I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Solved: Use the first blank flash from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
mookiexl said:
I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Click to expand...
Click to collapse
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
mookiexl said:
Solved: Use the first blank flash to from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
Click to expand...
Click to collapse
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Technical said:
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Click to expand...
Click to collapse
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
Before connecting the phone, start the blankflash program. Maybe you have to repeat it a couple of times. Also try different cables, ports and computers.
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
mookiexl said:
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Click to expand...
Click to collapse
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
LØNEWØLF said:
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
Click to expand...
Click to collapse
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go: https://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0! ???
Dany XP said:
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go:
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0!
Click to expand...
Click to collapse
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
LØNEWØLF said:
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
Click to expand...
Click to collapse
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Dany XP said:
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Click to expand...
Click to collapse
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
LØNEWØLF said:
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
Click to expand...
Click to collapse
Uh...good question
Related
Hello everyone.
I need your help.
My Device: LG G3 D855 32GB
The device does not turn on, the only thing that appears is because when I connect the device to a PC, I see a driver installed:
RELINK HS-USB QDLoader 9008
I read guides on site here, and I'm trying to order
I downloaded the software BoardDiag 2.9
I downloaded the files to the appropriate TOT
I extracted the files by instructors on site.
I opened the program and I followed the guide and it seems to me an error
Download mode is enabled Mode,
I quickly disconnects from the computer and reconnect the computer and then the moment I am unable to do a test and the results are:
AP CHECK START = PASS
EMMC TEST START
FAILED TO OPEN PARTITION FROM EMMC
TEST ABORTED !!
I tried a lot of tutorials but I can not, it always seems the device is in Download Mode
What can I do more?
Please your help,
Eliran
If you go that way, you will need bunch of other stuff. Here is the link
http://open-freax.fr/guide-unbrick-your-lg-g3/
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
The phone fell
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the comment
The phone fell into the vehicle.
I know the phone is always in Download Mode
The software does not let me do anything and making phone download mode
I did not try to install KDZ.
And I can not open a setup KDZ because the device does not rise and there is no open port.
I only have the port I did above.
Thanks for the help, I worked in the guide and I could not ...
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran
I need help please. What can i do
zarfati66 said:
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran
Click to expand...
Click to collapse
I need help please. What can i do
The phone woke for a moment ...
zarfati66 said:
I need help please. What can i do
Click to expand...
Click to collapse
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran
relink hs-USB Qdloader 9008
ZARFATI6 said:
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran
Click to expand...
Click to collapse
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????
apur32 said:
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????
Click to expand...
Click to collapse
Same situation too, solutions yet?
Hey I have the same problem .
If any of you found the solution please post it here or pm me, I am stuck
I was trying to go back to stock os from cm11 on the Amazon fire phone. Downloaded a stock rom and tried to install using safestrap.
After I pressed reboot the phone turned off but didn't turn back on. It's not responding to anything , not even goes into recovery , but when I connect it to computer by cable , six partitions show up , five of which it says are in need of format , and one contains a folder named image , which has a lot of files.
I'm new to this , got cm by following a simple guide , help pls
Hi to you all!
I have exactly the same issue.
If I connect the Fire Phone to the Pc there are six partitions that show up. So ADB sideload is not possible any more. Ialready disconected the battery- did not work out
Does any of you have any idea?
Thanks
How come no one answered to this issue since 2016
Good day everyone,
I wonder why this issue was not replied to since 2016 on a professional forum. Is it because its not fixable?
I just bought an Amazon Fire Phone 64GB, the AT&T version. I already knew the phone was a complete disaster, but I still bought due to my low budget. Its the SnapDragon 800 series processor which I considered for such a small budget phone. Anyways, I rooted it via KingRoot, installed Safestrap-Kodiak-4.0.1-B01. I then downloaded the Unlocked version of the Fire phone Fireware "update-kindle-35.4.6.6_user_466000820" (since I wanted to avoid AT&T bloatware. I reside outside the States so cant use AT&T, so no use keeping it running all the time and sacrifice my battery) and flashed that. It flashed alright but got stuck after the welcome screen after selecting English (United Sates or UK). I then thought of of reverting it back to its original state Fire OS Ver 3.5, so downloaded "update-fire-phone-121_1.0.1_user_101012120" and now it has no life what so ever. Now it in the same state as mentioned by 2 others on this thread. It shows total 6 partitions with only 1 partition with an "Image" named Dir and a few files around 53MB or so residing in it.
I have snapshots of the Image folder files and the "QHSUSB_Bulk" status shown in Device manager, but I cant seem to find an option here to attach my jpg's here. Gosh! It doesnt get dumber than this.
Requesting help from someone who can help me out with anything at all, links, text, vdo's.
I've already downloaded the following files, but dont have a clue what to do with any one of them
QPST.2.7.460
Qualcomm_Flash_Image_Loader_v1.0.0.3
SRKtool_2.1_droidth
Qualcomm HS-USB QDLoader 9008 Driver Qualcomm HS-USB QDLoader 9008 Driver2.1.0.4
Qualcomm HS-USB QDLoader 9008 Driver Ver8.5
Have you tried going into adb sideload, installing adb drivers and sideloading the stock rom?
Now deleted the 29 partitions of the phone.
After experimenting with it, i deleted the 29 partitions of the phone, now its not even showing Qualcomm eMMC USB Storage in device manager.:crying:. Is there anyone who can help me out here. I'd really be grateful.
No life in the phone except for QDLoader 9008 (COM4)
Android# said:
Have you tried going into adb sideload, installing adb drivers and sideloading the stock rom?
Click to expand...
Click to collapse
Its not powering up, going into stock recovery even so i cant get into sideload, if my understanding is correct.
SohailAzeem said:
Its not powering up, going into stock recovery even so i cant get into sideload, if my understanding is correct.
Click to expand...
Click to collapse
*****Sorry, just realized that you can't get into stock recovery anymore please disregard the following as obviously that would only help if you could enter recovery*****
I am sure you already tried but what i meant to say was if you tried power + volume up button, you end up in stock recovery and that's where you gotta go, and select "apply update from ADB" from the recovery menu.
But even before all this, first make a new folder on your desktop, then download the ADB drivers for windows from here: https://developer.android.com/studio/releases/platform-tools.html
Extract the ADB drivers into the new folder you just made. Now, go to https://www.amazon.com/gp/help/customer/display.html?nodeId=201607550 and download the 4.6.6.1 bin file for Amazon Fire Phone, either version will work with AT&T phone, and also put the bin file in the new folder you made earlier. Rename the bin file to just 'fire' or something short and easy. Now on an empty space in that folder press Shift + Right Click together, and select 'open command prompt or windows powershell from here' depending on your computer OS.
Now make sure your phone is powered off, then press power + volume up together to get into stock recovery, and you will see option "apply update from ADB", select that and when phone is ready, connect it to the computer via usb cable. In the command prompt window on the computer, type 'adb devices' and press enter. It should show the amazon phone in adb devices list. Next, type 'adb sideload fire.bin'. If you named the bin file something else make sure you replace 'fire' with that. It will take about 5-10 minutes and once done it should be able to boot normally. You can use kingroot 4.1 and then replace the kinguser with SuperSU using the supersume app. You can download supersume app by searching online or from google appstore, either one works. Hope this helps.
SohailAzeem said:
After experimenting with it, i deleted the 29 partitions of the phone, now its not even showing Qualcomm eMMC USB Storage in device manager.:crying:. Is there anyone who can help me out here. I'd really be grateful.
Click to expand...
Click to collapse
No you bricked it good and proper now.
I have bricked 3 now
It seems while you still have QDLoader 9008 showing up the device is repairable and any Official repairer would be able to restore the phone easily with the correct software and recovery firmware package.
I was in this exact same situation and was unable to get out of this mode even after using "dd" to send the stock recovery and my backed up .img's
Once you Kill the phone in this mode (As I did) it's un fixable and Amazon will send you a new or replacement phone if it still has any manufacture warranty time left.
They will be unable to prove you tampered with it since they cant revive them :laugh:
Just tell them it bricked during a adb side load of the official firmware.
bigrammy said:
No you bricked it good and proper now.
I have bricked 3 now
It seems while you still have QDLoader 9008 showing up the device is repairable and any Official repairer would be able to restore the phone easily with the correct software and recovery firmware package.
I was in this exact same situation and was unable to get out of this mode even after using "dd" to send the stock recovery and my backed up .img's
Once you Kill the phone in this mode (As I did) it's un fixable and Amazon will send you a new or replacement phone if it still has any manufacture warranty time left.
They will be unable to prove you tampered with it since they cant revive them :laugh:
Just tell them it bricked during a adb side load of the official firmware.
Click to expand...
Click to collapse
Wow! That very sad. That was a new phone. Didnt even have a chance to use it. I thought android phones were unbrickable. What brands give away there firmware to be flashed, or in other words Phones which are unbrickable.
SohailAzeem said:
Wow! That very sad. That was a new phone. Didnt even have a chance to use it. I thought android phones were unbrickable. What brands give away there firmware to be flashed, or in other words Phones which are unbrickable.
Click to expand...
Click to collapse
If your able just return the phone as said then they will likely send you a replacement or refund. :good:
Nearly all phones are brickable if you try hard enough but this fire phone is very very easy to brick :laugh:
(In My Opinion only) If you want a cheap almost unbrickable phone then go with the cheap china brands using the MediaTek CPU's. Stay away from the flag ship brands like sony htc lg samsung which use MediaTek CPU's as these manufacturers locked their devices down by removing the MediaTek flashing method and installing their own.
SPFlashTool is the PC software and the Swiss Army knife used for MediaTek so ensure you research :good:
Team MAD (MediaTek Android Developers) Have quite a few devices they support so choose any of those depending on your budget and it will ensure you get some decent updates and running the Latest Android Version. :good:
Do your research by reading the associated threads before you choose.
https://github.com/MediatekAndroidDevelopers
i think you don't read carefully what the Problem is.
Hi to you all!
I have exactly the same issue.
If I connect the Fire Phone to the Pc there are six partitions that show up. So ADB sideload is not possible any more. The Phone is not working not getting ON. The phone is in Dead Condition but if you Connect with PC it shows its Memory Partations. if any phone not getting ON than how can enter to ADB Mode...???
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
George_Samy said:
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
Click to expand...
Click to collapse
Carefully read it can help you with https://forum.xda-developers.com/de...n-restarts-continuously-t3548182#post71073715
My case is almost the same, but mine isn't detected for Windows (neither adb nor loader).
I had disconnected the battery, but without any results.
Any idea?
Clamp all 3 buttons and hold 1 minute. What happens?
vuk1963 said:
Clamp all 3 buttons and hold 1 minute. What happens?
Click to expand...
Click to collapse
n
Unfortunately, nothing
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the task manager on the computer to choose the interface adb to install the driver, specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY
vuk1963 said:
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
All started when the phone isn't capable to install the official update to 6.0.
I decided to try other ROM's, opening the boot loader and installing the TWRP recovery. All goes well, but the ROM that are working better (Tomal - Discovery 2.00) had problems with my LTE networks.
Reading one of your post, I started to try to install the official 6.0, but I forgot to wipe the system before relock the bootloader.
After trying flash different RUU files through fastboot I used one from easy firmware: (0PFJIMG_A51_UL_K44_DESIRE_SENSE60_Orange_ES_1.28.75.5_Radio_01.01.010_U10305041_08.01.41222_2__combined_signed.zip) that belong to my CID (Orange Spain)
Then the phone don't respond to anything...
I will uninstall all drivers and programs and restart according your instructions...
Click to expand...
Click to collapse
vuk1963 said:
lcarrasc said:
Yes, sadly, you need to restore the bootloader,and it's very difficult to do it yourself http://4pda.ru/forum/index.php?showtopic=643084&st=7060
Click to expand...
Click to collapse
Thanks. I understand that my phone is lost
I tried to use QFIL (romkingz.net/2016/07/how-to-use-qualcomm-flash-image-loader) but the computer hasn't recognised the phone...
Click to expand...
Click to collapse
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
lcarrasc said:
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
Click to expand...
Click to collapse
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
vuk1963 said:
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
Click to expand...
Click to collapse
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
lcarrasc said:
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
Click to expand...
Click to collapse
I also run Windows 10 х86 and in Device Manager has a ports (COM and LРТ)
What it's expected to find in the com ports?
lcarrasc said:
What it's expected to find in the com ports?
Click to expand...
Click to collapse
Something like: Qualcomm HS-USB QDLoader 9008 port com
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
lcarrasc said:
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
Click to expand...
Click to collapse
Clamp all 3 buttons and hold 1 minute,and try different variants combinations with holding the volume buttons + and - and the power button,with the connection of the phone to the computer and to the power unit
I tried all possible combinations of buttons, and nothing...
Any idea?
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Have the same issue - were you able to figure out how to fix it?
The only way to fix it would be to have a copy of the ROM that can be flashed in EDL mode, which is the mode your device is in. Google doesn't make EDL-flashable copies of its ROMs available - not a surprise - since that mode is mainly for tech support personnel. I'm afraid your only recourse is to contact Google and see what they can do for you.
freshmike said:
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Click to expand...
Click to collapse
Phone should still be covered under manufacturer's warranty if anything call it in see you at the phone shut off and did that and they'll replace it
@freshmike what did you do to get to this state?
davidcie said:
@freshmike what did you do to get to this state?
Click to expand...
Click to collapse
No idea, not mine got it from a friend to try to fix. I think the memory is grilled. On the other hand there are so many complains regarding the quality of Pixel phones, I would not want one even as a gift
try it !
tell me where they are and i used universal adb and fastboot drivers when I went to unlock bootloader adb was working pretty well with the drivers however fastboot wasn't cuz it didn't show my device in fastboot device even if it was plugged to the pc
Attached
mr.onegin said:
Attached
Click to expand...
Click to collapse
but is it really safe i dont want my pc destroyed
succaBYLTA said:
but is it really safe i dont want my pc destroyed
Click to expand...
Click to collapse
Drivers are safe but flashing or unblocking anything never was
Actually there is a thread on XDA all ready official-tool-windows-adb-fastboot-and-drivers-15-seconds-adb-installer but drivers I presented are from another forum exactly for this device.
mr.onegin said:
Drivers are safe but flashing or unblocking anything never was
Actually there is a thread on XDA all ready official-tool-windows-adb-fastboot-and-drivers-15-seconds-adb-installer but drivers I presented are from another forum exactly for this device.
Click to expand...
Click to collapse
Well also is QDLoader setup 64-bit safe cuz when i opened QDloader setup for 64-bit It opened alot of cmds and that was sus for me so is It safe
mr.onegin said:
Drivers are safe but flashing or unblocking anything never was
Actually there is a thread on XDA all ready official-tool-windows-adb-fastboot-and-drivers-15-seconds-adb-installer but drivers I presented are from another forum exactly for this device.
Click to expand...
Click to collapse
And also What does QDLoader even does? I AM pretty New to this
succaBYLTA said:
And also What does QDLoader even does? I AM pretty New to this
Click to expand...
Click to collapse
First Google result...
QDLoader
This package (Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip) contains Qualcomm HS-USB QDLoader 9008 Drivers for Windows 10/7/8/8.1 64-Bit OS. This Qualcomm QDLoader Driver helps in detecting the device when it is connected to PC in EDL Mode or Download Mode.
This Qualcomm HS-USB Driver package is for 64-bit OS, you can download the 32-bit version of the driver here. If you would like to install the drivers manually, download these Qualcomm Drivers.
I installed all of them but still I cannot flash anything from fastboot. What can I do?