Develop Bugs

DBA "Just Like Glass®" Screen Protector - ZAGG Killer?

DBA is a lesser-known company specializing in phone cases and screen protectors. One of their newer products, the "Just Like Glass®" screen protector promises to be the best screen protector you'll ever have.
Here's what Scott of DBA has to say about the screen protector:
We also had an independent third party test directly against ZAGG and destroyed them.
Testing with Laser Beams for distortion, regular glass of course had 0, Just Like Glass had 11.50, and Zagg had 666.
ZAGG doesn't even claim to increase the break resistance of the glass while ours has tested for an increase of near 40%.
In a wear test equivalent to putting it in and out of your pocket ZAGG showed wear after 345 times and our showed no wear even after 10,000.
ZAGG is more scratch resistant but at the cost of creating the distortion. And the difference isn't that great.
Just like glass screen protectors are stain proof. You can get makeup on the, dirt, oil, dye, etc... and you can wipe it off. ZAGG you can't. I personally tested ours with a black sharpie (not really the best decision looking back on it) and it did come off with a little elbow grease.
As far as being smoother than glass, if you use glass as the baseline Just Like Glass is 20% smoother while ZAGG was -147%. You can really feel it.
Ours don't have the orange peel effect that ZAGG does.
I wouldn't be doing this at all if I didn't have something that I would use and that was better than everything else.
Click to expand...
Click to collapse
It's a wet-application (like ZAGG), but the included application kit makes it easy. This protector covers the viewing area, allowing it to work with cases perfectly.
It looks very promising and costs only $13.50 (by comparison, the ZAGG protector is $14.99).
Here's the site: DBA "Just Like Glass®"

I had a heck of a time getting it out of the plastic and in the process it got dimples from trying to pull it out. I contacted them to see if they will get a replacement sent out what a bad experience because they decided to make the plastic bag it comes in too damn tight with no leeway at all. The other con I noticed is it says to use a hard card but it does not come with one so I used the squeeze I have from Skinomi that I used on the Transformer Prime tablet.
Now I do have to admit it does feel like glass and not the soft rubbery feel I am use to with my mothers Skinomi. I always hate how the Skinomi drags on the tablet but this no drag at all. I will let you know how customer support is like after contacting them for a replacement for this one that got dimpled getting it out of the too tight plastic bag. Next time I will use a knife to cut the bag instead of trying to pull it out.
Oh and one more thing no sensitivity decrease at all that I can tell. I will try to get some pictures of it with my mothers camera to post but just to let you know it just a few mm larger than the screen so only covers the screen so great for cases.
I also tested the permanent marker on a piece of the excess plastic that I pulled it from and the marker after drying wiped right off so definitely appears to hold up to the claim of stain proof.

I guarantee you they will have issues calling it glass. You guys have no idea how dumb people are when it comes to these things.

Now I'm curious.

How was the fit on the screen? Full to the edge coverage? Custom cutouts or just a chunk cut out?

I'm interested in this. Anyone else who bought willing to share?

Ok here is the pictures I promised. BTW I was not able to attach the pictures here got a security token was missing error.. any idea why? I was only able to attach picture by uploading from a picture site like Photobucket. Anyways I think I did a pretty good job of these pictures and you will see the 3 blemishes/dimples I caused pulling the protector out of the plastic but it came out better than I thought it would for only my second wet application install.
The fit is just about 1-2 mm larger than the screen so it only covers the screen and really works well with my case. The case is quite narrow for one with a kickstand and been very happy with the $10 purchase for it.

pmoradi2002 said:
I guarantee you they will have issues calling it glass. You guys have no idea how dumb people are when it comes to these things.
Click to expand...
Click to collapse
Everyone in every retail setting will tell you customers are dumb. Letting those customers know on a forum is a bad thing for your business.

From the DBA website, it appears that this is a fairly new company; a start-up by one individual. Do we have any independent evaluation of his claims regarding his screen protector and cases?

So this only covers the screen area and not the full frontal glass?

kuratsu said:
So this only covers the screen area and not the full frontal glass?
Click to expand...
Click to collapse
Yes just like the pictures show. You can see the edges on the top down view of the phone. It's the area I was worried about and it is not rubbery or tacky like on my mothers Skinomi.

Century21J said:
:good:
I'm guessing that's what the other guy did for spectre?
this looks promising. the thing i hate about wet application is the tacky feel to it. but if this promises to be "just like glass", might be worth trying it out.
Click to expand...
Click to collapse
Yeah it's not a bad price and definitely not rubbery/tacky at all. BTW if you have any other questions on it let me know I'll answer to the best of my knowledge this was my first actual review so hope I covered all the bases in what was important to know Hope it was useful to you all.

Just Like Glass Screen Protectors
Hey all,
I'm not really new but I tend to post on other forums. I come here for the good stuff on rooting.
I'm the CEO of DBA Cases, Inc.
I did start the company, however I had several investors. After having an Original Droid, a Bionic, and a Galaxy Nexus I had a very good idea of what people liked.
Personally I hated screen protectors and was not going to sell one until we came up with this. I have it on my phone and love it. It protects against breaks as well - my photographer asked me why I went into making cases so I took the phone out of the case and it squirted out of my hand - hit the wall and then our tile floor. No damage at all to the phone but a very small micro scratch on the Just Like Glass Protector. It probably would have shattered. I've found that the most you can do is give it micro scratches - you can't feel them or see them with the screen on. That's what I got from the fall and it doesn't bother me at all.
I'd be happy to answer any questions you may have.
Scott

molitar said:
Nice idea but I can not buy any case without a kickstand I watch alot of videos on mine.
Click to expand...
Click to collapse
I completely understand. I wanted to put a kickstand on the Ultra but it would have been too bulky. Also the cost of adding a kickstand is nearly the same amount as making the mold for the case.
I have a different solution I use.
I'm planning on making my own stand but I have them wherever I may need it.
---------- Post added at 10:39 PM ---------- Previous post was at 10:30 PM ----------
While I'm taking pictures...
The Ultra and the Thin Grip
Please ignore the mess behind them.

The case does not look that much skinnier than the Amaze I am using which does have a kickstand.

Promising
Looks pretty cool. How does it keep your screen safe? doest it last well?

SSHGuru said:
How can you tell how thin the cases are from my picture
Stands must be made out of polycarbonate or abs in order to hold the case up. That means some bulk. It doesn't have to be a ton but I looked into a ton of stands and didn't decide to do it.
I wanted to - in fact I was going to make a stand of the same material they use in snap watches would would be made of TPU. Press a button and the stand comes out and can bend.
Problem is that it increases the cost of the case by at least $10,000. In fact I was talking to the CEO of another case company last week and he said it took three molds to make his stand. That's a ton of money.
Since I had a budget I decided to do without - some day.
Both of my cases could not be any thinner than they are.
Click to expand...
Click to collapse
I was looking at the depth where the camera lens is. Yes it is a thinner but I was just commenting not that much thinner considering that the Amaze is a bit thicker with the kickstand. I really am impressed how thin the Amaze is with a kickstand as most are bulky considerably with a kickstand. The sides look the same almost in width as yours but the back is probably about twice as thick as yours due to the kickstand. It may not be a very strong kickstand but strong enough for regular use as long as don't drop it with it out as it has the really skinny piece of support plastic that holds it open the other part of the kickstand is quite thick. The stand itself is about 2mm thick and the plastic support is only I would say about 1mm thick.
Now the screwdriver portion was not that impressive as there is no way to tell how much force is being used each time. But the screwdriver and rotary was quite impressive as there was no getting around how hard the screen was being hit by that key. The only thing I notice is the oil from my hands tends to smudge the screen more than the glass but for the protection I can live with that but would be nice if they found a way to eliminate some of the smudges with it. Other than that really happy with the screen and registering on the site for the replacement so I can get this one replaced without the 4 dimple spots. BTW a video installing it would be a good idea I used the shower method in bathroom for dust and lint.

molitar said:
I was looking at the depth where the camera lens is. Yes it is a thinner but I was just commenting not that much thinner considering that the Amaze is a bit thicker with the kickstand. I really am impressed how thin the Amaze is with a kickstand as most are bulky considerably with a kickstand. The sides look the same almost in width as yours but the back is probably about twice as thick as yours due to the kickstand. It may not be a very strong kickstand but strong enough for regular use as long as don't drop it with it out as it has the really skinny piece of support plastic that holds it open the other part of the kickstand is quite thick. The stand itself is about 2mm thick and the plastic support is only I would say about 1mm thick.
Now the screwdriver portion was not that impressive as there is no way to tell how much force is being used each time. But the screwdriver and rotary was quite impressive as there was no getting around how hard the screen was being hit by that key. The only thing I notice is the oil from my hands tends to smudge the screen more than the glass but for the protection I can live with that but would be nice if they found a way to eliminate some of the smudges with it. Other than that really happy with the screen and registering on the site for the replacement so I can get this one replaced without the 4 dimple spots. BTW a video installing it would be a good idea I used the shower method in bathroom for dust and lint.
Click to expand...
Click to collapse
We are going to do a video soon for installing but the instructions on the site are the newest versions. Doing it in the shower is the safest method but if I suggest it people probably will freak out about how hard it is when it's really pretty easy.
In the video that was a glass puncher. I know it's hard to tell how hard it's being pushed but it's the same force. One is done on the film which stops the force and one on the glass which does not. The key test was pretty intense and then taking the rotary to it was cool. (if people are wondering it's on the Facebook page).
Samsung with the Galaxy Nexus and the S3 have made great glass that doesn't pick up prints. The one irritation about the protector I have is that it does. Not terribly but I'm used to not worrying about it. We are working on a way to get rid of the micro scratches and the fingerprints. The problem is if we add a layer it makes it feel more plastic and ruins the visibility. It has to be a chemistry solution and I didn't take chemistry in college so I just ask them to try...

https://www.facebook.com/photo.php?v=10151389828738942

I wonder how these screen protectors compare to the ZAGG EXTREME

After 2 Years with Iphone .....

Hello,
after more than 2 Years with the IPhone 4 I'll become next week the HTC One Black Vodafone Germany.
Please be so kindly and give me some urgent handling recommendations...do I need a display protection, any cases or whatever....?
Many thanks.....

speedmaster.nl said:
Hello,
after more than 2 Years with the IPhone 4 I'll become next week the HTC One Black Vodafone Germany.
Please be so kindly and give me some urgent handling recommendations...do I need a display protection, any cases or whatever....?
Many thanks.....
Click to expand...
Click to collapse
It depends on how careful you are with your phone, but I would definitely recommend a case and screen protector to avoid getting scratches, if nothing else.

tyler.durden said:
It depends on how careful you are with your phone, but I would definitely recommend a case and screen protector to avoid getting scratches, if nothing else.
Click to expand...
Click to collapse
I'm very careful but I agree with you for a screen protector and a case, any recommendation for the case, I saw the origin HTC bi color case but some people said it makes scratches....!?!

speedmaster.nl said:
I'm very careful but I agree with you for a screen protector and a case, any recommendation for the case, I saw the origin HTC bi color case but some people said it makes scratches....!?!
Click to expand...
Click to collapse
That depends on how much protection you want and if you mind covering up the back of the phone (it's nicer than most phones so some people rather not).
http://www.basalent.com/htc-one-2013-m7-hybri-flex-crystal-clear-pctpu-case-white.html
That's the one I have, and I like it a lot. Protects the sides and the back, without covering the aluminum body.

sohungry said:
That depends on how much protection you want and if you mind covering up the back of the phone (it's nicer than most phones so some people rather not).
http://www.basalent.com/htc-one-2013-m7-hybri-flex-crystal-clear-pctpu-case-white.html
That's the one I have, and I like it a lot. Protects the sides and the back, without covering the aluminum body.
Click to expand...
Click to collapse
I never have much issue with screen scratches (usually) but I'd still err on the side of caution and do at the very least a screen protector. I'm going to replace my ZAGG (which I'm hoping is just scratched and not a crack on the screen ) with one of those fancy shmancy glass screen protectors with the rounded edges.

felacio said:
I never have much issue with screen scratches (usually) but I'd still err on the side of caution and do at the very least a screen protector. I'm going to replace my ZAGG (which I'm hoping is just scratched and not a crack on the screen ) with one of those fancy shmancy glass screen protectors with the rounded edges.
Click to expand...
Click to collapse
Ha ha, I have one of those fancy shmancy glass screen protectors. It feels nice and looks nice, but there are bubbles in the corners

TPU skin is good enough if you have good reflexes.
While it is falling, you'll probably break its fall by hitting it up. Plus you can find absolutely clear TPU skins.
A case is a must, screen protector is not.

What I do is whenever I get a brand new phone, I always start with a good protective case and a screen protector. After a few months, I gradually get thinner cases and usually end up with those 0.3-0.5mm thin cases that makes the phone feel nice and less bulky. If you plan to rock the phone naked, I'd recommend a phone pouch.
Sent from the "ONE" phone for me

Thank you very much for the quick response I'm still searching for a good frame or case, is it true that the origin HTC bi color case leaves scratches on the phone I won't believe it .....?! I also hope that the black version is scratch resistant some people said not......I just talked with a Vodafone assistant to change the black against the silver but he said to me that himself have the black one and I looks quite better and after two month usage without any case he have no scratches. I'll take the black one, it comes next week and I will give you a first impression.
Can't await

sauprankul said:
A case is a must...
Click to expand...
Click to collapse
WHY?

ro_explorer said:
WHY?
Click to expand...
Click to collapse
Its not REALLY a must IMO. The phone actually holds up very well. Yesterday i purposefully put the phone in the same pocket with a bunch of coins and it scratched the aluminum but the scratches wiped right off. If you drop things than that would be a different story at aluminum can easily dent :good:

That was my point also ... it looks a little exaggerated to say that a case is a must.
I intend to use the phone "naked" indoors. Any case will practically ruin the nice feeling of the phone itself. Of course, if you drop it then there are chances to ruin the nice finish.
I'm also using the phone outdoors, fr sports. For that purpose I ordered a trident kraken ams ... I hope it will do the job.
P.S.: I saw that a OEM housing is "only" 50 bucks, free shipping ... I guess I'll buy one just in case .

I would say that if you carry your phone in your pocket a case is a must. I generally like to go case-less (especially with a phone this pretty), but after having my One slip out of my pocket on a couple of occasions, I ended up getting a case (Poetic Atmosphere; the rubberized edges keep it from slipping out). If you intend on getting a pouch of some sort, I think case-free is fine.
Also, I don't have a screen protector and have no scratches, though I tend to be pretty gentle with my phones.

ro_explorer said:
That was my point also ... it looks a little exaggerated to say that a case is a must.
I intend to use the phone "naked" indoors. Any case will practically ruin the nice feeling of the phone itself. Of course, if you drop it then there are chances to ruin the nice finish.
I'm also using the phone outdoors, fr sports. For that purpose I ordered a trident kraken ams ... I hope it will do the job.
P.S.: I saw that a OEM housing is "only" 50 bucks, free shipping ... I guess I'll buy one just in case .
Click to expand...
Click to collapse
On Etradesupply, the OEM housing is only like 30 bucks.
I say a TPU case is a must because:
1) You WILL drop it at some point, it's anodized AL, not grippy plastic.
2) The case provides a lip, so if you put your phone face down, the screen won't touch the surface & scratch from w/e dirt is there.
3) The case will also keep the camera lens (or the anodized back) from touching any surfaces.
4) I wear a ring, and if I don't put a case on, the ring scratches ONTO the phone. That's not good.
If you're REALLY careful, then none of these matter. but it's hard to be perfect.
Besides, when I'm in bed, I can just quickly remove the case for a little bit. It feels nice.

This phone is just too good looking to cover up, IMO. I've been going naked since day one I don't have a single scratch on it. The aluminum housing is solid and whatever glass HTC used really resists scratching. My One X screen got covered in microscratches pretty quickly, but I haven't seen anything on this phone.
Just treat it with care and you can forget the case. CNET tried to destroy their test phone and couldn't do it.

I have a double dip case bought at once with the phone. Well .. the feeling simply does not compare with the case on. It just loos cheap and plastic'ish ... is worse than galaxy S4 actually. So, with all the risks involved I will go "naked" while in normal use and I will use the kraken ams for outdoors. That's all ...

I only like corner protection. I don't care about the back.
I used to have a screen protector on this but I don't like it, it doesn't make the display look as nice. I have since taken it off and have not gotten any scratches, not even micro ones. I think this display is more tough than previous GG2 screens. I had the ONE X+ and it scratched easily.
Get one of these: http://forum.xda-developers.com/showthread.php?t=2365102

After 8 hours....
....I'm going crazy with the phone, the App Store is horrible I found nothing what I need, i looking for the 8player and found many sites but not in the App Store, can't connect my iPhone via Bluetooth to import my contacts, also with the ipad...
The phone looks and feels awesome that's for sure but android is horrible, don't know what I should do.....please be so kind and give me recommendations, I won't give it back for the iPhone 5.......so I don't know what I should do!?!?!

speedmaster.nl said:
....I'm going crazy with the phone, the App Store is horrible I found nothing what I need, i looking for the 8player and found many sites but not in the App Store, can't connect my iPhone via Bluetooth to import my contacts, also with the ipad...
The phone looks and feels awesome that's for sure but android is horrible, don't know what I should do.....please be so kind and give me recommendations, I won't give it back for the iPhone 5.......so I don't know what I should do!?!?!
Click to expand...
Click to collapse
I respectfully disagree, as will most in this forum that Android is horrible.
Maybe you can post what apps you are looking for and other users can tell you if there are equivalent apps.

mfpreach said:
I respectfully disagree, as will most in this forum that Android is horrible.
Maybe you can post what apps you are looking for and other users can tell you if there are equivalent apps.
Click to expand...
Click to collapse
Hello Senior Member,
Thanks so much for your quick response, ok I'm impatient, I found the first app for my marantz av and the buffalo server which works its the bubbleUPnP and it works with the iPhone equivalent not still searching the for the 8player.

Grouped the best cases and accessories available for the ZTE Axon 7

I've gathered the best cases and acessories available for the ZTE Axon 7, here
https://android-repo.com/2016/08/27/best-cases-and-accessories-for-the-zte-axon-7/
Finding a decent tempered glass, i would say was challenging since the Axon isnt so popular yet, but this puppie seems to work ok!

The tempered glass looks promising, can i use it with a case? Or does the edges peels off due to the pressure exerted by the case ?

blitzkrieg19 said:
I've gathered the best cases and acessories available for the ZTE Axon 7, here
https://android-repo.com/2016/08/27/best-cases-and-accessories-for-the-zte-axon-7/
Finding a decent tempered glass, i would say was challenging since the Axon isnt so popular yet, but this puppie seems to work ok!
Click to expand...
Click to collapse
Thx for the link. I ordered the Skinomi Carbon Fibre set because of this. Dont mind buying that tempered glass, its absolutely terrible.
1. i had the golden one, its nothing like the phone´s natural gold color, it just looks terrible and cheap.
2. The sides peel off very quickly and the edges are not smooth, you cant even put the phone in your pocket without getting stuck on it. I had this even though i applicated the screen perfectly.
3. The protector is only adhesive on the edges, it comes off very easily
4. The phone sometimes does not detect your touch with this tempered "glass"
Good choice on the in ear headphones, but personally i prefer the Bose SoundTrue Ultra
Cant agree with the overear bose headphones though, the AKG K701 are far more superior (and cheaper!), but the cable is a pain in the a**. Huge connector which is almost as big as the phone itself, but the sound is not from this world.
Thanks!
---------- Post added at 11:48 AM ---------- Previous post was at 10:54 AM ----------
shellsuper said:
The tempered glass looks promising, can i use it with a case? Or does the edges peels off due to the pressure exerted by the case ?
Click to expand...
Click to collapse
it peels off by simply looking at it. Worst protector ive ever had.

deluxxx said:
it peels off by simply looking at it. Worst protector ive ever had.
Click to expand...
Click to collapse
Do you mean the Skinomi or TopAce screen protector?

this is the only screen protector without any reviews, good or bad. Keeping my eye on it.
https://www.amazon.com/Protector-LV...7_5?ie=UTF8&psc=1&refRID=JB7SM76Y8N6BNT184CH6

TopAce. Cant say anything about skinomi yet. im waiting for the shipping

This is absurd that no one can figure out how to cut a piece of rectangular plastic to the correct size.
Do me a favor and upvote and/or comment at the new product request forum at bestskinsever.com (link below). At least we know that Mike can do a bang-up job -- he just needs to know that there is a need:
https://bse.uservoice.com/forums/237647-new-product-forum/suggestions/15815908-zte-axon-7

Quick review of CoverON (google B01IPO3PJK). I'm big fan of hybrid rugged cases and this is perfect. It has small rise on front and little bigger on back. It protects front screen and back camera perfectly. With clear case that you get in box I got vibrations because fingerprint scanned my leg, this case solves it. It makes phone little bigger and good protected. Corners are soft, sides are plastic. Buttons are filled with TPU and are easy to press. Got holes for mics, headphone jack, charger.
Only con that I found that back and sideways are little slippery on flat surface. Hand grip is perfect.
All in all who wants rugged case and don't mind phone little bigger recommended! I bought from Ebay for 13 dollars shipped little expensive but very good case.
Here are pictures (first 3 from ZTE, others from samsung s4)

sipe1 said:
Quick review of CoverON (google B01IPO3PJK). I'm big fan of hybrid rugged cases and this is perfect. It has small rise on front and little bigger on back. It protects front screen and back camera perfectly. With clear case that you get in box I got vibrations because fingerprint scanned my leg, this case solves it. It makes phone little bigger and good protected. Corners are soft, sides are plastic. Buttons are filled with TPU and are easy to press. Got holes for mics, headphone jack, charger.
Only con that I found that back and sideways are little slippery on flat surface. Hand grip is perfect.
All in all who wants rugged case and don't mind phone little bigger recommended! I bought from Ebay for 13 dollars shipped little expensive but very good case.
Here are pictures (first 3 from ZTE, others from samsung s4)
Click to expand...
Click to collapse
I picked this case up as well. My only company about it is the silicone around the USB-C port is rather weak and doesn't fit well. I have a Spigen case in a similar style for my m9 and I didn't have this issue. For now it's a nice case but I'll be keeping an eye out for a better fitting case.

blitzkrieg19 said:
Finding a decent tempered glass, i would say was challenging since the Axon isnt so popular yet, but this puppie seems to work ok!
Click to expand...
Click to collapse
I bought one of those and it fell off in only a few hours. The halos are awful, but you can't see since the edges aren't clear. This screen protector is actually worse than others because no adhesive in the middle, so it comes off very easily and creates a halo rainbow effect in the middle of the screen. There was also a noticeable bowing of the screen protector whenever you tapped the screen because there's going to be a gap between the touchscreen and the glass. If you use a case, you may be able to prevent the sharp edges from cutting your fingers, but otherwise don't even bother. My experience with this was awful, I wouldn't wish this screen protector on my worst enemies.

Anyone found a case similar to the included clear TPU case that has more protection around the screen (bigger lip around the screen)?
http://m.ebay.ca/itm/New-Ultra-Thin...617423?varId=411017927173&txnId=1568928808001
I just received the above gray TPU case, and while the matte back is great, it has a smaller lip around the screen than the Axon's included case. When placed face down, the glass screen will actually rest on the surface, not the edges of the case.

I'm using a transparent slim hard case. It gives minimum protection but has a lip around the sides (very small) so the screen is not hitting the surface. I'm very pleased with it, and it ads grip to the device.
http://s.aliexpress.com/fuUJJvQN

Slipgrip Car Mounts
I see that Slip Grip Car mounts have added car and bike mounts for the Axon 7 using various cases. Axon 7 mounts, using Generic Cases. I really like these mounts because they are custom made for a certain phone in a specific case. The ones I have used hold really well, even when off-roading in a Jeep or going over railroad tracks on my bicycle.
It's nice to see that they are supporting some of the A7 cases I have seen mentioned here.

This guy shows off 4 different cases.
https://youtu.be/xUrgLUPaAOM
Sent from my ZTE A2017U using Tapatalk

((RayDar)) said:
I see that Slip Grip Car mounts have added car and bike mounts for the Axon 7 using various cases. Axon 7 mounts, using Generic Cases. I really like these mounts because they are custom made for a certain phone in a specific case. The ones I have used hold really well, even when off-roading in a Jeep or going over railroad tracks on my bicycle.
It's nice to see that they are supporting some of the A7 cases I have seen mentioned here.
Click to expand...
Click to collapse
I ride a motorcycle, a Suzuki GSX S750. Think the bike mount would work out at the higher speeds?
Sent from my HTC One_M8 using Tapatalk

Slipgrip Car Mounts
polar2792 said:
I ride a motorcycle, a Suzuki GSX S750. Think the bike mount would work out at the higher speeds?
Click to expand...
Click to collapse
This puts me in a difficult spot. I don't want to be the guy who says 'yeah, that should work' because I would feel responsible if it fails. I have been using these on my bicycle for years and I have only had one failure, which was completely my fault. It was a particularly rainy day and I wrapped my phone in a ziplock bag. The extra plastic made the phone bigger and the bag zipper was pressing against the release clasp. I could tell that it wasn't being held as snugly as normal, but I thought it would be good enough. When I hit about 37 MPH going down hill (in hindsight, perhaps I shouldn't have been going that fast on a rainy day), I hit a bump which dislodged my phone. Lucky for me, it was connected by a short charging cable that I had wrapped around the mount. The phone dangled upside down for a while before I even noticed.
The connection to the handlebar is very secure and the connection from the mount to the bracket is as well. The weak spot is the clasp that hooks around the phone in the middle of one side. With a large enough force, the phone can probably overcome the spring strength of the clasp and become dislodged, although I haven't seen this happen under normal circumstances.
I am not willing to say for sure that these will mounts will work flawlessly on a motorcycle, but they might. You should e-mail the guy at slipgripcarmounts.com and asks what he thinks. It seems like he custom-makes each order and so he might be willing to make a custom version that has a larger or longer clasp for you. Another option, for extra insurance, could be to loop a rubber band or piece of string around the base of the mount and connect it to the clasp to hold it closed in extreme conditions (although such a measure would obscure the middle of the display).
I hope this helps.

((RayDar)) said:
This puts me in a.... I hope this helps.
Click to expand...
Click to collapse
Ok sounds like it would work but like you say I will email the fellow to see what he thinks. I've been looking at normal mounts and there isn't that many custom made ones. I don't want just a generic one you know? Especially with a $400 dollar investment in it. Thanks for the reply!
Sent from my ZTE A2017U using Tapatalk

I bought the red one as it looks like Iron-Man
https://www.aliexpress.com/item/Lux...32705386418.html?spm=2114.13010608.0.0.Wa7b54
Fits pretty snug!

I picked up a generic Chinese temper glass protector off ebay for around $3 shipped and it works okay.
I almost thought they sent me the wrong one because it does not completely cover the black portion of the screen, but does cover most of the actual visible screen portion. As have found out the slight curve of the screen (similar to the Note 4 IMO) makes it difficult for hard screen protectors to work.

Sirradiodude said:
I picked up a generic Chinese temper glass protector off ebay for around $3 shipped and it works okay.
I almost thought they sent me the wrong one because it does not completely cover the black portion of the screen, but does cover most of the actual visible screen portion. As have found out the slight curve of the screen (similar to the Note 4 IMO) makes it difficult for hard screen protectors to work.
Click to expand...
Click to collapse
Odd that it halos on the top and bottom yet those areas of the screen are flat. Is the adhesive on the glass protector just poorly applied?

LG V20 ZiZO ion series cover ($13.99)

[Okay! I just got my cover (1 day before it was supposed to arrive LOL just like it happened with my V20). Anyway. This is my review:
First of all, here is the link to purchase the cover (maybe cheaper in other websites, maybe not):
http://www.ebay.com/itm/26267917850...49&var=561595568110&ssPageName=STRK:MEBIDX:IT
Now, lets proceed by telling you what was included:
1x Heavy duty cover (dual layers, 3 pcs); 1x Premium Tempered Glass; 1x Dust absorbant cloth; 1x Cleaning wipe
Finally, Lets get to the review! The good and the bad:
The good: I like the cover. So far i dropped the phone from 3 feets and nothing happened to it. The cover meets Military Grade 810.1-G Compliancy. The first layer feels like a fat layer of clear TPU but it doesnt feel bad at all. The outer layers are made of Polycarbonate to absorb the falls. The TPU layer is enough to absorb the impact but the 2 layers of polycarbonate have 2 purposes to protect, but also to make the phone adjust firmly in the cover. The audio jack and the type c usb port both have dustproof covers so that it doesnt penetrate any dust particles. easily to open and close. With this cover you will be able to use every functionality. Including IR Blaster, and every mic has its big enough hole to let the voice sound as clear as possible. cover doesnt feel bulky, to put it inside your pocket with or without cover, you wouldnt notice the difference (see the picture of the rule and measure your phone with one). it is very light too. Now, the screen protector, im sure it was premium, but i messed up putting it (STUPID DUST PARTICLES FLOATING EVERYWHERE), so now i have to buy a new screen protector lol.
The bad: 1) Your fingerprints will stay on the TPU layer (light fingerprints) but they still there. So,,, if you are into security and no trusting anyone and thinking about someone will do conspiracy against you and will use your fingerprint to unlock the phone, well,,,, it is not for you, unless you paint it with an spray ; 2) possibly another bad side: if you are no accustomed to the volume buttons on the side of the device and have to constantly looking for where exactly to press, then this is not a cover for you, since the buttons totally disappear with it. On the other hand, they are easily to press if you are accustomed to the volume buttons on the side; 3) The cover might slip if the material of the surface were you put it is made of Anodized aluminum or any other material that has been processed or polished.
Funny Fact: Seems that they created the cover missing some information about the phone's physic, since they added a button in the right low side of the cover which has no purpose there LOL!
I havent had any scratch so far (from the fall) yet.
If there is any question, please let me know, and i will try to answer. Or any other comments.
Cheers!

@aknotts415 >> here is what i think about the cover. Pictures are on the first post too

haha..thanks...i was just about to post here and ask if anyone has any thoughts on this case...i'm stuck between this zizo and the poetic...
i dont want to take any chances...I had a Note 7..then replaced it with a recalled version...had a nice spigen tough armor case on it but no screen protector...I accidentally dropped it at work and managed to somehow scratch the screen lightly..i guess it doesnt matter since i'll be replacing it with my LG V20 arriving tomorrow...:good:
**oh, could you post some more pics with the case on...maybe during the daytime with more lighting...so how was the tempered glass protector??? was it actually pretty thick, and any advice on getting it on perfectly???

iLLxLBPSTi said:
haha..thanks...i was just about to post here and ask if anyone has any thoughts on this case...i'm stuck between this zizo and the poetic...
i dont want to take any chances...I had a Note 7..then replaced it with a recalled version...had a nice spigen tough armor case on it but no screen protector...I accidentally dropped it at work and managed to somehow scratch the screen lightly..i guess it doesnt matter since i'll be replacing it with my LG V20 arriving tomorrow...:good:
**oh, could you post some more pics with the case on...maybe during the daytime with more lighting...so how was the tempered glass protector??? was it actually pretty thick, and any advice on getting it on perfectly???
Click to expand...
Click to collapse
When i come from college today at 11 am i will posting more pictures from every angle.. Now, about the tempered glass, it is very thick. if it werent for the dust particles in my living room, i would have put it perfectly, Something that i like is that when you put the screen protector, and the put the cover, there is no way any dust will go inside, at least from the front part, since the polycarbonate layer presses the tempered glass, hard enough to no let any dust go inside. So, neither from the front nor the audiojack nor the type c port, you will get dust. I just bought 2 tempere glasses on ebay ahhahahah.
Few advices to put it perfectly: go to a place inside your house where there is the least amount of dust (no air conditioner, no windows, and no fans rotating), clean your hands with alcohol, and let it dry. then start from the hardest part, The top, as soon as you align the top and the edges on the top, it wil become easier. Now, i noticed that many of the screen protectors, such as this one:
https://www.amazon.com/Mr-Shield-Te...ywords=lg+v20+tempered+glass+screen+protector
Are not been built correctly. As you can see on the reviews, you will see people talking about the tempered glass not properly adjusting to the edges, And to be honest, i dont know if this tempered glass i used but put wrong had the same issue since i see the edges not properly adjusted . maybe because i removed it 2 times and put it back on, or maybe is the built quality. Anyway, im going to wait for the other tempered glasses. and see if those have the same issue.
i bought this one:
http://www.ebay.com/itm/182283071096?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

joseguillen1994 said:
@aknotts415 >> here is what i think about the cover. Pictures are on the first post too
Click to expand...
Click to collapse
Sweet case. Thanks for putting up pics. Does the black outer pieces feel cheap?

joseguillen1994 said:
When i come from college today at 11 am i will posting more pictures from every angle..
Click to expand...
Click to collapse
looking forward to seeing more pics of the case

aknotts415 said:
Sweet case. Thanks for putting up pics. Does the black outer pieces feel cheap?
Click to expand...
Click to collapse
It doesnt feel bad, it could be better though if it were aluminum probably. But i figure that the polycarbonate absorbs impact better than metal. Also, please revisit the the first post of the thread, i made some changes into my review you might want to read.
aknotts415 said:
looking forward to seeing more pics of the case
Click to expand...
Click to collapse
Im Posting the 2nd wave of pictures now

2nd wave of pictures (will also be posted on first post)
Sorry for the bad quality, i was shooting with my LG G3 LOL

joseguillen1994 said:
Sorry for the bad quality, i was shooting with my LG G3 LOL
Click to expand...
Click to collapse
nice pics! you still have the plastic on the fingerprint scanner btw lol

aknotts415 said:
nice pics! you still have the plastic on the fingerprint scanner btw lol
Click to expand...
Click to collapse
Loooooool yes. I even have the plastic in the camera and the back of the phone

Does the case block off the 2nd screen? From the official site pics, it seems like it.

thx for posting up more pics...i will definitely order this soon...my phone will be here in an hour or two...
Logi23 said:
Does the case block off the 2nd screen? From the official site pics, it seems like it.
Click to expand...
Click to collapse
it doesnt look like it does..if you look at pics 8...shows a good gap between the regular battery/time info and the top portion of the case...

Logi23 said:
Does the case block off the 2nd screen? From the official site pics, it seems like it.
Click to expand...
Click to collapse
Nope. It doesnt. it leaves even an extra small space after the 2nd screen just to make sure that every touch does work. Also it leaves a small space after every edge for the same reasons. :good:

joseguillen1994 said:
Nope. It doesnt. eat leaves even an extra small space after the 2nd screen just to make sure that every touch does work. Also it leaves a small space after every edge for the same reasons. :good:
Click to expand...
Click to collapse
Ah, I gotcha. Wonder why the pics from their official site and ebay show the front panel like it covers the whole second screen for some of the case colors.

Logi23 said:
Ah, I gotcha. Wonder why the pics from their official site and ebay show the front panel like it covers the whole second screen for some of the case colors.
Click to expand...
Click to collapse
Oh! you are right hahahah. I didn't notice that until i went to the same link on ebay now. The black one shows the 2nd screen, but the others show it as covered . hahaha Probably for the same reason they added something extra to the case that it didnt need to be there as you might have noticed in the picture #8 of the first post i uploaded. But just to play safe, if you will bu y the cover, ask them first.

So my charging flap is already not staying put. I only charged it once and the flap is already loose .
Sent from my LG-H918 using XDA-Developers mobile app

i went ahead and ordered one as well...also ordered this for when im in the house and dont need the full protection...

I ordered the green one. Too cheap to pay for expedited shipping so not sure how quickly it will be here.
My v20 will be here tomorrow and my cheap case from Amazon prime will also be here tomorrow!
Sent from my awesome T-Mobile LG V10!

Jooosty said:
So my charging flap is already not staying put. I only charged it once and the flap is already loose .
Sent from my LG-H918 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah at first i thought the same about mine. But then after a minute or 2 it came back to normal and iI t stayed put covering pretty well. Did you try after a short period of time?
Well , for the time being, i did a little adjustment to mine lol and it worked. I put a very very very thin layer of superglue on the edge of the port-cover and waited for it to dry, now the superglue is part of the case, but now the dustcover protector stays there the second i want it to stay there. Although it is not necessary because as i said before, it will come back to normal after about 1 minute or 2 minutes.
On the other hand, I just dont want to return the cover and have my phone naked for another week LOL . And also, i kind of like how thin it is yet very protective. and the seller gave me $5 dollars back because seems like the "premium screen protector" is one of those that wont stick to the edges correctly, althoguht it might have been my fault since i removed it 3 times and put it back on.

planetbeen said:
I ordered the green one. Too cheap to pay for expedited shipping so not sure how quickly it will be here.
My v20 will be here tomorrow and my cheap case from Amazon prime will also be here tomorrow!
Sent from my awesome T-Mobile LG V10!
Click to expand...
Click to collapse
Hey i have a question. when you open the cover to plug the usb charger, does it remains open? or is it like mine that after a few minutes it does closes okay?

Plastic back film for back of the G6?

I was wondering if there is any plastic film to put on the back of the phone? Also maybe on the sides.
I have a case on the phone (ringke) and dust and lint gets in behind the phone.

Your best bet would be a phone skin. As far as the sides they come pretty well protected with sections of film front the factory I never take those off. Also consider nightly taking 2 mins before putting phone on charger and taking case off wipe phone down and case before reinstalling the case. If not a phone skin is gonna be your best bet. They make them clear

I was also wondering the same thing. I once used a tempered glass back for my Samsung s6 edge once but that interfere with the case. I guess plastic would be a lot thinner. I'm also interested in a clear plastic for the camera lens.

hero4eva said:
I was also wondering the same thing. I once used a tempered glass back for my Samsung s6 edge once but that interfere with the case. I guess plastic would be a lot thinner. I'm also interested in a clear plastic for the camera lens.
Click to expand...
Click to collapse
Really thinking that anything over the camera lens is going to cause issues. Truly. But you could get one of the universal plastic covers and cut it to fit

lg3FTW said:
Really thinking that anything over the camera lens is going to cause issues. Truly. But you could get one of the universal plastic covers and cut it to fit
Click to expand...
Click to collapse
Was thinking more like the dbrand warps, I've seen they have a piece that covers the camera lens with hole cutout for the camera and flash. Now if I can find something less fancy and cheaper than dbrand it'll do me.

Amazon has some from kleerlock and skinomi.

jason1332 said:
Amazon has some from kleerlock and skinomi.
Click to expand...
Click to collapse
Thanks that's exactly what I was looking for

Unfortunately I don't get Amazon here in Australia.
Hopefully it becomes more common and more sellers sell these protectors/skins

jakeyo said:
Unfortunately I don't get Amazon here in Australia.
Hopefully it becomes more common and more sellers sell these protectors/skins
Click to expand...
Click to collapse
I'm from Australia as well. Just used the filter in Amazon to show only seller who's willing to ship to OZ

I've been lookin for wraps and skins, but comes to $28 aud here.
All I'm really after is a clear screen-protector type for the back of the phone for $1 off ebay.... hmm