibration instead of imaging.
Click to expand...
Click to collapse
Yes, lick your finger everytime you want it to work in the midst of a pandemic that seems to be spread by the virus getting transmitted from the hands to the face everytime you touch it...
You can also try this - https://forum.xda-developers.com/galaxy-note-10+/themes/fingerprint-speed-hack-t4071893
No need to lick fingers now...
Excellent advice from ultramag69, this mostly solved my problem, but I'm not happy with Samsung, This problem should not happen on such an expensive device from a famous brand
kimtiti said:
Excellent advice from ultramag69, this mostly solved my problem, but I'm not happy with Samsung, This problem should not happen on such an expensive device from a famous brand
Click to expand...
Click to collapse
The other advice I've found is to set up multiple finger prints with the same finger (you can usually set 5 fingerprints). This will improve the hit rate of the fingerprint sensor...
ultramag69 said:
The other advice I've found is to set up multiple finger prints with the same finger (you can usually set 5 fingerprints). This will improve the hit rate of the fingerprint sensor...
Click to expand...
Click to collapse
Yes it's maximum 4 on this device, it helps a little also
Hi,
Do you have cases when the fingerprint wont unlock the phone (until 5 failures are reached)
This happens to me every now and then and is quite annoying. I don't have a screen protector and have disabled battery optimization for biometrics. Wondering whether to bring the phone for repair.
Did you update to ATE6? If not, please do.
Also try to re-add your fingerprints again, i found that speed and quality of fp sensor depends on how "good" you scanned your fp-s.
Another trick is to press harder when scanning and unlocking (which also works).
Yes, I am on ATE6. Will renroll fp to see.
The issue that I've noticed what it could be is the scanner is always active. The problem I face is when I pull the phone out of my pocket I've reached my attempts and have to use my pin.
In the case of the other post, just add 2 of the same finger. My thumb and pointer are in it twice each
creep138 said:
The issue that I've noticed what it could be is the scanner is always active. The problem I face is when I pull the phone out of my pocket I've reached my attempts and have to use my pin.
In the case of the other post, just add 2 of the same finger. My thumb and pointer are in it twice each
Click to expand...
Click to collapse
I don't have this experience with pulling out of the pocket. Added the finger again and now I am trying to train myself how to press harder and hold the finger patiently until it unlocks.
Adding same finger twice solved this problem for me, when adding second time make sure to scan your finger in different angles, almost like youre trying to miss scanner
S20 here. New tip. I think ultrasonic fingerprint reader is located slightly off-center to the left, so when adding and scanning your fingerprints, aim slightly left.
I discovered this yesterday while cleaning the screen under a bright table lamp, I noticed that you can actually see exact reader's location, where it is bonded to the screen underneath it. I assumed it's not visible.
Reader appears to be letterbox shaped, length around 1.6, width around 0.7 centimeters.
When you turn the screen on, fingerprint icon is located in the center of the screen, you can almost fit another icon next to it to the left, to represent reader's length.
Combined with other tips, some also mentioned by the users above, I rarely have to scan twice now, three times tops. Before I often ran out of allowed number of attempts and had to enter password. Still not perfect or super consistent, but much better. Soo..
Main tips:
• When adding and scanning your fingerprints, aim slightly left. Always keep reader's shape and position in mind. Turn off your screen, and examine it under bright desk lamp, to determine exact reader's shape and location.
• Register your thumb two times for each hand, while rotating your phone (slowly from portrait to landscape, back, and beyond until phone hits space between your thumb and index finger) and move thumb slightly towards finger's bend point and then towards fingertip (do it all over something soft in case you drop it while rotating).
• After you added your fingerprints, lock and unlock your phone multiple times (let's say 10 times) using each hand before you decide if doing it all over is necessary. Maybe even keep it for a day, see if phone manages to optimize data, or maybe you will get used to positioning your fingers in a certain way.
• Make sure to moisturize your hands, noticed scanner struggles with dry skin.
• You may also try to register both left and right thumbs (or other fingers) at the same time, this may speed up unlock, though not sure how secure this is.
• Don't hold your finger for too long, simply firmly tap and lift, phone should unlock.
I would try extra sensitive screen setting in display and try re register fp again.
I've heard some registering same finger twice but I don't really have any fp issues after disabling optimization of the biometrics apk
jasons1004 said:
I would try extra sensitive screen setting in display and try re register fp again.
I've heard some registering same finger twice but I don't really have any fp issues after disabling optimization of the biometrics apk
Click to expand...
Click to collapse
I remember having Touch Sensitivity alway set to on, believe it helped with gaming a bit, but found it had little or no effect on fingerprint reading, was constantly running out of attempts, and was forced to enter password, which is very inconvenient when you're in a public place. But I think it's still worth a try, maybe on S20's that option is somehow interconnected with fingerprint scanner, and boosts something in it as well, but I personally noticed no improvement.
Disabling battery usage optimization for "com.samsung.android.biometrics.app.setting" in "Optimise battery usage", did not improve recognition. I think you should still do it, as it can reduce occasional delay, but if you're using your phone all the time, locking and unlocking, etc, and having reader problems, this will not improve recognition. When it says no match (press harder, cover entire sensor, etc), it means software and scanner are working and reading your fingerprints, but failing to match patterns, so disabling optimization will not improve anything in this scenario. You should delete and try adding your fingerprints again.
Now, after registering same finger twice I noticed immediate improvement in recognition, and looking online for different tips of how you should hold your phone while adding fingerprints, was able to improve recognition even further.
Along with tips mentioned in my previous post, I now rarely have to go beyond two attempts.
Maybe this improvement also has to do with us instinctively learning what works and what doesn't.
Maybe this also has to do with finger size, skin (space between and width of friction ridges), and skin type (dry, oily, etc), that's why we have so many mixed reports. Also hygiene. I noticed with excessive hand washing, number of successful recognitions decreased, even with well moisturized hands.
In conclusion I'll say there is definitely room for improvement here, maybe larger more powerful ultrasonic readers are the answer, maybe better software. Because even with all the tips and tricks, it's not perfect, at least in my experience.
Oh, almost forgot, that factory screen protector has to go. Better fingerprint reading and much better picture quality without it.
And of course, make sure all the latest updates are installed, to all the people who just got their phone out of the box.
I typically enroll 4 of the same finger. I only use my right thumb and really haven't had any issues. I have the WhiteStone Dome glass installed. I have increased touch sensitivity turned on.
Using a poly screen protector with only two registered finger. Working perfectly with absolute zero issue.