Related
I have got this weird problem with my Qtek 9090, I can’t hear a thing from the speaker except incoming calls??? And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
I tried with few other rom, but no success! I even tried with WM5
Could this have anything with the headset plug? Cuse when the headset is plugged (in normal case) you can only hear incoming calls from the phone!
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Guest said:
FFVIII said:
Guest said:
Remove your bluetooth profile(s), and do a soft reset.
I have the same problem after I used bluetooth.
Click to expand...
Click to collapse
Not even flashing with new rom is helping as I wrote
Click to expand...
Click to collapse
What has flashing with a new rom have to do with removing your bluetooth profile?
Click to expand...
Click to collapse
dude, thanks for trying to help, but you should know better. flashing with a new rom erase everything including the the BT profile. I still think the problem is the headset jack.
And there’s no sound when I pick up and no one hear me on the other side unless I use the headset or the Bluetooth headset, everything works great then even playing music !??
Click to expand...
Click to collapse
This is telling me that you DID install the bluetooth again, and so you have a bluetooth profile, what is causing the no sound problem!
I have exactly the same problem as you.. When I remove the bluetooth profile all is working fine again.. that is.. untill I set it up again, and use it.. Than the SAME problem is back.
thank alot , but still got the problem even with the BT-profile removed, I have to use the wired headset to be able to hear anything
Problem Solved :lol: :lol: :lol:
I Opened the damn thing and took a look at the 2,5mm jack and guess what, it was broken ( I remember dropping the phone once for a week ago), I just removed it ( I don’t use the headset but I need the speaker), and everything is loud and clear now,
and with a Sprite Backup file I’m back now :twisted:
!!!?
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Re: !!!?
hishnik said:
I have such problem, but I think it really barbarian means of solving problem.
Is there any cleaner way?
Click to expand...
Click to collapse
I read in another post somewhere that there is a microswitch in/near the headphone jack that switches off the sound to the speaker. Apparently, if it sticks, you poke a paper clip in and twiddle it about and you'll free it.
no sound form jasjar
having same problem. poked around with paperclip and all that, but still no sound. dont need headphone jack because hoping to use latest a2dp hack form latest rom for jasjar to be able to use BT headset. will removing headphone jack affect using BT headphones? need external sound.
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
just got my jasjar back after having cracked lcd and headphone jack replaced. sent to http://www.pocketpctechs.com out of california as suggested by very helpful user on this site. cost me around $20 dollars and took only a day to fix. works fine now!
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
My O2 XDA IIs is behaving rater unusally. For a while I've had the problem that many people have reported where I can hear nothing during a call but the other person can hear me. This could be remedied by a soft reset. However now, no amount of resets seem to fix the problem.
The baffling thing is though that the speaker hardware would appear to be working as MediaPlayer still plays music out of it and the phone still rings etc. However no sound what so ever comes through the 2.5mm socket now, from either a call or from MediaPlayer.
What on earth can I do to fix it?
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Guys, are your problem similar to mine? My problem is that the speaker is not working even though playing mp3. I thought it was radio problem, so flashing new rom also doesnt help. It is really the headphone jack cause the problem? When i flash to new rom, the speaker works, but after the auto config, the speaker doesnt even sound.
Please advise me on this. Thank in advance
Im having problems getting the headphone equalizer to work. It works fine for one song but as soon as the next track starts or if i skip forwards or backwards to the next or previous track it resets to flat. This happens if I set the equalizer then click OK and go back to the audio manager or if i start the song going and then change the equalizer and leave the equalizer running.
Anyone know if im doing something wrong or is it a problem with the equalizer?
HungryHippo said:
Im having problems getting the headphone equalizer to work. It works fine for one song but as soon as the next track starts or if i skip forwards or backwards to the next or previous track it resets to flat. This happens if I set the equalizer then click OK and go back to the audio manager or if i start the song going and then change the equalizer and leave the equalizer running.
Anyone know if im doing something wrong or is it a problem with the equalizer?
Click to expand...
Click to collapse
Try this instead.. Install on device and soft reset..
Thanks for the cab. It works well but I prefer the sound of the 5 band equalizer without SRS.I listen to a lot of drum and bass and SRS boosts the treble too much.
Anyone else had any sucess with the SJ Equalizer?
leo-chan said:
Try this instead.. Install on device and soft reset..
Click to expand...
Click to collapse
I don't realy like it either sounds strange, perhaps it works better with the crappy headphones that came with the device but with a nice pair of phones it just sounds strange no matter how I set it up.
After searching another forum then getting linked backed to this forum I found Pocketmusic. It works great,looks great and sounds amazing.
jompao said:
I don't realy like it either sounds strange, perhaps it works better with the crappy headphones that came with the device but with a nice pair of phones it just sounds strange no matter how I set it up.
Click to expand...
Click to collapse
I don't know about you guys, but I use MDR-EX90LP earbuds from Sony and the SRS thing sounds pretty good (with cable adapter, NOT bluetooth). When paired with the Coreplayer 1.3 it sounds better than my iPod...
equlizer
I downloaded the wow srs arm equalizer and it was working like a charm with bt and regular haedsets but i tried using the bt with the equlizer the next day and it wasnt workink it just work with regular headsets...
What should I do to get blue tooth to get woking again any suggestions????????
sj smartphone equalizer
leo-chan said:
Try this instead.. Install on device and soft reset..
Click to expand...
Click to collapse
I downloaded this eq and it was workink with blue tooth and regular headphones the next day the bt wasnt working with it just the regular head phones wat can i do about that any sugestions???????
smartphone eq
i installed and soft reset and its still not woking thank you for the sugesstion
If you hav any other suggesions pleas let me know
julsan said:
i installed and soft reset and its still not woking thank you for the sugesstion
If you hav any other suggesions pleas let me know
Click to expand...
Click to collapse
i have same problem to..
when i open srswow xt got msg appear "no WOW XT driver found. The control panel will now exit"....
somebody can help me.
Hi. I searched the forum's and couldn't find anything so here's my problem. I don't seem to be getting stereo output from my tablet.I have tried two headphones and downloaded a few stereo test from youtube and all they are all in mono . I've also been to the tablets settings and everything seems fine there.And before you ask, yes the plug is pushed in all the way.Thanks for any help.
what about stereo through the built-in speakers?
Same thing, mono sound through speakers as well.
Update: Stereo working now. I had to reset the tablet. Thanks for all your help.
krico said:
Update: Stereo working now. I had to reset the tablet. Thanks for all your help.
Click to expand...
Click to collapse
Good to hear.
As I was poking around on my tablet, I noticed an accessibility setting that sets the audio to mono, and I thought of your thread.
Is your tablet the 10.1 2014 edition because i didn't see any setting like that on mine.
krico said:
Is your tablet the 10.1 2014 edition because i didn't see any setting like that on mine.
Click to expand...
Click to collapse
Yes, it's a new P605. It took me a long time to find it again, as it's in the accessibility settings, not the sound settings.
Settings -> Device -> Accessibility. (Then scroll down to see mono mode).
Yeah... Really easy to find
Lol, thanks dude. You get a thumbs up for that one. I can't believe I missed that in the settings. Obviously I wasn't looking hard enough but thanks again so if it ever happens again, (which shouldn't have happened at all) I'll know where to look.
I also have the same problem. I have the P605 version of tab. I've already ticked and unticked the mono/streo in accessibility but my output for built in speaker is still mono. Only the left speaker is functioning and the right isnt. For the headset, both produces sounds. I cant remember I installed something that have caused this.
Anyone who would like to answer my previous post?
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
headset problem too....
awkm said:
Weird thing started happening to my phone: when I plug in a pair of headphones (with or without mic) the phone does not detect that they are plugged in! Sound always comes out of the speakers. I've used apps like SoundAbout to force sound of the headset jack and it seems to do the trick. But as you know, this just spoofs the phone... it still thinks it's using the speakers so you'll lose mic capabilities.
The odd thing is that if I turn off my phone, plug in a pair of headphones, and then continue to turn my phone back on... once booted the phone will recognize that it has a pair of headphones plugged in and everything will be fine. Won't work when I unplug and try to replug. It only detects the headphones on boot.
1) Is there a solution to this?
2) Anyone know how the mechanics of this works? It seems like on boot it always tries to check if there are headphones... but something mechanical in the headphone jack triggers the check after boot (may mean I have a mechanical failure)?
3) Is there a way to force headphone mode, more so than what Soundabout does? It's a pain to lose the mic, I use it a lot.
Here are other pertinents:
- Running newest SkyDragon Lollipop GPE rom with Sense Firmware... don't think it's the rom because it worked just last week
- Only recently started happening, not sure what could have caused it
- Noticed the phone always tries to update HTC Service pack, I think I fixed that issue
- Have yet to try cleaning, need to get rubbing alcohol
Thanks for any help anyone can provide me.
Click to expand...
Click to collapse
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Quote:
Originally Posted by seadersn
with removal i meant serial and imei in your post before my last post
Thank you for the feedback on personal data. (I appreciated it)
So I've did a factory reset and start flashing the "Stock Google Play Edition Rom LXR22C.H5" rom again.
Since I'm Rooted, this is the one I've flash: RUU-HTC_One_M8_GPE_5.0.1-3.11.1700.5_rooted
I've followed the instruction on #2031. Everything else work.... again only plugging in the headset into the jack, does switch music from speakers to headset.
As mentioned before I've upgrade my Stock AT&T HTC One (M8) to GPE 4.4.2 and automatically received all the updates OTA to get to 4.4.4 (Audio was working thru headset and/or speakers with no problems)
The only problem with 4.4.4 is that you don't have access to SD storage. (though I found a patch to update in the system, but haven't tried it)
I like the speed, simplicity of 5.0.1. That is why I keep on trying.
Also I tried changing the Kernel - using skydragon kernel (still same problem with audio). But when I used the kernel for 4.4.4 of GPE, the booting hung at HTC logo before it showed the dead android.
So I'm lost for option other than using an app to manual switch to headset from speaker....(bummer)
Anyway new ideas to proceed are appreciated.
gevans01 said:
I was experiencing the same problem and I know it is not the hardware since I was able to go back to 4.4.4. GPE and get music thru the headset like you. I tried to get an answer from other contributors but they think it is the jack. Anyway below is what I've wrote to get help.
Click to expand...
Click to collapse
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
awkm said:
Yeah that makes no sense why it would be hardware since you reverted back to 4.4.4 and it worked again.
The other reason why I don't think it's completely hardware is that, as I mentioned before, if you turn off the phone and then leave headphones plugged in while booting up the phone will recognize them. However, unplugging after boot will permanently lose headphone detection until you leave headphones plugged in during a fresh boot.
I'm thinking that either the software is not calling IsHeadphonePluggedIn (hypothetical) when the hardware is triggered (headphone plugged in), but always calls IsHeadphonePluggedIn when the phone boots. OR, the hardware trigger that tells the phone to call IsHeadphonePluggedIn is truly broken leaving cold boot the only method to detect headphones.
Maybe I'll try downgrading at some point but the weird thing is that I swore this was working without any major ROM updates... like just last week! For the time being, I'm using bluetooth.
Click to expand...
Click to collapse
Not sure if you've ever used Tasker but you should download that. They have a trigger for "headphone plugged in," and I'd be curious to see if it triggered when you plug in your headphones. You could just have it play a sound or something when it senses headphones. If that works, then it's whatever service handles that hardware interrupt, not the interrupt itself.
thebobmannh said:
Not sure if you've ever used Tasker but you should download that.
Click to expand...
Click to collapse
Yes, I have and use Tasker. In fact, I have a Profile for headphone or bluetooth headset detection. This is how I know the phone is definitively detecting my headphones on boot—the designated Tasker action triggers and I get the Profile highlighted as active.
When I unplug the headphones, Tasker responds accordingly and runs the exist task and the profile is no longer highlighted. When I try to replug, Tasker doesn't do anything. Headphones not detected.
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
awkm said:
Another tidbit I've discovered:
- Safe mode doesn't help with headphone detection. In fact, there is none even after cold boots. Tried safe mode to isolate any 3rd party apps that might be causing issues.
- To clarify about reboots. The phone needs to be shutdown completely and turned on while the headphones are plugged in to detect. Issuing a reboot via APM doesn't really work, I don't think.
Straaaange.
Click to expand...
Click to collapse
I'm checking in again to see if anyone solved the headphone detection issue with 5.0.1. As you mentioned about powering down the phone (and not reboot) does detect the headphone, but after you unplug the headphone it revert back to the speakers. No change when you reinsert the jack for the headphone. I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8. I really like the features of 5.0.1 but not interested in a dual approach to listen to music in my headphone. Let me know if anyone find a new technique that will work with our M8. (I don't think anyone have been able to get the AT&T version of M8 to work with the headphone on 5.0.1.....If I'm wrong please share......)
gevans01 said:
I've tried all custom roms that uses 5.0.1 and none works with the headphone. Right now I'm still running GPE 4.4.4 on my AT&T One M8.
Click to expand...
Click to collapse
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
awkm said:
I did come across a solution, but it may be unique to me. It's entirely hardware related. Just inside the headphone jack, there is a small connector. I used a pin to pry it out slightly. After doing this, plugging headphones in works like normal. That outer most pin must be the trigger that tells the phone to check if there is a headphone connected.
However, as I mentioned, even without this pin being activated I can still get the phone to detect the headphone buy just cold starting the phone. It may be a difference in how 4.4.4 and 5.0.1 uses the hardware on the phone. I have no clue, it's annoying nonetheless.
So give that a shot!
Click to expand...
Click to collapse
Interesting.....Did you open your M8 to pry the pin? I tried looking inside the jack but can't see any pin. Plus I looked at the disassembly video on you-tude for the M8 and said, no way (smile). So I'm willing to try but I can't see the pin you're talking about. Is there a diagram you can point me too? Or provide more information. Very much appreciated...
gevans01 said:
Did you open your M8 to pry the pin?
Click to expand...
Click to collapse
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Maybe you need to change the whole headphone jack. There's a DIY video on youtube for it. Just give it a try if there isn't any other solution.
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
awkm said:
Haha no way I'd open the phone. If you look into the headphone jack with the screen facing up, the pin should be near the 1'o'clock position. It's hard to see so use a flashlight or something. It's very close to the opening, 2-3mm deep only.
Click to expand...
Click to collapse
Thanks for the tip. I will try it and give you an update.
gevans01 said:
Thanks for the tip. I will try it and give you feedback.
---------- Post added at 03:42 AM ---------- Previous post was at 03:26 AM ----------
Thanks for the tip. I will try it and give you an update.
Click to expand...
Click to collapse
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
gevans01 said:
Well I've reinstalled 5.0.1 and tried digging into the jack, trying to move the 1pm pin just a few centimeters....well I finally gave up. I was not able to make it work and I got concerned that I would damage the jack, which will cost me a fortune in repair bills. (smile)
Thank you for recommendation....I guess I will use the soundabout app until AT&T release the one for our M8.
Click to expand...
Click to collapse
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly
Sent from my HTC One_M8 using XDA Free mobile app
Suresh9488 said:
Try to wipe the data...its worked for me even I have tat issue 3 weeks before ...after wipe everything going smoothly0\
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
gevans01 said:
\
Can you explain in more detail when you say "wipe the data".....Are you referring, go into recovery and do a data wipe? or go into an app (which app) and clear the cache or something?
If you can give me the step by step procedures I would appreciate it.
Also did you try this on a "AT&T HTC One M8" versus a HTC One M8? because I'm beginning to notice that there is a very slight difference between the two.
Thanks,
Click to expand...
Click to collapse
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
No audio thru headphone after installing 5.0 (problem solved!)
Suresh9488 said:
Go to setting enter into backup and reset option and do a full reset n try I am sure it will work gud luck
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
I am very happy for you....
Sent from my HTC One_M8 using XDA Free mobile app
gevans01 said:
Thanks for the advise....
Geee.......I've been using these Klipsch headphones for all my mobile phones and it has been working on 4.2 to 4.4.4. Once I've upgraded the rom to 5.0.1 audio stop going through the klipsch headphone. Going back to 4.4.4 (lucky I made a Nand backup) it started working again. So I tried several different methods from several people and nothing worked.
Since I tried, what you said, resetting the phone....and of course it still didn't work with the Klipsch headphone.
dah....are you seeing the pattern. Finally the light came on and I decided at the last minute, before restoring 4.4.4 rom, was to find my old Bose headphones and try it.....Wow. It worked but I had to try plugging it in and out to see if it continued working.....AND...yes it continue to play music through the Bose headphone. (tried the Klipsch again and had the same old - not working)
The only difference between the Bose and the Klipsch is that the Klipsch has three rings on the jack. The third one is used to control the player....i.e. skip/stop/pause. The Bose has only two rings on the jack....(just music input)
For others that are experiencing the "No Music thru the headphones" when you install 5.0......check the jack for two vs three rings.
Thanks again for the insight.... (problem solved - closed case)
Click to expand...
Click to collapse
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
n1234d said:
If you do want to use your klipsch headphones, however, you can just use a standard 3.5mm extension cord in the middle. I've used this trick in the past with an old Nokia and my htc earphones
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Great advise...it is cheaper to use an extension then to buy another headphone...thank you.:good:
I have an issue with a new pair of bluetooth headphones i have just purchased. Specifically media playback sound quality. It is utterly woeful, with distortion, hiss, and cackles/pops continually over any media player or videos. Sound quality on calls is fine. I know that the headphones work, as i have used them on other devices and they function fine. My S9 is currently up to date.
I initially though that it was something to do with volume limiter as the weird thing is occasionally when they immediately connect and i play some music they work fine, then the quality drops as soon as the limiter notice pops up. I have checked though and the limiter is actually turned off. Turning it back on doesn't solve the issue either. I've gone so far as to wipe the whole cache partition and nuke all the caches, but that hasn't helped either.
Is there a known issue that I am unaware of ? Hopefully with a resolution, or other obvious steps i could try that people could recommend, as I am out of ideas now.
Spin_Dr_Wolf said:
I have an issue with a new pair of bluetooth headphones i have just purchased. Specifically media playback sound quality. It is utterly woeful, with distortion, hiss, and cackles/pops continually over any media player or videos. Sound quality on calls is fine. I know that the headphones work, as i have used them on other devices and they function fine. My S9 is currently up to date.
I initially though that it was something to do with volume limiter as the weird thing is occasionally when they immediately connect and i play some music they work fine, then the quality drops as soon as the limiter notice pops up. I have checked though and the limiter is actually turned off. Turning it back on doesn't solve the issue either. I've gone so far as to wipe the whole cache partition and nuke all the caches, but that hasn't helped either.
Is there a known issue that I am unaware of ? Hopefully with a resolution, or other obvious steps i could try that people could recommend, as I am out of ideas now.
Click to expand...
Click to collapse
i flip back and forth between a few different BT headsets and never have this issue and have also used the same headsets on several devices in my bag-o-tricks. The phone does use a DAC for music where its pretty raw for the phone convo, which could explain why calls are ok, but music isnt. Is this your only pair of BT headphones? Do you know anyone who will help you test them on another phone?
Spin_Dr_Wolf said:
I have an issue with a new pair of bluetooth headphones i have just purchased. Specifically media playback sound quality. It is utterly woeful, with distortion, hiss, and cackles/pops continually over any media player or videos. Sound quality on calls is fine. I know that the headphones work, as i have used them on other devices and they function fine. My S9 is currently up to date.
I initially though that it was something to do with volume limiter as the weird thing is occasionally when they immediately connect and i play some music they work fine, then the quality drops as soon as the limiter notice pops up. I have checked though and the limiter is actually turned off. Turning it back on doesn't solve the issue either. I've gone so far as to wipe the whole cache partition and nuke all the caches, but that hasn't helped either.
Is there a known issue that I am unaware of ? Hopefully with a resolution, or other obvious steps i could try that people could recommend, as I am out of ideas now.
Click to expand...
Click to collapse
I have that issue too.
youdoofus said:
i flip back and forth between a few different BT headsets and never have this issue and have also used the same headsets on several devices in my bag-o-tricks. The phone does use a DAC for music where its pretty raw for the phone convo, which could explain why calls are ok, but music isnt. Is this your only pair of BT headphones? Do you know anyone who will help you test them on another phone?
Click to expand...
Click to collapse
I do actually have another pair of bluetooth headphones i use for my PC, i will try them with the phone tonight, though I am sure that the headphones themselves are fine. They work with my watch without any issues.
Ugulp said:
I have that issue too.
Click to expand...
Click to collapse
I have experimented a bit more, and think that this is a codec issue. If I enable the developer menu, and switch to another codec (not the SDC if defaults to) them restart the headset they work fine. Problem is that it always defaults back to SDC whenever the headphones are disconnected for a period of time. I can't see how to force the use of another codec, both AAC and LDAC for example work absolutely fine with the headset. Though this is quite a long process just to get the headphones to work each and every time i want to use them.
Spin_Dr_Wolf said:
I do actually have another pair of bluetooth headphones i use for my PC, i will try them with the phone tonight, though I am sure that the headphones themselves are fine. They work with my watch without any issues.
I have experimented a bit more, and think that this is a codec issue. If I enable the developer menu, and switch to another codec (not the SDC if defaults to) them restart the headset they work fine. Problem is that it always defaults back to SDC whenever the headphones are disconnected for a period of time. I can't see how to force the use of another codec, both AAC and LDAC for example work absolutely fine with the headset. Though this is quite a long process just to get the headphones to work each and every time i want to use them.
Click to expand...
Click to collapse
if im not mistaken, the default codec is controlled by the stack overflow. what version of android are you using?
youdoofus said:
if im not mistaken, the default codec is controlled by the stack overflow. what version of android are you using?
Click to expand...
Click to collapse
From the software information screen...
Android Version : 9
Baseband Version : G960FXXU6CSG4
Kernal Version : 4.9.59-16381285
Spin_Dr_Wolf said:
From the software information screen...
Android Version : 9
Baseband Version : G960FXXU6CSG4
Kernal Version : 4.9.59-16381285
Click to expand...
Click to collapse
youre on the U6 bootloader, when did you last update and when did the bt sound issue start?
youdoofus said:
youre on the U6 bootloader, when did you last update and when did the bt sound issue start?
Click to expand...
Click to collapse
I last updated 02nd August 2019. I have just checked again, and apparently running the latest version available OTA.
I couldn't tell you when the bluetooth sound issue started, as this is the first time in a long time i have connected any bluetooth headphones to my phone. I think previously connected the other headphones i have yet to check again, but am not certain.
Spin_Dr_Wolf said:
I last updated 02nd August 2019. I have just checked again, and apparently running the latest version available OTA.
I couldn't tell you when the bluetooth sound issue started, as this is the first time in a long time i have connected any bluetooth headphones to my phone. I think previously connected the other headphones i have yet to check again, but am not certain.
Click to expand...
Click to collapse
gotcha. i also understand youre probably at work like many of us poor schmucks such as myself, which would make it kinda hard to test things out right this moment. But do any of your coworkers have a BT speaker you can connect to to try to replicate the issue there as well? Im mainly trying to eliminate variables at this point. You might try flashing the most current Odin files with the "HOME_CSC" as to not erase your user data. Itll over-write the code for the OS and so forth and nuke any software issues that might be causing this
I've now tested another set of bluetooth headphones and they work absolutely fine, they default into the aptX codec. Is that determined by what the device primarily works with ?
Spin_Dr_Wolf said:
I've now tested another set of bluetooth headphones and they work absolutely fine, they default into the aptX codec. Is that determined by what the device primarily works with ?
Click to expand...
Click to collapse
yes, the codec is changed by the DAC within the phone to be the best suited to whatever device its connecting to. What kind of headphones are you using that get the garbage sound? I have a pair of Tozo T10's, which are the off-brand individual ear buds from amazon for $50 and they sound very good. I also have a pair of maxsonic bluetooth buds which cost $17 that are connected to each other by a wire and they sound equally as good.