Related
Hello there,
I am a bit confused on how to find out which firmware is the correct one for my Samsung Galaxy Tab S and download it.
So I went to Settings-->General-->About Device and there I see my Model Number SM-T805, my Baseband Version T805XXU1ANF6 and my Buid number KOT49H.T805XXU1ANFB .
So I went to http://www.sammobile.com/firmwares/ I put my model number in Search field and on the list that comes up I see my model number and something that is called PDA and CSC columns. Which column should I check and which one corresponds to my Baseband Version and Build number?
I also tried that site too http://samsung-updates.com/ I search my device and when I find it I see a column Version .
Now that column to which one of the two, Baseband Version or Build number corresponds to?
So I don't know which site to choose for my future updates and how to know if there is an update, which one is the correct one for my tablet without risking to brick my device?
Thank you in advance,
Just look for the build number (PDA). The CSC (Consumer Software Customisation) just refers to your region/carrier. So just select the right build for your country and carrier (if applicable). I wouldnt worry about the Baseband, that is part of the firmware.
If you live in Athens then you would select:
TM-T805
Greece
2014 July
4.4.2
T805XXU1ANFB
T805EUR1ANF1
P.S. note your country code EUR is part of the CSC build name.
dinothenino said:
Hello there,
I am a bit confused on how to find out which firmware is the correct one for my Samsung Galaxy Tab S and download it.
So I went to Settings-->General-->About Device and there I see my Model Number SM-T805, my Baseband Version T805XXU1ANF6 and my Buid number KOT49H.T805XXU1ANFB .
So I went to http://www.sammobile.com/firmwares/ I put my model number in Search field and on the list that comes up I see my model number and something that is called PDA and CSC columns. Which column should I check and which one corresponds to my Baseband Version and Build number?
I also tried that site too http://samsung-updates.com/ I search my device and when I find it I see a column Version .
Now that column to which one of the two, Baseband Version or Build number corresponds to?
So I don't know which site to choose for my future updates and how to know if there is an update, which one is the correct one for my tablet without risking to brick my device?
Thank you in advance,
Click to expand...
Click to collapse
To you will be helped by KIES, which will find the right new firmware for your Region-code CSC using the model type and serial number of your Tab.
1. Updating to the latest version of KIES 3
2. Run the KIES 3
3. KIES Menu Tools -> Firmware Upgrade and Initialisation -> Model name SM-T805 -> OK -> S / N (Serial Number of your Tab) -> OK -> OK -> OK
4. Turn on your Tab and connect it to PC with KIES 3
5. Next step by step according to the instructions KIES 3. Update to the latest version stock firmware can take several hours.
Regards
porcelana said:
To you will be helped by KIES, which will find the right new firmware for your Region-code CSC using the model type and serial number of your Tab.
1. Updating to the latest version of KIES
2. Run the KIES
3. Turn on your Tab and connect it to PC with KIES.
4. KIES Menu Tools -> Firmware Upgrade and Initialisation -> Model name SM-T805 -> OK -> S / N (Serial Number of your Tab) -> OK -> OK -> OK
5. Next step by step according to the instructions KIES
It can take some hours.
Regards
Click to expand...
Click to collapse
@porcelana, I wish I could use KIES to do everything automatically but since I am rooted, I have to find the right firmware, download it manually and then use ODIN to flash it.
So @ashyx if I understood it correctly, first I should check my Buid number on my tablet which is KOT49H.T805XXU1ANFB, then I should go to that site http://www.sammobile.com/firmwares/, then put my model number in the Search field and on the list that comes up, I should look up under the PDA column a firmware ending in T805XXU1ANFB to match my Build number on my tablet and on the Country/Carrier column I should look up for my country which is Greece.
Did I get it or not?
dinothenino said:
@porcelana, I wish I could use KIES to do everything automatically but since I am rooted, I have to find the right firmware, download it manually and then use ODIN to flash it.
Click to expand...
Click to collapse
In this case, you can also use KIES, but only for to find correct data (PDA, Phone, CSC) of the original stock firmware for your Tab with its original Region-code CSC. To do this, you should limit the use of only these steps:
KIES Menu Tools -> Firmware Upgrade and Initialisation -> Model name: SM-T805 -> OK -> S / N (Serial Number of your Tab) - > OK.
After that, KIES will find the right new firmware for your Region-code CSC using the model type and serial number of your Tab, and will show you the data on a PC screen for PDA, Phone, CSC and also the Region-code for which your Tab was made. This is the correct data for the new original stock firmware for your Tab with its original Region-code CSC. This is important! Because it reduces the chance of losing IMEI at flash stock firmware with others Region-code CSC. Having these correct data from KIES for PDA, Phone, CSC and original Region-code, you can already look for this stock wirmware for an flash it through Odin. The necessary firmware, you can look at:
http://samsung-updates.com/device/?id=SM-T805
http://live.samsung-updates.com/index.php?device=SM-T805
http://forum.xda-developers.com/galaxy-tab-s/general/official-firmware-selection-sm-t700-sm-t2960225
http://forum.xda-developers.com/galaxy-tab-s/development/firmware-galaxy-tab-10-5-wifi-t2934279/post56618136#post56618136
Regards
Thank you very much for your precious help @porcelana:good:
You answered a very troublesome topic concerning the correct procedure of finding the right firmware for my tablet
without the risk of losing my IMEI
Much obliged,
Regards
Since when is it not possible to update via kies if you're rooted?
If you're rooted Kies won't let you update your current ROM, but it will let you install the stock firmware and then it will let you update... Well at least that was my experience with my Galaxy S4, haven't had to update my Tab S yet. Although it's quicker and easier to download firmware updates and just Odin them. :sly:
I am confused to find correct firmware for my huwei ascend g7l01 buildnumber g7l01v100r001c00b239sp01
Hi all..
I am new to this web site, so hope you guys will help me..
I have a Samsung Tab S (SM T-800)..
Its really really slow, i have tried to reset to factory settings, but it didnt help..
I have read that it may help to, downgrade to Kitkat... Is it true??
Can someone help me, to find the right Kitkat Firmware.. My build-number is T800XXU1CPK2..
I found this on Sammobile
2014-07-13 Nordic countries 4.4.2 T800XXU1ANFB T800NEE1ANF2
2014-06-26 Nordic countries 4.4.2 T800XXU1ANF8 T800NEE1ANF2
2014-05-30 Nordic countries 4.4.2 T800XXU1ANEB T800NEE1ANE3
How do i see, which one i need?
Sorry for my bad english.
Best regards.
Morten
i have got a samsung galaxy s6 edge plus (SM-G928F). I didn't about the region of my phone. how can I download the right firmware for it? please help!!
vang aun said:
i have got a samsung galaxy s6 edge plus (SM-G928F). I didn't about the region of my phone. how can I download the right firmware for it? please help!!
Click to expand...
Click to collapse
I know that this is a long-standing question, but I will answer. Perhaps this will help someone with a similar problem.
This is possible if you know the Serial Number of your phone. You can find it in several places, for example, on the back cover of the phone, on the sticker of the original box or in the phone settings in the section "About device". Usually Serial Number has 11 characters (letters and numbers) and usually begins with the letter R.
Use your Serial Namber and the recommendations of this post:
https://forum.xda-developers.com/showpost.php?p=58515655&postcount=3
PS: Unfortunately your phone model is not discussed in this thread and so we can receive a remark from the Forum Admin. Try asking a question in the thread that fits your phone model or use private messages. It will be correct.
Hi, please can you tell me in the case of a phone that is in "Brick death" and was able to recover at least you can already access to "Emergency Download Mode", but logically I do not have any tangible data from the phone, therefore it necessary to use the ODIN, but in this case if I only have the SERIAL and other data of the phone label, how can I know which Firmware to download and which is the correct one?
Data of the phone label:
Samsung Galaxy S4 Mini Duos (Dual SIM)
Model: GT-I9192
FCC ID: A3LGTI9192
SSN: -I9192GSMH
S / N: R21G705L1WX
IMEI1: XXXXXXXXXXXXXXX
IMEI2: XXXXXXXXXXXXXXX
You already tried with a Firmware:
Official ROM Firmware RUSS (Spanish)
Samsung S4 Mini GT-I9192
Android: 4.4.2 KitKat
File: I9192XXUCNG2_I9192SERCNG2_I9192XXUCNG2_HOME.tar.md5
This Firmware is the only one that ends well (GOOD) with ODIN but when it automatically restarts, it stays in BOOTLOOP, continuously restarting, the other problem I have is that on the phone screen when it is in the "Download Mode", it seems to have the ERROR: "Write Protection: enable". I think that this is the reason why the Flasheo does not end well even if the ODIN says that it culminates all GOOD.
In this case which serial procedures to follow?
CAPTURE: https://prntscr.com/j7uk0y
Thk.. and Sorry my English.
In which country did you buy this phone when it was new and in factory sealed box?
Try to download the firmware for your phone for this country. You can download the firmware using this links:
http://samsung-updates.com/device/?id=GT-I9192
http://live.samsung-updates.com/index.php?device=GT-I9192
https://www.sammobile.com/firmwares/galaxy-s4-mini/GT-I9192/
https://updato.com/firmware-archive-select-model?q=GT-I9192&exact=1&r=SER&v=KitKat%28Android+4.4.2%29&rpp=15
As process of record comes to the end successfully with ROM of the region of SER (Russia), it is possible to try to load in this case a service ROM for the same region of SER - I9192XXSCQA3_SER_20170428194852_factory. Here reference to such ROM:
https://4pda.ru/pages/go/?u=https%3A%2F%2Fcloud.mail.ru%2Fpublic%2F4HdR%2Ftz3V8XMSr
I hope this was useful for you.
PS: Unfortunately your phone model is not discussed in this thread and so we can receive a remark from the Forum Admin. Try asking a question in the thread that fits your phone model or use private messages. It will be correct.
porcelana said:
In which country did you buy this phone when it was new and in factory sealed box?
Try to download the firmware for your phone for this country. You can download the firmware using this links:
http://samsung-updates.com/device/?id=GT-I9192
http://live.samsung-updates.com/index.php?device=GT-I9192
I hope this was useful for you.
PS: Unfortunately your phone model is not discussed in this thread and so we can receive a remark from the moderator. Try asking a question in the thread that fits your phone model or use private messages. It will be correct.
Click to expand...
Click to collapse
ok, sorry for the error. If the moderator can change the thread of my question to another site, GOOD. Anyway, thanks for the help and I will try to discuss it with you at the moment. I will try to follow the links that I send to see what I achieve!
The phone was purchased here in Venezuela, brought to me by a family member to help repair it, but by now it does not have the box, the phone has time with it, but it is original when I buy it here. Thank you
EngelP said:
Hi, please can you tell me in the case of a phone that is in "Brick death" and was able to recover at least you can already access to "Emergency Download Mode", but logically I do not have any tangible data from the phone, therefore it necessary to use the ODIN, but in this case if I only have the SERIAL and other data of the phone label, how can I know which Firmware to download and which is the correct one?
Data of the phone label:
Samsung Galaxy S4 Mini Duos (Dual SIM)
Model: GT-I9192
FCC ID: A3LGTI9192
SSN: -I9192GSMH
S / N: R21G705L1WX
IMEI1: XXXXXXXXXXXXXXX
IMEI2: XXXXXXXXXXXXXXX
You already tried with a Firmware:
Official ROM Firmware RUSS (Spanish)
Samsung S4 Mini GT-I9192
Android: 4.4.2 KitKat
File: I9192XXUCNG2_I9192SERCNG2_I9192XXUCNG2_HOME.tar.md5
This Firmware is the only one that ends well (GOOD) with ODIN but when it automatically restarts, it stays in BOOTLOOP, continuously restarting, the other problem I have is that on the phone screen when it is in the "Download Mode", it seems to have the ERROR: "Write Protection: enable". I think that this is the reason why the Flasheo does not end well even if the ODIN says that it culminates all GOOD.
In this case which serial procedures to follow?
CAPTURE: https://prntscr.com/j7uk0y
Thk.. and Sorry my English.
Click to expand...
Click to collapse
Boot to recovery and then factory reset. It should then boot.
My take around 10 minutes, be patient.
ashyx said:
Boot to recovery and then factory reset. It should then boot.
My take around 10 minutes, be patient.
Click to expand...
Click to collapse
Thank you friend, I am patient and I know that this takes some time on the first boot in some models, but this is not the case, the phone DOES NOT load the boot BOOT, it keeps restarting when the black screen letters appear saying: "Samsung Galaxy S4 Mini" turns itself off and restarts again, this happens infinitely, if I do not remove the battery, it consumes it completely.
I put a Capture where it starts to restart the terminal: https://prntscr.com/j8ew9l
EngelP said:
Thank you friend, I am patient and I know that this takes some time on the first boot in some models, but this is not the case, the phone DOES NOT load the boot BOOT, it keeps restarting when the black screen letters appear saying: "Samsung Galaxy S4 Mini" turns itself off and restarts again, this happens infinitely, if I do not remove the battery, it consumes it completely.
I put a Capture where it starts to restart the terminal: https://prntscr.com/j8ew9l
Click to expand...
Click to collapse
OK, can you flash the firmware again and post screen shots of both odin and your device screen?
samsung a6
I have samsung a6 it missing os and it stock recovery missing too . Is there a way to get the correct pda file .
thank u.
fxankiiiieee said:
I have samsung a6 it missing os and it stock recovery missing too . Is there a way to get the correct pda file .
thank u.
Click to expand...
Click to collapse
If you know the Serial Number of your phone, then try to use for this KIES as it is described here https://forum.xda-developers.com/showpost.php?p=58515655&postcount=3. You can find the serial number of your phone on its back cover, on the original Samsung box or in the phone purchase documents. You can also try to find the correct PDA using the Serial Phone Number and the Smart Switch program.
I recently bought a Galaxy Watch (46mm) variant and I wanted to change the region so it could support Samsung Pay as it's not available in India. I came across the "sdb tool" that could potentially change the region but can't find the download link to it. All the posts surrounding the region change lead me to "https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330" but the "SDBstarterKidv1" file is probably removed as I am getting error 410 when trying to download. Sorry, I am a total noob so I would appreciate if someone could help me out in changing the region so Samsung Pay could work.
Thank you in advance.
I'm on mobile so It's going to take me a moment to find the link now.
Before you do anything you should check what region you want to add and find the code for it, because the region names are just 3 letter codes and it's hard to know what is going on when selecting the code and you don't want to spend hours guessing. And before you change the region write down the one your watch came with so you can go back if needed.
First download the zip from here on your computer.
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
And next follow the steps on here to change region (I know it says gear sport but I did it step by step on my galaxy watch)
https://forum.xda-developers.com/sm...nging-region-samsung-gear-sport-r600-t3771324
And that should do the trick.
I tried the steps but I am getting the error everytime I run sdb connect- error: failed to connect to remote target '192.168.0.185'
Any solution?
Are you sure you got the IP right? They are usually usually 192.168.1.x
Did you reboot after setting up debugging mode on?
I only changed the WiFi to always on and it worked fine, by the way I have fixed IP set on my devices on the router but it shouldn't matter.
Edit: I just looked into it, try the IP with the port too like this example: 192.168.1.10:26101
BlackCatO8 said:
Are you sure you got the IP right? They are usually usually 192.168.1.x
Did you reboot after setting up debugging mode on?
I only changed the WiFi to always on and it worked fine, by the way I have fixed IP set on my devices on the router but it shouldn't matter.
Edit: I just looked into it, try the IP with the port too like this example: 192.168.1.10:26101
Click to expand...
Click to collapse
Hey. Thanks it worked just fine. I think I missed reboot step which was causing the issue. Also I downloaded Tizen studio (CLI) and installed it. Don't know if that helped but it worked so thanks a lot.
anmol112 said:
Hey. Thanks it worked just fine. I think I missed reboot step which was causing the issue. Also I downloaded Tizen studio (CLI) and installed it. Don't know if that helped but it worked so thanks a lot.
Click to expand...
Click to collapse
Nice, I'm glad I could help!
After you download sdb 2.2.6, first open data/tools and run sdb, window will close. Then run CMD from same folder by holding shift + right click and open cmd. Then you need to type sdb connect (watch ip) and confirm RSA auth. On watch, pay attention to watch when it appears. Then type sdb shell and copy command for changing region.
I was getting same error, because I didnt pay attention to watch, it didnt wake up the screen to accept RSA authentication.
Question
I got a Galaxy Watch(LTE) as a present from a friend abroad. I would like to use the LTE feature(make calls etc) on my country.
Do I need to change region?
or
Do I need to updagte the firmare to the latest one applying on my carrier and country?
or
I need both of the above?
Thank you very much
@fdhsdrdark
Maybe start with more infos...
Model Name for instance...
SM-R805F or SM-R805U or ?
Best Regards
adfree said:
@fdhsdrdark
Maybe start with more infos...
Model Name for instance...
SM-R805F or SM-R805U or ?
Best Regards
Click to expand...
Click to collapse
It's SM-R805F
Thanks for the response.
adfree said:
@fdhsdrdark
Maybe start with more infos...
Model Name for instance...
SM-R805F or SM-R805U or ?
Best Regards
Click to expand...
Click to collapse
I would like to know that too.
SM-R805U
Netherlands
Grtz Henro
Hey, I did all of the above and got to the sdb connected stage. However, when i type sdb shell, it said error: more than one target found. Specify the target with -s option. how do i fix this?
Hello
What would be the steps if I am doing the process on a MacBook? I can see there is a macOS option in the zip file but it does not contain the same apps like Ansicon.exe.
Any help would be appreciated!
i have same issue
fdhsdrdark said:
I got a Galaxy Watch(LTE) as a present from a friend abroad. I would like to use the LTE feature(make calls etc) on my country.
Do I need to change region?
or
Do I need to updagte the firmare to the latest one applying on my carrier and country?
or
I need both of the above?
Thank you very much
Click to expand...
Click to collapse
i have same issue
Changing the region on Galaxy Watch R800
Hi all, I recently bought a Galaxy SM-R800 and thought I would be able to use it with Samsung Pay in Australia. The app fails to connect to the watch (Samsung Pay Watch plug-in). From what I can see, the watch was made in Vietnam.
The software installed is as follows:
One UI version - 1.5
Tizen version - 4.0.0.7
Software version - R800XXU1DSL1
Knox - 2.4.0
Knox Tizen Wearable SDK - 2.4.0
SE for Tizen - 2.0.0
TIMZ - 3.0.0
Does anyone have a solution for this. I've tried what I could find online, which appears to have outadated firwares that dont work with the current firmware already on the watch. Hoping someone has a solution. Thanks in advance.
Samsung Galaxy watch
Hi all,
Every steps are ok. When I type "launch_app csc-manager.csc-pre-configuration", it is "successfully launched", but nothing appears on my watch.
It is an SM-R805F.
Do you have any idea?
Thank you in advance!
evolution7even said:
Samsung Galaxy watch
Hi all,
Every steps are ok. When I type "launch_app csc-manager.csc-pre-configuration", it is "successfully launched", but nothing appears on my watch.
It is an SM-R805F.
Do you have any idea?
Thank you in advance!
Click to expand...
Click to collapse
i have same issue
Hello, today I've tried to downgrade my galaxy watch 42mm to an older firmware version. Odin said the install was completed but then my watch won't turn on.
I can't enter to download mode, if I try it, it will reboot to the same screen (Odin mode)
What can I do now?
The firmware watch was running before flashing was R810XXU1DSL1 I guess, and the firmware I tried to flash was R800XXU1CSE1
imgur .com/a/lAmJBE1 (Here's the screen I'm getting back to)
Torreno10 said:
Hello, today I've tried to downgrade my galaxy watch 42mm to an older firmware version. Odin said the install was completed but then my watch won't turn on.
I can't enter to download mode, if I try it, it will reboot to the same screen (Odin mode)
What can I do now?
The firmware watch was running before flashing was R810XXU1DSL1 I guess, and the firmware I tried to flash was R800XXU1CSE1
imgur .com/a/lAmJBE1 (Here's the screen I'm getting back to)
Click to expand...
Click to collapse
how u flashed firmware R800 and ur watch R810 ????
TRY FLASH ORIGINAL FIRMWARE FOR UR WATCH
Sent from my SM-N975F using Tapatalk
carlitobahsoun said:
how u flashed firmware R800 and ur watch R810 ????
TRY FLASH ORIGINAL FIRMWARE FOR UR WATCH
Sent from my SM-N975F using Tapatalk
Click to expand...
Click to collapse
I'd try it, but when I want to go to download mode, I still get back to Odin Mode screen
USB cable and Odin...
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
The firmware watch was running before flashing was R810XXU1DSL1 I guess, and the firmware I tried to flash was R800XXU1CSE1
Click to expand...
Click to collapse
Best Regards
adfree said:
USB cable and Odin...
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Best Regards
Click to expand...
Click to collapse
Could you also please link me the correct firmware for my watch?
According to your Photo... you have really SM-R810
https://imgur.com/a/lAmJBE1
All you have to do... take SM-R810 Firmware... next time...
DSL1 is at the moment latest...
https://forum.xda-developers.com/showpost.php?p=81261659&postcount=133
Code:
R8[COLOR="Green"][B]1[/B][/COLOR]0XXU1DSL1
CSE1 is here:
https://forum.xda-developers.com/smartwatch/galaxy-watch/firmware-sw-r810-t3937763
Code:
R8[COLOR="Green"][B]1[/B][/COLOR]0XXU1CSE1
But for now you killed Security chain by using wrong Firmware from wrong device:
Code:
SM-R8[COLOR="Red"][B]0[/B][/COLOR]0
I know no other way... without USB cable NO chance at home...
Best Regards
Hey! Back with an update.
I have bought myself the Gear S charger, I managed to connect the galaxy watch to pc, and I tried to flash the BL with Odin, however, it gets stuck at flashing the cm.bin and after a while it fails. What can I do?
@Torreno10
Try first Combination Firmware for SM-R810:
https://www.file-upload.net/download-13832553/COMBINATION-FT40_R810XXU1ASG1.tar.md5.7z.html
You can select this Single file into AP... in Odin
Code:
COMBINATION-FT40_R8[B]1[/B]0XXU1ASG1.tar.md5
If nothing explode and Combination firmware hopefully flashed complete... and working...
Then flash SM-R810 Stock Firmware...
Best Regards
adfree said:
@Torreno10
Try first Combination Firmware for SM-R810:
https://www.file-upload.net/download-13832553/COMBINATION-FT40_R810XXU1ASG1.tar.md5.7z.html
You can select this Single file into AP... in Odin
Code:
COMBINATION-FT40_R8[B]1[/B]0XXU1ASG1.tar.md5
If nothing explode and Combination firmware hopefully flashed complete... and working...
Then flash SM-R810 Stock Firmware...
Best Regards
Click to expand...
Click to collapse
Thank you man, you're the best. It flashed succesfully and I could get into download mode to flash the original firmware. Thank you again for your time and patience
Where would i find the firmware files for the LTE version of SM-R815U? I want to convert to USA. Mine is AT&T and stuck on 4.0.0.1. Also how would i go about flashing it? Im new to this, sorry. Thx
@equlizer
To find SM-R815U Firmware follow this thread...
https://forum.xda-developers.com/smartwatch/galaxy-watch/help-sm-815u-galaxy-watch-42mm-lte-t4049273
netOdin + infos
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
I want to convert to USA. Mine is AT&T and stuck on 4.0.0.1.
Click to expand...
Click to collapse
What ever you mean with convert...
I hope you have SM-R815U and not something else...
ATT has ATT as CSC...
XAR is for US... but IMHO this is strange CSC...
So IMHO easiest way to prevent toooooo much time waste... jump direct to CSL2 with netOdin.
OWN RISK!
Best Regards
I have a 815u but it won't work in Canada. Where is firmware for Canadian version of 42mm LTE? Can I flash it safely?
I want to be able to use LTE in canada. The watch i have right now is USA AT&T. Can i change the CSC or flash canadian firmware?
Torreno10 said:
Could you also please link me the correct firmware for my watch?
Click to expand...
Click to collapse
Hi @Torreno10, how're you?
I done the same thing, uploaded Rm800 into my Rm-810.
I bought the gear s dock to do firmware flash usb, but what is the correct firmware file (before 4.0.7) to do this actions?
Could you help me?
Best regards.
Could someone possibly tell me where I can find the latest firmware for the SM-825U?
I ordered a Gear S watch charger, should be here tomorrow. I watched the video, just cannot for the life of me figure out why I can't find the firmware!
Thanks in advance.
@Nickitt
Can you look please here:
https://forum.xda-developers.com/sm...axy-watch-active-2-44mm-sm-r820-odin-t4009587
And for Firmware latest ATF2...
https://www.file-upload.net/download-14226268/R825USQU1ATF2.7z.html
Best Regards
adfree said:
@Nickitt
Can you look please here:
https://forum.xda-developers.com/sm...axy-watch-active-2-44mm-sm-r820-odin-t4009587
And for Firmware latest ATF2...
https://www.file-upload.net/download-14226268/R825USQU1ATF2.7z.html
Best Regards
Click to expand...
Click to collapse
Thank you so much!
I will let you know how it goes once my charger shows up.
Nickitt said:
Thank you so much!
I will let you know how it goes once my charger shows up.
Click to expand...
Click to collapse
hello
i have got r810 and i bricked it also cause it disconnected in the middle of the flash at netodin.
now when i go to wireless download mode it freeze whitout an option to choose between wps to ap mode.
someone can help me with that ?
i read here that with the gear s charger i can connect it through the usb, is that right and if so how i do that ?
thank you so much
@tomben
Check this:
https://forum.xda-developers.com/smartwatch/gear-s3/wireless-mode-enter-gear-s3-sm-r760-t3710855
And this, if out of luck and you need USB cable...
https://forum.xda-developers.com/showpost.php?p=78545468&postcount=74
Best Regards
I have a 46mm LTE R805W (Canada) version and it's still on 4.0.0.0 which seems to be the launch version. I've tried putting both Speakout and Rogers sim cards into my phone and see if software update finds anything, but it doesn't appear to. I've seen others using Canadian models get updates to 4.0.0.7 and wondering how I can do it.
On a side note, when I do the CSC change, it only shows XAC, so it looks like my firmware doesn't have multi CSC. Anyone know where to get R805W firmwares so I could manually flash them?
Thanks
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R805W/version.xml
Code:
R805WVLU1[B]BSL3[/B]/R805WOYV1BSL3/R805WVLU1BSL3
https://doc.samsungmobile.com/SM-R805W/XAC/doc.html
BSL3 is latest for Canadian SM-R805W
Can you give more details?
A
Exact Version on your device...
Code:
*#1234#
Easiest way... to see all infos about Firmware...
B
You have eSIM activated?
Best Regards
adfree said:
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R805W/version.xml
Code:
R805WVLU1[B]BSL3[/B]/R805WOYV1BSL3/R805WVLU1BSL3
https://doc.samsungmobile.com/SM-R805W/XAC/doc.html
BSL3 is latest for Canadian SM-R805W
Can you give more details?
A
Exact Version on your device...
Code:
*#1234#
Easiest way... to see all infos about Firmware...
B
You have eSIM activated?
Best Regards
Click to expand...
Click to collapse
Hey, sorry, didn't see your reply.
AP: R805WVLU1ARH3
CP: R805WVLU1ARH3
CSC: R805WOYV1ARH3
No eSim activated. I plan to use it as a BT model. I got it at a good price used, and I didn't know so much hassle with LTE versions for updating (must go through carrier, etc).
Thanks!
I know 3 ways to update...
A
FOTA aka over the air
Phone AND Watch is paired AND with this funny Samsung App...
Funny Samsung app download to Phone... tranfer to Watch... update
B
FOTA aka over the air
Watch is Standalone NOT paired with Phone...
In Settings extra menu to update
C
Leaked Firmware packages
With Tools like
Code:
netOdin over WiFi
or for repair with USB cable
Code:
Odin
--------------------------------------------
I have NO LTE device...
So I was wondering about Threads where users asks how to update... they not receive Update not with method A nor B...
This remembers me on my old Phone... GT-I9300 aka S3...
I remember I was forced to insert SIM card... otherwise FOTA App not worked...
Maybe Samsung made something similar "amazing" to LTE devices...
LTE devices have own IMEI like Phone...
LTE devices have "SIM" aka eSIM...
All I can say... latest Firmware is leaked...
https://easy-firmware.com/index.php?a=downloads&b=folder&id=36102
You can compare with the official FOTA Server...
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R805W/version.xml
Code:
R805WVLU1[B]BSL3[/B]/R805W[B]OYV[/B]1BSL3/R805WVLU1BSL3
Changelog
https://doc.samsungmobile.com/SM-R805W/XAC/doc.html
I have this Firmware NOT on my HDD... otherwise I would share...
Best Regards
Strange that it hasnt auto updated. I have the 805W as well and it updated before i hooked it up to the network. SL3 is the latest. You may have to flash via wifiOdin. Its straight forward if you can find the firmware files. LTE in canada will only work on Bell and Telus btw.
equlizer said:
Strange that it hasnt auto updated. I have the 805W as well and it updated before i hooked it up to the network. SL3 is the latest. You may have to flash via wifiOdin. Its straight forward if you can find the firmware files. LTE in canada will only work on Bell and Telus btw.
Click to expand...
Click to collapse
I ordered a 0.99 CAD Bell sim card to see if that's enough to trigger the update. If not, my brother can come next week with his work Bell phone and I'll pull the sim card from there and reset the phone and do an update.
I didn't realize these LTE watches are basically the same as carrier branded smartphones where the carrier completely controls the firmware rollout. If you're not on the network (Bell/Telus), you can't update at all. I'm on the OG firmware, older than a lot of those leaked firmwares.
adfree said:
I know 3 ways to update...
All I can say... latest Firmware is leaked...
https://easy-firmware.com/index.php?a=downloads&b=folder&id=36102
You can compare with the official FOTA Server...
http://fota-cloud-dn.ospserver.net/firmware/XAC/SM-R805W/version.xml
Code:
R805WVLU1[B]BSL3[/B]/R805W[B]OYV[/B]1BSL3/R805WVLU1BSL3
Changelog
https://doc.samsungmobile.com/SM-R805W/XAC/doc.html
I have this Firmware NOT on my HDD... otherwise I would share...
Best Regards
Click to expand...
Click to collapse
equlizer said:
Strange that it hasnt auto updated. I have the 805W as well and it updated before i hooked it up to the network. SL3 is the latest. You may have to flash via wifiOdin. Its straight forward if you can find the firmware files. LTE in canada will only work on Bell and Telus btw.
Click to expand...
Click to collapse
Guys, I just googled the lastest firmware, and the first link actually lets you download it for free because it's not marked exclusive/feature:
https://support.halabtech.com/index.php?a=downloads&b=folder&id=41306
They actually host it on a google drive link. I can pm it to you or you guys can create your own account, but could you help me tell if a firmware is legit or not? Don't want to brick.
Inside the archive is the 4 files:
CP_R805WVLU1BSL3_CL1315275_QB14570749_SIGNED.TAR.ZIP
AP_R805WVLU1BSL3_USR.TAR.ZIP
BL_R805WVLU1BSL3_USR.TAR.ZIP
CSC_OYV_R805WOYV1BSL3_USR.TAR.ZIP
Thanks!
I have no access to this Link...
Can not download...
Best Regards
Those are repair firmwares. You don't want that. You want this:
https://easy-firmware.com/index.php?a=downloads&b=folder&id=36102
strifej said:
Guys, I just googled the lastest firmware, and the first link actually lets you download it for free because it's not marked exclusive/feature:
https://support.halabtech.com/index.php?a=downloads&b=folder&id=41306
They actually host it on a google drive link. I can pm it to you or you guys can create your own account, but could you help me tell if a firmware is legit or not? Don't want to brick.
Inside the archive is the 4 files:
CP_R805WVLU1BSL3_CL1315275_QB14570749_SIGNED.TAR.ZIP
AP_R805WVLU1BSL3_USR.TAR.ZIP
BL_R805WVLU1BSL3_USR.TAR.ZIP
CSC_OYV_R805WOYV1BSL3_USR.TAR.ZIP
Thanks!
Click to expand...
Click to collapse
equlizer said:
Those are repair firmwares. You don't want that. You want this:
https://easy-firmware.com/index.php?a=downloads&b=folder&id=36102
Click to expand...
Click to collapse
https://android.stackexchange.com/q...msung-4-filesrepairing-firmware-and-single-fi
From here, it seems that Odin should be able to flash the 4 files separately fine as well? Only diff seems to be that single file won't wipe data, but the 4 file repair will.
***
https://samsungfirmware.net/how-to-flash-samsung-firmware-using-odin/
From here, it seems that both combination and 4 can be used.
I haven't opened up odin wifi version to see if it's the same as the regular odin, but if it has the normal BL/AP/CP/CSC boxes, then that should be fine. As long as the firmware matches the model.
***
https://androidfilehost.com/?w=search&s=r805w
There is a combination file for an older one on AndroidFileHost, but it's kinda random sitting there, so I didn't want to touch it.
I was able to download... after few times of unzip... the final result looks like this:
Code:
BL_R805WVLU1BSL3_usr.tar.[B]md5[/B]
AP_R805WVLU1BSL3_usr.tar[B].md5[/B]
CP_R805WVLU1BSL3_CL1315275_QB14570749_SIGNED.tar.[B]md5[/B]
CSC_OYV_R805WOYV1BSL3_usr.tar.[B]md5[/B]
netOdin is doing selfcheck, if MD5 Hashes of tar.md5 files are correct...
I was too lazy to do this.
For me these files looks correct for SM-R805W (XAC) to flash to latest BSL3 Firmware.
Best Regards
adfree said:
I was able to download... after few times of unzip... the final result looks like this:
Code:
BL_R805WVLU1BSL3_usr.tar.[B]md5[/B]
AP_R805WVLU1BSL3_usr.tar[B].md5[/B]
CP_R805WVLU1BSL3_CL1315275_QB14570749_SIGNED.tar.[B]md5[/B]
CSC_OYV_R805WOYV1BSL3_usr.tar.[B]md5[/B]
netOdin is doing selfcheck, if MD5 Hashes of tar.md5 files are correct...
I was too lazy to do this.
For me these files looks correct for SM-R805W (XAC) to flash to latest BSL3 Firmware.
Best Regards
Click to expand...
Click to collapse
Any files with the .md5 means they are clean/legit? Samsung hashes the files and Odin will check the md5 to ensure the files are not tampered with? That sounds good... if Odin accepts, then the files should be good.
Hey guys, how are you doing.
I need your help, because i have a samsung s9 (SM-G960F) which is in a bootloop. I am trying to install a stock rom, but with all the ones that i have tried, odin has either got stuck on keystorage.img or, it has given me a secure check fail. As this occured inexpectedly, i don't know my csc code, so if any of you could find it, i will pay well.
Also, i have tried different odin version, all with the same result. And i tried all of the spanish softwares (because i am spanish)
my imei is 353467/10/733728/3
in download mode it says that FRP LOCK is on, Also OEM LOCK is too.
Thank you very much
falonsoperal said:
Hey guys, how are you doing.
I need your help, because i have a samsung s9 (SM-G960F) which is in a bootloop. I am trying to install a stock rom, but with all the ones that i have tried, odin has either got stuck on keystorage.img or, it has given me a secure check fail. As this occured inexpectedly, i don't know my csc code, so if any of you could find it, i will pay well.
Also, i have tried different odin version, all with the same result. And i tried all of the spanish softwares (because i am spanish)
my imei is 353467/10/733728/3
in download mode it says that FRP LOCK is on, Also OEM LOCK is too.
Thank you very much
Click to expand...
Click to collapse
where did you get your firmware from? try a fresh download of the firmware, the most current version of Odin, maybe try a different cable (this isnt a likely culprit) and finally a different computer. Those are basically the only things you can do in situations like these. if it was me, i would absolutely download a fresh firmware from sammobile and flash it as a first step. The sammobile link brings you to a page where you can select your country. You should be able to flash whatever countries firmware you want, but its best to flash the one that it was originally built with. You can look that up with the IMEI if you still have the box or the sticker on the back of the phone itself. Also, im thinking it could easily be the version of Odin youre using as they can be very finicky.
i littered an entire box of links in that reply for some odd reason. im bored
Edit:
also, i see this is your first post, so WELCOME to the forum!
Edit 2: i promise im gonna stop editing this post... eventually
Thx
thank you man, i will try that. quick question, is SAMFW.COM reliable? because i have been downloading the firmware from there
falonsoperal said:
thank you man, i will try that. quick question, is SAMFW.COM reliable? because i have been downloading the firmware from there
Click to expand...
Click to collapse
If you have windows. Use frija it's so much better than the rest. And it is fast
TheMadScientist said:
If you have windows. Use frija it's so much better than the rest. And it is fast
Click to expand...
Click to collapse
Frija and SamFirm are godsends! I have and use them both and i find them to be identical in speed.