hi every one
yesterday i flashed the stock rom (4 files )
the main problem is that when it flashes the system.img it will not continue installing it (stuck from the beginning )
and i could not install the stock rom i got this
:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> dqmdbg.img
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5284 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> cm.bin
<ID:0/007> keystorage.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
could you please help me
ahmadsiddeeq0 said:
hi every one
yesterday i flashed the stock rom (4 files )
the main problem is that when it flashes the system.img it will not continue installing it (stuck from the beginning )
and i could not install the stock rom i got this
:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> dqmdbg.img
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5284 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> cm.bin
<ID:0/007> keystorage.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
could you please help me
Click to expand...
Click to collapse
system.img is an enormous file and can take several minutes for it to complete. The Odin flash via four file method is the correct way to install new OS's on devices past the S7, so youre good there.
Try it again, if the problem persists, try a new cable or a fresh download of the 4 files or different USB port, newer version of Odin, different computer.
But that last file will take FOREVAAAAAR LoL
Related
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
When you do that you have to pull the battery and go into recovery and wipe factory data reset. And then you should be fine. And I think you are in the wrong section for this sir.
Sent from my SGH-T889 using xda premium
---------- Post added at 04:47 PM ---------- Previous post was at 04:46 PM ----------
Of course after odin is finished.
Sent from my SGH-T889 using xda premium
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Can you get in to revovery? if so do full wipe and se if it helps. Have you tryed to flash CWM recovery through Odin? http://forum.xda-developers.com/showthread.php?t=2028103
And if you have one, have you tryed to recover an old CMW backup. You could also try to find a Odin Rom that is split into 3 files and a pit file, and do pit format. They should be out there. Hope you get your Note back up running.
Dude can you go into download mode? If you can the phone is recoverable if not, say goodbye and send to samsung, just say you have no idea what happen
---------- Post added at 10:15 PM ---------- Previous post was at 10:12 PM ----------
You probably flashing the oficial samsung fw, dont worrie the phone is not bricked dude, just enter in download mode power, then fast hit home + volume down if you can get in download mode menu the phone is ok
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Log: (second time(correct one))
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
4.1.2 -> 4.1.1?
mannok said:
After that, my phone bricked:crying:
I have flash it again correctly after the fault, but it still stuck in the SAMSUNG logo...
What can I do to safe the phone now:crying:
help!!!
The one I have flashed is N7105ZHALJ4_N7105ZZHALJ4_N7105ZHALJ4_HOME.tar.md5
Aah! downgrading from 4.1.2 to 4.1.1 . You need to wipe else will get stuck in samsung screen. Just go into the recovery mode (keep vol-up,home and power button till you reach the samsung screen,then release power button but keep other 2 button pressed till you reach recovery.Then wipe/reset. Reboot and you should be good to go.
Click to expand...
Click to collapse
Ok,
So I am trying to fix my dads phone which stopped working over the weekend and am at a total loss. The phone will ONLY boot into odin download mode. You can turn it on normally, can't get into recovery mode. I have already tried to flash the lastest stock TAR via odin and it installs fine, except nothing changes, still no recovery or boot.
OS I installed: G920PVPS4DQE2_G920PSPT4DQE2_G920PVPS4DQE2_HOME.tar.md5
ODIN Report
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Duplicate Post
Hello Everyone,
I have a Samsung Galaxy s4 mini GT-i9195 set, and it bricked, stuck in bootloop. so i do some search in google, and found a possible solution in this forum (https://forum.xda-developers.com/sho....php?t=2751224). while following those step, i failed at some point, here is the log.
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> sbl2.mbn
<ID:0/007> sbl3.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can anyone help me out?
Thanks in advance
i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
bigcheese223 said:
i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
Click to expand...
Click to collapse
Try patched ODIN
Did you ever find a solution? I have the same problem!
I accidentally erased everything when I tried to recover with twrp on my new phone so now it has no OS. I've tried a few ROMs (I think?). I'm not quite sure which to use , I think it was UK originally though because it had uk english as standard language on startup when it was still working. But the real issue I guess is the binary, what I understand it should be binary 13 and my ROM is 2, but binary 13 doesn't seem to exist? It says "Custom binary" in downloading screen.
Please help me, I'm really pulling my hair on this one..
It gets stuck here and then the error message appears in phone
Spoiler: Odin log
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> dqmdbg.img
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4925 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> up_param.bin
<ID:0/004> cm.bin
<ID:0/004> keystorage.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img