Develop Bugs

N1150 Fails to flash (any) recovery using Odin

When I try to flash CWM or TWRP Odin says PASS but my tablet just reboots and no recovery is installed. I have installed Kies on my PC and successfully used CF-Auto-Root but recovery just won't install.
If it helps, this is the message from Odin:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Anyone knows what I'm doing wrong? Total noob here :silly:

What is the device
Sorry for my ignorance, but can you tell me what is your device actually? I'm bit confused about "N1150."

help me, i need pit files for S3 t999,plz

I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !

chuotanhtuan said:
I always get an error like this:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> amss
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And on the device screen when in download mode, I see in red, "unsupport dev_type".
now i need pit files for t999, plz help me, thankyou !
Click to expand...
Click to collapse
can you give more details on what you are doing? Like the ROM your using, does your T999 end in a L or V? Are you coming from a 4.3 OTA or Kies update?
More info might be able to get you more help.

[Q] odin doing nothing

hii all
i tried to downgrade my bootloader for my Tab pro 8.4 wifi only with the one in the root with towlroot thread and odin give me this log :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
which i think it's ok ... but after i go to setting -> about -> the kernel version is still : T320UEU1ANK1
SO ANY THING WRONG ????

Your kernel and bootloader are two completely different things. If you're downgrading the bootloader, why do you think that your kernel version would change?

Secure Check Fail : system on my N910A (Note 4 AT&T)

Can someone help me on this? My phone was upgrading from 5.1.1 to 6.0.1 and then it died, so I turned it back on to download mode, and used a stock image of 5.1.1, and no luck. I tried 6.0.1, and still no luck.
Odin logs: (same thing with both)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, this is my personal phone I use daily. If you can help me with 4.4.4, that would be good too. :good:
I also unticked the bootloader option.

stuck on factory binary s9 960w

i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)

bigcheese223 said:
i have a s9 phone thats xac 960w and whenever i try installing any firmware i get this failed (auth) code. it says frp off now after i did the combination, i cannot seem to install any sort of firmware onto it, please help
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 7987 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
Click to expand...
Click to collapse
Try patched ODIN

Did you ever find a solution? I have the same problem!