Develop Bugs

Stock rom 4.16 and update package 5.06（android8.1）

Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://drive.google.com/file/d/1lalt4mZAx6x2GKws7OYvECzso7XDPuAp/view?usp=sharing
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
recovery-3.2.1-nx563j_7.x-8.x https://drive.google.com/file/d/1I5lrwwKKFKlE3LFf1Xh1p4GeU6ZW3Dy-/view?usp=sharing
please delete fingerprint and re-add

failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED

diiikaaaa said:
failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED
Click to expand...
Click to collapse
Does all work?
I think you are right as it is the pre-released stock rom, it should upgrade from 4.16.

you can flash it directly from TWRP if you remove from the updater script of the 4.16-5.06 zip file all thel lines before this statement: # ---- start making changes here
It works.
I've attached here below a working script.

kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
-------- flash the Nubia UI v506 by TWRP https://1drv.ms/u/s!AqD4NQPahcDKhj7OCrH2a1qL7_eW
Click to expand...
Click to collapse
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks

Zenuno said:
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks
Click to expand...
Click to collapse
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.

Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
How about Magisk?

Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?

kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

backboycn said:
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?
Click to expand...
Click to collapse
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....

"This item might not exist or is no longer available"
is what I'm getting with first link?

would anyone be so kind to post some fresh links? downloads aren't working.

I got. The same prob. Then i use one drive app and it works
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
aljoscha81 said:
I got. The same prob. Then i use one drive app and it works
Click to expand...
Click to collapse

pico gapps worked fine with method to edit setupwizard.apk - no magisk though , pretty sure can report magisk fails to https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589/page558
looking at the end of thread i think many experiencing no magisk issues
---------- Post added at 11:39 AM ---------- Previous post was at 11:00 AM ----------
kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
Hi and thanks, any chance you managed to get magisk working ?
---------- Post added at 11:43 AM ---------- Previous post was at 11:39 AM ----------
Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
as there is currently no working magisk can I ask if this method to change apk to sav works for any app? At least I could debloat the ROM a little ....

for those that couldn't get the update file: this download wil work for 1 week only
https://we.tl/GRKgolmX2D

Went back to lineageos... Couldn't get gapps to work... After reformating data partition phone only booted to bootloader, couldn't get back in the os...

Topogigi said:
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....
Click to expand...
Click to collapse
Everything now return to stock and I want to flash TWRP, but cannot connect with computer. The driver is not working. When I do fastboot device, it shows waiting for device. My operation system is win 10. Does anyone share a driver to me?
Thank you.

Got anybody information about is project treble in this rom?

aljoscha81 said:
Got anybody information about is project treble in this rom?
Click to expand...
Click to collapse
no... project treble checker says it's missing the A/B filesystem, so it's not ready for Treble

Could give us a little more details on how to do this: "Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb "?
Thanks
---------- Post added at 08:34 PM ---------- Previous post was at 08:01 PM ----------
If it is not asking too much, share also the modified gapps.

[HOW TO] Flash ROM Havoc GSI 3.1 [Android 10] [STABLE] [UPDATED 28/01/2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​I'm not responsible for whatever damage this could possibly cause to your device.
Updated with latest Havoc release : 28/01/20
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/development/recovery-twrp-galaxy-a50-t3916199
Rom GSI download link : https://sourceforge.net/projects/ex...-OS-v3.1-20200111-ARM64AB-GSI.img.xz/download
Please download this file and don’t download last havoc 3.1 release because it should no work.
Thanks to ExpressLukeGSI, phh, havoc for this project.
1. Format Data + Wipe all
2. Power Off + Go back to Recovery TWRP
3. Flash System img
4. Power Off + Go back to Recovery TWRP
5. Resize the system partition, in TWRP go to
Wipe Advanced Wipe Select System Repair or change file system Resize file system
6. Flash these gapps : https://easyupload.io/llnivj
7. Then mount vendor + system and flash this fix in TWRP : https://easyupload.io/8se2a7 (It will fix overlay and dualsim)
Issue knowed :
Fingerprint doesn't work
MPT not working
ROM OS Version: 10 Q
Security patch : January 2020
ROM Firmware Required: TWRP Recovery
Version Information
Status: Stable GSI
Last Updated 2020-01-28

Eek, it's finally happening, Testing this asap... just cause I can why the hell not
---------- Post added at 06:58 AM ---------- Previous post was at 06:29 AM ----------
Installed and up and running. Tested on FN variant

Voniaak said:
I'm not responsible for whatever damage this could possibly cause to your device.
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/how-to/[email protected] meliohe
Rom GSI download link : https://bit.ly/2m9Wk3y
Official Thread : https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
Thanks to Vincent, phh, havoc for this project.
Guide :
1. Wipe all
2. Flash System img + Flash DM
3. Power Off
4. Go back to Recovery TWRP
5. Resize system
6. Flash these gapps : https://filebin.net/9hgskxxbr7hdi27r/open_gapps-arm64-9.0-pico-20190126.zip?t=2z9sttui or https://drive.google.com/file/d/1nS2z4emxHovZ0x3CqXl59r8oBqx9DiPU/view
7. Delete bootanimation from TWRP in System/System/Media/Bootanimation.zip
8. Power Off wait 2 reboot and its done
Issue knowed :
Fingerprint doesn't work
Magisk does'nt work
Instead of these issue it's okay !
Many thanks to @muhamet for give me video and guide
Click to expand...
Click to collapse
Nice job my frend

Fyi, another issue for the list:
Dual Sim is not working

Add issues : Changing default USB configuration reboots phone
Brightness bar is buggy AF
sound is lesser than stock
However , nice to see projects for our device .
Thumbs up !

O thank you, sound is ok for me!
And battery life better on havoc than one ui

Voniaak said:
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Click to expand...
Click to collapse
Yes it is better

Also, Magisk is working for me
I flashed the zip with TWRP and when powering the phone on I was holding down the volume up and power and let go of both immediately when the screen turns on.

So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.

Agil1ty said:
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Click to expand...
Click to collapse
No issues

So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?

Agil1ty said:
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Click to expand...
Click to collapse
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.

Ain't able to flash
Hello everyone. One quick question.
When I try to install the ROM image in TWRP, the device will restart on it's on. Any ideas of what the problem could be?
I tried to reistall samsungs firmware, reistall TWRP recovery and retry to intall the ROM but no luck.
Thnaks in advance for the replies...
Cheers,
F

AjayL13601 said:
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Click to expand...
Click to collapse
Thank you, this really helped. FInally got it to install. However, sometimes after using some apps the phone becomes really slow and sluggish (most noticable after using video apps, like youtube). Does anyone else also see this behaviour? I had to reboot the phone to get back to normal.
So far i really like the rom, everything I use works (bluetooth, hotspot, wifi, 4g, camera).

Has this ROM been modified specifically to work with our device or is it stock project treble?

AjayL13601 said:
Has this ROM been modified specifically to work with our device or is it stock project treble?[/QUOTE
Project treble
Click to expand...
Click to collapse

Huhhh, interesting, in that case I'm gonna try some other project treble roms

AjayL13601 said:
Huhhh, interesting, in that case I'm gonna try some other project treble roms
Click to expand...
Click to collapse
Not all treble ROMs working. Try PE working

Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!

Voniaak said:
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Click to expand...
Click to collapse
How to update?

[Recovery][Official] TWRP 3.3.1-10 [G97*0][Snap][3.Jan.20]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Official TWRP 3.3.1 for SM-G9750/G9730/G9700
*** Not for USA carrier devices, this will only work on devices with an unlocked bootloader
Telegram thread
Built using OMNI source 9.0
TWRP v3.3.1
See post #2 for install steps
Changelog...
v1
Initial build
MTP, OTG and SDcard all working
Encryption not working, but being implemented later
v2
Added N9700 support
Updated kernel to SI3
v3
Fixed img flashing
v6
TWRP is now official
Magisk patches are no longer included, patch yourself
Added dtbo img
v7
Fixed recovery_dtbo
Encryption support added
TWRP Downloads
Download TWRP 3.3.1 folder
Telegram thread
Official TWRP tree G9750
Official TWRP tree G9730
Official TWRP tree G9700
Thanks to @geiti94 and @klabit87 for allowing me to constantly pick their brains
--------------------->
Beer fund
XDA:DevDB Information
TWRP Galaxy s10, Kernel for the Samsung Galaxy S10+
Contributors
Mentalmuso, mentalmuso
Source Code: [url]https://github.com/mentalmuso/android_kernel_samsung_beyondq
Kernel Special Features:
Version Information
Status: Stable
Created 2019-10-09
Last Updated 2019-10-09

Installation
* Unlock bootloader first
* Reboot recovery and reboot system now behave normally after flashing.
* No more patching in Magisk manager at all.
* Be aware, first clean boot, hangs on building cache, hard reboot after waiting about 3min and you'll boot past this
* If simply updating your existing TWRP, v9 upwards, you only need to flash the TWRP.img in recovery. No need to reflash kernel and Magisk.
Process from bone stock
1. Flash TWRP.tar in Odin
2. Reboot directly into TWRP
3. Format data, reboot recovery
4. Flash kernel
5. Flash encryption disabler if desired.
6. Unmount system, Flash Magisk 19.4 (not 20.*)
7. Reboot system
Process from existing TWRP
1. Flash TWRP.img to recovery
2. Reboot recovery
3. Flash Kernel zip
4. Unmount system and Flash Magisk zip
5. Reboot system
--->

i want to test for sm g9730 , i join your telegram
edit: i confirm test build for sm g9730 working, bravo

For a second thought this was tgy version lol or is it?
Can someone confirm?
There's no F in the title
Edit : oh sht this is for snapdragon
Gonna flash now

tested working on TGY s10+ latest patch
Thanks man
we can now have twrp without the chinese rom.
woot woot
will donate soon

Don't update to Magisk 20.0, there are issues with it on Qualcomm devices.

Mentalmuso said:
Don't update to Magisk 20.0, there are issues with it on Qualcomm devices.
Click to expand...
Click to collapse
also seems debloat anything will get you boot bootloop
can't delete Bixby or ms crap

@Mentalmuso Thanks so much for this. I have it all setup and it appears to be working fine on the 9730.
One question though, my OEM unlock is unlocked in the dev options, however it appears to not be greyed out. I'm a bit afraid to reboot I'm not sure if vaultkeeper will jump back on.
What does it not being greyed out imply?

Fznwolf said:
@Mentalmuso Thanks so much for this. I have it all setup and it appears to be working fine on the 9730.
One question though, my OEM unlock is unlocked in the dev options, however it appears to not be greyed out. I'm a bit afraid to reboot I'm not sure if vaultkeeper will jump back on.
What does it not being greyed out imply?
Click to expand...
Click to collapse
I'm not sure, though I encountered this also, rebooted and all is fine. I'll do some research.

Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.

Fznwolf said:
Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.
Click to expand...
Click to collapse
Its [G97*0] in the OP's thread name. So it is for every s10 version. People just have to look

FlatOutRU said:
Its [G97*0] in the OP's thread name. So it is for every s10 version. People just have to look
Click to expand...
Click to collapse
Lol I understand that, I'm trying to help people though.

5. Reboot system, (remember you have to hold volume down, and bix button briefly to boot rooted)
Why vol down key? Mayby start with root press vol up-bixby-power???

Fznwolf said:
Mind posting this to the s10 or s10e threads? I think there's a lot of people looking for this that don't visit the + forums.
I'm trying to refer a few people over here.
Click to expand...
Click to collapse
I don't really want duplicate threads but I'll report to moderator to see if it can be linked

Mason76 said:
5. Reboot system, (remember you have to hold volume down, and bix button briefly to boot rooted)
Why vol down key? Mayby start with root press vol up-bixby-power???
Click to expand...
Click to collapse
Typo

After installation in TVRP, such names came out, after the wipe the date did not understand anything, how to fix it?

Mason76 said:
After installation in TVRP, such names came out, after the wipe the date did not understand anything, how to fix it?
Click to expand...
Click to collapse
I don't understand the question sorry

Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
RootExplorer dont correct work
---------- Post added at 09:32 PM ---------- Previous post was at 08:59 PM ----------
Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
I can’t edit files in the system, do not create folders, do not change names, etc.

Mentalmuso said:
I don't understand the question sorry
Click to expand...
Click to collapse
magisk in you mod twrp and kernel is 19.4-this is verry buggy version
can you add version 19.3 in you mod?
i flash back my copy patched ap file magisks 19.3 on pc and root explorer work perfect...

Mason76 said:
RootExplorer dont correct work
---------- Post added at 09:32 PM ---------- Previous post was at 08:59 PM ----------
I can’t edit files in the system, do not create folders, do not change names, etc.
Click to expand...
Click to collapse
That's not a TWRP related question

[Guide] Flashing GSI in Realme 3/3i (Android 10) [Updated on 13 Feb 2021]

Note:
-This will erase all your data so always keep a recovery backup
- This method only works on C.14 firmware version, so if you got PC then downgrade to C.14 using realme flash tool. Method for it is available in realme community. If no PC then flash custom ozip in custom recovery.
- we can only commit for all phh based GSI to boot.
Methods for flashing GSI:
• Custom Recovery Method (still needs a bit use of Fastboot)
Note: As this needs use of executing some Fastboot commands, you gotta use bugjaegar app in secondary device for Fastboot.
1) Flash Custom Recovery on your device through fastboot.
2) Now in fastboot, type the following command:
' fastboot --disable-verity --disable-verification flash boot boot.img ' (Credits to: @M.A.P)
3) now Copy your GSI Image (System.img) to your sd card.
4) Now reboot to Recovery via fastboot.
5) Press Install - > Install Image button -> Select the System.img file -> Select System Image-> Swipe to Flash.
6)) Now format data and then wipe cache & Dalvik cache.
5) now reboot to system, and GSI is flashed succesful
( If it boots to recovery then type this in Fastboot using bugjaegar app 'fastboot erase para' and 'fastboot reboot')
• Fasboot Method (Using PC)
- install custom Recovery.
-> fastboots commands to execute:
- fastboot --disable-verity --disable-verification flash boot boot.img (Credits to: @M.A.P)
- fastboot erase system
- fastboot flash system xxxx.img (name of img instead of x)
- fastboot -w
- fastboot reboot
( If it boots to recovery then in Fastboot type 'fastboot erase para' and 'fastboot reboot')
Note: if you guys want to revert to stock then can follow same procedure and use stock boot.img rather than the system img . It can be found in ozip file, extract it after converting it to zip file.
Special Thanks to all testers who tested and confirmed this method.
Here are some screenshots of GSI we booted:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot credits: @Animesh20

Can I have a link of TWRP that work on android 10? thanks

Gemeauty said:
Can I have a link of TWRP that work on android 10? thanks
Click to expand...
Click to collapse
Hey, currently twrp is not Available to public until further notice by dev. Meanwhile we do have ofox Recovery for android 10.
You can contact me on Telegram for getting its link since I have current restriction to upload links. ?

I couldn't get the second step which boot.img file to flash where is that boot.img file ??

riazali17 said:
I couldn't get the second step which boot.img file to flash where is that boot.img file ??
Click to expand...
Click to collapse
Hey its talking about the boot.img from the ozip file of the version you are in.

realme 3 vbmeta.img android 10 please provide me

Neeraj 011 said:
realme 3 vbmeta.img android 10 please provide me
Click to expand...
Click to collapse
Hey, there is no need of that. Just follow the method stated in this thread. ?

Hey , Is Here Anyone Who Can Help Me In Rooting realme 3 [ I AM ABLE TO ROOT IN ANDROID 9 , I NEED HELP REGARDING ANDROID 10 ]
-THANKS

I've followed all of your steps, but facing bootloop issue sharing you my phone details and step which i have followed.
Realme 3 RMX1821, Version Android 10 C.16.
I have Corvus GSI for realme 3, i have extracted boot.img of C.16 with (ozip decryption tool from github) i have done everything and also tested multiple GSIs but always i stuck in bootloop. my phone get restarting again and agian. please guide
{Mod edit: Reference to Telegram removed! As an exemption from rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to provide links to their social media in the OP of their own development threads. These conditions obviously don't apply to this post! Please use XDA for public discussions that would help the whole community.}

azharmansoori said:
I've followed all of your steps, but facing bootloop issue sharing you my phone details and step which i have followed.
Realme 3 RMX1821, Version Android 10 C.16.
I have Corvus GSI for realme 3, i have extracted boot.img of C.16 with (ozip decryption tool from github) i have done everything and also tested multiple GSIs but always i stuck in bootloop. my phone get restarting again and agian. please guide
{Mod edit: Reference to Telegram removed! As an exemption from rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to provide links to their social media in the OP of their own development threads. These conditions obviously don't apply to this post! Please use XDA for public discussions that would help the whole community.}
Click to expand...
Click to collapse
Use orangefox recovery for installing custom os...

Gyanesh1920 said:
Hey , Is Here Anyone Who Can Help Me In Rooting realme 3 [ I AM ABLE TO ROOT IN ANDROID 9 , I NEED HELP REGARDING ANDROID 10 ]
-THANKS
Click to expand...
Click to collapse
I am sorry but as of now android 10 based realmeUI can't be rooted nor any roms or gsi based on realmeUI

What GSI android version you used? Can i have a link. Is it android 11 phh treble gsi? Thanks in advance

Can I install A12 GSI BY THIS METHOD??AND IS THIS PROCESS SAME FOR CUSTOM ROM USERS?

[ROM][UNOFFICIAL][TREBLE][10.0][NB1] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Working:
It boots
WiFi
Bluetooth
Camera
Navigation Keys
Fingerprint
Sensors
GPS
RIL
SDCard
Headphones
Ringtones
Bluetooth audio
Known bugs
WiFi Hotspot
Selinux permissive
Stock LOS recovery doesn't boot
Dual SIM
You tell me
Install instructions
Flash the newest T-Virus release (if you have already installed T-Virus, reflash the newest release it contains a fix to TWRP)
After T-Virus has flashed and it has booted to the Android 10 GSI test environment, type this command to reboot to recovery mode
Code:
adb reboot recovery
Once in recovery, copy the Lineage OS zip file to the internal storage
Go to the Install section and flash the Lineage OS zip
After the zip has flashed, go to Wipe->Advanced Wipe, tick the "Dalvik /ART Cache" and "Data" boxes and wipe them
Head to Wipe->Format Data and type yes to format the data partition
Finally go to the Reboot section, select Slot B to switch to the flashed slot and then to System and swipe to reboot
Profit?
OpenGApps/Magisk:
After the ROM successfully boots up, many of will will want to install Magisk and/or OpenGApps. To do that you need to install the latest TWRP release
Code:
adb reboot bootloader
fastboot flash:raw boot --slot=all twrp-3.4.0-0-NB1.img
fastboot reboot
After that reboot to recovery, flash OpenGApps and/or Magisk. If you flash OpenGApps don't forget to wipe the data partition to prevent Google Setup from crashing
Downloads
T-Virus: https://forum.xda-developers.com/nokia-8/development/t-virus-infect-nokia-8-project-treble-t3946249
ROM: https://github.com/GPUCode/android_device_nokia_nb1/releases
TWRP: https://forum.xda-developers.com/nokia-8/development/recovery-twrp-3-4-0-0-nb1-t4187679
Notes:
Only Clean Installation Please
Bug Report Without logs means nothing
Magisk is untested
In case you flashed any gapps, re-flashing is needed if you're updating the ROM
Reporting Bugs:
DO NOT Report bugs if you installed Xposed or weird magisk modules
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Sources:
Device tree (Common): https://github.com/GPUCode/android_device_nokia_msm8998-common/tree/lineage-17.1
Device tree (NB1): https://github.com/GPUCode/android_device_nokia_nb1/tree/lineage-17.1
Kernel: https://github.com/resident-nokia/umbrella
Vendor tree: https://github.com/GPUCode/proprietery_vendor_nokia/tree/lineage-17.1
XDA:DevDB Information
LineageOS 17.1 for NB1, ROM for the Nokia 8
Contributors
THMSP, OneWayGamer, oaid
Source Code: [url]https://github.com/LineageOS[/URL]
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2020-11-03
Last Updated 2020-11-03[/QUOTE]

Reserved

You gotta be kidding me... @emufan4568
Are you the maintainer? Great work, appreciations.
Should Selinux permissive be considered as BUG? It's a state with its own properties...
Camera is not mentioned to be working or not.

Finally it's here ! Great work :good:
Hopefully I'll be able to use it on a daily basis soon :victory:

Thank for great work sir

Wow great work I knew that you could do it!

How To Install
Help I Cant Install

sdbadshah said:
Help I Cant Install
Click to expand...
Click to collapse
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes

emufan4568 said:
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes
Click to expand...
Click to collapse
The problem with me is i cant understand the method to install iam following the process showed on github but whenever i enter command its says No Such File Dictionary
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
emufan4568 said:
Please go into more detail about the issue you are facing. Just saying "I need help" won't solve anything. Keep in mind this ROM is still beta so expect bugs and crashes
Click to expand...
Click to collapse
And Also My Device Is stucked Into Fastboot mode because i have entered this comand fastboot erase boot_a
after this command iam entering fastboot flash:raw boot_a /path/to/boot.img
but its giving error
---------- Post added at 10:26 PM ---------- Previous post was at 10:09 PM ----------
Now Need Some Help To Install Twrp For Gapps

sdbadshah said:
The problem with me is i cant understand the method to install iam following the process showed on github but whenever i enter command its says No Such File Dictionary
---------- Post added at 10:09 PM ---------- Previous post was at 09:59 PM ----------
And Also My Device Is stucked Into Fastboot mode because i have entered this comand fastboot erase boot_a
after this command iam entering fastboot flash:raw boot_a /path/to/boot.img
but its giving error
---------- Post added at 10:26 PM ---------- Previous post was at 10:09 PM ----------
Now Need Some Help To Install Twrp For Gapps
Click to expand...
Click to collapse
You have to replace "/path/to/boot.img" with the path of the file on your computer... If your prompt is already in the same folder than your files are then just put the filename and it should be ok...
Actually I'm not sure if you should install this ROM as you don't really sound familiar with command prompt, you'd better wait for a stable release as it's just intended for testing.

Bgirka13 said:
You have to replace "/path/to/boot.img" with the path of the file on your computer... If your prompt is already in the same folder than your files are then just put the filename and it should be ok...
Actually I'm not sure if you should install this ROM as you don't really sound familiar with command prompt, you'd better wait for a stable release as it's just intended for testing.
Click to expand...
Click to collapse
Yup iam New Into It But I hAve installed Succecfully But Now What about gapps,How Can I Install Twrp,I Have tried to boot into twrp without Installing But Its Stuck On Powered By Andriod

sdbadshah said:
Yup iam New Into It But I hAve installed Succecfully But Now What about gapps,How Can I Install Twrp,I Have tried to boot into twrp without Installing But Its Stuck On Powered By Andriod
Click to expand...
Click to collapse
The boot command does not work for the Nokia 8. You have to flash T-virus TWRP, then flash OpenGApps, reboot to download mode again and then type "fastboot format userdata" to prevent the Google Setup from crashing. Please read the whole thread before asking any questions

So... I used the rom for a few hours, played with settings, captured some videos and pictures, etc. Controls over buttons amazed me. Camera was good (I didn't have access to pc to compare in detail, but lower volume of photos was apparent, it could be because of higher compression or else), better than stock (except for interface!). Long story short, I came back to stock just for one thing, the ringtones. It looked like that there is some problem with their properties which is preventing usability. Rest is pure awesome.
P.S. (about stock packages) offline ota updates provided by @THMSP (specifically 488L for 488K!) don't seem to work. Also 5.15x firmwares (above 5.150) have problems in their system image file. Their offline updates don't seem to work either.

emufan4568 said:
The boot command does not work for the Nokia 8. You have to flash T-virus TWRP, then flash OpenGApps, reboot to download mode again and then type "fastboot format userdata" to prevent the Google Setup from crashing. Please read the whole thread before asking any questions
Click to expand...
Click to collapse
what's fastboot command to install TWRP, I don't know how to install it.

dongvatm said:
what's fastboot command to install TWRP, I don't know how to install it.
Click to expand...
Click to collapse
You need to use the :raw tag with flash. Running fastboot flash:raw boot_a twrp_treble.img work for me

Arashone said:
So... I used the rom for a few hours, played with settings, captured some videos and pictures, etc. Controls over buttons amazed me. Camera was good (I didn't have access to pc to compare in detail, but lower volume of photos was apparent, it could be because of higher compression or else), better than stock (except for interface!). Long story short, I came back to stock just for one thing, the ringtones. It looked like that there is some problem with their properties which is preventing usability. Rest is pure awesome.
P.S. (about stock packages) offline ota updates provided by @THMSP (specifically 488L for 488K!) don't seem to work. Also 5.15x firmwares (above 5.150) have problems in their system image file. Their offline updates don't seem to work either.
Click to expand...
Click to collapse
Ringtones, Headphones and NFC have been fixed. New build will be up soon

Awesome work man! I have a suggestion, make a modified T-virus with LineageOS bundled with it. I'll start working on AIO 2.0 for Treble soon

Suggestion: Use Google Drive to upload rom files. Github is painstakingly slow af for me, while others work just fine. Please do something about that

My wifi will not work, installed following instructions works fine except for wifi. Phone is TA-1012

New release is up! Download from here: https://github.com/GPUCode/android_device_nokia_nb1/releases/tag/v1.1 Fixes include:
* Headphones
* Ringtones
* Bluetooth audio
* NFC
Now the release comes with a TWRP flashable package. The thread has been updated with new installation instructions