It's been a month since my Z2 Force bricked. I've searched and tried everything to fix it. Using two computers,different cables,oreo and nougat blankflashes,even using a deep flash cable still can't make it to boot into fastboot. Device manager shows Qualcomm HS-USB QDLoader 9008. Before it bricked, I was using lineage OS 16. I tried sending images with Whatsapp and suddenly it stucked. So,I tried to press force reboot using volume up + power. Then,it was bricked. It couldn't be turn on and plugged into computer showed Qualcomm HS-USB QDLoader 9008. I attached my qboot_log below. Any help will be appreciated. Thanks in advance.
I think my internal storage might be corrupted. Is there any other way to format my internal storage?
Bump my old thread. Trying to find answers for my nash.
Related
So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.
Hello
Have some problem with this phone.
It started to do boot loops but now can't get any lights or anything up
It shows as relink hs-usb qdloader 9008 on device manager.. Is somehow possible to recover this phone?
I tried using FlashFire to flash a zip and my device now seems to be bricked. The screen is stuck black and when plugged into the computer, it shows up as "Qualcomm HS-USB QDLoader 9008" which means I can't get to even fastboot to use the unbrick tool.
Other sites say you can use the QFIL tool with a programmer and XML files but the fastboot unbrick tool doesn't include these so I'm stuck. Anybody have any ideas on how to get them or fix it otherwise?
I'm not sure about the Robin, but on a tablet that I had you could power down by holding Power for 15 seconds then waiting about 30 seconds then powering it back up and it will load normally. Hopefully this helps.
turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
AnierinB said:
turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
Click to expand...
Click to collapse
See if there's a fastboot/adb is active. If fastboot is, flash the latest factory image.
If adb is reboot into fastboot (if possible) and then flash the factory image.
Left it be for a day and half...then plugged it and held the power button for a few second and walla it came back to life. So unusual.. I already set up my refund with amazon for it... It may be faulty but I may just keep it tbh.
Thread closed at OP's request.
The Flash
Forum Moderator
Hi, I was wondering if anyone has encountered this problem? The phone has been updated to the latest firmware as of the 8th of October 2017. I was using the facebook app and it was crashing repeatedly; after a few times of attempting to restart the app and crashing, the phone froze (black screen) and I tried to do a soft reset (30 secs on power button) but to no avail. I noticed that when the phone is put on the charger, the white LED flash for the front facing camera started blinking. I tried plugging it into the laptop and noticed that "Qualcomm HS-USB QDLoader 9008" driver is installed. Of course white LED flash was blinking too. A bit of digging seems to suggest that the bootloader has been corrupted. How is this possible and how can it be fixed (stopping short of contacting motorola)? Thank you for any advice in advance.
Flash stock firmware !?
Unfortunately I can't even get into the recovery mode (aka down + power button as per instructions here - https://motorola-global-en-aus.cust...ail/a_id/113698/p/30,6720,9837/kw/clear cache). Any other ideas?
Try this: https://forum.xda-developers.com/showpost.php?p=72813119&postcount=6
Oh no, black screen hard brick (to my face)
MP1_ said:
Try this: https://forum.xda-developers.com/showpost.php?p=72813119&postcount=6
Click to expand...
Click to collapse
I have the same issue. Z2 NASH is booting and showing the qualcomm usb qloader in windows however I have no response from the gui or screen whatsoever. This happened immediately after a factory reset so, not only can I not boot to TWRP, but I also cannot communicate thru ADB. Please help if you can. I am currently following your guide here for flashing from windows and installing / flashing stock firmwares. I will post back my results. Thanks for any help you can offer...
I have the same issue, have there been any fixes? My Moto z2 play randomly bricked one night, same "Qualcomm HS-USB QDLoader 9008" in my "other devices" tab, and i have no clue what to do. My phone wont do a single thing, it was flashing the led on the right side when it was charging, now it does nothing at all. Any help is appreciated