i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
bigcheese223 said:
i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
Click to expand...
Click to collapse
Try patched ODIN
Did you ever find a solution? I have the same problem!
Related
I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !
chuotanhtuan said:
I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !
Click to expand...
Click to collapse
can you give more details on what you are doing? Like the ROM your using, does your T999 end in a L or V? Are you coming from a 4.3 OTA or Kies update?
More info might be able to get you more help.
hello every one,
when i'm trying to install "openrecovery-twrp-2.7.0.0-t03gub.img.tar" in odinMod with odin 3, getting this Error:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
Please Help
[I'm on 4.3 JellyKat3 with PhiliZ 6, and I tried different Ports]
Bugaboo91 said:
hello every one,
when i'm trying to install "openrecovery-twrp-2.7.0.0-t03gub.img.tar" in odinMod with odin 3, getting this Error:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
Please Help
[I'm on 4.3 JellyKat3 with PhiliZ 6, and I tried different Ports]
Click to expand...
Click to collapse
This is not an error, you've completed flshing TWRP. So what's the prob? You can also check it out, first switch off your phone, then at start Press and hold vol up + menu key and then power key then it'd boot into 'TWRP' recovery mode.
Where's the Error ? ?
Sent from my GT-P5210 powered by AmatROM HD
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> BcmBoot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me on this? My phone was upgrading from 5.1.1 to 6.0.1 and then it died, so I turned it back on to download mode, and used a stock image of 5.1.1, and no luck. I tried 6.0.1, and still no luck.
Odin logs: (same thing with both)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, this is my personal phone I use daily. If you can help me with 4.4.4, that would be good too. :good:
I also unticked the bootloader option.
I accidentally erased everything when I tried to recover with twrp on my new phone so now it has no OS. I've tried a few ROMs (I think?). I'm not quite sure which to use , I think it was UK originally though because it had uk english as standard language on startup when it was still working. But the real issue I guess is the binary, what I understand it should be binary 13 and my ROM is 2, but binary 13 doesn't seem to exist? It says "Custom binary" in downloading screen.
Please help me, I'm really pulling my hair on this one..
It gets stuck here and then the error message appears in phone
Spoiler: Odin log
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> dqmdbg.img
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4925 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> up_param.bin
<ID:0/004> cm.bin
<ID:0/004> keystorage.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img