Can someone help me on this? My phone was upgrading from 5.1.1 to 6.0.1 and then it died, so I turned it back on to download mode, and used a stock image of 5.1.1, and no luck. I tried 6.0.1, and still no luck.
Odin logs: (same thing with both)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, this is my personal phone I use daily. If you can help me with 4.4.4, that would be good too. :good:
I also unticked the bootloader option.
Related
When I try to flash CWM or TWRP Odin says PASS but my tablet just reboots and no recovery is installed. I have installed Kies on my PC and successfully used CF-Auto-Root but recovery just won't install.
If it helps, this is the message from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Anyone knows what I'm doing wrong? Total noob here :silly:
What is the device
Sorry for my ignorance, but can you tell me what is your device actually? I'm bit confused about "N1150."
I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !
chuotanhtuan said:
I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !
Click to expand...
Click to collapse
can you give more details on what you are doing? Like the ROM your using, does your T999 end in a L or V? Are you coming from a 4.3 OTA or Kies update?
More info might be able to get you more help.
hii all
i tried to downgrade my bootloader for my Tab pro 8.4 wifi only with the one in the root with towlroot thread and odin give me this log :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
which i think it's ok ... but after i go to setting -> about -> the kernel version is still : T320UEU1ANK1
SO ANY THING WRONG ????
Your kernel and bootloader are two completely different things. If you're downgrading the bootloader, why do you think that your kernel version would change?
I flashed the wrong recovery in flashify. But I think it's in a soft brick state. When I reflash to a previous recovery, this is what I get:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to flash twrp 3.0 zerofltespr and I think it was the wrong file for the wrong device. But the error in Odin Mode I get is "unsupport dev_type". When I plug the phone into the computer, it will autoplay the internal storage and SD card.
any ideas?
Sakui
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> BcmBoot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)