Dasaita PX6 reverse camera problem - MTCD Android Head Units General

Hello,
i just bought a dasaita px6 for my 2017 toyota auris with canbus adaptor.
everything works fine, the steering wheel controls, shows me opened doors and so on.
when i shift into the reverse gear the head unit recognizes it, but only shows a yellow triangle with an ! in it. so it gets this signal from the canbus
i tried 2 aftermarked cameras, took the +12v from the reverse bulb for the camera, connected the rca cable with the first VIN from the radio, but nothing. same on the second VIN.
Has anyone an idea whats going wrong there?

Just to be sure, you connected the yellow male RCA cam cable to the female RCA cam in cable, correct? Those are the colours on my RAV4 harness, that solved my problem. Hope that helps

i connected it with a female/female adaptor directly to the bus rca cable. solved the problem by using an extra cable direct to the radio with a female rca

H4cktor said:
i connected it with a female/female adaptor directly to the bus rca cable. solved the problem by using an extra cable direct to the radio with a female rca
Click to expand...
Click to collapse
I have the same problem, could you explain what was the fix

myaws said:
I have the same problem, could you explain what was the fix
Click to expand...
Click to collapse
i had the same issue but i forgot you need to connect the yellow cables on the canbus and the harness together, one was marked cam vin . There was male and female connectors which need to be connected together.

It was all working while setting up also works some times, I don't think so an issue with initial setup. But at times when I put reverse gear display switches to show reverae camera with guide lines but instead of video there is a yellow triangle. Please advise

myaws said:
It was all working while setting up also works some times, I don't think so an issue with initial setup. But at times when I put reverse gear display switches to show reverae camera with guide lines but instead of video there is a yellow triangle. Please advise
Click to expand...
Click to collapse
Advise; read forums. This is not product support cuz.

marchnz said:
Advise; read forums. This is not product support cuz.
Click to expand...
Click to collapse
No worries, thank you just wanted to know if you come across such issue so that it helps few more.

Related

How can a cable not work for tvout?

Hello, I've bought a cable to use the TVOUT, it's a standard 3.5mm -> 3 RCA one, but whatever rca plug I try to connect to video just produces an unstable image, I can see that it looks like the phone screen, I can read the hours in the clock but the image is redish and unstable. How can I fix that? I don't see a reason for the cable being the problem because all those 3.5mm cable are exactly the same, 3.5mm in one end with 3 receptors linked to 3 rca in the other extremity.
I'm using Bionix V2, I believe it has VOODOO color, could that be the cause?
Cables for Galaxy S (I9000) dont work with Vibrant and Cappy
vlad84 said:
Cables for Galaxy S (I9000) dont work with Vibrant and Cappy
Click to expand...
Click to collapse
Based on what you say that? its exactly the same configuration of tv out.
Look in 959 video and ground pins a changed. Headset is also not working properly in 959 because it has like iphone pin-outs
vlad84 said:
Look in 959 video and ground pins a changed. Headset is also not working properly in 959 because it has like iphone pin-outs
Click to expand...
Click to collapse
link to image is giving an error
If u have the same cable as me the colors don't match up try different sockets for the plugs.
Red in yellow yellow in red.
Sent from my SGH-T959 using xda premium
JediDru said:
If u have the same cable as me the colors don't match up try different sockets for the plugs.
Red in yellow yellow in red.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
i've tried all combinations possible, that's not the problem, the strange thing is that all 3 rca plugs produce an image, distorted one. I believe this cable is bad made, like a short circuit of all 3 rca ends.
fscussel said:
i've tried all combinations possible, that's not the problem, the strange thing is that all 3 rca plugs produce an image, distorted one. I believe this cable is bad made, like a short circuit of all 3 rca ends.
Click to expand...
Click to collapse
I dont think its the cable,Its the rom assuming u are using the right settings NTSC /Pal.
its seems like itz the configuration of the ROM. Some the ROMs have this problem.
poisx7 said:
I dont think its the cable,Its the rom assuming u are using the right settings NTSC /Pal.
its seems like itz the configuration of the ROM. Some the ROMs have this problem.
Click to expand...
Click to collapse
now the very strange part, i've tried re-wiring the cable, i've tried resoring an original rom, and i get exact same problem (distorted image). I believe it must be the cable's 3.5mm plug that is deffective. it's the only explanation left.
I done mine by trial, i connect the other end on the TV and other end on vibrant and play video, then try 1 cable at a time, it takes me around 20 min to figure out correct connection with the help of paper and pen.
reick_md said:
I done mine by trial, i connect the other end on the TV and other end on vibrant and play video, then try 1 cable at a time, it takes me around 20 min to figure out correct connection with the help of paper and pen.
Click to expand...
Click to collapse
i've cut the cable and tried every possible mix and it didn't work. The only cause I can think off is that the 3.5mm plug of this damn cable is messed up, short circuited.
How old is the cable its pretty hard to find a short circuited cable.

'CAMERA PWR' Cable on xtrons head unit TD696A

Hi,
After asking on the Xtrons forum and not getting very good replies from their support staff, i thought i'd ask here.
I have a wire labelled 'CAMERA PWR' coming from one of the connectors on the head unit.
I assumed this would be a constant 12v supply for a camera, but does not appear to have any voltage on it. (checked with multimeter)
Does anyone know if it should have voltage, or is it switched in software, or does it have another function?!
See attached for images of the wiring and head unit connections
Thanks
phil001 said:
Hi,
After asking on the Xtrons forum and not getting very good replies from their support staff, i thought i'd ask here.
I have a wire labelled 'CAMERA PWR' coming from one of the connectors on the head unit.
I assumed this would be a constant 12v supply for a camera, but does not appear to have any voltage on it. (checked with multimeter)
Does anyone know if it should have voltage, or is it switched in software, or does it have another function?!
See attached for images of the wiring and head unit connections
Thanks
Click to expand...
Click to collapse
I don't know for camera pwr, but the back wire should have +12 to activate rear camera input. It might be that the camera pwr is activated
by the same back wire supplying +12 to an external camera. Connect +12 to the back wire and measure camera pwr with your multimeter.
Your screen should go blank if no camera is connected.
halloj said:
I don't know for camera pwr, but the back wire should have +12 to activate rear camera input. It might be so that camera pwr is activated
by the same back wire supplying +12 to external camera. Connect +12 to the back wire and measure camera pwr with your multimeter.
Your screen should go blank if no camera is connected.
Click to expand...
Click to collapse
Cheers, yep that's a possibility.
Next time I pull the head unit I'll try that.
Thanks
back cable
phil001 said:
Cheers, yep that's a possibility.
Next time I pull the head unit I'll try that.
Thanks
Click to expand...
Click to collapse
Hi I know its a while since you posted this, but did you connect the "back" to the 12v red cable coming from the camera? I tried this and the camera was on constant.
cheers

Pumpkin unit (Klyde 6.2" RK3066) Canbus problem ..

Hi all,
I am trying to install the above into an Audi A4 which is a canbus vehicle.
I got everything plugged in and it all looked to be working fine but after 2-3 minutes the unit always switches itself off. I have noticed the Canbus adapter always gets very hot as well just before the unit switches off.
Could I have connected something incorrectly for this behaviour to occur?
Thanks
Please be more specific.
Do you have ISO connectors?
The CanBus module should be allready wired to the comnector. It was not? If no, post the wiring diagram received (maybe you feed 12 V in a 5V input?....).
În order to get help post pictures and more info.
Hi. The fitting kit I have used is the following;
http://caraudiosecurity.com/ctkau02-audi-a4-2002-2006-complete-double-din-facia-kit
The Canbus adapter is plugged in via the attachment to the ISO cable.
Let me know if you need any pictures.
Thanks
I'm sure there is no easy way to find the problem.
I would do the following :
First make sure that all pins in all connectors are firmly in their place (see below the example).
Get correct pinout data for all connectors (Car connectors, HU, the adaptor kit and the CanBus module and also the pinout for the old stereo). When searching for the car connectors pinout make sure you find the correct one (year, model, audio system type, etc).
After having all the data you should search for any mismatch (power instead of data, different voltages, etc).
I recomend this beacuase I bumped in a similar problem with my car. I have a Mazda 6 and for the same model and year the car Hu connector differs for the Bose system version and the non Bose version, and the pinout of the adapter and Hu is not taking in consideration this posibility. Therefore I had to cut and reconnect some wires.
And one more thing : when I installed my Hu, some pins slipped out of their slots inside the connectors and my CanBus module was beep-ing constantly and the Hu was not starting at all. I had to use a very thin metal rod to push them back into position (with the connectors plugged in).
Thanks for your help. It turns out a Parrot bluetooth module was installed at some point and they have a good mess with the wiring and piggubacked onto the cars wiring. I am having to use that to power the unit now as it stops it turning off after 3 minutes. My next problem is that I don't have the steering controls option available in the settings menu. Any idea why?
If you are using CanBus you do not need that menu. The Hu has two 5V out and two inputs. If you have non CanBus Swc you need to take the 5V wire, pass it through your Swc and then to the Hu Swc input (the clasic controls usses resistors with different values for each button that atenuates the 5V from the Hu in different values for each button pressed and the Hu read that value through the swv input). So if your 5V wire and Swc input is not connected, you will not have the menu available. Once connected you must first go to factory menu and define each button (see the user manual))
Marmalux said:
If you are using CanBus you do not need that menu. The Hu has two 5V out and two inputs. If you have non CanBus Swc you need to take the 5V wire, pass it through your Swc and then to the Hu Swc input (the clasic controls usses resistors with different values for each button that atenuates the 5V from the Hu in different values for each button pressed and the Hu read that value through the swv input). So if your 5V wire and Swc input is not connected, you will not have the menu available. Once connected you must first go to factory menu and define each button (see the user manual))
Click to expand...
Click to collapse
Thanks. I've attached some pictures to show how the unit is connected to the Canbus adapter.
Key1 5V is connected to its equivalent going to the Canbus adapter.
Key2 5V is as above
GND is as above
Do I have it correct and am I just required to correctly map the buttons now?
Thanks
Still can't get this working.
Should I reset the headunit, update MCU and software or does it look like my wiring is wrong?
Thanks
No one can help you without being there. If you do no have the skills to do it yourself you should go to a electronics service.
As I said, you have to analyze all data. You must get all pin-outs and characteristics for your car.
You must know if your Swc is resistive or Can-bus.
With the car main stereo connectors pinout you will see what you have (resistive Swc, Can-bus wires, external amp signal, etc) and theirs place in the connector.
With the Hu pinout you will know what does the Hu can provide and what pins you should use.
And in your case you have a adapter in the middle, for witch you also need the pinout to make sure that everything is routed correctly.
After you have a clear diagram for your car you must check if fizicaly everything is as it should be.
How to get the pin-outs?
The Hu pinout should be on a sticker on the Hu itself.
For the car connectors you must first decode you vin and get info like year, options, version (usualy a more detailed pinout you find if you search the old stereo pin-out by it's exact make and model).
And for the adapter you must get it from the seller or from the Internet.
You said that before you, someone made modifications to wiring; this is one more reasons to get all informations and make yourself a clear wiring diagram for you to be able to start troubleshooting.
I realy wish I could help more but I can't, and there is nobody else that can give you help without being there to see (otherwise it would allready said sommething)
Best regards!

Dasaita rear camera not immediatly working

The Dasaita V600 does not switch on the rear view camera until the multimedia is turned on. the front parking camera displays immediately. the rear parking camera motor does not work until the dasaita v600 main screen is turned on What could be the reason? this is very bad. the car is running, the rear camera does not display images for 35 to 40 seconds until multimedia is turned on. the front parking camera gives the image immediately without waiting. There is no such problem for the multimedia of other brands. I thought of it as a software
Help Me
does every user have the same problem? the park camera will not work to start the car and move back and forth immediately. Wait for 40 seconds to turn on and then move on. this is ridiculous.
muratemre444 said:
The Dasaita V600 does not switch on the rear view camera until the multimedia is turned on. the front parking camera displays immediately. the rear parking camera motor does not work until the dasaita v600 main screen is turned on What could be the reason? .
Click to expand...
Click to collapse
Faced this issue on my Dasaita HA2021-V600 but in my case a little work on canbus wires solved the problem.
Looking at connection diagram on top of your head unit you need to search a wire named "Reverse", in my case the wire the nr. 2 in orange color.
This wire in directly connected to canbus box; cut that wire and connect it from head unit side to +12V from reverse lamp.
After that you will see immediatly camera images when you put your car in reverse gear.
Now my turn for a question: what type of front camera are you using and how you have connected it to head unit and which harness you have used?
Hope my suggestion can help you
P.S.: Make that at your risk, im not responsible for whatever damage on your unit with my "mod".
iRcKenny said:
Faced this issue on my Dasaita HA2021-V600 but in my case a little work on canbus wires solved the problem.
Looking at connection diagram on top of your head unit you need to search a wire named "Reverse", in my case the wire the nr. 2 in orange color.
This wire in directly connected to canbus box; cut that wire and connect it from head unit side to +12V from reverse lamp.
After that you will see immediatly camera images when you put your car in reverse gear.
Now my turn for a question: what type of front camera are you using and how you have connected it to head unit and which harness you have used?
Hope my suggestion can help you
P.S.: Make that at your risk, im not responsible for whatever damage on your unit with my "mod".
Click to expand...
Click to collapse
Hello. To attach the front camera to the car, first go to the factory settings. Activate the camera in the last section there. how many secs you want to see. then buy and install any front rear camera.
Place the cable in the D. aux in glass on the device. now the front camera will help you when you leave the back cabin during each parking.
Thanks for your reply, but i dont understand what you said in:
muratemre444 said:
Place the cable in the D. aux in glass on the device.during each parking.
Click to expand...
Click to collapse
Can you explain better please?
Now your rear camera is working right?
iRcKenny said:
Faced this issue on my Dasaita HA2021-V600 but in my case a little work on canbus wires solved the problem.
Looking at connection diagram on top of your head unit you need to search a wire named "Reverse", in my case the wire the nr. 2 in orange color.
This wire in directly connected to canbus box; cut that wire and connect it from head unit side to +12V from reverse lamp.
After that you will see immediatly camera images when you put your car in reverse gear.
Now my turn for a question: what type of front camera are you using and how you have connected it to head unit and which harness you have used?
Hope my suggestion can help you
P.S.: Make that at your risk, im not responsible for whatever damage on your unit with my "mod".
Click to expand...
Click to collapse
Hi,
I am having quite the same probem with my dasaita.
when I switch to reverse I can only see a black screen with the green guides and a sort of yellow alert.
Can you tell me the color of the +12V reverse lamp wire? did you find it behind the unit or you cought that +12v from the reverse bulb behind the car?
thank you
Mirko
MirkoCrb said:
Hi,
I am having quite the same probem with my dasaita.
when I switch to reverse I can only see a black screen with the green guides and a sort of yellow alert.
Can you tell me the color of the +12V reverse lamp wire? did you find it behind the unit or you cought that +12v from the reverse bulb behind the car?
thank you
Mirko
Click to expand...
Click to collapse
If you are facing that issue you simply need connect the yellow RCA cable from you rear camera to the right RCA connector in your head unit, you dont need perform any modification on HU wires; that RCA wire is usually labeled CAM-IN or Rear-IN. Check you connection
Also if you connection are OK the camera is not supplied with +12V and you need use the wire that come from the reverse lamp
iRcKenny said:
If you are facing that issue you simply need connect the yellow RCA cable from you rear camera to the right RCA connector in your head unit, you dont need perform any modification on HU wires; that RCA wire is usually labeled CAM-IN or Rear-IN. Check you connection
Also if you connection are OK the camera is not supplied with +12V and you need use the wire that come from the reverse lamp
Click to expand...
Click to collapse
I tried that already. I think it's a problem with the cables. I contacted the Dasaita Support and suggested to work on 2 pins of the canbus.
thank you
MirkoCrb said:
I tried that already. I think it's a problem with the cables. I contacted the Dasaita Support and suggested to work on 2 pins of the canbus.
thank you
Click to expand...
Click to collapse
Not a probl with canbus. The only problem that canbus can do is "not switching on reverse gear". When you see the yellow "!" mark on screen mean that unit is not receiving video signal from camera.
Try this for checking the camera: connect the yellow RCA cable from reverse camera to AUX-Video IN harness and use AVIN app if you see images the camera is OK if not you need to check camera connections.
Cable 2 from canbus trigger only the "rear view" if the unit is not switch to reverse input.
What are the canbus setting on you factory setting menu? you car is an E46? what type of main connector are you using 17 or 40 pins?
iRcKenny said:
Not a probl with canbus. The only problem that canbus can do is "not switching on reverse gear". When you see the yellow "!" mark on screen mean that unit is not receiving video signal from camera.
Try this for checking the camera: connect the yellow RCA cable from reverse camera to AUX-Video IN harness and use AVIN app if you see images the camera is OK if not you need to check camera connections.
Cable 2 from canbus trigger only the "rear view" if the unit is not switch to reverse input.
What are the canbus setting on you factory setting menu? you car is an E46? what type of main connector are you using 17 or 40 pins?
Click to expand...
Click to collapse
ok will try.
I don't know my car type..it's a Nissan Qashqai
problem solved
problem solved. the original camera was removed and replaced with another camera. electric power was taken as 12v from parking light. As the original camera was 6v and powered from the unit, the rear camera was not working until multimedia was turned on. everything works fine now
Max 6 wrx rear camera
I am having the same issue on my 2018 wrx limited. When I put it in reverse I get the yellow ! Or see a black screen with the guides. If I go to the AV in , I am able to see the reverse camera image. I have the Dasaita Max 6 (px6). Any assistance would be amazing!
zimbelj said:
I am having the same issue on my 2018 wrx limited. When I put it in reverse I get the yellow ! Or see a black screen with the guides. If I go to the AV in , I am able to see the reverse camera image. I have the Dasaita Max 6 (px6). Any assistance would be amazing!
Click to expand...
Click to collapse
Try plugging the reverse camera into the reverse camera input?
marchnz said:
Try plugging the reverse camera into the reverse camera input?
Click to expand...
Click to collapse
I tried that and tried every combination that I could think of with the Various RCA cables - just the yellows, all the rca connections, the different yellows. I think it may in an issue with whatever wire from the car that triggers the camera when it is put in to reverse.... I read somewhere that the harness provided from Dasaita may have an empty pin hole where that wire should be. I am not savvy enough to know. Thanks for taking time to try and assist. Any other tips to try? could this be a voltage issue?
muratemre444 said:
Hello. To attach the front camera to the car, first go to the factory settings. Activate the camera in the last section there. how many secs you want to see. then buy and install any front rear camera.
Place the cable in the D. aux in glass on the device. now the front camera will help you when you leave the back cabin during each parking.
Click to expand...
Click to collapse
I dont understand this. I also have android PX3, Back camera works as I put in reverse. Connected front camera tu AVIN, settings set to "enable front camera for 15sec after reverse". But I only see black screen.
When Manually open AVIN I see front camera, how do I enable this?
Thanks
Hello,
ich had also problems with the rear cam and that's what solved the problem in my case!
https://forum.xda-developers.com/an...s-general/wired-rear-cam-issue-fixed-t3964902
Best regards
Hi there everybody,
I recently noticed my PX6 unit doesn't see any of the front / rear cameras. With all wires connected the f-cam app shows the orange triangle (no signal) for both front and back cameras. The same happens if I give a 12v signal to the reverse (pink) wire.
I never got to install the backup camera in my car but I did bench tests with a power source and had the cameras working when I first got the unit. Now, a few months later, the cameras simply don't work
I tested with 2 different cameras and also with a DVD player and none worked.
I even opened the unit and checked the motherboard to see if there is a fried circuit or IC...and saw nothing. The video inputs lead to a IC labeled "FMS6502" and the signal gets to it through a 75ohm resistor and a capacitor which both look okay.
What can it be?
Please give me your opinions on this as it drives me crazy !
Thank you!
I would guess your headunit is not providing the 12 volts to both cameras
Hi , I remember your Fcam app requires you to connect your front view camera to your f cam video input and provides thru another lead a 12 volt output in which you can conect the power for both your front and rear camera. If both cameras dont work most possible the radio is not providing the 12 volt output .
cflaviu said:
Hi there everybody,
I recently noticed my PX6 unit doesn't see any of the front / rear cameras. With all wires connected the f-cam app shows the orange triangle (no signal) for both front and back cameras. The same happens if I give a 12v signal to the reverse (pink) wire.
I never got to install the backup camera in my car but I did bench tests with a power source and had the cameras working when I first got the unit. Now, a few months later, the cameras simply don't work
I tested with 2 different cameras and also with a DVD player and none worked.
I even opened the unit and checked the motherboard to see if there is a fried circuit or IC...and saw nothing. The video inputs lead to a IC labeled "FMS6502" and the signal gets to it through a 75ohm resistor and a capacitor which both look okay.
What can it be?
Please give me your opinions on this as it drives me crazy !
Thank you!
Click to expand...
Click to collapse
Megv6265 said:
Hi , I remember your Fcam app requires you to connect your front view camera to your f cam video input and provides thru another lead a 12 volt output in which you can conect the power for both your front and rear camera. If both cameras dont work most possible the radio is not providing the 12 volt output .
Click to expand...
Click to collapse
What. You've just said, connect the front and rear camera and the +12v feed. The headunit doesn't provide a 12v output for the cameras.
Not surprised at the guess, these topics generally are guessing games.
I'd suggest finding a skilled car audio tech or auto electrician. That's not meant to be an oxymoron, seriously

Reverse camera on Kunfine Head Unit

Hi All
I bought a Kunfine head Unit and a aftermarket reverse camera. I hooked up the reverse camera to the reverse light and ran the cable to my Kunfine android 10 head-unit. My Head-unit does not have a dedicated reverse camera Socket for my RCA cable coming from the reverse camera. So I plugged it in to the CCVB and i got an Image, but i have to select AUX on my head unit to see the image from my reverse camera. The unit also dont have a dedicated wire to fit to the reverse trigger wire. Can anyone tell me what i must do in order for the reverse image to come up on my android unit as soon as i put my car into reverse. There are no "back" or "reverse" wires on my head-unit canbus... Please help. I will really appreciate it.
Thanks
Peet13 said:
Hi All
I bought a Kunfine head Unit and a aftermarket reverse camera. I hooked up the reverse camera to the reverse light and ran the cable to my Kunfine android 10 head-unit. My Head-unit does not have a dedicated reverse camera Socket for my RCA cable coming from the reverse camera. So I plugged it in to the CCVB and i got an Image, but i have to select AUX on my head unit to see the image from my reverse camera. The unit also dont have a dedicated wire to fit to the reverse trigger wire. Can anyone tell me what i must do in order for the reverse image to come up on my android unit as soon as i put my car into reverse. There are no "back" or "reverse" wires on my head-unit canbus... Please help. I will really appreciate it.
Thanks
Click to expand...
Click to collapse
Is it an MTCB unit? What is the MCU version?
marchnz said:
Is it an MTCB unit? What is the MCU version?
Click to expand...
Click to collapse
Yes...
Peet13 said:
Yes...
Click to expand...
Click to collapse
It's not an MTCB, try searching for your MCU version and posting in the Android Head Units forum.

Categories

Resources