The mobile radio power is not turning on i think its permanently turned off some how....i mean there is no network on my sim card in this phone...my ohone got bricked and i flashed it using edl command and fastboot mi flash tool after that this problem started...but before that everything was alright...now whats can i do..?? Please kindly help me....:crying::crying::crying:
I just updated my device to v10.0.15 and same thing happened.
Rom: Stock v10.0.15 (Non-Rooted, Locked)
I did factory reset, network reset, i changed the sim, turned on safe mode and turned on-off airplane mode no luck. Sim works on another device but not on Mi A2 Lite. When i restart the device it asks Sim Password but phone says No Service.
If there is anyone who didnt update to v10.0.15 think twice.
this needs to be seen if true, bumping
Iquram0987 said:
The mobile radio power is not turning on i think its permanently turned off some how....i mean there is no network on my sim card in this phone...my ohone got bricked and i flashed it using edl command and fastboot mi flash tool after that this problem started...but before that everything was alright...now whats can i do..?? Please kindly help me....:crying::crying::crying:
Click to expand...
Click to collapse
Maybe the latest version has a new Radio version and it somehow messed your NVRAM, but I know this problem was well known for Mediatek devices not Qualcomm.
For my Mediatek devices the procedure would be the following:
-Get a IMEI Writing tool
-Boot up the phone to take a screenshot to Wi-Fi MAC and BT MAC
-Shut down
-Get a memory address database file for that SoC
-Fire up the program, set to write IMEI1/2, Wi-Fi and BT and fill out with the data from the box/screenshot
-Start up the phone in preloader mode and write the data to NVRAM
Now for qualcomm I don't quite know the procedure but I believe it's the same. You can also write IMEI's via Engineering Mode which should be built in your stock OS.
Command for SIM1: AT+ EGMR=1,7,”your imei”
Command for SIM2: AT+ EGMR=1,10,”your imei”
But to be frank with you, I don't know how permanent the second solution is.
On Mediatek the first solution sometimes fails when the phone battery is low. After charging IMEIs fail to show up and I have to sometimes reboot the phone to get it working again. But this behavior is only visible on custom recovery and rom, on stock it seems to be permanent.
Also check this link, there are multiple videos on youtube pointing to this tool: https://www.getdroidtips.com/restore-imei-network-or-radio-on-qualcomm-devices/
Related
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
In the past I have a problem with media scanner message, always running in the background, although I had no problems about rebooting or soft-resets, it was only a message running in the background always. The way I solve it was to go into "almacenador de medios" (dont know in english, maybe something like "media store") in app manager, and then force stop, clean data and clean cache, reboot and after a first past again, all went ok. I suppose you continue with the message after reseting maybe because cache or dalvik cache is not clean.
Hope that help.
pr0_eMoTIoN said:
hi2all
before post this thread i cheked all xda but anyone method did not help me
my problem is "scanning media files"
one day when i serfing inet my E975 has been rebooted
after load i got a first time boot start message
all data lost and phone ask me to set all setting from beginning
now i see alltime 'scanning media files'
I have tried the following: steps:
made hard resets - no effect
flashed using KDZ updater (E97510C_00, E97510a_00 E97510f_00) - no effect
used LGtool (selected recovery..inserted my IMEI and load) - no effect
and followed this http://forum.xda-developers.com/show....php?t=2010624
but problem haven't solved
always media scanning
cant try any ways like fleshing kernel, becose need fastboot mode
cant unlock fastboot, cos cant make root... anyone way to install root not work, cos no access to phone storage
someone told me i can try to do root with adb shell... but cant find how i can use this in my sutuation
I would be very thanksfull any help
i rly dont know what should i do next....
Click to expand...
Click to collapse
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
MafiaGR said:
have you tried the lg pc suite?go to lg's site and download it and the connect your phone to pc in "pc suite" mode.then from there you can do an update or press the "emergency firmware recovery" under device menu.This will propably recover your phone.
Click to expand...
Click to collapse
already tried this
but problem havnt solved after "emergency firmware recover"
anyone knows how i can made root without access rights to sd card?
ways like "frameroot.apk" and via bat file "currentroot.bat" - not worked (all those methods need access to sd card)
or maybe there are any commands on ADB to reset or fix sd card?
i'm rly sad with my problem....
what is the model of your phone and ROM?
did You try go back to stock rom with LGMobile Support Tool?
I have same problem but it occurs when I flash to E97510D ROM (my phone is F180K):
http://forum.xda-developers.com/showthread.php?t=2246867
when I want to fix it, I make emergency firmware recovery in LGMobile Support Tool (and factory reset after this).
Maybe your motherboard is giving up
no... every time I go back to stock ROM, its working fine
bihslk said:
Maybe your motherboard is giving up
Click to expand...
Click to collapse
i think this is rly...
cos i have tried already all ways...
Hi everyone ,
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you
Hi again
So after many test ( and break and unbreak the soft many times) by editing prop and conf files, i noticed that the ro.runmode is the command controling the boot mode.
But i don't know were is this command and if it's possibol:
- To force ro.runmode=normal?
- Or any solution to by pass runningtest3 app or to fake the result?
Thank you (any help are welcome i don't worry about bteaking the phone)
Finally the phone is fully dead ?
After many flash factory, stock and custom i decided to find the way to enter to hs-usb 9008 mode and i find,by flashing the phone with cherry honor 4 rom. And the phone rebooted in 9008 mode, than flashed the ddr and the msm8936 file with zte tool. The msm will not finish and the phone reboot in fastboot (with red, green,blue screen) than reflashed factory rom with dc unlocker the phone rebooted normal but with the same problem that i have in the first.
Second try, flashed with cherry, entred 9008 mode,reflashed with zte tool (by error used a bad msm8936 file from lenovo)
And the phone stop working not detected and black screen
Third try, desassemled the phone, removed battery find test point after many risky test,the phone boot again in 9008 mode.
Reflashed with zte tool, enter red green blue fastboot, and decided to reflash all the factory with fastboot flashall méthode to unbrick an msm8916. Fastboot finish with many failed.
The phone rebooted but black screen and blinking led with continus (red,blue, green), not detected in pc, trayed with test point and nothing
I think it's fully dead now
Sorry for all this long text but just to share expérience
Thank you
And no it's not dead ðŸ˜, find the way to boot it again in 9008 mode with shorting two test point
Here we go for other test
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
xzanium said:
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
Click to expand...
Click to collapse
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
How To Get Oeminfo
makabress said:
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
Click to expand...
Click to collapse
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
hellowbd said:
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
Click to expand...
Click to collapse
Hi , i found the oeminfo searching in google. I will try to find it again
hello
i a have the same prolem but i cant find "the service rom" too, my phone is stuck in mode 9008 i tried to do the rom by myself but witouth any succes.... i read in a post that i cant try to put the "Huawei_Honor_Cherry_L04_V100R001C900B150_India_4.4.4_EMUI_3.0_05021SLQ" who has the same structure but cannot flash phone said "bootloaderimage" fail
please anyone can help me? i am 2 months witout phone... sorry about my bad english im a spanish guy
rio-l01 test point
hi, please i can't found rio-l01 test point can you help me
rmili25 said:
hi, please i can't found rio-l01 test point can you help me
Click to expand...
Click to collapse
test point are in the left/right side of the display connector, you can use a small wire to short it
JoseBankai said:
test point are in the left/right side of the display connector, you can use a small wire to short it
Click to expand...
Click to collapse
thank you brother
please i have the same problem ( rio-l01 no service no call ) can you help me please by oeminfo file or other things
excuse me i'am bad in english
still having the same problem, no solution, try to resoldering emmc, processor, voltage are ok, everything works in other board, so the problem is still the **** mode 9800 and the vanished "service rom" (not trully vanished but every service that i call to fix this ask me for a lot of money just to fix 1 phone... not worth it..) hope somebody can explain this at least, and why is happening, maybe one day can recovery my data on thtat phone....
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
sjmahmoudi said:
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
Click to expand...
Click to collapse
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply a RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
computerslayer said:
this problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your sku and whether or not there really is a hardware issue or not, it may be possible to apply a ruu, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your os version, which will help us determine your phone's sku.
Click to expand...
Click to collapse
os: 3.35.401.32
shivadow said:
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
Click to expand...
Click to collapse
I rooted this phone when I first bought it. but 4 months ago I unroot it so I could update it's android to marshmallow. after unrooting, i receive the android update and everything was as normal as a fresh unrooted phone.
I was able to go to download mode when first my phone faced this problem. but now the download mode is not available
it says: failed to boot to download mode
press volume up or down to back to menu
this build is for
development purposes only
do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
computerslayer said:
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply an RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
Click to expand...
Click to collapse
I took my m9 to HTC service center. he said that main chip must be replaced. after replacing the chip, he said that I need a dump.bin file and I do not have it. now after 3 months, my dear m9 is still on the service center . I search all over the net for the dump.bin file but there is nothing at all.
I do not even know what the hell is the dump.bin file. he said that your phone can boot but it will not have antenna without relevant dump file. I'm confused please help me
my phone model ID: 0PJA100
Did you give your phone to an official HTC service center? HTC should have the needed file so the fact that you should provide it to the service center confuses me a bit.
It's impossible to get that file (from a working phone) without a JTAG device and I doubt that many M9 owners have one since they're quite expensive. Sorry for the bad news.
Hi everyone, I've purchased a Redmi 7 outside my country (Argentina), and everything worked as expected. Then after some hours using it, the phone started updating. After the update completed my SIM card was not detected anymore and both IMEI numbers show up as UNKNOWN.
I've downloaded some tools to restore the IMEI but in order to do that I need to open Diag mode. The codes (*#*#717717#*#* and such) won't work, showing the message "Open diag failed". I've read that to enable Diag mode, the phone needs to be rooted.
To be rooted, the bootloader needs to be unlocked and to unlock the bootloader, I've to log in MI Account in the phone but is impossible without a valid IMEI.
I don't think I did something wrong since I just bought it and used it normally for a few hours with the SIM card working correctly.
I've already written an e-mail to the Xiaomi support contact but got no response yet.
What can I do? Is there a way to get into Diag mode without root?
Thanks in advance
You can try flashing a fastboot rom of your region through fastboot mode
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
I'm looking for a solution that would allow me to either unlock my phone without data loss, or make a backup of the phone's internal storage on an sd card/pc before hard resetting.
The device is not rooted and I don't have custom recovery installed. USB Debugging is on, but my laptop is not authorized.
With Adb, the device is detected but unauthorized. It seems to be detected normally in fastboot mode. I was able to get my laptop to detect it in recovery mode by clicking on "Connect with MIAssistant" while it was plugged in, but only in sideload mode. I also somehow managed to get into safe mode, but I used the stock screen lock, so unless there's something else that can be done in that mode, it doesn't seem useful in this situation.
I tried the actual MIAssistant software but it tells me to update my device before connecting. From what I found, this is because it doesn't even work with phones running Android 6.0 Marshmallow or above, so that seems to be a dead-end, unfortunately. Downloaded from here, updated to version 3.2.1.3111. If there's a newer version that could support my device, even an untranslated one, I would love to know, but I couldn't find a working one.
I had some ideas that could potentially solve my problem, but couldn't find a way to actually execute them, so here they are in case someone out there who knows more than me could help me with one of them.
1, Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
2, Is there a way to make a backup of the internal storage of my phone in fastboot/sideload mode?
3, Is there a way to get adb to detect this device normally in recovery mode, instead of in sideload mode?
4, Is there a way to get my device into mtp/ptp mode instead of charging mode when connected to a PC without USB Debugging so I can copy my files?
5, Here's a thread I found that seems promising, although it's old. Could I somehow use this, or a similar method on Redmi Note 8? The Recovery Mode is much more limiting on this device, unfortunately, so I can't exactly follow this tutorial. Are there alternatives that can be done in adb fastboot/sideload mode, perhaps?
6, If I am forced to hard reset, is there any software out there that could recover at least some of the deleted data afterwards, or is everything lost in case of a reset?
I am open to new ideas not listed above, as well. I am not a very advanced user so I probably missed some things.
Thank you so much for any answer in advance!
zoey_96 said:
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
Click to expand...
Click to collapse
do you have the default recovery ? or a custom one ?
zoey_96 said:
Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
Click to expand...
Click to collapse
No
loopypalm said:
do you have the default recovery ? or a custom one ?
Click to expand...
Click to collapse
Default, which doesn't have many options on Xiaomi. :/
loopypalm said:
No
Click to expand...
Click to collapse
Sad to hear that. Are there any alternative options that could solve my problem? I'd really rather not factory reset.
zoey_96 said:
Default, which doesn't have many options on Xiaomi. :/
Click to expand...
Click to collapse
if you had twrp or similar your problem would be solved ...
zoey_96 said:
Are there any alternative options that could solve my problem?
Click to expand...
Click to collapse
not as far as i know, ask in ADB thread if you find any
Updated with extra info in case anyone else has any ideas.
Even if you can copy your files to PC, they are problably unusable because of encryption.
That is why you need that pattern
For security this is exactly what you want, if your phone is lost or stolen.
Elinx said:
Even if you can copy your files to PC, they are problably unusable because of encryption.
That is why you need that pattern
For security this is exactly what you want, if your phone is lost or stolen.
Click to expand...
Click to collapse
Do you mean that the reason it doesn't accept the correct pattern anymore is for security? I would have thought it would still accept the correct one, at least after several tries of the same thing. Being completely locked out even when you know the correct password is a little strange to me.
zoey_96 said:
Hello!
I need help regarding a Redmi Note 8 that no longer accepts the correct pattern and is locked.
I'm looking for a solution that would allow me to either unlock my phone without data loss, or make a backup of the phone's internal storage on an sd card/pc before hard resetting.
The device is not rooted and I don't have custom recovery installed. USB Debugging is on, but my laptop is not authorized.
With Adb, the device is detected but unauthorized. It seems to be detected normally in fastboot mode. I was able to get my laptop to detect it in recovery mode by clicking on "Connect with MIAssistant" while it was plugged in, but only in sideload mode. I also somehow managed to get into safe mode, but I used the stock screen lock, so unless there's something else that can be done in that mode, it doesn't seem useful in this situation.
I tried the actual MIAssistant software but it tells me to update my device before connecting. From what I found, this is because it doesn't even work with phones running Android 6.0 Marshmallow or above, so that seems to be a dead-end, unfortunately. Downloaded from here, updated to version 3.2.1.3111. If there's a newer version that could support my device, even an untranslated one, I would love to know, but I couldn't find a working one.
I had some ideas that could potentially solve my problem, but couldn't find a way to actually execute them, so here they are in case someone out there who knows more than me could help me with one of them.
1, Is there any way I could authorize my laptop for USB Debugging without being able to accept the prompt on screen?
2, Is there a way to make a backup of the internal storage of my phone in fastboot/sideload mode?
3, Is there a way to get adb to detect this device normally in recovery mode, instead of in sideload mode?
4, Is there a way to get my device into mtp/ptp mode instead of charging mode when connected to a PC without USB Debugging so I can copy my files?
5, Here's a thread I found that seems promising, although it's old. Could I somehow use this, or a similar method on Redmi Note 8? The Recovery Mode is much more limiting on this device, unfortunately, so I can't exactly follow this tutorial. Are there alternatives that can be done in adb fastboot/sideload mode, perhaps?
6, If I am forced to hard reset, is there any software out there that could recover at least some of the deleted data afterwards, or is everything lost in case of a reset?
I am open to new ideas not listed above, as well. I am not a very advanced user so I probably missed some things.
Thank you so much for any answer in advance!
Click to expand...
Click to collapse
Howdy bro (I also have a Xiaomi Redmi Note 8).
I've been almost two intense weeks reading and watching the XDA forum, trying somehow and I did not find the way to unlock it .... Besides that I have the Bootloader disabled it makes me more difficult, because for that I need to format my phone and is what I do not want .... Already today is my last day of searching and I think I will have to leave my memories behind and Format my cell phone.
I leave you a thread of a user that explains well the process of why you can not:
A Comprehensive Guide to getting Past the Android Pattern Lock Screen
So, here's the situation I’m in. Also I am 99% sure I got something wrong so please tell me. I’m past the pattern lock screen so ADB won’t directly work to unlock the lock screen. If I was at a pattern lock screen, I could use ADB to unlock the...
forum.xda-developers.com
and several more of the many threads that I searched, maybe it will help someone:
[Xiaomi] How to unlock phone after forgetting the password.
Hello, today it happened that I forgot a password to my phone. I've tried to restore it by logging in into my xiaomi account and my google account. Unfortunately it only offers to wipe my data, which I want to avoid at all costs. I have Poco F2...
forum.xda-developers.com
[Android][Guide]Hacking And Bypassing Android Password/Pattern/Face/PI
- DISCLAIMER - This Is For Educational Purposes Only You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices Files And Tutorials Are...
forum.xda-developers.com
[Android][Guide]Hacking And Bypassing Android Password/Pattern/Face/PI
- DISCLAIMER - This Is For Educational Purposes Only You Shall Not Use This On Other People Phones Without Permission Under Any Circumstances I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices Files And Tutorials Are...
forum.xda-developers.com
[GUIDE] Unlock bootloader without losing user data.
Hi, I am writing this guide because many people followed other guides in the forum and lost their data. This is the proper way of unlocking the bootloader without losing your data. 0 - Read the whole guide before proceeding and proceed at your...
forum.xda-developers.com
[GUIDE] Redmi K20 Pro - Unlock & Root Information, Links, Tools and Instructions
Like many, I was overwhelmed with information when trying to unlock, flash, and root my phone. After many failures, I decided to compile the good information all in one place. I hope this helps. If it does, please consider buying me a beer...
forum.xda-developers.com
Recovery without data loss
Hi Community, you are my last salvation. I am owner of Pixel 4a 5g since half a year and now it cannot boot anymore. I see only the google-"G" and the loading bar nothing else. I can start the Boatloader but before i do a factory reset i need to...
forum.xda-developers.com