turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
AnierinB said:
turned the device off and now stuck in Qualcomm HS-USB QDLoader 9008... any suggestions
Click to expand...
Click to collapse
See if there's a fastboot/adb is active. If fastboot is, flash the latest factory image.
If adb is reboot into fastboot (if possible) and then flash the factory image.
Left it be for a day and half...then plugged it and held the power button for a few second and walla it came back to life. So unusual.. I already set up my refund with amazon for it... It may be faulty but I may just keep it tbh.
Thread closed at OP's request.
The Flash
Forum Moderator
Related
So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.
I tried using FlashFire to flash a zip and my device now seems to be bricked. The screen is stuck black and when plugged into the computer, it shows up as "Qualcomm HS-USB QDLoader 9008" which means I can't get to even fastboot to use the unbrick tool.
Other sites say you can use the QFIL tool with a programmer and XML files but the fastboot unbrick tool doesn't include these so I'm stuck. Anybody have any ideas on how to get them or fix it otherwise?
I'm not sure about the Robin, but on a tablet that I had you could power down by holding Power for 15 seconds then waiting about 30 seconds then powering it back up and it will load normally. Hopefully this helps.
Hello,
I don't find any previous helps for an Htc One M8 Hard bricked with the message : "Qualcomm HS-USB QDLoader 9008".
Every thing is stopped about it since 2014 ?
Somebody has a new help for me to ubricke the M8 ?
The M8 has no booting, no access to bootloader, no access to recovery. The Red light is blinking in charging mode.
Thank you for help.
Did it just happends or after you flashes Rom and Firmware. If it happends on it self then you are better off getting a new phone
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
sharrymz said:
Lenovo Vibe P1 not power on when press power buttion show green light on notification and connect to pc show HS-USB Diagnostics 9006 mode.
try to flash qfil and other tools but fail to go in download mode. try all volume keys up and down but not go in download mode.
Click to expand...
Click to collapse
Download mini partition tool and delete all partition on phone, then format all as ext4 primary
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
sharrymz said:
its read only partitions problem is 9006 diagnostic mode to 9008 download mode.
My phone is Lenovo Vibe P1 (c72) No display only blue light and when connect to pc 9006 mode try all keys no recovery no display no vibrate.
my recovery menu is not working. I stuck in quallcomm hs-usb diagnostics 9006 mode and cannot go the hs-usb qdloader 9008 option
* Press vol + and put USB cable: cannot go hs-usb qdloader 9008 mode
* Press vol + and vol - and power -> cannot go diagnostics menu
* When plug in usb, push power button -> cannot go hs-usb qdloader 9008 mode
I try all combinations but I cannot go to the hs-usb qdloader 9008 mode. Is there any possibility to recover phone on hs-usb diagnostics 9006 mode?
Click to expand...
Click to collapse
Write me a pm
help me please.........same problem but device is different......
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
bhsrgavkumar said:
same problem with me bro my lyf wind 1 is also in same mode I also did the same thing I think you can solve my problem please consider my issue........
I belive that this issue doesn't depend on the device model and it depends on the processor.....my processor is QUALCOMM snapdragon 410 with 1200 MHz clocking speed....
thanks in advance
Click to expand...
Click to collapse
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
sure sir i'll try it if i have any queries i'll ask you,thanks for your valuable time
bro,YOU ARE THE BEST,JUST BECAUSE OF YOU I AM ABLE TO GET MY MOBILE BACK TO LIFE...........LOVE YOU
Starchm said:
download minipartition tool, and delete all partition, then go and format all to primary ext4 without any label.
Click to expand...
Click to collapse
I format it as ext4. But I can't load the rum. Com 3 sees the device on port 9008. No display and charge indicator. Qfil is failing. Can you help?
Device: Lenovo P1A42 s288
It's been a month since my Z2 Force bricked. I've searched and tried everything to fix it. Using two computers,different cables,oreo and nougat blankflashes,even using a deep flash cable still can't make it to boot into fastboot. Device manager shows Qualcomm HS-USB QDLoader 9008. Before it bricked, I was using lineage OS 16. I tried sending images with Whatsapp and suddenly it stucked. So,I tried to press force reboot using volume up + power. Then,it was bricked. It couldn't be turn on and plugged into computer showed Qualcomm HS-USB QDLoader 9008. I attached my qboot_log below. Any help will be appreciated. Thanks in advance.
I think my internal storage might be corrupted. Is there any other way to format my internal storage?
Bump my old thread. Trying to find answers for my nash.