Develop Bugs

OnePlus 3 bootloader defaulting to recovery

Hello,
I am having a problem where my phone is only, as far as I can tell, willing to boot into recovery. From the system, doing a normal reboot ends up in recovery, from powered off it goes into recovery, rebooting from recovery to system ends up back in the recovery, and the fastboot menu's "Continue" option goes reboots to recovery. The only way I can get into the system is to boot via fastboot -- i.e.,
Code:
fastboot boot boot.img
Where boot.img is the one packaged with the rom I am currently running.
This is not convenient because I need to connect it to a computer!
Is there some way to tell the bootloader to not boot recovery by default?
I have tried simply flashing the boot.img from above with:
Code:
fastboot flash boot boot.img
Which doesn't have any noticeable effect.
I suspect I broke something last night kicking around. I flashed the Open Beta 10 Modem & Firmware, then flashed the Open Beta 10 recovery, before changing my mind and installing TWRP 3-28 and Resurrection Remix v5.8. Somewhere in there, fastboot -w got run, but I don't think I did anything else potentially destructive.
Thanks for reading!

Hmm... Try install boot into recovery partition and recovery into boot? I know it's sound like a joke, but it will probably help you while u wait for a beter solution or just solution to repair that problem.
Anyway - maybe try flash old MM firmware?

A solution for me...
For anyone who rolls along and sees this in the future, my fix was:
0. Take a backup of sdcard AND data -- Step 2 will wipe data and sdcard without asking
1. Download the official recovery for the OnePlus 3
2. Use fastboot to boot (I didn't even have to flash) the official OnePlus 3 recovery AGAIN: WARNING: This step wipes all data without asking for confirmation!!!
I have now installed TWRP-3.0.4.0 and Resurrection Remix v5.8.1-20170202 and everything seems to be working just fine.
Thanks to @sylviohneto for finding this fix here: https://forum.xda-developers.com/oneplus-3/help/critical-bootloader-boot-recovery-fresh-t3530283

I had same problem so for that just take nandroid backup of data and while in turn copy it to pc and any other backup of data you need then format all the partions and reinstall rom and restore data... And if your lock screen have security then check Google you will have to delete a file called locscreen.db from file manager in twrp to access your phone

twrp not mounting data, storage

So i unlocked my bootloader few days ago, installed twrp and magisk. Everything was working fine , so I decided to unlock critical to flash bootloader in the future if required. It was done successfully and the fastboot own device command shows that both are unlocked. But when I rebooted it kept taking me to twrp and shows unable to mount data and storage and then rebooted. I went to twrp recovery through fastboot and tried to restore a previous backup for which it restored the system portion and said data failed to mount. When I try mounting data and storage manually, it does not let me tick it. Can someone please help, I used to do rooting back in the nexus 4 days and just not familiar with this new partition a b system.
Thanks

EnIXmA said:
So i unlocked my bootloader few days ago, installed twrp and magisk. Everything was working fine , so I decided to unlock critical to flash bootloader in the future if required. It was done successfully and the fastboot own device command shows that both are unlocked. But when I rebooted it kept taking me to twrp and shows unable to mount data and storage and then rebooted. I went to twrp recovery through fastboot and tried to restore a previous backup for which it restored the system portion and said data failed to mount. When I try mounting data and storage manually, it does not let me tick it. Can someone please help, I used to do rooting back in the nexus 4 days and just not familiar with this new partition a b system.
Thanks
Click to expand...
Click to collapse
I would one if two things. First, try fastbooting the stock boot.img to whatever current rom your on, and let it boot up. If successful, then go back to bootloader/fastboot mode, fastboot temporary twrp, then once in twrp, flash the twrp.zip, custom kernel, then magisk. Hopefully that fixes it. If not, then dirty flash your rom, let it boot up, then go back and do the twrp stuff :good:

Yea that fixed it.. thanks

Mi Max 3 6/128 SoftBrick - What to Do?

Hello,
I have a Mi Max 3 6GB/128GB which I got from the UK which arrived unlocked and with Global Stable ROM installed which actually updated to V10.3.3.0.PEDMIXM by OTA - I tested.
fastboot getvar anti shows failed, so I assume no Anti Rollback Protection, which I thought a little strange, it being MIUI 10 with (after OTA) June 2019 security patch.
I spent the last couple weeks setting up the phone to my liking (I have 300 apps installed) and finally finished yesterday.
Then I wanted to uninstall some Google/Facebook/Xiaomi bloatware using the excellent "Xiaomi ADB/Fastboot Tools".
I was pretty careful in my opinion to only remove the safe ones (the tool claims to only show you the safe ones) like Music, Video, MiPay, MiCloud, MiForum, MiSIM and all Facebook in the ADB section of the tool.
The I switched in fastboot and thought it would be a good idea to wipe Cache (nothing else).
Upon restart the Mi Max 3 first shows the black boot screen with unlock written at the bottom, then changes to the normal boot boot screen with MIU and the points at the bottom showing that it is busy booting. It stayed there for a while and I thought maybe it was rebuilding the cache and it took that long, but after 30 min still no luck.
Then I fired up the "Xiaomi ADB/Fastboot Tools" on my PC again and it told me the phone was in ADB mode, I could reboot into system mode, where the same thing happened - no progress in booting.
I cannot turn off my phone either, but I can switch from sastem boot (which gets stuck) into fastboot mode via ADB.
Would someone know what's wrong and what I can do to get my phone out of that bootloop while hopefully maintaining all my data and setups, on which I worked for weeks?
Thank you so much for your help!
P.S .: In case it could help: I could read out the phone properties of the Mi Max using the "Xiaomi ADB / Fastboot Tools" while it was softbricked, meaning the ro. init. persist. sys. and dalvik. values of the smartphone. I am happy to post them here, if requested.

Hi,
Do you have an SD card? If so, remove it, because as you cleared the cache, I think it might be a problem with encryption (lost reference).
In your case, I believe a reset will work again, but you will lose application configuration data. Via ADB you can backup files only.
If you do not have unlock bootloader, be very careful as you will not be able to flash TWRP or others.
Good luck!

Thanks, the phone came from the vendor with Global Stable ROM and unlocked. It may be an unofficial unlock, though I was able to install OTAs.
I don't have SDCard.
How can I do ADB backup?
I was able to flash official TWRP just a few minutes but it couldn't access data, maybe because it is encrypted. Now I think I will try and install latest Orange Fox r10 stable, which I think should be able to handle decryption, so that maybe I will be able to get at my date.
Any other advice?

Hi,
Now that you have TWRP, clear cache / dalvik from TWRP and try starting again, maybe start system.
About copy via adb follows a link below:
https://www.lifewire.com/use-minimal-adb-and-fastboot-4582201
in step 2
"
The command to move files from your computer to your phone is adb push.
To move files from your phone to your computer the command is adb pull.
"
Through TWRP you may also be able to back up. Go to (mount partitions) and select all partitions.
Make sure the TWRP MTP option is on, it will allow the device to be mounted via usb on your computer.
I use TWRP I use nijel8, it works very well.
https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
If you can't launch system, you will have to reinstall the Rom.
Good luck!
PS.
More help for adb.
https://forum.xda-developers.com/android/help/adb-fastboot-commands-bootloader-kernel-t3597181

Thanks for your advice!
I first used the official TWRP and I was able to flash it and start it.
But then the wipe of cache and dalvik failed.
And I could not mount data etc..
When I tried to repair the file system with TWRP I got error 255 - unable to repair data from fsck.f2fs.
Then I saw in your signature that you use nijel8's TWRP and I read that thread, and I started to understand, that my TWRP errors most likely originate from TWRP not being able to decrypt my partitions.
However, towards the end of the thread it seemed that nijel8 stopped working on that project and then Xiaomi once again changed the encryption in MIUI 10/Pie and so it was recommended first to use an obscure Chinese TWRP and then to move on to Orange Fox Recovery Project, which supposedly can handle the decryption better. So that's what I got and I am just about to install it and see if I can rescue or even repair anything.
If you have any other tips for me, I would be very grateful.

You have explored the possibilities well, at the moment I dont have more options regarding current system recovery / backup.
The encryption error resolves you by formatting the user partition by TWRP, in the option to format f2fs plus the installation of a custom Rom or Xiaomi.eu.
Look for tutorials and other reviews before testing these procedures.
Remember that there is a big achance of your ARB model as well.
Good luck.
PS. You can try dirty flash. Find an recovery Rom same version, and flash via TWRP.

Pixel Experience boot loop + string of stupid decisions: is there any way out?

Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!

mkohan said:
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Click to expand...
Click to collapse
I'm new to this phone as well (but not to Android). Try the following:
Download TWRP from here -> https://androidfilehost.com/?fid=6006931924117884758
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip from here -> https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Power off phone. Hold down volume down and power button to boot into fastboot
Give the command fastboot flash recovery twrp-3.3.1-1-whyred.img to flash the recovery you downloaded earlier.
Boot into recovery
Flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip that you downloaded earlier
The above steps will at least ensure that you retain TWRP and it doesn't get overwritten by stock MIUI recovery
After that, check whether or not your phone/ROM has anti-rollback enabled and take appropriate steps accordingly.

Ok so i flashed PE 10 plus today and was met with the same problem.
Heres how i solved it
Goto fastboot option by pressing volume down and power button
Connect to pc (If it doesnt recognize, reinstall Adb drivers and phone drivers)
If it asks for decryption password just press cancel
Wipe data/internal/vendor (wont be able to wipe dalvik as it wont mount)
Flash PE 10 Plus and nothing else.
It should boot just fine.
However i run into bootloop if i flash latest magisk so i cant root my phone :/
Hope this helps

mkohan said:
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
Click to expand...
Click to collapse
hey read your post
actually adb and fastboot are two different things.
and recovery is flashed using fastboot commands not adb.
sometimes if a rom is not booting it may have issues with encryption.

Xiaomi Mi 10T keeps booting into fastboot

Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin

Leonniar said:
Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin
Click to expand...
Click to collapse
Can you flash full rom with mi flash tool

Rares6567 said:
Can you flash full rom with mi flash tool
Click to expand...
Click to collapse
Already did, it didn't work...

Leonniar said:
Already did, it didn't work...
Click to expand...
Click to collapse
Maybe is some motherboard issues?

I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread

Leonniar said:
I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread
Click to expand...
Click to collapse
There is no volume buttons problem?
If no maybe you should reflash whole phone, fastboot, recovery, all, using edl ig.... I don't have this phone or any Snapdragon phone, so I don't really know....

Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)

Leonniar said:
Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)
Click to expand...
Click to collapse
So then why your phone goes to fastboot?

I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off

Leonniar said:
I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off
Click to expand...
Click to collapse
It seems that this a software bug ig, can you try go to recovery and flash the rom?

I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file

Leonniar said:
I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file
Click to expand...
Click to collapse
So where u downloaded the fastboot rom, there is a recovery rom too :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Be sure u download the recovery rom not fastboot.
Btw use your miui version u had

Tho I'm not 100% sure if you flashed the fastboot rom correctly, did u :
1. Open MiFlashTool : download the tool from here if you don't have it ---> https://xiaomiflashtool.com/
2. Select your rom ( make sure your path to the rom isn't long and the folder/folders don't have long names )
3. Connect your phone
4. Click Refresh ( to make your device appear)
5. And click flash

I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread

Leonniar said:
I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread
Click to expand...
Click to collapse
Ok so to fix the error : go to miflashtool folder and create a new folder called : log

Fixed the start up error, I get the screen that says "Please install driver", I press Install and I get this:
https://prnt.sc/I53g6bs_8i5w
Pressing ok gets me back to the "Please install driver" screen

Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system

Rares6567 said:
It seems that this a software bug ig, can you try go to recovery and flash the rom?
Click to expand...
Click to collapse
flashing miui_APOLLOEEAGlobal_V12.5.4.0.RJDEUXM_451a2324af_11.0.zip from stock recovery is good idea, you can do this from MicroSD card to circumvent any usb issues you are obviously facing on fastboot.

Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
So it worked?
This "error" isn't an "error" so don't worry about it

Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
This error is normal since you are not re-locking the bootloader.
If some functions are inoperative.
Try to flash the same rom (fastboot) that you had when you bought the phone, probably an A11.
Use clean all(flash_all.bat).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/