Hello,
I have a Mi Max 3 6GB/128GB which I got from the UK which arrived unlocked and with Global Stable ROM installed which actually updated to V10.3.3.0.PEDMIXM by OTA - I tested.
fastboot getvar anti shows failed, so I assume no Anti Rollback Protection, which I thought a little strange, it being MIUI 10 with (after OTA) June 2019 security patch.
I spent the last couple weeks setting up the phone to my liking (I have 300 apps installed) and finally finished yesterday.
Then I wanted to uninstall some Google/Facebook/Xiaomi bloatware using the excellent "Xiaomi ADB/Fastboot Tools".
I was pretty careful in my opinion to only remove the safe ones (the tool claims to only show you the safe ones) like Music, Video, MiPay, MiCloud, MiForum, MiSIM and all Facebook in the ADB section of the tool.
The I switched in fastboot and thought it would be a good idea to wipe Cache (nothing else).
Upon restart the Mi Max 3 first shows the black boot screen with unlock written at the bottom, then changes to the normal boot boot screen with MIU and the points at the bottom showing that it is busy booting. It stayed there for a while and I thought maybe it was rebuilding the cache and it took that long, but after 30 min still no luck.
Then I fired up the "Xiaomi ADB/Fastboot Tools" on my PC again and it told me the phone was in ADB mode, I could reboot into system mode, where the same thing happened - no progress in booting.
I cannot turn off my phone either, but I can switch from sastem boot (which gets stuck) into fastboot mode via ADB.
Would someone know what's wrong and what I can do to get my phone out of that bootloop while hopefully maintaining all my data and setups, on which I worked for weeks?
Thank you so much for your help!
P.S .: In case it could help: I could read out the phone properties of the Mi Max using the "Xiaomi ADB / Fastboot Tools" while it was softbricked, meaning the ro. init. persist. sys. and dalvik. values of the smartphone. I am happy to post them here, if requested.
Hi,
Do you have an SD card? If so, remove it, because as you cleared the cache, I think it might be a problem with encryption (lost reference).
In your case, I believe a reset will work again, but you will lose application configuration data. Via ADB you can backup files only.
If you do not have unlock bootloader, be very careful as you will not be able to flash TWRP or others.
Good luck!
Thanks, the phone came from the vendor with Global Stable ROM and unlocked. It may be an unofficial unlock, though I was able to install OTAs.
I don't have SDCard.
How can I do ADB backup?
I was able to flash official TWRP just a few minutes but it couldn't access data, maybe because it is encrypted. Now I think I will try and install latest Orange Fox r10 stable, which I think should be able to handle decryption, so that maybe I will be able to get at my date.
Any other advice?
Hi,
Now that you have TWRP, clear cache / dalvik from TWRP and try starting again, maybe start system.
About copy via adb follows a link below:
https://www.lifewire.com/use-minimal-adb-and-fastboot-4582201
in step 2
"
The command to move files from your computer to your phone is adb push.
To move files from your phone to your computer the command is adb pull.
"
Through TWRP you may also be able to back up. Go to (mount partitions) and select all partitions.
Make sure the TWRP MTP option is on, it will allow the device to be mounted via usb on your computer.
I use TWRP I use nijel8, it works very well.
https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
If you can't launch system, you will have to reinstall the Rom.
Good luck!
PS.
More help for adb.
https://forum.xda-developers.com/android/help/adb-fastboot-commands-bootloader-kernel-t3597181
Thanks for your advice!
I first used the official TWRP and I was able to flash it and start it.
But then the wipe of cache and dalvik failed.
And I could not mount data etc..
When I tried to repair the file system with TWRP I got error 255 - unable to repair data from fsck.f2fs.
Then I saw in your signature that you use nijel8's TWRP and I read that thread, and I started to understand, that my TWRP errors most likely originate from TWRP not being able to decrypt my partitions.
However, towards the end of the thread it seemed that nijel8 stopped working on that project and then Xiaomi once again changed the encryption in MIUI 10/Pie and so it was recommended first to use an obscure Chinese TWRP and then to move on to Orange Fox Recovery Project, which supposedly can handle the decryption better. So that's what I got and I am just about to install it and see if I can rescue or even repair anything.
If you have any other tips for me, I would be very grateful.
You have explored the possibilities well, at the moment I dont have more options regarding current system recovery / backup.
The encryption error resolves you by formatting the user partition by TWRP, in the option to format f2fs plus the installation of a custom Rom or Xiaomi.eu.
Look for tutorials and other reviews before testing these procedures.
Remember that there is a big achance of your ARB model as well.
Good luck.
PS. You can try dirty flash. Find an recovery Rom same version, and flash via TWRP.
Related
I live in Taiwan and order my oneplus3 from China, but not from the official seller
Jindong or oneplus site but form 3rd party seller on Taobo, which is in Shenzhen.
Thay have sold hundreds of oneplus3 and have most high praise in Taobo- Shenzhen
My oneplus3 take over 7 days shipping to my hand.
While I 1st unbox my oneplus on 9/6 , it has already bootloader unlock and TWRP 3.2.0 installed. As you know, the 3 party seller sold me the used device, but it's not fake, it has full package and correct IMEI with it, I also cheked IMEI on oneplus official site.
I have no choice but jut to accept a used device with new-one price.
I immediately update to official TWRP 3.2.1 and install freedomOs CB 1.6, XPOSED, rooted, everything looks fine.
But after 4 days uesd, while I change system font with ifont and it won't boot to system, jut stuck at 1+ boot screen, after
a dozen of secnods , automatically boot into TWRP , it even can't boot into TWRP , just hang on TWRP logo,
Fastboot flash other version of TWRP, still can't boot into both system and TWRP.
After fastboot flash stock recovery, it can boot into recovery, and then flash TWRP -> boot in TWRP. But still can't mount system/data/cache, some boots even unable to mount internal storage.
(While on stock recovery, ADB sideload OTA.zip from official site always stuck at 47%)
Fastboot erase usersdata and TWRP format still don't work, no lucky, can't mount system/data/cache.
I ask my colleague hand carry my oneplus3 during his business trip, return it to the 3rd party seller. The 3rd party seller only took 3 days to ship to oneplus to fix it and return to them, and .. return to my colleague.
While my colleague got the phone, it work fine with bootloader lock, Chinese H2 OS for more then one week.=>( So that it's not the hardware issue, not internal SD Corrupt?)
I ask he to test it as he can, after 2weeks. He come to Taiwan and bring it to me. He dose not find any problem with daily use on bootloader locked H2 OS.
When I got the "return" oneplus 3 ,
fastboot unlock booloader->
Decrypt follow this: Decrypt OxygenOS without losing data
i also see this:SOLVED][TWRP]Unable to Decrypt Storage
I think is might be CB rom Unstable and encryption issue.
So I install FreedomOS 1.6 and decrypt data this time.
But guess what happen!?
It have happen again and again more then 5 times -
no flash anything, no reboot, just in system used-> got lag->got black screen-> got reboot->unable to reboot system-> unable to mount/wipe/restore data/system/cache in official TWRP.
The only solution seems to "fastboot format users data" , then I can mount/restore/format data/cache/system , till now, i am confused, I don't know if its software or hardware issue, I just spent too many hours on it!
Please help, any advise is welcome...and.. sorry for my English, tried my best.
This issue is really weird.
Can you share the logs given by TWRP, with the kernel log of your twrp recovery.
To do:
Code:
adb shell
dmesg > /tmp/dmesg.log
exit
adb pull /tmp/recovery.log <path_on_your_computer>
adb pull /tmp/dmesg.log <path_on_your_computer>
All theses things needs to be done directly in twrp, adb is needed.
If you want to boot into system after decrypting it, you have to flash supersu, otherwise OOS will encrypt itself at next boot, causing a brick. Also try the modded version of twrp.
NevaX1 said:
This issue is really weird.
Can you share the logs given by TWRP, with the kernel log of your twrp recovery.
To do:
Code:
adb shell
dmesg > /tmp/dmesg.log
exit
adb pull /tmp/recovery.log <path_on_your_computer>
adb pull /tmp/dmesg.log <path_on_your_computer>
All theses things needs to be done directly in twrp, adb is needed.
Click to expand...
Click to collapse
Dear Sir,
Done it Immediately, thank you!!
ArisLi said:
Dear Sir,
Done it Immediately, thank you!!
Click to expand...
Click to collapse
I can't see any errors here, can you try to capture the log after you get the same error in your twrp.
NevaX1 said:
I can't see any errors here, can you try to capture the log after you get the same error in your twrp.
Click to expand...
Click to collapse
Sure, I believe it will happen during this weekend or on Monday.
aadityarulez said:
If you want to boot into system after decrypting it, you have to flash supersu, otherwise OOS will encrypt itself at next boot, causing a brick. Also try the modded version of twrp.
Click to expand...
Click to collapse
For more information: I didn't try to decrypt data before my oneplus3 return to China, I did decrypt it after it return form China, and I only flash freedom OS 1.6 with systemless SU t and stock (patch) kernel, than flash EX kernel, i believe both of them is patched, disable force decrypting.
My decrypt sequence: Unlock bootloader->fastboot format users data-> flash freedom1.6 with systemlessSU let it boot without configuration ->work fine for 3 days and brick after 4 days used with serval times of booting.(less then 5 times)
Every time before my oneplus3 get this type of in-system-used-brick, I see some root access issue or permission issue, that is V4A driver lost, I have no permission to move my files in media storage( for example, move some files from download folder to XpoasedInstaller folder), or Dolby atom crash....
The latest brick, I used my phone on bed for more than 2 hours with no issue, suddenly Dolby ATOM crash, unable to open it and V4a lost its driver, then I try to boot into TWRP to make a boot/system/data backup, but it fail to mount data and system partition.
Even on system-mode SU, It still happen two times of in system brick.
So now i set SELunx permission and do frequently TWRP and Ti-back, I believe It would brick again few days later. At least after many times of Try/error, I can confirm "format uesers data then I can use TWRP for system/data partition.
NevaX1 said:
I can't see any errors here, can you try to capture the log after you get the same error in your twrp.
Click to expand...
Click to collapse
It happen again while this morning I get up and updating two apps,
It freeze then reboot to recovery, unable to mount system/data again.
I have the latest nandroid data/system/boot backup last night, i believe it finally would be brick again.
Here is the log.
I will keep it in the state, please help, I won't "fastboot format usersdata" this time, till we know the cause, and have your instruction.
EDIT： upload the video, you can see it unable to boot in sysytm, in TWRP can't mount system/data/cache , unable to back/restore/install anything
https://youtu.be/KM4gX16sEHQ
What happened when you went completely stock?
aadityarulez said:
What happened when you went completely stock?
Click to expand...
Click to collapse
My friend test with completely stock/ bootloader lock for more one week in Chian (oneplus
service Centre in Shenzhen recoverey it ), every thing is fine just without google service.
Yesterday,I just re-flash freedom 1.6.1 on cleanest status, fastboot formate userdata-> TWRP format (without this both nandroid or new flas rom won't boot up)-- BOOT
After two days used, every things is fine, but just half hours ago my phone brick with all cache/system/data partition encryption while I am in system uesing , I will report detail at night while I have time, i believe I have found the root cause.
Follow this guide
http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-decryption-ultimate-guide-t3497940
Hello,
I am a happy owner of OnePlus 3 and at the beginning when I got this Smartphone and run it, I had to set-up a Pin which was also used for Encryption,
due to the decision that I wanted to change it, I have tried numerous things to do this, either via System -> Security, System -> Lock Screen or TWRP Recovery.
Then I have stumbled upon a wiping feature in TWRP. (TWRP Menu -> Wipe) where there was a couple of options like Advanced Wipe, Format Data and Swipe to Factory Reset. So I have
decided to see what Format Data does which showed me the following statement before I continued with it "Format Data will wipe all of your apps, backups, pictures, videos, media and
removes encryption on internal storage". Well when it said it removes the encryption I have proceeded because at this point where all of the methods failed I wanted to remove and
re-encrypt my OnePlus 3 again in order to change my encrypting pin. Ok, cool this worked perfectly except that now I can't restore my original rom or encrypt my OnePlus 3 again ....
Then I have flashed CyanogenMod 13 Nightly from August (The latest one on the CyanogenMod website) and when I went into System -> Security there was Encrypt button instead of saying
Encrypted at the top of the menu then I have played around with setting up a new Pin/Password and when I went throug all the process at the end the following happens within a few
seconds: a green dissasembled android shows then screen turns black and returns to lock screen. I checked if OnePlus 3 is encrypted and is not. This is not the normal as usually
encrypting takes some time.
Also, I have tried to restore my original rom which came with my smartphone and was encrypted, when I restored it, OnePlus 3 stucks on the first screen showing OnePlus logo on the
middle of the screen and text "Powered by Android" on the bottom of the screen.
I presume that CyanogenMod 13 encryption is broken or that I shouldn't have format Data ?
Is there any way that I can encrypt my smartphone again ?
P.S I know that OnePlus 3 encryption is handled by Hardware.
You can try downloading the official OxygenOS ROM, flashing it and trying to encrypt again. Last I tried doing it on Sultan's CM13, it didn't work, so it might be a CM problem.
As per my knowledge, if you flash stock OxygenOS rom and also be on stock oneplus recovery. Performing a Factory Reset will automatically encrypt your device again. But you must be on stock recovery + stock kernel + stock rom in order for it to work.
abhibnl said:
As per my knowledge, if you flash stock OxygenOS rom and also be on stock oneplus recovery. Performing a Factory Reset will automatically encrypt your device again. But you must be on stock recovery + stock kernel + stock rom in order for it to work.
Click to expand...
Click to collapse
Why do I need to be on stock recovery ?
Won't TWRP work just fine ?
formating data with TWRP -28 will decrypt your phone, it's madethis way so it can work on beta 9 and f2fs ...
that said i had encrypted device before on CM
so if you're not using beta 9 and your data partition is not f2fs, you can have an ecrypted device, the easiest way is to sideload official rom 3.2.8 (make sure you're on stock recovery and start adb sideload from there) , after the sideload the phone will be encrypted, if you're staying at MM, fastboot TWRP .22 or 23 or just the official in case .28 decrypts the phone.
Gliop022 said:
Why do I need to be on stock recovery ?
Won't TWRP work just fine ?
Click to expand...
Click to collapse
Well man i want you be on as much safe side as possible. When you perform factory data reset on stock recovery, it will wipe and reformat your internal memory as well. TWRP only wipes data partition, and you need to format whole internal memory manually. But stock is recommended for full compatibility.
Ok, I have finally re-encrypted my smartphone.
So for the future people who have the same problem as I have, do the following:
SIDE NOTE: You don't need to unroot anything, just re-flash original Oxygen OS and go forwards from there
1) Download Oxygen OS from official website (downloads.oneplus.net)
2) Copy it over to internal storage
3) Enter Recovery Mode => Volume Down + Power Button
4) Flash downloaded .zip file via Recovery Mode (SIDE NOTE: The flashing progress might look like it have a loop but it takes a little bit of time to flash it, more than CyanogenMod anyway).
5) Now, after you have flashed the system .zip file and rebooted your smarpthone, it will take some time to load so don't panic that you have stuck in bootloop as it again, takes some time to load the first time.
SIDE NOTE: My suspicions are that it takes some time to flash and run the first time because it needs to set-up some encryption parameters or something like that but I might be wrong.
6) Then when you finally get to the wizard screen and go through the initial setup like wi-fi, sim card etc, the system will ask you if you want to protect device before it turns on, you choose yes and type your PIN or Password. After that step your smartphone is successfully encrypted again, enjoy !
Gliop022 said:
Ok, I have finally re-encrypted my smartphone.
So for the future people who have the same problem as I have, do the following:
SIDE NOTE: You don't need to unroot anything, just re-flash original Oxygen OS and go forwards from there
1) Download Oxygen OS from official website (downloads.oneplus.net)
2) Copy it over to internal storage
3) Enter Recovery Mode => Volume Down + Power Button
4) Flash downloaded .zip file via Recovery Mode (SIDE NOTE: The flashing progress might look like it have a loop but it takes a little bit of time to flash it, more than CyanogenMod anyway).
5) Now, after you have flashed the system .zip file and rebooted your smarpthone, it will take some time to load so don't panic that you have stuck in bootloop as it again, takes some time to load the first time.
SIDE NOTE: My suspicions are that it takes some time to flash and run the first time because it needs to set-up some encryption parameters or something like that but I might be wrong.
6) Then when you finally get to the wizard screen and go through the initial setup like wi-fi, sim card etc, the system will ask you if you want to protect device before it turns on, you choose yes and type your PIN or Password. After that step your smartphone is successfully encrypted again, enjoy !
Click to expand...
Click to collapse
Hello Gliop022,
Do you know if flashing OxygenOs stock from TWRP 3.1.0 encrypts the phone or do I have to be on stock recovery?
Then once the phone is encrypted, are you able to flash an OOS based ROM (e.g. FreedomOs) and keep the encryption?
Hi.
Apologies if this is a very naive question, I am not particularly familiar with mods, roms and so forth.
I have rooted another phone in the past, but that is all.
The situation:
- Samsung Galaxy Nexus
- Not rooted/unlocked. Stock android automatically updated to the latest Android version supported
- Android developer option NOT set in settings
- Stuck in a boot loop: boots to android and then after a few seconds reboots, so no time to do anything
- Not sure how it happened, I had it for years, it was in my pocket and suddenly started doing that.
- Android fastboot and recovery loads up no problem
- I have tried anything I could find online to fix it: deleted cache, rebooted in safe mode, removed battery for 10 hours
- Nothing seems to fix it, it keeps rebooting
- I want to try a factory reset, but my family photos are in the phone
- Google synch seems to have stopped functioning for this device a year ago, all my 2016-17 photos and videos are locked in the phone.
Admitting there is nothing to do about the loop problem:
Is there any way I can copy photos and videos via usb while in recovery mode?
After I will reset the phone via recovery menu, hoping it will fix it. IF that does not fix it, I will flash another rom in. But I really do not want to wipe my data before backing them up.
I am assuming the answer is no, you cannot access the internal memory in fastboot/recovery unless your phone is rooted.
But I would like an expert opinion before I resolve to wipe one year of photos and videos which I will regret losing.
@mcaldo DON'T DO FACTORY RESET, EVERYTHING WILL BE LOST
which recovery are you using..?
if it's TWRP, then it's easy..
- boot into TWRP recovery
- go to "Mount" tab
- find "enable/disable MTP" button at lower options.. (enable it )
then connect your phone to that PC, where you always connected in past, ( to eliminate driver installation stage, all drivers will be preinstalled )
Regards
____Mdd said:
@mcaldo DON'T DO FACTORY RESET, EVERYTHING WILL BE LOST
which recovery are you using..?
if it's TWRP, then it's easy..
- boot into TWRP recovery
- go to "Mount" tab
- find "enable/disable MTP" button at lower options.. (enable it )
then connect your phone to that PC, where you always connected in past, ( to eliminate driver installation stage, all drivers will be preinstalled )
Regards
Click to expand...
Click to collapse
Thanks for your reply!
By recovery, I meant 'android system recovery'
It gives me the following options:
reboot system now
apply update from ADB
apply update from USB drive
wipe data/factory reset
wipe cache partition
Is any of the above useful?
Unfortunately, I do not have any alternative recovery software available
Edit: Googling I found this: "Apply update from ADB: The Android Debug Bridge allows you to plug your device into your PC and issue commands from there. "
If I can issue commands through ADB, perhaps there is a command to copy data from my phone to my computer?
mcaldo said:
Thanks for your reply!
By recovery, I meant 'android system recovery'
It gives me the following options:
reboot system now
apply update from ADB
apply update from USB drive
wipe data/factory reset
wipe cache partition
Is any of the above useful?
Unfortunately, I do not have any alternative recovery software available
Edit: Googling I found this: "Apply update from ADB: The Android Debug Bridge allows you to plug your device into your PC and issue commands from there. "
If I can issue commands through ADB, perhaps there is a command to copy data from my phone to my computer?
Click to expand...
Click to collapse
Yes, you can copy through adb commands..
Get and extract Minimal ADB and Fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
From PC, run CMD to extracted folder directory.
Connect phone to PC, go to update from ADB(in recovery),
Type "adb device" , it will show serial number and connected..
Then "adb pull /sdcard " (if you know particular directory of data then write it like /sdcard/photos,, otherwise writing /sdcard will copy all folders from your phone. )
it will start copying to same adb folder ..
____Mdd said:
Yes, you can copy through adb commands..
Get and extract Minimal ADB and Fastboot from here: https://forum.xda-developers.com/showthread.php?t=2317790
From PC, run CMD to extracted folder directory.
Connect phone to PC, go to update from ADB(in recovery),
Type "adb device" , it will show serial number and connected..
Then "adb pull /sdcard " (if you know particular directory of data then write it like /sdcard/photos,, otherwise writing /sdcard will copy all folders from your phone. )
it will start copying to same adb folder ..
Click to expand...
Click to collapse
Thanks for the advice.
I followed the instructions closely, and nearly got there.
adb devices returns
#serialnumber sideload
so all good
but adb pull /sdcard returns
adb: error connect failed: closed
I tried several other commands with no success
kill-server and start-server work fine but do not solve the problem
adb usb returns
error closed
So, I am starting thinking that the problem is in the bootloader being locked.
However, if I unlock it, it will be wipe all my data, I understand?
Googling about it, I found this:
The behavior is status-by-design. Your stock recovery is not designed to grant shell access. Your only choice here is to somehow manage to flash a custom recovery. – Firelord Dec 30 '15 at 14:19
3
To achieve something similar to what @FireLord suggested: TWRP can be booted on many devices without being installed. For that, find a matching image, then boot to the bootloader and run fastboot boot twrp.img. Btw: you can check with fastboot devices resp. adb devices whether a device is visible to the corresponding tool. – Izzy♦ Jul 8 '16 at 19:40
So I understand one could boot TWRP without installing it, but I am not sure if that means I could do that with the bootloader locked?
I found WugFresh nexus root toolkit which seems to do that, among many other things, but again it warns that the phone must be unlocked (using the android build "Android *.* Any", I did not know what else to choose, not sure if that makes any difference as for locked/unlocked requirements)
EDIT: my fastboot screen reads "FASTBOOT STATUS - Failbootloader locked" as the last line, when trying to run TWRP without installing.
Yes, unlocking bootloader will wipe everything..
What actually you did ? Why it went into bootloop ???
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex.
____Mdd said:
Yes, unlocking bootloader will wipe everything..
What actually you did ? Why it went into bootloop ???
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex.
Click to expand...
Click to collapse
What actually you did ? Why it went into bootloop ???
Click to expand...
Click to collapse
A very good question, to which I have no answer, unfortunately.
The phone was used by my wife for 2 years and then by me for other 2. I recently changed the battery.
Never rooted or unlocked. No unusual apps installed. I am a very basic user, as you might have guessed, and being my only phone at the moment, I really would not risk experimenting with it.
It went very slow over the last 4 months, so I was planning to reset it.
I put in my coat pocket for a few hours, when I took it out it had a train ticked stuck to the screen and was quite warm and on the lock screen. It froze, so I took the battery out and restarted it. From then on it is stuck in a loop, not sure why really.
I have also read that about boot into TWRP without installing.. and it worked for many one without unlocking bootloader... Don't know why not on GNex
Click to expand...
Click to collapse
That's good to know. I'll research more than.
It seems there might be a problem with the fastboot drivers on my computer, even selecting them from device manager did not work. Win7 refuses to install. The ADB drivers in theory work fine though.
If you have done nothing modification to system, then wiping data should work, but i have doubt if it also wipes personal data too, on TWRP it wipes data excepting /data/media/ which contains all personal data.. but don't know about wiping on stock recovery...
I hope you will find solution as soon as possible..
Regards.
PS. I can install stock recovery and try wiping /data.. and check what things get wiped.. but i need little time for that experiment...
____Mdd said:
If you have done nothing modification to system, then wiping data should work, but i have doubt if it also wipes personal data too, on TWRP it wipes data excepting /data/media/ which contains all personal data.. but don't know about wiping on stock recovery...
I hope you will find solution as soon as possible..
Regards.
PS. I can install stock recovery and try wiping /data.. and check what things get wiped.. but i need little time for that experiment...
Click to expand...
Click to collapse
Thanks so much.
Looking at google's documentation on the nexus:
You can remove data from your Pixel phone or Nexus device by resetting it to factory settings. Resetting to factory settings is also known as formatting the device or doing a "hard reset".
If you're factory resetting your device to fix an issue, make sure that you've tried all other troubleshooting options first. Find out how to troubleshoot your issue.
Important: Performing a factory reset will erase all data from the device.
Click to expand...
Click to collapse
It would seem that indeed all data will be removed.
This point, I will research a bit more into drivers, in case that is what it's preventing adb pull from working.
I really need a working phone, so if that fails I will hard reset, then unlock, root, flash in an alternative bootloader and perhaps a rom, and put ubuntu touch in dual boot. That will hopefully prevent me from loosing data in the future.
Sorry, this is out of topic to my question, but, , could you suggest any stable, solid rom for the nexus?
I read good things of CM12, and I ran into one which seemed to do to quite well with split windows, but I do not remember the name right now.
EDIT: I remember the name of the rom now, it's https://omnirom.org/about/
A last question if you can..
I tried to solve my boot loop problem by sideloading an update from google (maguro yakju yakju-jwr66y-factory-4cadea65.zip)
It loaded it fine but then failed because the installation it says it is not signed.
Basically, being a stock bootloader recovery from Samsung, it will only sideload OTAs from samsung, not the stock ones from google..
I cannot find the samsung ones anywhere, not for the nexus anyway, just the newer devices..
By any chance do you know where I could download proper Samsung OTA zip updates for the nexus?
Well, I talked with an android developer who confirmed that, unless you have a friend working in criminal forensic technology or similar, there is no way to get around a lock on this phone to pull data out.
So, sadly, I have wiped my phone by unlocking it, flashed TWRP and then omnirom with gapps.
My photos are gone, including a bunch of stuff my kid had made and asked me to photograph for safeeping. Very safe indeed
He kept asking me why they make the lock like that, instead of allowing some kind of password, perhaps he has a point.
So, it is quite unlikely that somebody who knows as little as I did will ever read this *before* finding themselves in the same situation.
But if you do, back up your data, unlock and flash TWRP, clockworks or some alternative, and thank yourself if and when disaster strikes..
@mcaldo wiping data/factory reset in STOCK RECOvERY will wipe everything... There is very few chances to get backup...
And yeah i found something interesting..
You can flash system.img.. only system files will be corrected not anything else..
Get appropriate zip from here : https://developers.google.com/android/images
Now take system.img to ADB/Fastboot folder ( i assume you know how it works )
Just go "Fastboot flash system system.img"
It will rewrite system partition..
Another one:
See downloads on this thread..
One says NON-WIPE, if you want me to try that zip, i will again require time for that. See here : https://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470
---------- Post added at 11:12 AM ---------- Previous post was at 11:09 AM ----------
I don't saw your reply, it was on next page.. its sad... Sorry i am late..
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
mkohan said:
Hi there,
I think I (soft? hard?) bricked my whyred today after trying to install Pixel Experience (Android 10). At this time, I'm left with a flashed PE Plus that is stuck at the Google logo animation (e.g. unable to access USB debug settings); stock MIUI recovery; and fastboot, which is not recognized by ADB as I haven't had a successful boot since I flashed PE, so I can't turn USB debug on. I think I've exhausted my options, but maybe someone has a smart solution.
For those who think they can help, let me describe in detail what I did:
0) I became a dev, turned USB debug on, installed Minimal ADB and Fastboot, latest Xiaomi drivers, moved flashable zips into internal storage etc.
1) I unlocked my bootloader through Mi Unlock.
2) I successfully flashed TWRP-3.3.1.0-whyred via ADB/Fastboot and rebooted. After getting back into MIUI, I booted into recovery, which was back to stock (MIUI seems to have overwritten my recovery). At that point (probably a big mistake) I gave up on flashing TWRP and went ahead to boot right into it via ADB instead, without flashing.
3) After a successful boot into TWRP 3.3.1.0, it asked me for a decryption password. Nothing worked, so I kept googling and found out that my version of android needs TWRP 3.3.1.1, which was not on the official TWRP website yet, to decrypt automatically. I booted into TWRP 3.3.1.1 via ADB (but didn't flash), made a backup of my stock ROM, did a wipe (art/dalvik cache, cache, data, system, vendor), flashed Pixel Experience and rebooted.
4) Bootloop, I was stuck on the Google loading animation for over 20 minutes, nothing happened.
5) I panicked.
6) I tried to flash TWRP 3.3.1.1 via ABD but my PC didn't recognize my phone - probably because, for lack of successful boots, I have not managed to turn on USB debug.
7) I tried to connect to Mi Assistant through stock recovery. It didn't recognize my phone, probably for the above reason.
8) I did a data wipe through stock recovery and rebooted, hoping for whatever issue kept PE from booting normally to get resolved.
9) I'm stuck on the same Google loading animation for over 40 minutes now, no progress.
Does any of you guys see a way out, or is this story over? To recap, I have: 1) PE Plus in bootloop, no access to dev settings, 2) stock MIUI recovery with options to reboot, wipe data or connect to Mi Assistant, 3) stock fastboot, 4) a backup of my previous system on internal storage, 5) ADB on my computer that doesn't recognize my phone - no USB debugging. I don't know where to turn. I don't care much about data, I have everything in the cloud, but I'd like to save the phone if possible.
Thanks a lot.
Click to expand...
Click to collapse
I'm new to this phone as well (but not to Android). Try the following:
Download TWRP from here -> https://androidfilehost.com/?fid=6006931924117884758
Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip from here -> https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
Power off phone. Hold down volume down and power button to boot into fastboot
Give the command fastboot flash recovery twrp-3.3.1-1-whyred.img to flash the recovery you downloaded earlier.
Boot into recovery
Flash Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip that you downloaded earlier
The above steps will at least ensure that you retain TWRP and it doesn't get overwritten by stock MIUI recovery
After that, check whether or not your phone/ROM has anti-rollback enabled and take appropriate steps accordingly.
Ok so i flashed PE 10 plus today and was met with the same problem.
Heres how i solved it
Goto fastboot option by pressing volume down and power button
Connect to pc (If it doesnt recognize, reinstall Adb drivers and phone drivers)
If it asks for decryption password just press cancel
Wipe data/internal/vendor (wont be able to wipe dalvik as it wont mount)
Flash PE 10 Plus and nothing else.
It should boot just fine.
However i run into bootloop if i flash latest magisk so i cant root my phone :/
Hope this helps
mkohan said:
Edit: Problem resolved - even though the connected device didn't show up in ADB on PC (adb devices came back empty), the phone was still responsive to fastboot reboot and fastboot flash recovery via PC, so I could flash TWRP 3.3.1.1 & clean flash PE. For anyone struggling with PE bootloops: make sure to 1) use TWRP 3.3.1.1 to flash, 2) do a dalvik/cache wipe after flashing the ROM and 3) not to install the TWRP app before the first successful boot - it was neglecting either 2) or 3) that caused my bootloop. The ROM itself is amazing!
Click to expand...
Click to collapse
hey read your post
actually adb and fastboot are two different things.
and recovery is flashed using fastboot commands not adb.
sometimes if a rom is not booting it may have issues with encryption.
Did standard unlock bootloader (went fine)
Moved a TWRP zip onto phone sd root directory (twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.zip)
adp fastboot boot twrp-3.4.0-0-guacamole-unified-Q-mauronofrio.img. (went fine)
But when I look for the zip file (or any system files) it does not show up , even in TWRP file manager.
Redid data wipe and it tells me "Failed to mount /system_root and /vendor
I am 99% sure that its just because these will not mount:
Does anyone have any idea what I can do to get these mounted to start a regular TWRP flash ?
Well I tried adjusting data format and ended up losing the Stock Rom.
And the stuff will still not mount.
UPDATE, rewiped data and got stock rom to load.
Now Data will load but vendor will not.
UPDATE : data and vendor will mount after data wipe. But still cannot see anything that is placed on device.
Such as the zip files I need to install.
UPDATE: now I sideloaded TWRP onto new phone, but now cannot get it to reboot into Rom.
Its odd after plugging it in , it went to a stock recovery even when TWRP was installed.
Found the issues, finally had to run MSM download tool and fix everything from there and start from scratch.
Ended up installing TWRP from fastboot flash recovery image.
Now to get root going on it and magisk.
What device do you have?
You're in the 7T forum but saying you used the 7 Pro twrp.
If you're using 7T, the reason why you don't see internal storage is because TWRP cannot decrypt on OOS (this is not because of a mounting error, this is simply due how oneplus has implemented their encryption).
And on 7T you don't need a zip of any sort to install twrp.
Reading the actual twrp thread would be a good start.
Lossyx said:
What device do you have?
You're in the 7T forum but saying you used the 7 Pro twrp.
If you're using 7T, the reason why you don't see internal storage is because TWRP cannot decrypt on OOS (this is not because of a mounting error, this is simply due how oneplus has implemented their encryption).
And on 7T you don't need a zip of any sort to install twrp.
Reading the actual twrp thread would be a good start.
Click to expand...
Click to collapse
Yes, I read though the threads, But got so bombarded with pages of stuff kind of lost track.
This is why I posted . Also it is a combined Christmas gift for my daughter that she cannot know I am working on. So I think I tried to rush it when she was in school.
Found out about the decryption part after I started the process. Then it was too late and ended up having to start over with tools.
It was a newb move to end up this far and try to rush it.
People did help me get back on track and now I am working on figuring out Magisk. (good help on magisk threads).
Thanks for your response.
eracet said:
Well I tried adjusting data format and ended up losing the Stock Rom.
And the stuff will still not mount.
UPDATE, rewiped data and got stock rom to load.
Now Data will load but vendor will not.
UPDATE : data and vendor will mount after data wipe. But still cannot see anything that is placed on device.
Such as the zip files I need to install.
UPDATE: now I sideloaded TWRP onto new phone, but now cannot get it to reboot into Rom.
Its odd after plugging it in , it went to a stock recovery even when TWRP was installed.
Found the issues, finally had to run MSM download tool and fix everything from there and start from scratch.
Ended up installing TWRP from fastboot flash recovery image.
Now to get root going on it and magisk.
Click to expand...
Click to collapse
Magisk IS your root