Related
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
DanBergundy said:
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
Click to expand...
Click to collapse
Woman + X = No longer functioning properly
illogic6 said:
Woman + X = No longer functioning properly
Click to expand...
Click to collapse
:X
Another funny thing is she said her boss at work has the same problem (female) and her husband has no issue.... Ha! I don't think they have Evos though.
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
freaknjoe said:
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
Click to expand...
Click to collapse
Weird! Does the screen actually turn on then? I should watch the screen next time she makes a call on it.
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
freaknjoe said:
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
Click to expand...
Click to collapse
I see, thanks.
My wife had the same issue...earrings.
Yep, Yep. My wife has the same issue but I've never had a problem. I'm going to show her this thread so that at least she knows it's not just her. lol.
Lappie2010 said:
My wife had the same issue...earrings.
Click to expand...
Click to collapse
How would the earrings affect it?
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Crotchety said:
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Click to expand...
Click to collapse
During a call, I pulled the phone away, moved it around, etc and watched for screen to come one. It did not come on easily. I don't get it.
I need to watch her during a call and test some things.
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
ReFLeX135 said:
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
Click to expand...
Click to collapse
Still not sure what the issue/solution even is.
She picked up my phone last night and accidentally hung up on the person during the call! I didn't get a chance to see what happened...
She's starting to hate these phones. I need a solution.
Not a joke...but are these ladies blonds? At start of thread I was thinking hair color or earrings too. But earrings shouldn't impact the sensor as it is up top of phone and earrings would be down toward the screen.
But...if their hair was very light color...and they had phone only loosely pressed to head, I could 'guess' that the hair had enough light reflecting through it to set off the sensor.
Another thing to check on the earring side....what part of phone contacts first...do earrings hit the screen before head covers up the sensor?
My wife had dark brown hair :x
My wife too. Dark brown hair. With and without earrings. Swapped out one device, same problem. She even made it happen on mine.
I have seen it get in a mode where the proximity sensor seems to get reversed. Near head, screen on, away from head screen off. A button gets pushed at some point and then when the screen is on you can't un-mute, un-speaker, or answer a returned call from the one she just hung up on.
I think we are going to have to get her a different phone
I have the same issue but it only seems to come up with AOSP ROM's (Cyanogen & UD)
If I call Sprint and hit the prompts followed by putting the phone to my ear it presses other numbers. I think there is a delay in the proximity sensor that's causing this. I don't have long hair and my face is clean shaved so it's not that.
If I go to show someone that when everything works perfect. It's like when you call tech support for Dell, Netgear, etc. It works when you're on the phone with them and when you get off it doesn't.
I've noticed this in the past. If you are talking on the phone and you cant it just a little bit away from your ear, towards your face, you can see the backlight come back on. Also, hair can carry a static charge. So if your ladies cant the phone and the screen turns on, their hair could trigger a button press.
Hi to all,
A couple of days ago I noticed that when I answered a call the colors of the screen looked bad, and I didn't pay attention to it.
Now my screen has transparent horizontal lines which are pretty visible, kind of like interference you get in computer screens when you take a picture of them.
I would like to mention that I haven't dropped the phone even once.
I'm considering doing a factory resest in hopes that it will solve the problem, but I doubt that it is a software issue.
What do you guys think?
Please advise
Itay
Sounds like a broken screen to me. And definitely like a warrenty case. Restore stock f/w if you have flashed and return it.
Restore the original firmware (if you have flashed the phone) and call the samsung service for the assistance.
the thing is that now I don't see it at all.
It's as if it came and gone.
I disabled my task killer and juice defender, performed a complete titanium backup, in case I want to restore afterwards, and now everything is normal.
It does sound like a hardware issue, but do you think there's a chance it is software related?
I'm asking because I purchased it in europe, and I don't live there, so sending it for repair is something I would rather avoid.
Of course, if it is indeed 100% hardare issue, I have no choice.
That is why I'm asking, to be certain and to see if there are others who experienced this issue.
Your replies are much appreciated
update:
It appeared again -> Did a Factory Reset -> It's still there -> Sending for repair.
Must be a hardware issue.
Thank you for your replies.
I've actually always had slight screen issues with my Galaxy S also. The screen flickers slightly once in a while. I don't know if the radio is actually the cause but it's the kind of thing you might expect from radio interference.
Has anybody else noticed this?
Benjamin Dobell said:
Has anybody else noticed this?
Click to expand...
Click to collapse
Nope, never seen any flicker. My screen seems to have a defect of it's own though, but I'm not sure if it's worth the effort to send it in, because I imported mine from the UK while I live in South Africa.
When in the sun or under bright light I can see a two vertical lines near the sides and a horizontal line on dark/black colours and when the screen is off. As if those pixels have a grey/brown tint to them. The line is mostly one pixel thick but in places it is two pixels.
They are almost impossible to see unless under sunlight where they are clearly visible where the screen is black.
Does anyone else see this or know anything about it?
Edit: Apparently it's just the motherboard or something visible through the screen and they all have it, so I'm worrying about nothing...
That's interesting...
It used to come and go, but I think now it's here to stay.
It's really annoying and the screen, while usable, is really not a pleasant sight to look at.
I've attached some photos showing the problem.
With a normal screen I would say that it looks that way because that's what you see when you photograph a screen of an electronic device, but the sad thing is that what you see in the picture is exactly what I'm seeing now.
I did a factory reset, so it's in german now.
I heard some Droid X had a similar problem, but didn't know Galaxy S was having it as well.
In any event, can you confirm that after a factory reset, I no longer have root access?
Just making sure so that they don't give me problems with the warranty.
seem like the phone was dropped, and the screen got damaged
the connectors are lose
double posted again....
Really?
That's very weird...
The only time it was "dropped" was from half a meter , it didn't fall directly but partially sideways, it was with a case, and it landed on its back, not on the screen.
I wouldn't even call that a fall.
Unless, someone in my family dropped it without telling me...
Either way, I think there's no escape but to send it to repair.
If you think it's a problem with the connectors, would you try and give it to some local lab to try and fix it or send it to samsung for replacement?
I faced similar problem.
This problem only occurs when I use the phone in 2g mode.
there are occasions whereby the signal bar for 2g is full and when I place the phone near some conductive surfaces the lines becomes very obvious, to the point of irritating.
nit sure if anyone has such problems too
I have same problems with horizontal lines.
I never paid attention if i am on 2g or 3g when it happens. I will now.
Edit: rooted on jm5
-------------
It seems that my phone too has started to do the same thing since last night.
I have called Samsung and am waiting to hear from them now.
I hope this is a thing covered in the warranty.
I have reverted to the local ROM for India and have deleted everything on my device.
Yet it shows lines flickering like you can see on old computer monitors.
Its not as bad as the ones on the attachment above but it is starting to annoy me.
It usually happens when the screen is completely filled with a single color except black.
Eg. When you pull down the notification tray down.
Also I seem to notice that when the wifi is off, it stops.(I dunno maybe a placebo effect)
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
itaykoren said:
aditya_t90 ,
I have sent it to Samsung for repair, and they should tell me in the coming days exactly what the problem is and whether it can be fixed under warranty or not.
I will update as soon as I hear from them.
Until then, try to see if it changes when you hold the phone differently, for example if you grip it more firmly or hold it in another way.
Click to expand...
Click to collapse
When did you send it in and when did they receive it(if you were not there when they got it).
Also how long has it been without your phone?
The samsung service center is shut in my area today.
I will go to them tomorrow and get this sorted out.
Its not like the phone was cheap or anything.
I actually sent it to my uncle in Germany because it was purchased there.
He went to the store where he bought it and the store owner immediately sent it to samsung and said that probably by this Tuesday or Wednesday (so tomorrow or in 2 days) he will get an answer from them and see what's going on.
aditya_90 ,
Just to let you know that Samsung are sending me a new phone to replace the damaged one.
I sent in my phone for repairs and they replaced the LCD module. The problem is now gone.
I suggest that you should do the same while the warranty still holds since it appears to be the LCD that failed somewhat.
Hi guys, recently I've been having quite an issue with my Wildfire S. It worked fine, rooted S-ON with CM7.2RC from alquez, until one day.
It all started two weeks ago when I was on one open air party where a thunderstorm overwhelmed me and left me completely wet. I've been terrified of that day before cause WFS is my first smartphone and I've been wondering how would it react on water. Maybe there is no causality between this, idk.
But since then, everytime somebody called me, the display shut off and after the call has ended, I couldn't awake my phone by normal means - the on/off button didn't work, so I started using quite dumb solution - a hard reset with taking off battery and putting it on.
(then I figured out that it could be awaken by plugging it to USB)
quite stange issue, isn't it?
I did a factory reset and flashed the CM again on clean. The frequency of a dead display has lowered down to every two calls appr. but it was still happening. Today, finally, I took off and on the battery again and that somehow did a factory reset... that's it, I have to solve it.
I'm quite worried it has something to do with HW (after becoming wet). However, if I'm not calling, it WORKS FINE!
Anybody can say anything about this?
Crusheer said:
Hi guys, recently I've been having quite an issue with my Wildfire S. It worked fine, rooted S-ON with CM7.2RC from alquez, until one day.
It all started two weeks ago when I was on one open air party where a thunderstorm overwhelmed me and left me completely wet. I've been terrified of that day before cause WFS is my first smartphone and I've been wondering how would it react on water. Maybe there is no causality between this, idk.
But since then, everytime somebody called me, the display shut off and after the call has ended, I couldn't awake my phone by normal means - the on/off button didn't work, so I started using quite dumb solution - a hard reset with taking off battery and putting it on.
(then I figured out that it could be awaken by plugging it to USB)
quite stange issue, isn't it?
I did a factory reset and flashed the CM again on clean. The frequency of a dead display has lowered down to every two calls appr. but it was still happening. Today, finally, I took off and on the battery again and that somehow did a factory reset... that's it, I have to solve it.
I'm quite worried it has something to do with HW (after becoming wet). However, if I'm not calling, it WORKS FINE!
Anybody can say anything about this?
Click to expand...
Click to collapse
It sounds like the proximity sensor got wet. Normally, i'd tell you to take the case and battery out and leave it all in a bucket of uncooked rice for a day to pull out the moisture. But beings that this has been awhile, idk if it will help
BigChillin said:
It sounds like the proximity sensor got wet. Normally, i'd tell you to take the case and battery out and leave it all in a bucket of uncooked rice for a day to pull out the moisture. But beings that this has been awhile, idk if it will help
Click to expand...
Click to collapse
I was thinking about something like that too (since I have very little expertise at smartphones). Could I disable it for calls somehow? (what would it do to normal use?)
As far as I know there is no actual setting to disable it. If you were a code ninja (or knew one) i'm sure they could. And it would just mean that you would have to manually turn it off to talk on the phone. But, we're not sure that's the problem. So, I personally would try the rice and hope for the best.
BigChillin said:
As far as I know there is no actual setting to disable it. If you were a code ninja (or knew one) i'm sure they could. And it would just mean that you would have to manually turn it off to talk on the phone. But, we're not sure that's the problem. So, I personally would try the rice and hope for the best.
Click to expand...
Click to collapse
Thanks for your help mate. You told me about the proximity sensor - which I googled and this popped out - http://forum.xda-developers.com/showthread.php?t=951858
"Screen does turn off when holding to face on a call, but fails to come back on, requiring taking out the battery"
I may have found a solution. Thanks again!
I hope so. If not, just come back and light this topic up again
Well, it seems my enthusiasm was premature as the app doesn't work on WFS. I tried a factory reset & flash once again, called from my gfs phone to mine and it happened again:
Even though I didn't put the phone to my ear, the display went black and after the call has ended, it hasn't awaken.
I'll try the rice, but damn, I don't understand it at all.
Crusheer said:
Well, it seems my enthusiasm was premature as the app doesn't work on WFS. I tried a factory reset & flash once again, called from my gfs phone to mine and it happened again:
Even though I didn't put the phone to my ear, the display went black and after the call has ended, it hasn't awaken.
I'll try the rice, but damn, I don't understand it at all.
Click to expand...
Click to collapse
I don't get it either. The only thing besides it being dead that i can think of is that there's still moisture in the lens or something causing the sensor to trip (or not in this case).
I may have found another solution, but I don't understand it at all. http://forum.gsmhosting.com/vbb/f634/solved-wildfire-s-proximity-sensor-problem-1413248/#post8066168 Could you translate it to normal language, if you think it could be the fix?
That actually seems good. It basically says to get JTAG manager, and rewrite the broken nand files with the working ones at the bottom of the post. It IS a pretty advanced operation though, and it seems you would have a pretty good chance to brick your phone if you don't follow it to the letter.
I guess CM has an option to turn proximity off. Try that maybe?
Try a different rom.
Sent from my HTC_A510c using XDA App
So i have an H812 model and last year i had the dreaded boot loop issue but got it fixed under warranty and no issue since with that. The issue that is irritating the hell out of me now is that the double tap to turn screen on just stopped working reliably. It barely ever works.
I've tried the sensor calibration from the hidden menu and i have a question about that also. My sensor acts like it calibrates fine but the # next it seems kinda low (# next to proximety cal pass ...). It's around 48. See screenshot for reference taken from xda https://forum.xda-developers.com/attachment.php?attachmentid=3513220&d=1445359160
Has my sensor just crapped out? and if so, is that normal. Any help would be appreciated, i've gotten so addicted to using that feature that people ask me what the hell i'm doing when i try to turn their phones screen on lol.
Edit: No screen protector on btw and the internal board as far as i can see seems fine too. And the double tap to turn screen off works fine.
Thanks
sunster said:
So i have an H812 model and last year i had the dreaded boot loop issue but got it fixed under warranty and no issue since with that. The issue that is irritating the hell out of me now is that the double tap to turn screen on just stopped working reliably. It barely ever works.
I've tried the sensor calibration from the hidden menu and i have a question about that also. My sensor acts like it calibrates fine but the # next it seems kinda low (# next to proximety cal pass ...). It's around 48. See screenshot for reference taken from xda https://forum.xda-developers.com/attachment.php?attachmentid=3513220&d=1445359160
Has my sensor just crapped out? and if so, is that normal. Any help would be appreciated, i've gotten so addicted to using that feature that people ask me what the hell i'm doing when i try to turn their phones screen on lol.
Edit: No screen protector on btw and the internal board as far as i can see seems fine too. And the double tap to turn screen off works fine.
Thanks
Click to expand...
Click to collapse
Is the little black rubber plug in the prox sensor. They may have forgot to put it back in. This little black plug is required for proper prox sensor to function properly.
Thnaks for the response but It worked perfectly for quite some time after the board was replaced by the service center so don't think that's it.
I'm guessing you dropped your phone. That's the problem
deltadiesel said:
I'm guessing you dropped your phone. That's the problem
Click to expand...
Click to collapse
Sorry man, never got an alert to this but better late than never . Can't recall but i might have. Why would you say that? Is there a possibility something moved or broke or just plain got whacked out of place? Of course the issue is still there. I was thinking about opening it up anyways so i'll take a look. Thanks
sunster said:
Sorry man, never got an alert to this but better late than never . Can't recall but i might have. Why would you say that? Is there a possibility something moved or broke or just plain got whacked out of place? Of course the issue is still there. I was thinking about opening it up anyways so i'll take a look. Thanks
Click to expand...
Click to collapse
So i opened it up and checked the rubber piece just to make sure and it's there. Everything else looks ok. I guess the sensor just crapped out and will just continue to live with it.
This problem just started today, I've done nothing with settings, have not installed any apps recently, did not drop it, expose it to water, or anything that could possibly cause damage. What's happening is that basically about 1 inch-1 inch 1/8 of the bottom of the screen turns black, and at almost random, sometimes it could go a minute and half or so, sometimes 30 seconds, sometimes within 5 or less seconds. The strangest part? The part that goes black still operates fine to touch, so if an icon or letter of the keyboard, or whatever, is located in that area, it can still be selected/operates. Taking a screenshot to try to show it is worthless since it'll show the screen as just fine, so I attached a picture and a video of the problem from an old phone of mine. The blacked out are will go right back to normal if you turn the screen off, wait a second, and turn it back on. Also, if the blacked out area is there, it'll go away after about a half a second when the screen dims right before the screen inactivity turns the screen off. I've only had this phone for a couple months, I got it back on December 7th 2019.
I learned something else. If I manually lower the brightness to a particularly low level, the black goes away, so it seems to in some strange way be related to the phones brightness level (I use auto brightness), this also might explain why the black comes at differing intervals, as my brightness is adjusting constantly to my surroundings, the time before it comes is either shortened or lengthend based on the brightness.
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
I was just thinking I might have to do factory reset, if that doesn't work, and it needs repair/replacement, do I go to an authorized Samsung repair place (I know I have one within about a couple miles of my house), it's
obviously well within warranty, or take it to At&t store as I do have that AT&T Protect Advantage coverage for my phone?
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Did the factory reset, turned out to be a waste of time. That black bar was showing immediately, right at the setup screen. So I guess it's safe to say that it's a hardware issue, defective whatever. Funny story is that when I bought this phone, my att store only had two of them left, one was immediately defective, it wouldnt get past the main logo screen, and now I got this one and it became defective within just a couple months, got to love it.
willhemmens said:
It doesn't seem that strange that the touch still works in that area as the digitiser and the display are two different things. I would factory reset (because Samsung will make you do this anyway) and if still an issue, take it directly to Samsung, that does not look good.
Click to expand...
Click to collapse
Just left AT&T store where I initially purchased the phone. They're shipping out a brand new note 10+ to me today and I'll get it tomorrow ?
Glad to hear! That definitely sounded like faulty hardware. Funny you saw two failures, I guess it will happen with such complex devices.
Note 10 plus screen goes black
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.
Tech girl99 said:
Hi i thought i was crazy until i saw your thread. The same thing is happening to me but it does not go continuously so id see two red squares first theyre really small and they appear anywhere on the screen then if try to screenshot them they show upblack in the screenshots instead of red . I just need to know if anyone found a solution yet because my phone came with the warranty booklet but it wasnt filled out.
Click to expand...
Click to collapse
You just need the proof of purchase, or, if you got it on contract, the contract itself will suffice