After installing 10.3.4 PFLMIXM global stable, usb thumbdrive not recognized - Xiaomi Redmi 7 Questions & Answers

Does anyone have this problem? I used a USB stick on previous versions with no problem, but now after this new update the USB drive is not detected at all.

miwashi said:
Does anyone have this problem? I used a USB stick on previous versions with no problem, but now after this new update the USB drive is not detected at all.
Click to expand...
Click to collapse
Now there's an option to enable or disable the USB OTG function, you can find it in the settings. Try that.

It worked! Thank you.

Related

USB Ports not working.

Hello to all
I have a huifei 4.4.4 system and both the rear USB ports have stopped working. 5V on the ports is working OK. SD cards are working fine. Wifi and bluetooth is working fine. I tried to update mcu with newer version but no luck. I have been playing around with different music players and car service app. System was rooted at the time they stopped working. I have also tried factory reset but still not working. Not sure if I upset something while playing around. Hoping someone out there can help me re enable the ports. Thanks in advance for any help.
I'm experiencing an issue like that: Whenever I'm listening to mp3 files via USB it stops playing after some time. At that point I am not able to browse the USB stick - it simply stuck. Only a device restart helps at that point.
But playing mp3 via sd card works fine!
Thats what I'm doing. SD card works fine for me. My usb's are completely dead. Nothing is detected when I plug in.
Sent from my SM-G900I using Tapatalk
Mine front one too (back ones I didnt tested yet).
Is there many of us with USB problems? Any fix? I was searching HW thread but didn't found much there.
There is just some hint on enabling "adb debugging" ("adbon" password in Factory Settings or option in Debugging Options on rooted ROMs) but that didn't worked for me.
Mine isn't completely broken. It only stucks at some point - after booting, both back USB ports are working fine...
I've tried that. Still not working. You think if i use different rom it might reset something snd get it working again? You running standard rom or have you updated?
Sent from my SM-G900I using Tapatalk
It standard rooted... But as I mentioned: its not fully working on my unit, too.
I had a problem where the WiFi would shutoff and couldn't be turned on until a reset. Ended up being the USB power due to a bug in the MCU software. If you haven't already tried the MCU update, it might be worth a shot.
I had that too where i couldn't turn the wifi on. For some reason the wifi is working again. I checked 5v supply on usb port. Supply seems ok.
Sent from my SM-G900I using Tapatalk
None USB ports working in my Android HU.. they just charge but don't read
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
---------- Post added at 08:48 PM ---------- Previous post was at 08:40 PM ----------
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-detail/Hot-selling-android-system-octa-core_62185754927.html?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
Majelogo said:
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
---------- Post added at 08:48 PM ---------- Previous post was at 08:40 PM ----------
Hello friends!
I bought an Android Head Unit MIB4 (SC9853I) for my VW Golf 7:
https://www.alibaba.com/product-det...l?spm=a2700.7724838.2017115.25.71201862OEMWlE
Everything works fine but I'm having problems with the USB ports.. the 3 usb ports charge my phone but they don't read any usb drive with music. I don't know if this is a hardware or software problem.. I've tried formatting several usb drives (4gb , 1gb, 64gb) in fat32 but none of them are read by any usb port of the headunit.
Please, help me! and thanks in advance..
Click to expand...
Click to collapse
I Am alose facing same issue.... tried 8 GB flash drive in FAT32 and NTFS and ExFAt.. none of them working... Any idea ?
Same here, I had a problem with android auto, the Dasaita vendor sent me this message:
Here the latest link with system and updatesX6 android 10 (1113) https://drive.google.com/file/d/1rO-wBK8rvVZsXT_5IjN3MyuMY00utZZX/view?usp=sharing Please download, then ONLY put the update.zip file to the USB (format the USB firstly). Finally, click the setting > system > system updates to update it. Here the latest link with MCU and updates 3.67 MCU https://drive.google.com/file/d/1VHmt2nffbQdc2iHiy_Pl3rNwLXN4cVea/view?usp=sharing Please download then ONLY put IMG file to the USB (format the USB firstly). Finally, click the setting > system > MCU update to update it. Hope the update can help you fix the issue. How to update the system:
(If you can't download the file, please change the Explorer or computer to do it. If it ask you for the Credit card id, just create the sendspace account then you can download it, No need to write your Credit card id information! )
After updating everything, my external USB ports don't work anymore.
Any clues on how to fix it?
magoanubi said:
Same here, I had a problem with android auto, the Dasaita vendor sent me this message:
Here the latest link with system and updatesX6 android 10 (1113) https://drive.google.com/file/d/1rO-wBK8rvVZsXT_5IjN3MyuMY00utZZX/view?usp=sharing Please download, then ONLY put the update.zip file to the USB (format the USB firstly). Finally, click the setting > system > system updates to update it. Here the latest link with MCU and updates 3.67 MCU https://drive.google.com/file/d/1VHmt2nffbQdc2iHiy_Pl3rNwLXN4cVea/view?usp=sharing Please download then ONLY put IMG file to the USB (format the USB firstly). Finally, click the setting > system > MCU update to update it. Hope the update can help you fix the issue. How to update the system:
(If you can't download the file, please change the Explorer or computer to do it. If it ask you for the Credit card id, just create the sendspace account then you can download it, No need to write your Credit card id information! )
After updating everything, my external USB ports don't work anymore.
Any clues on how to fix it?
Click to expand...
Click to collapse
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Cbenton82 said:
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Click to expand...
Click to collapse
Perhaps posting in correct forum might yeild responses. The last few posts none of the units are MTCB.
Cbenton82 said:
My USB ports only charge on my Px6 and no updates seem to fix it. I don’t have usb debugging options either. Not sure what to do to fix. Any suggestions?
Click to expand...
Click to collapse
I have same problem. Did you find a solution?
famepa said:
I have same problem. Did you find a solution?
Click to expand...
Click to collapse
Far out. Posting in wrong forum.

Help! USB device not recognized

Since marshwallow update i can't connect with my lg g4 to windows pc. It's not the usb cable, or my pc, i've tryed with another phone and it works just fine. Any sugestion or should i return my phone to waranty?:crying:
AndreiMel said:
Since marshwallow update i can't connect with my lg g4 to windows pc. It's not the usb cable, or my pc, i've tryed with another phone and it works just fine. Any sugestion or should i return my phone to waranty?:crying:
Click to expand...
Click to collapse
Hello,
Since update on windows 10 and MM i've got some trouble too. You have to install lg usb driver from the lg phone and tell windows to stop auto install mtp drivers. Windows is always trying to install an old driver over the lg one and that's the problem.
You can also try to switch from regular usb to usb debigging in dev options several times.
nope, it still doesn't work. when i plug my old samsung galaxy s2 it just works like a charm. also i reinstaled usb driver with no fix. i'm not sure if it's hardware fault or software fault
AndreiMel said:
nope, it still doesn't work. when i plug my old samsung galaxy s2 it just works like a charm. also i reinstaled usb driver with no fix. i'm not sure if it's hardware fault or software fault
Click to expand...
Click to collapse
Does it charge at least ?
Zenouzenou said:
Does it charge at least ?
Click to expand...
Click to collapse
yes, the phone is charging
AndreiMel said:
yes, the phone is charging
Click to expand...
Click to collapse
Mine was the same. And when you swipe down notification for usb connexion cant you choose mtp ?
Try to uninstall the samsung USB driver or the drive which is affected yo your g4.
Zenouzenou said:
Mine was the same. And when you swipe down notification for usb connexion cant you choose mtp ?
Try to uninstall the samsung USB driver or the drive which is affected yo your g4.
Click to expand...
Click to collapse
it doesn't appear option to select MTP . also i've tryied to connect a usb flash disk and it doesn't read it via OTG cable. I think it's a hardware fault
AndreiMel said:
it doesn't appear option to select MTP . also i've tryied to connect a usb flash disk and it doesn't read it via OTG cable. I think it's a hardware fault
Click to expand...
Click to collapse
Looks like I have the same problem. Started off with Android Auto not detecting it, but it looks like the PC can't either, nor does it pick up an external USB DAC via the OTG cable :/
Did you have any success at all? Sounds like a hardware failure though :/
Sorry I just realised this thread was back in 2016 not 2017!
have same problem here, windows 10 x64, will try in other pc and see what happens.

T705 upgraded to mm and now otg dead and keyboard always resets?

After upgrade to marshmallow the usb otg feature no longer works. I have tried debugging and choosing ptp, mtp, charging, all to no avail. It simply no longer recognizing anything other than the power cord plugged in. I've tried the built in file manager and es file. Can I fix this?
Also I have a thumb keyboard installed and working. But on reboot the keyboard resets to Samsung default every time??
Thanks in advance. I am now searching downgrade options...the otg feature is a killer for me.
webnetxpress said:
After upgrade to marshmallow the usb otg feature no longer works. I have tried debugging and choosing ptp, mtp, charging, all to no avail. It simply no longer recognizing anything other than the power cord plugged in. I've tried the built in file manager and es file. Can I fix this?
Also I have a thumb keyboard installed and working. But on reboot the keyboard resets to Samsung default every time??
Thanks in advance. I am now searching downgrade options...the otg feature is a killer for me.
Click to expand...
Click to collapse
i had no problem using otg. try to factory reset. usually with every big update some old files that left from previous version will give problems to device. and for the thumb keyboard try to look at the application permission. the app kind of being abandon. last update on 2014. so it might have problem with MM.
Check your device drivers are working correctly.
ashyx said:
Check your device drivers are working correctly.
Click to expand...
Click to collapse
How do you check device drivers on an android tablet? And which drivers control the otg function?

Usb drive/otg cable not detecting need help

Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
cinmil said:
Hello,my tab sm t705 not detecting usb otg cable,and usb drive when connecting to pc,its only showing charging but no prompt for mtp like it usually did,how to solved?
this happen after my otg drive often auto connect/disconnect a few times, thinking the cable broken,already buy a new one but still not detect.
My usb debugging is already tick,mtp+adb is already tick.
Tried factory reset but still not detect.
Already try googling but no result
Is this software or hardware problem?
BTw im using iron man rom & kernel.
Click to expand...
Click to collapse
Check your win drivers in device manager. Ensure the Mtp driver is active.
Already check.not pc problem.and already installed samsung usb driver
cinmil said:
Already check.not pc problem.and already installed samsung usb driver
Click to expand...
Click to collapse
Fair do's but does it detect the device in device manager as an MTP device when connected?
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
cinmil said:
Nothing detected on my pc except for mouse usb.no connection sound,nothing happen when the usb plug in,except my phone showing charging
Click to expand...
Click to collapse
Have you tried just a normal USB cable to see if mtp works?
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
cinmil said:
What u mean by that ?sorry a little noob about this.
But i have try connecting other phone.and its work perfectly fine.its detect as portable media..dont know what the problem with my tab.also i have try ant+ tester app.and its showing ant support built in firmware no service?is it normal?can anyone who have t705 try it?
Click to expand...
Click to collapse
For MTP you just need a normal USB cable not OTG.
This is result when using ant tester
ashyx said:
For MTP you just need a normal USB cable not OTG.
Click to expand...
Click to collapse
Ok understand wht u mean now,already done doing that.that wht i want to tell,showing nothing detect on my laptop eventough usb cable is already plug in.already check on device manager>root hub properties.and check what usb is connecting and only show the mouse usb.phone cable not detect on any usb root hub.
Solved
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
cinmil said:
After a few days thinking of solution then i try to go download mode and plug the usb cable to pc and voila.usb updte installer pop up means its detecting now.and i cncel the updte and go to normal mode and its also detecting.mayb some software failure that its happen.btw i just uninstalled and installed new driver and let it updte after it detect the usb.problem solved.nearly changing new micro usb port?
Click to expand...
Click to collapse
Bro can you explain how did you solve the issue
sai143420 said:
Bro can you explain how did you solve the issue
Click to expand...
Click to collapse
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
What do you mean by download mode
---------- Post added at 03:18 AM ---------- Previous post was at 03:18 AM ----------
cinmil said:
Sorry bro.this post been too long.but from i remmember i donwload some app for pc.and enter my phone to download mode.maybe the app is official for samsung download mode.
Click to expand...
Click to collapse
What's that app name

USB Connect/ OTG disable

Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
ETNYBzh said:
Hello,
I've got a SM-T813 and I ve got a problem with my usb port. I can neither connect to my PC or my usb-Rj45 since i installed TWRP and LineageOs.
I cannot select what to do when usb connection is detected.
I don't kown what's wrong. I changed the cable, re-install TWRP but i does not work.
Odin is not detected to.
Someone to help me please?
Thank you
Click to expand...
Click to collapse
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
HANSB57 said:
Your problem seems simular to what I had.
If you are sure the software settings are ok and that doesnt work, remove the backcover remove the battery connector, put it back again and see if that works. Does charging work?
Click to expand...
Click to collapse
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Techguy777 said:
Thats weird my s2 tablet has USb problems to. It stopped reading OTG usb connections and the PC. However it is always able to charge. I have noticed that when it does finally read on the PC it seems like the drives dont switch right and my battery wont charge. It got to the point I dont even try to plug it into a pc or USB otg just incase it quits charging I have SD card and twrp for installs so I use that instead. Most be a problem with the usb port and drivers.
Click to expand...
Click to collapse
I dont know the answer nor the solution.
What I noticed however is that I used my tablet as an monitor for an USB web cam.
The problem (charging but not being able to connect to PC) started AFTER I removed the webcam.
The app I use (USB Camera Pro) has an option "remove camera safely"
If I use that option everything works fine but if I remove the cam cable without pressing this option I cant connect to my PC anymore and have to unplug the battery.
I am having a similar issue and would be grateful for help. My Tab T815 has a clean install of the latest Android 10 Rom and Pico Gapps via TWRP 3.4. All seem to be working great apart from the USB OTG. Specifically, I am trying to connect my DJI Mini drone controller and it's not registering it plugged in. I also have Android 10 on a galaxy S5 and have no issues at all when I connect the DJI controller to the phone. I have run a diagnostic app that says OTG is compatible with the T815 so am now at a loss on what to try next. Could this be an issue with the Rom?

Categories

Resources