Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
azzurra01 said:
Hi,
From nothing my S4 mini stop working, but because i have some exp from old times i check if my computer recognize, and it appears Qualcomm HS-USB QDloader 9008 (After i install QUSB drivers). But the phone not enter in download mode or recovery mode, i tried many ways and look for all treads in the forum about that and nothing. Hope someone have any other idea.
Ps.: Already tried the card from debrick.img
Click to expand...
Click to collapse
Debrick image should bring it partially to life, how did you prepare for the sd card? Which debrick image did you use?
https://www.youtube.com/watch?v=91iQV5hm-Yw
this video above is my situation. when i go to download mode it redirects to lg logo.
i cant find a way that my pc detects my lg g4.
when i check in device manager there is no device either qualcom or qdloader
HELP ME PLEASE!
up
august28th330 said:
https://www.youtube.com/watch?v=91iQV5hm-Yw
this video above is my situation. when i go to download mode it redirects to lg logo.
i cant find a way that my pc detects my lg g4.
when i check in device manager there is no device either qualcom or qdloader
HELP ME PLEASE!
Click to expand...
Click to collapse
I have the same problem, i used Win32 to write system.img then "EMMC_ROM1_032G74_1803230737_00000000_20000000" on SD card to enter download mode but i get bootlooped after like 5sec i get in dw mode.
I used QFIL but it fails all the time.
Idk what else to try...
up
to acess QDLoader 9008 you need to short two pings in the motherboard
el.adnane said:
to acess QDLoader 9008 you need to short two pings in the motherboard
Click to expand...
Click to collapse
so i should open my lg g4? is it safe?
august28th330 said:
so i should open my lg g4? is it safe?
Click to expand...
Click to collapse
its already wasted so there is nothing wrong in trying but if u dont know let someone else do it
Accidentally bricked my Moto G5 XT1675.
I left my sister in charge to flash my Phone through fastboot on me since she also knows how to do that but she went into my Moto G3 instead of the Moto G% folder and flashed the Moto G3 gpt.bin which has messed up my Moto G5 partition layout.
when inserted through USB I get QDLoader 9008.
anyone figured out how to get out of this even a tiny bit?
No, there's no way to solve this yet until Motorola leaks the blankflash files for this specific device. Consider your device dead.
Shooting Star Max said:
No, there's no way to solve this yet until Motorola leaks the blankflash files for this specific device. Consider your device dead.
Click to expand...
Click to collapse
Do you know if anyone has tried making a loader.img
flashing the loader.img to sd card and booting phone from that?
I've seen other snapdragon devices able to boot from sd card when they had the QDLoader 9008 error
Livi-Tech said:
Do you know if anyone has tried making a loader.img
flashing the loader.img to sd card and booting phone from that?
I've seen other snapdragon devices able to boot from sd card when they had the QDLoader 9008 error
Click to expand...
Click to collapse
Someone dumped a loader.img file in one thread (I can't remember which one exactly). I tried to use it with different SD cards I have lying around, but the device would only blink the notification light. I don't know if the Cedric can actually boot from an SD*card, or if Loader.img has to match with the latest bootloader version installed before you killed your device.
Shooting Star Max said:
Someone dumped a loader.img file in one thread (I can't remember which one exactly). I tried to use it with different SD cards I have lying around, but the device would only blink the notification light. I don't know if the Cedric can actually boot from an SD*card, or if Loader.img has to match with the latest bootloader version installed before you killed your device.
Click to expand...
Click to collapse
My mum's bootloader is same as the one that is or was on my phone
I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Solved: Use the first blank flash from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
mookiexl said:
I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Click to expand...
Click to collapse
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
mookiexl said:
Solved: Use the first blank flash to from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
Click to expand...
Click to collapse
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Technical said:
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Click to expand...
Click to collapse
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
Before connecting the phone, start the blankflash program. Maybe you have to repeat it a couple of times. Also try different cables, ports and computers.
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
mookiexl said:
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Click to expand...
Click to collapse
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
LØNEWØLF said:
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
Click to expand...
Click to collapse
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go: https://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0! ???
Dany XP said:
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go:
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0!
Click to expand...
Click to collapse
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
LØNEWØLF said:
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
Click to expand...
Click to collapse
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Dany XP said:
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Click to expand...
Click to collapse
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
LØNEWØLF said:
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
Click to expand...
Click to collapse
Uh...good question
Hi guys i have a big problem my phone is only led flashing when i connect usb my pc detect Qualcom HS QLoader 9008 i have a SD Card with 64gb but i dont know how to power on the phone, when i use blank flash my phone is detected how Unknown
xxl30xx said:
Hi guys i have a big problem my phone is only led flashing when i connect usb my pc detect Qualcom HS QLoader 9008 i have a SD Card with 64gb but i dont know how to power on the phone, when i use blank flash my phone is detected how Unknown
Click to expand...
Click to collapse
Follow the guide
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
TheFixItMan said:
Follow the guide
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
Click to expand...
Click to collapse
Thx for the answer i already tried but only can flash 2 gbs in my sd 64 gb, i have other with 32 gb but only flash 29