Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Have the same issue - were you able to figure out how to fix it?
The only way to fix it would be to have a copy of the ROM that can be flashed in EDL mode, which is the mode your device is in. Google doesn't make EDL-flashable copies of its ROMs available - not a surprise - since that mode is mainly for tech support personnel. I'm afraid your only recourse is to contact Google and see what they can do for you.
freshmike said:
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Click to expand...
Click to collapse
Phone should still be covered under manufacturer's warranty if anything call it in see you at the phone shut off and did that and they'll replace it
@freshmike what did you do to get to this state?
davidcie said:
@freshmike what did you do to get to this state?
Click to expand...
Click to collapse
No idea, not mine got it from a friend to try to fix. I think the memory is grilled. On the other hand there are so many complains regarding the quality of Pixel phones, I would not want one even as a gift
try it !
Related
Hello everyone.
I need your help.
My Device: LG G3 D855 32GB
The device does not turn on, the only thing that appears is because when I connect the device to a PC, I see a driver installed:
RELINK HS-USB QDLoader 9008
I read guides on site here, and I'm trying to order
I downloaded the software BoardDiag 2.9
I downloaded the files to the appropriate TOT
I extracted the files by instructors on site.
I opened the program and I followed the guide and it seems to me an error
Download mode is enabled Mode,
I quickly disconnects from the computer and reconnect the computer and then the moment I am unable to do a test and the results are:
AP CHECK START = PASS
EMMC TEST START
FAILED TO OPEN PARTITION FROM EMMC
TEST ABORTED !!
I tried a lot of tutorials but I can not, it always seems the device is in Download Mode
What can I do more?
Please your help,
Eliran
If you go that way, you will need bunch of other stuff. Here is the link
http://open-freax.fr/guide-unbrick-your-lg-g3/
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
The phone fell
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the comment
The phone fell into the vehicle.
I know the phone is always in Download Mode
The software does not let me do anything and making phone download mode
I did not try to install KDZ.
And I can not open a setup KDZ because the device does not rise and there is no open port.
I only have the port I did above.
Thanks for the help, I worked in the guide and I could not ...
Navuhodonosor said:
If you go that way, you will need bunch of other stuff. Here is the link
It is a good thing that your PC recognises phone like that.
But first be sure that You can not enter download mode or recovery or even fastboot.
And please say what did you do to make it like that? Wrong flash?
If you CAN enter download mode than you can flash kdz or tot files from there. Easiest way is to use LGUP but you must be careful if you want to try.
Click to expand...
Click to collapse
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran
I need help please. What can i do
zarfati66 said:
Thanks for the help, I worked in the guide and I could not ...
I went through all the steps I found at:
Now, let’s get the party started
I set up the software the guide and I got an error:
FAIL on the EMMC test
I changed the parameter Read / Write »to« Erase
And again I got the error:
FAIL on the EMMC test
Then I try again, click Start, open a window and write in English and Chinese
Device DLOAD mode
device was not found in dload trying flash peogrammer
I click OK, the window closes and then when I press Start again, the window reappears.
Only when I disconnect the USB cable from the computer and the author briefly again then I’m able to do the test, but he failed.
FAIL on the EMMC test
The device always is in Download Mode and appears port:
RELINK HS-USB QDLoader 9008
My component can not be right at all and it always is in Download Mode?
I did not do short the guide, because the computer also detected me.
It has always seemed stuck in a download mode.
There is another option? Short elsewhere as will enable progress?
Thank you very much for your help,
Eliran
Click to expand...
Click to collapse
I need help please. What can i do
The phone woke for a moment ...
zarfati66 said:
I need help please. What can i do
Click to expand...
Click to collapse
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran
relink hs-USB Qdloader 9008
ZARFATI6 said:
Hello everyone
Today I tried again to connect the device to your computer, the screen comes on suddenly.
And see the state of battery with a question mark inside a yellow triangle.
I did not realize also saw installed driver
LGE AndroidNet USB Serial Port
I tried to re-install.
Now again became a black screen and the next thing happens:
When the device without a battery connected to a computer costing me
RELINK HS-USB QDLoader 9008
When I'm with a battery, it registers an unknown device.
When the device without a battery test again tried to do this EMMC component fails.
help please
Eliran
Click to expand...
Click to collapse
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????
apur32 said:
I am exactly in the same situation. Have you found any solution so far???? My phone suddenly stopped working and didn't boot up at all first and then I used the LG Flashtool to install original TOT file and all went well. I forgot to close LG Flashtool and it started flashing again. LG Flash tool restarts the phone at about 80% and then it failed at that point and since then I am having this issue.................
Any solution???????
Click to expand...
Click to collapse
Same situation too, solutions yet?
Hey I have the same problem .
If any of you found the solution please post it here or pm me, I am stuck
I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Solved: Use the first blank flash from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
mookiexl said:
I attempted to flash Dirty Unicorn from they're site, which appeared to go well, then I proceeded to flash the TWRPinstaller.zip that was suggested from the maintainer for our device. when I tried to reboot from recovery I got a no OS message. I ignored the message and attempted to reboot. Now the phone doesn't normally power on or off(which may change once the battery dies), no boot animation, no recovery, no fastboot recognition. The computer recognizes the phone as Qualcomm HS-USB QDLoader 9008. I googled for hours last night trying to fix to no avail. Has any of our great devs found a way to atleast recover the bootloader screen. I think I can handle it myself from there with adb.
Click to expand...
Click to collapse
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
mookiexl said:
Solved: Use the first blank flash to from the link to get back to bootloader screenhttps://firmware.center/firmware/Motorola/Moto%20Z2%20Force/Blankflash/
From bootloaderscreen put your ADB skills to work. I'm not too good with guides but this just saved me $175
Click to expand...
Click to collapse
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Technical said:
I did the same, got the same. Can't confirm the Qualcomm HS-USB QDLoader 9008 device will be there.
No charge, no screen, does not turn on/off, no vibration. Worst: no bootloader... Again, could be different if the battery dies.
Three questions:
1. File there is NDX26.183-15_17. Is it the same for OPXS27.109-34-10 on which I'm now? I suppose I need to use the "Oreo" version (2nd file in the list).
2. Which tool/software did you use to flash it? Is there a step by step tutorial?
3. You say "from bootloader screen". What about if we do not have a bootloader screen but a black brick in our hands?
Click to expand...
Click to collapse
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
Before connecting the phone, start the blankflash program. Maybe you have to repeat it a couple of times. Also try different cables, ports and computers.
Dany XP said:
Can somebody help me? I am in the same situation.
T-Mobile, unlock bootloader, hard bricked (already recognized Qualcomm QDLoader 9008 in device manager at least...)
I tried to use the blankflash but...see attachment
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=77623934&postcount=5
mookiexl said:
Answers
1.NDX26.183-15_17 (All it does is get your boatloader screen back
2. If you go to the device menu on your computer and your phone reads as Qualcomm HS-USB QDLoader 9008, all you have to do is click on the Blank flash all file and from the extracted folder and command prompt will do the rest. If the device is not recognized QDLoader 9008 then you will need to download qualcomm drivers to your computer
3.That is exactly what the file is for. Getting your black brick to at least the bootloader screen. From there you can adb recovery or stock rom.
What I ended up doing was adb push the bootable TWRP from the this thread https://forum.xda-developers.com/z2-force/development/how-to-install-oreo-ota-t3726932.
Flash the TWRP the official for our device from they're site(the bootable TWRP will give you access to extsd and thats where I had the official TWRP )
Rebooted back to bootloader and adb the firmware files for my device from the AOISP thread and rebooted my phone and I was booting DU.
Click to expand...
Click to collapse
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
LØNEWØLF said:
Can somebody please help me, my laptop isn't even detecting my device as QDLoader 9008, can you please tell me which windows os version did you use, also did you use the usb cable came in the box and did you use usb 2.0 port or 3.0?
Click to expand...
Click to collapse
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go: https://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0! ???
Dany XP said:
Well, you need of course, Qualcomm loader driver, to at least having your device recognized as 9008. There u go:
After that, go ahead with blankall and stuff...
P.s. and yes ..stay away from USB 3.0!
Click to expand...
Click to collapse
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
LØNEWØLF said:
Thanks for the reply bro....but I have that driver installed...I installed before connecting it....still not detecting... I'm gonna try this once more in my friend's pc... let's see what happens
Click to expand...
Click to collapse
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Dany XP said:
I know it's a long shot but...do u have any other Qualcomm device to try?
U can enter EDL mode with adb command "adb reboot edl". Yes, it's that simple. ?
Click to expand...
Click to collapse
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
LØNEWØLF said:
OK I'll try...but how would I get back from edl to Normal without doing anything in the edl?
Click to expand...
Click to collapse
Uh...good question
After requesting repair at the official OnePlus Side, they told me to backup my phone(Stock OP 7T). When i connected it to my Windows PC it didnt appear in the Windows Explorer. After some scearching i could find it in the Device Manager under COM5 with the Name given in title. I am worried because when i googled Qualcom Diagnostics i saw that my device might be bricked or smth. But i didnt try to flash any new software or anything alike. i didnt charge my device for over a week so could theren be a connection with missing Power/Battery and this problem. Because my Screen is broken (Blackscreen) I cant see any info might given by the Phone itself. The only sign of functionalty is the detection by Windows.
Maybe someone has Tipps or a Solution for me
Trencosta said:
After requesting repair at the official OnePlus Side, they told me to backup my phone(Stock OP 7T). When i connected it to my Windows PC it didnt appear in the Windows Explorer. After some scearching i could find it in the Device Manager under COM5 with the Name given in title. I am worried because when i googled Qualcom Diagnostics i saw that my device might be bricked or smth. But i didnt try to flash any new software or anything alike. i didnt charge my device for over a week so could theren be a connection with missing Power/Battery and this problem. Because my Screen is broken (Blackscreen) I cant see any info might given by the Phone itself. The only sign of functionalty is the detection by Windows.
Maybe someone has Tipps or a Solution for me
Click to expand...
Click to collapse
If you connect your phone to pc while its off and holding the volume down button it will boot into Qualcomm recovery mode which is what you are seeing. I suggest you find a way to switch it off and boot it up again
Morning all,
My old Pixel 3 XL has developed the "wont boot, wont respond, no ADB" issue that i see was quite common on here a few years back.
From what i read there wasnt really much of a solution, barring getting the OEM boot files from Google, which I dont believe ever happened.
Whats the latest on this issue - has anyone fixed it?
Usual symptoms - Pixel 3 XL, cant hard reset, cant access boot loader, cant ADB (doesnt show device), shows as Qualcomm HS-USB QDLoader 9008 (COM3) when connected to windows...
Probably a lost cause, but this was a good phone - like to save it if I can
TIA,
C
Don't have a P3XL in front of me but looks like the device is stuck in EDL mode. If you can find the firehose files you can rebuild the firmware and get it back to a factory reset
cy80rg said:
Morning all,
My old Pixel 3 XL has developed the "wont boot, wont respond, no ADB" issue that i see was quite common on here a few years back.
From what i read there wasnt really much of a solution, barring getting the OEM boot files from Google, which I dont believe ever happened.
Whats the latest on this issue - has anyone fixed it?
Usual symptoms - Pixel 3 XL, cant hard reset, cant access boot loader, cant ADB (doesnt show device), shows as Qualcomm HS-USB QDLoader 9008 (COM3) when connected to windows...
Probably a lost cause, but this was a good phone - like to save it if I can
TIA,
C
Click to expand...
Click to collapse
If you look in this thread you'll find a lot more information, but sadly no solution.
Not to be a dork but you're asking a question, which should go in the 'questions' forum, instead of in the rom, kernels and other development. This isn't development of any kind.
cheers
Hello,
My device randomly shut down the other day and won't come back to life at all.
It doesn't go into fastboot or recovery mode, it just shows up in windows as Qualcomm HS-USB QDLoader 9008. From what I understand, this means the phone is in "EDL Mode"?
I have tried:
- Letting the battery completely drain and attempt to turn it on
- Using the recovery tools Google provides
- Using android platform tools to trigger fastboot/recovery
Nothing seems to be working at the moment. I am a bit noob-ish, so maybe there's a troubleshooting step I missed?
I'd like to get this device recovered. Has anyone run into this issue and solved it? Any advice is appreciated!
Thanks in advance!
Unfortunately there is no way to recover the device, as the software and files required are not publicly available. You could have it repaired but they will just replace the main board.