Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://drive.google.com/file/d/1lalt4mZAx6x2GKws7OYvECzso7XDPuAp/view?usp=sharing
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
recovery-3.2.1-nx563j_7.x-8.x https://drive.google.com/file/d/1I5lrwwKKFKlE3LFf1Xh1p4GeU6ZW3Dy-/view?usp=sharing
please delete fingerprint and re-add
failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED
diiikaaaa said:
failed update via twrp...
Error : 7
EDIT :
Flash via updater ===> SUCCEED
Click to expand...
Click to collapse
Does all work?
I think you are right as it is the pre-released stock rom, it should upgrade from 4.16.
you can flash it directly from TWRP if you remove from the updater script of the 4.16-5.06 zip file all thel lines before this statement: # ---- start making changes here
It works.
I've attached here below a working script.
kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
-------- flash the Nubia UI v506 by TWRP https://1drv.ms/u/s!AqD4NQPahcDKhj7OCrH2a1qL7_eW
Click to expand...
Click to collapse
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks
Zenuno said:
Hi there
How about Gapps? Could you install them in this ROM? If yes, how can you do it?
Thanks
Click to expand...
Click to collapse
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
How about Magisk?
Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?
kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
backboycn said:
First of all, thank you for sharing your experiences on this rom.
Do you use Superuser or Magisk to root? I want to use Magisk to root device. By use of your updater script, we should be able to flash three zip at same time in TWRP
- 4.16 flashable zip
- 5.06 update zip
- Magisk.zip
Do you think it works?
Click to expand...
Click to collapse
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....
"This item might not exist or is no longer available"
is what I'm getting with first link?
would anyone be so kind to post some fresh links? downloads aren't working.
I got. The same prob. Then i use one drive app and it works
---------- Post added at 03:17 AM ---------- Previous post was at 03:15 AM ----------
aljoscha81 said:
I got. The same prob. Then i use one drive app and it works
Click to expand...
Click to collapse
pico gapps worked fine with method to edit setupwizard.apk - no magisk though , pretty sure can report magisk fails to https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589/page558
looking at the end of thread i think many experiencing no magisk issues
---------- Post added at 11:39 AM ---------- Previous post was at 11:00 AM ----------
kenzo_cz said:
Nubia UI v4.16 https://1drv.ms/u/s!AqD4NQPahcDKhkLOwY7JdwgW1csH
and the beta version Nubia UI v506 based android8.1 https://1drv.ms/u/s!AqD4NQPahcDKhkBLpdIj5OC3OKVT
--------first update to Nubia UI v4.16
--------update to Nubia UI v506
please delete fingerprint and re-add
Click to expand...
Click to collapse
Hi and thanks, any chance you managed to get magisk working ?
---------- Post added at 11:43 AM ---------- Previous post was at 11:39 AM ----------
Topogigi said:
I managed to install opengapps full by removing some apps with the aid of the gapps-config.txt file (otherwise system partition is too little - just check how to use it in the OpenGapps wiki). Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb (the nubia setup wizard does not start if the google setup wizard is active). Finally I rebooted and added my google account. So far, so good.
Click to expand...
Click to collapse
as there is currently no working magisk can I ask if this method to change apk to sav works for any app? At least I could debloat the ROM a little ....
for those that couldn't get the update file: this download wil work for 1 week only
https://we.tl/GRKgolmX2D
Went back to lineageos... Couldn't get gapps to work... After reformating data partition phone only booted to bootloader, couldn't get back in the os...
Topogigi said:
I did it the same way. Four zips in a row (including gapps modified accordingly my previous post). Then I rebooted. BTW, I use magisk
Uh oh, it seems I spoke too early....Magisk manager installs fine but it does not allow to do anything. Actually investigating the cause....
Click to expand...
Click to collapse
Everything now return to stock and I want to flash TWRP, but cannot connect with computer. The driver is not working. When I do fastboot device, it shows waiting for device. My operation system is win 10. Does anyone share a driver to me?
Thank you.
Got anybody information about is project treble in this rom?
aljoscha81 said:
Got anybody information about is project treble in this rom?
Click to expand...
Click to collapse
no... project treble checker says it's missing the A/B filesystem, so it's not ready for Treble
Could give us a little more details on how to do this: "Then I disabled SetupWizard.apk renaming it SetupWizard.sav in /system/priv-apps via TWRP and adb "?
Thanks
---------- Post added at 08:34 PM ---------- Previous post was at 08:01 PM ----------
If it is not asking too much, share also the modified gapps.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
-Based on J710FXXU3BQI8
-Security patch 2017-8-01
-Fully Deodexed
-Highly debloated, 560MB Only!!!
-Knox stuff removed
-Disabled Encryption & DM Verify for system
-Disabled Knox related stuff in build.prop
-Not Rooted, flash your desired root
ChangeLogs:
V2.0
-Added couple of apps back
-Fixed some bugs "hopefully"
-Added back some data/volte apks
-Updated ROM base to XXU3BQI8
V1.0
-Initial Release
Installation instructions:
-Download the ROM
-Wipe Data ,Cache Partitions
-Flash the ROM
-Flash ROOT ZIP, SuperSu or Magisk
Download:
V2.0
Drive
V1.0
Drive
Mega
Screenshots:
Note for Indian users: i dont know if volte will work or not, but files are already in the ROM
Another Note for users with other models, J710M/FN or any other model with the same chip, please buckup everything before trying to flash the ROM, i tried it on SM-J710FQ everything works fine so far
Enjoy :victory:.....
XDA:DevDB Information
Prism Barebone, ROM for the Samsung Galaxy J7
Contributors
AL_IRAQI
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: XXU3BQI8
Based On: Stock TW
Version Information
Status: No Longer Updated
Current Stable Version: V1.0
Stable Release Date: 2017-11-10
Created 2017-09-10
Last Updated 2017-12-22
Removed Apps
Removed Apps ZIP's:
Drive
Mega
Download other Samsung apps from their store or from the playstore here or apkmirror or sammobile
Reserved
Stock Images
Download Folder
Drive
Mega
Flash it with Odin
Note: its for SM-J710F model only, double & triple check your model before flashing, im not responsible for possible brick that happens when you flash it on the wrong model
Notes & Fixes:
Notes:
- Do not ask for AROMA
- Do not qoute OP
Fixes:
-GPS fix in attachments
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
maurce249 said:
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
Click to expand...
Click to collapse
Mods like what ?
Always wanted a ROM this debloated!!!! Awesome
awesome
great work again thanks ?
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
parthopagol said:
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
Click to expand...
Click to collapse
Try out CSC Expert
AL_IRAQI said:
Mods like what ? [/QU
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Great guidelines sir..excellent
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
maurce249 said:
AL_IRAQI said:
Mods like what ?
Click to expand...
Click to collapse
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Ill take a look, but chill with dem caps
parthopagol said:
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
Click to expand...
Click to collapse
Hmm, flash SimToolKit from removed zips
AL_IRAQI said:
Ill take a look, but chill with dem caps
Hmm, flash SimToolKit from removed zips
Click to expand...
Click to collapse
ok
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
I dont know but try flashing SamsungAntiRootRemoval
https://build.nethunter.com/samsung-tools/samsung-antiroot-removal/
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
Hey, System is mounted as read only by default, that is why you can remove or move stuff in there sometimes, try removing stuff from twrp
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
You have to disable boot verification & device encryption after flashing root, use this zip
you have to wipe your storage from twrp also after flashing this zip
trouble sending text messages
Message application doesn't work correctly
Can't send text messages. Sorry for my bad english >.<
youtube watch?v=7JWgOaR3c9c
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am sharing my kernel/boot.img, which is build from Sony Open Source/Qualcomm/ and android source (Very close to Stock KERNEL). Designed to keep balance security/ with high Performance and battery life.
Code:
###Disclaimer###
I am not responsible for any damage, broken or boot looping.
Please read the instructions and notes before flashing anything. Don't ask me if you don't read the instructions.Please respect and try to help each other. You may face sometimes that I cannot answer your questions/or answer your questions a bit later. I am busy with my work and don't have enough time to read and answer all your questions at the same time.
DONATE ME HERE
DONATE-HERE
##############################
Requirements-
##############################
- A working driver for your device.
USB drivers for Xperia devices
- Unlock bootloader
- A Working TWRP-with latest patch security
- YOUR firmware must match my kernel version. I used to update the kernel with latest firmware.
- Backup your stuff for future
- YOU NEED a refresh stock ROM (means you have to wipe EVERYTHING). Use flashtool to flash the latest firmware. (Remember to check Wipe USERDATA in flashtool). It seems not necessary if you have already flashed my kernel and have a working camera
- USE LATEST FLASHTOOL VERSION TO FLASH THE LATEST FIRMWARE
- (DOWNLOAD FROM HERE:- LATEST FLASHTOOL)
##############################
Features 11/3/2019
##############################
- Based on latest kernel source VERSION = 4, PATCHLEVEL = 4, SUBLEVEL = 148 (LATEST-47.2.A.8.24) March, 2019
- Up to date with latest security update—March 2019
- Hide verifiedbootstate from /proc/cmdline in order to fix the failed SafetyNet CTS check(It can still fail through other means)-GOOGLE PAY WORK
- Remove verifiedbootstate flag from /proc/cmdline - Disable CRC check
- Support wireguard VPN protocol
- dm-verity removed
- Sepolicy is patched for latest Oreo (deodex ROMs)
- Camera works without any patch
- Scheduler optimize/support for heterogeneous multi-core. Battery efficiency
- Energy Aware Scheduling (EAS) feature is enabled/optimize energy consumption for advanced multicore SoCs
- Multi-core scheduler enable/optimized
- Update and add Qualcomm PM driver/APM driver updated reduce battery usage during sleeping
- A lot subsystems converted to use power efficient workqueues
- CAF improvements and optimized
- Enable latest energy aware scheduling patches
- Enable workqueue power-efficient mode by default
- Several other patches to improve the speed and battery usage
- Tweaked/optimized the scheduler to balance the load across all CPUs without any regards to the power costs
- Tweaked the scheduler to reduce/save power by scaling down the frequency of the CPUs or idling them,
- Tweaked to predict the best time to save power on the CPU without affecting performance
##############################
Instructions-
##############################
Code:
- adb devices
- adb reboot bootloader
- fastboot devices
- fastboot flash boot boot.img (flash kernel/boot.img)
- fastboot reboot
- THIRD BOOT YOUR DEVICE INTO TWRP-RECOVERY AND ENSURE/CHECK THAT ALL POSSIBLE PARTITIONS ARE IN MOUNT OPTIONS
- NOW FLASH 2-patching.zip THEN 3-LATEST Stable Magisk
(DOWNLOAD FROM HERE:-LATEST MAGISK)
- NOW ENSURE THAT MAGISK MANAGER IS WORKING
- FINALLY BOOT INTO TWRP-RECOVERY AND FLASH 4-kernel_permissive.zip WITH WIPE DALVIK & CACHE
- YOU CAN ALSO FLASH 4-kernel_permissive.zip FROM MAGISK MANAGER
- OPEN MAGISK MANAGER AND FIND/OPEN MODULES
- PRESS /HIT THE PLUS + SIGN AND FIND THE PATH OF THE 4-kernel-permissive.zip
- NOW IT WILL INSTALL THE ZIP AND REBOOT
- DONE AND ENJOY
##############################
Downloads
##############################
XPERIA-XZ1 Compact(G8441)-LATEST-47.2.A.8.24-(11/March/2019)
##############################
XPERIA-XZ1 Compact(G8441)-ALL-BOOT IMAGES-[KERNEL][DRM-PATCHING]
##############################
Source/GitHub
##############################
Kernel-source
-47.1.A.12.xxx
https://github.com/Nexusma/msm-4.4
https://github.com/toffyjan/android_kernel_Sony_lilac_poplar
https://github.com/sonyxperiadev/device-sony-lilac
IF YOU LIKE MY WORK AND WANT ME TO CONTINUE, THEN DON'T FORGET TO BUY ME COFFEE
DONATE ME HERE
DONATE-HERE
Special Thanks To:
If you can, donate and respect all the devs
@Chainfire for his great work to achieve root SuperSU
@modpunk for TWRP-recovery 3.2.1-0 and drm-fix THANK YOU
@Androxyde for Flashtool. merci beaucoup pour tout
@munjeni for his great knowledge and tools for extracting SIN images
@sToRm// for his effort on DRM work, THANKS
@SuperR. for SuperR's Kitchen , THANK YOU
@M-Rom Thanks for sharing drm-fix and patch
@serajr Thanks for DRM Fix Workaround and Sony RIC disabler
THANK YOU SONY FOR SUPPORTING DEVs AND ALLOWING US TO UNLOCK THE BOOTLOADER
Thanks to XDA And everyone else who share their knowledge and works among us in xda.
Reserve for future
Dont can download, not loading from mega
---------- Post added at 06:35 AM ---------- Previous post was at 06:28 AM ----------
and will the magisk work with this boot?
alximiktik said:
Dont can download, not loading from mega
---------- Post added at 06:35 AM ---------- Previous post was at 06:28 AM ----------
and will the magisk work with this boot?
Click to expand...
Click to collapse
Links are fixed now.. I patched the boot.img..So it should work with magisk.
Thanks. Is it your work?
---------- Post added at 07:19 AM ---------- Previous post was at 07:05 AM ----------
I did not understand what zip flash through twrp? what a difference between them. and can I also separately boot through a twrp?
alximiktik said:
Thanks. Is it your work?
---------- Post added at 07:19 AM ---------- Previous post was at 07:05 AM ----------
I did not understand what zip flash through twrp? what a difference between them. and can I also separately boot through a twrp?
Click to expand...
Click to collapse
What question is this? It is your work.
janjan said:
What question is this? It is your work.
Click to expand...
Click to collapse
it's you made a boot?
alximiktik said:
it's you made a boot?
Click to expand...
Click to collapse
Why do you think it is not my work, since you are asking if I made this boot?
janjan said:
Why do you think it is not my work, since you are asking if I made this boot?
Click to expand...
Click to collapse
I do not think. I'm asking if you did or did not?
I tried to install magisk, but got bootloop.
alximiktik said:
I do not think. I'm asking if you did or did not?
I tried to install magisk, but got bootloop.
Click to expand...
Click to collapse
Why should I upload something, if it is not my work? Which one did you flashed?
janjan said:
Why should I upload something, if it is not my work? Which one did you flashed?
Click to expand...
Click to collapse
the first one, but only boot.img Sony_XZ1_Compact_Kernel_16_jan_2018-kernel.zip
supersu works great
alximiktik said:
the first one, but only boot.img Sony_XZ1_Compact_Kernel_16_jan_2018-kernel.zip
supersu works great
Click to expand...
Click to collapse
I mentioned that I patched the boot.img and it should work with magisk. You should use the patched one with magisk.
janjan said:
I mentioned that I patched the boot.img and it should work with magisk. You should use the patched one with magisk.
Click to expand...
Click to collapse
no difference, with magisk bootloop. I tried several times. Only with supersu
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
I flash only boot , from twrp. Maybe I'm doing something wrong?
I installing 14.5 magisk.
---------- Post added at 08:45 AM ---------- Previous post was at 08:36 AM ----------
Sory for my english. I my native languages Armenian and Russian
alximiktik said:
no difference, with magisk bootloop. I tried several times. Only with supersu
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
I flash only boot , from twrp. Maybe I'm doing something wrong?
I installing 14.5 magisk.
---------- Post added at 08:45 AM ---------- Previous post was at 08:36 AM ----------
Sory for my english. I my native languages Armenian and Russian
Click to expand...
Click to collapse
- Download the patched zip from first thread and the latest magisk.zip from XDA.
- Move both zips to your device and boot into TWRP
- Flash the patched zip first and then flash the latest magisk.zip
janjan said:
- Download the patched zip from first thread and the latest magisk.zip from XDA.
- Move both zips to your device and boot into TWRP
- Flash the patched zip first and then flash the latest magisk.zip
Click to expand...
Click to collapse
all successfully installed and booted into the system. But in the magisk does not pass the safetyNet test. The system update has arrived. After the upgrade I will try to install the kernel and magisk into a clean system.
I requested a new firmware. Made a complete wipe.
Without switching on the device
1. I installed twrp
2. patched Patched-SONY-XZ1-Compact / [G8441]
3, Installed msgisk.
Bootloop
Wihout magisk -bootloop
Why?
47.1.A.12.34
Does your kernel include busybox and Sony RIC disable?
Thanks you janjan !
It's a great new, really appreciate your work !
Braindeadz said:
Thanks you janjan !
It's a great new, really appreciate your work !
Click to expand...
Click to collapse
Did this core work for you? I have a bootloop...
tolya-666 said:
Did this core work for you? I have a bootloop...
Click to expand...
Click to collapse
I will test when I come back home :/ can't help you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
POST KANGED FROM ERFAN :highfive:
Android "Q" is the upcoming ninth major version of the Android operating system. It was first announced by Google on March 2019, and the first developer preview was released on the same day. The second developer preview is expected to be released at the next Google I/O developer conference.
Support Group @ Telegram
Known issues
Well, these issues are not that annoying after all.
No In-Call Audio Through EarPiece
Installation instructions
Basic (LOL) :
1.Install Q GSI (Through TWRP or Fastboot)
2.Flash Patch (Or Patch + GMS & skip Step 4)
3.Boot
4.Install GMS
5.Run
Code:
adb shell sm set-isolated-storage off
Through ADB
6.Done
Downloads
- (Always Download Latest AB Pixel) GSI
- Patch
- Patch + GMS
- GMS
XDA:DevDB Information
Q for A2 Lite, ROM for the Xiaomi Mi A2 Lite
Contributors
Ramyski, erfanoabdi, lucienbl
ROM OS Version: 9.x Pie
ROM Firmware Required: Stock 10.0.8
Based On: Pixel Stock
Version Information
Status: Beta
Current Beta Version: 3
Created 2019-05-16
Last Updated 2019-05-16
That's so cool.
What are the features can I add screenshots please
I can't do his experiments this week.
Thank
You're the best.
cant boot. still bootlooping
Luminoux said:
cant boot. still bootlooping
Click to expand...
Click to collapse
Did you flash the fixes?
the patch files gave error 6 while trying to flash in recovery.
so this is what i did:
1. unzipped the patch+gsm file.
2. flashed system, boot and splash in fastboot.
3. deleted the mentioned files to delete manually from recovery.
4. pushed the mentioned files to add by adb.
5. pushed encryptable fstab.qcom file by adb.
and booted ....... voila its Q
Screenshots?
masumrussell said:
the patch files gave error 6 while trying to flash in recovery.
so this is what i did:
1. unzipped the patch+gsm file.
2. flashed system, boot and splash in fastboot.
3. deleted the mentioned files to delete manually from recovery.
4. pushed the mentioned files to add by adb.
5. pushed encryptable fstab.qcom file by adb.
and booted ....... voila its Q
Click to expand...
Click to collapse
How to do that ?
I have same issue error code 6
iboyshanto said:
How to do that ?
I have same issue error code 6
Click to expand...
Click to collapse
well didnt i just described how to do it?
---------- Post added at 12:39 AM ---------- Previous post was at 12:34 AM ----------
teco10 said:
Screenshots?
Click to expand...
Click to collapse
well this isnt stable yet, plus theres no incall audio, and it doesnt boot twice so just kept the splash.img and bootanimation.zip and went back to my old rom. i know its heartbreaking, i got the preview before installing the gsi, thought as its mentioned for a2lite and there were fixes, its gonna work.
but still thanks for the preview.
---------- Post added at 12:47 AM ---------- Previous post was at 12:39 AM ----------
well if anyone still want to get the preview, this is what i did,
fastboot flash vendor vendor.img (10.0.8 vendor)
fastboot flash system system.img
unzip the patch+gsm.zip
fastboot flash boot boot.img
fastboot flash splash splash.img
fastboot boot twrp.img (boot to recovery)
open the updater script file (i hope you know where to find it in update zip.)
check which files are to be remove and delete theme from file manager of twrp.
adb push system (unziped system folder location) /system
adb push vendor (unziped vendor folder location) /vendor
adb push data (unziped data folder location) /data
reboot to system
masumrussell said:
well didnt i just described how to do it?
---------- Post added at 12:39 AM ---------- Previous post was at 12:34 AM ----------
well this isnt stable yet, plus theres no incall audio, and it doesnt boot twice so just kept the splash.img and bootanimation.zip and went back to my old rom. i know its heartbreaking, i got the preview before installing the gsi, thought as its mentioned for a2lite and there were fixes, its gonna work.
but still thanks for the preview.
---------- Post added at 12:47 AM ---------- Previous post was at 12:39 AM ----------
well if anyone still want to get the preview, this is what i did,
fastboot flash vendor vendor.img (10.0.8 vendor)
fastboot flash system system.img
unzip the patch+gsm.zip
fastboot flash boot boot.img
fastboot flash splash splash.img
fastboot boot twrp.img (boot to recovery)
open the updater script file (i hope you know where to find it in update zip.)
check which files are to be remove and delete theme from file manager of twrp.
adb push system (unziped system folder location) /system
adb push vendor (unziped vendor folder location) /vendor
adb push data (unziped data folder location) /data
reboot to system
Click to expand...
Click to collapse
And what have you flashed ?
titimar16 said:
And what have you flashed ?
Click to expand...
Click to collapse
well isnt it the thread for Android Q dev rom? what else should i talk about to flash other than this.....
Please fix it, it's amazing to get rom before anyone else
And please let me know which one is the most stable custom rom ? I am new in this device !
can someone link 10.0.8 vendor?
Hey, can someone give me *precise* installing steps?
installed q. did everything how masumrussell described, but everything i got is every 3 seconds flashing grey - black screen
are Gcam fix included?
FlymeOS on daisy?
Can I install FlymeOS GSI image on MI A2 Lite using these gsi installing methods?
Madatte said:
installed q. did everything how masumrussell described, but everything i got is every 3 seconds flashing grey - black screen
Click to expand...
Click to collapse
I have the same problem. Help!
fixed idk how
Hey, I am stuck at the boot animation. Can somebody help?
Also, everytime I boot up I need to boot through fastboot boot boot.img or else I am getting the "System has been destroyed" error. Any fix? fastboot flash boot boot.img and fastboot flash aboot aboot.img didn't help.
Madatte said:
installed q. did everything how masumrussell described, but everything i got is every 3 seconds flashing grey - black screen
Click to expand...
Click to collapse
any solution?
There's an update for Q beta 5 preview, may it work too?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not responsible for whatever damage this could possibly cause to your device.
Updated with latest Havoc release : 28/01/20
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/development/recovery-twrp-galaxy-a50-t3916199
Rom GSI download link : https://sourceforge.net/projects/ex...-OS-v3.1-20200111-ARM64AB-GSI.img.xz/download
Please download this file and don’t download last havoc 3.1 release because it should no work.
Thanks to ExpressLukeGSI, phh, havoc for this project.
1. Format Data + Wipe all
2. Power Off + Go back to Recovery TWRP
3. Flash System img
4. Power Off + Go back to Recovery TWRP
5. Resize the system partition, in TWRP go to
Wipe Advanced Wipe Select System Repair or change file system Resize file system
6. Flash these gapps : https://easyupload.io/llnivj
7. Then mount vendor + system and flash this fix in TWRP : https://easyupload.io/8se2a7 (It will fix overlay and dualsim)
Issue knowed :
Fingerprint doesn't work
MPT not working
ROM OS Version: 10 Q
Security patch : January 2020
ROM Firmware Required: TWRP Recovery
Version Information
Status: Stable GSI
Last Updated 2020-01-28
Eek, it's finally happening, Testing this asap... just cause I can why the hell not
---------- Post added at 06:58 AM ---------- Previous post was at 06:29 AM ----------
Installed and up and running. Tested on FN variant
Voniaak said:
I'm not responsible for whatever damage this could possibly cause to your device.
First you will need to have TWRP :
Please follow this guide : https://forum.xda-developers.com/galaxy-a50/how-to/[email protected] meliohe
Rom GSI download link : https://bit.ly/2m9Wk3y
Official Thread : https://forum.xda-developers.com/pr...bled-device-development/gsi-havoc-os-t3930030
Thanks to Vincent, phh, havoc for this project.
Guide :
1. Wipe all
2. Flash System img + Flash DM
3. Power Off
4. Go back to Recovery TWRP
5. Resize system
6. Flash these gapps : https://filebin.net/9hgskxxbr7hdi27r/open_gapps-arm64-9.0-pico-20190126.zip?t=2z9sttui or https://drive.google.com/file/d/1nS2z4emxHovZ0x3CqXl59r8oBqx9DiPU/view
7. Delete bootanimation from TWRP in System/System/Media/Bootanimation.zip
8. Power Off wait 2 reboot and its done
Issue knowed :
Fingerprint doesn't work
Magisk does'nt work
Instead of these issue it's okay !
Many thanks to @muhamet for give me video and guide
Click to expand...
Click to collapse
Nice job my frend
Fyi, another issue for the list:
Dual Sim is not working
Add issues : Changing default USB configuration reboots phone
Brightness bar is buggy AF
sound is lesser than stock
However , nice to see projects for our device .
Thumbs up !
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Voniaak said:
O thank you, sound is ok for me!
And battery life better on havoc than one ui
Click to expand...
Click to collapse
Yes it is better
Also, Magisk is working for me
I flashed the zip with TWRP and when powering the phone on I was holding down the volume up and power and let go of both immediately when the screen turns on.
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Agil1ty said:
So does the hotspot function work? No issues with WiFi or 4g? No Bluetooth issues? Hope to hear from you.
Click to expand...
Click to collapse
No issues
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Agil1ty said:
So for me, flashing TWRP gave me the TWRP background but no menu. Any idea what I’m doing wrong?
Click to expand...
Click to collapse
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Ain't able to flash
Hello everyone. One quick question.
When I try to install the ROM image in TWRP, the device will restart on it's on. Any ideas of what the problem could be?
I tried to reistall samsungs firmware, reistall TWRP recovery and retry to intall the ROM but no luck.
Thnaks in advance for the replies...
Cheers,
F
AjayL13601 said:
Ah, this means the device is encrypted. Before installing TWRP make sure to wipe data/cache and after its installed through Odin make sure you immediately go into TWRP, don't let it boot first. When your in TWRP make sure to flash the decrypter before booting up.
Look at the TWRP recovery steps again just double check.
---------- Post added at 01:39 AM ---------- Previous post was at 01:36 AM ----------
Also, I thought tripping Knox was permanent, after checking Knox being tripped in this OS, as expected it was tripped, however after reinstalling stock firmware (rooted version) Knox is now nolonger tripped.
Click to expand...
Click to collapse
Thank you, this really helped. FInally got it to install. However, sometimes after using some apps the phone becomes really slow and sluggish (most noticable after using video apps, like youtube). Does anyone else also see this behaviour? I had to reboot the phone to get back to normal.
So far i really like the rom, everything I use works (bluetooth, hotspot, wifi, 4g, camera).
Has this ROM been modified specifically to work with our device or is it stock project treble?
AjayL13601 said:
Has this ROM been modified specifically to work with our device or is it stock project treble?[/QUOTE
Project treble
Click to expand...
Click to collapse
Huhhh, interesting, in that case I'm gonna try some other project treble roms
AjayL13601 said:
Huhhh, interesting, in that case I'm gonna try some other project treble roms
Click to expand...
Click to collapse
Not all treble ROMs working. Try PE working
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Voniaak said:
Guide updated :
Updated Havoc GSI : Q icons !
Magisk and Faceunlock now works!
Click to expand...
Click to collapse
How to update?
Unofficial OrangeFox Recovery Project R10.1 for JOAN / LG V30
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device tree : android_device_lge_joan-twrp
Kernel source : android_kernel_lge_msm8998
OrangeFox source : OrangeFox
Known bugs :
You tell me?
Flashlight doesn't work (disabled anyway)
Protect recovery itself with a password works only when not encrypted (maybe in a future version with encryption enabled too)
Working: :
Everything else:
backing up and restoring
decryption and therefore usage of internal storage in recovery
flashing zips
removing crypto
...
FoxRecovery features :
Very fresh UI
Based on latest TWRP, with a lots of additions
Lot of useful file manager features (uncompress, compress, display text files, ...)
Built-in support for installing/removing Magisk and managing installed modules
Built-in support for installing init.d functionality
Built-in all the zip files needed for our V30, they are copied to /sdcard/Fox/FoxFiles
Customizations : lockscreen, password, status bar, ...
Theme engine
Updated with latest TWRP commits
Support for Custom ROMs
Better language support
Optimized versions of community scripts
Fox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
Alternative lockscreen
And many more!
Additional :
Used busybox instead of toolbox for increased zip compatibility
Used magiskboot 20.3 instead mkbootimg for all kernel operations: better, but a bit slower, according to OFox Team
Screenshots : Look here
F2FS support
Added "reboot to EDL" button (not working, removed in next version)
Updated Magisk and magiskboot binaries to latest 20.3
Included RCTD remover zip
INSTALLATION:
Backup your ROM, your data, your internal storage, and your settings/apps, to an external device: just to be on the sure side, as always
Download the OrangeFox zip file to your device
Reboot to your TWRP Recovery
Install the OrangeFox zip file as a normal zip
The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
After rebooting have a look at your sdcard in FoxFiles folder: you will find all the necessary files to flash for getting your V30 running flawlessly after kdz-ing there (RCTD remover, Magisk, unroot Magisk, disable dm-verity and force_encrypt, lockscreen settings remover (when userdata with lockscreen settings is restored) and init.d support; most of them not needed (beside magisk maybe) if a TWRP flashable firmware zip was used)
Also have a look at Menu -> Fox Addons, App Manager and Magisk Manager
Enjoy!
Credits :
The main contributors : @MrYacha & @DarthJabba9
The OrangeFox Team for all the work
All the testers in our Telegram LG V30 Recovery group
TeamWin for TWRP
Informations and Downloads:
Status : RC3
Created : 2020-02-23
Downloadlink: 2nd post :good:
RC3 Build from 2020-02-23: (latest)
2nd build, changelog over RC2:
- corrected blocksize for formatting crypto related partitions
- included timezone data, maybe helps some ppl with time still not showing correct; should speed up time calc
- used pre-compiled full mke2fs and e2fsdroid binaries
- enabled ntfs experimental support (rw in kernel, NTFS_3G flag in twrp / ofox)
- minimal tweaks
- ofox zip will not patch for dmverity/forceencrypt anymore automatically when flashing it
- nano editor should be included (command line editor)
- log history on sdcard disabled: no more millions of logfiles, only the last one
- recovery security lockscreen is working now, but only when userdata is not encrypted. if it is, the recovery login screen will just disapper after waiting a short period of time
- changed an error message for less confusion (crypto related)
Download:
OrangeFOX Recovery R10.1, link to MEGA, RC3
RC2 Build from 2020-01-18:
- initial public release, see first post
Download:
OrangeFOX Recovery R10.1, link to GDrive, RC2
Screenshots and more
Screenshots : Look here
ToDo:
- bring in flashlight...? hmm...
- maybe add vibration
Thanks. Love the UI. It's really good!
Work on Q？
Zen Zero said:
Work on Q？
Click to expand...
Click to collapse
needs testing system is mounted in /system/system when using a q rom, but that's all i know
Got some screenshots? Sounds interesting. Maybe a feature comparison with vanilla TWRP?
Zen Zero said:
Work on Q？
Click to expand...
Click to collapse
Worked fine when I restored my Q ROM backup. Didn't try flashing a new ROM though.
---------- Post added at 12:43 PM ---------- Previous post was at 12:42 PM ----------
TPMJB said:
Got some screenshots? Sounds interesting. Maybe a feature comparison with vanilla TWRP?
Click to expand...
Click to collapse
Here's the link of screenshots from the 1st post: https://files.orangefox.tech/Screenshots/R10/
A lot of features are mentioned in the 1st post too
TPMJB said:
Got some screenshots? Sounds interesting. Maybe a feature comparison with vanilla TWRP?
Click to expand...
Click to collapse
boot normal but i dont know if there are bugs
Only bug I found so far is that I can't change the splash screen in customization options.
iirc i've already read something about this in r 10.1, yep; looks like ofox team need to fix this too
hooray!
---------- Post added at 07:10 PM ---------- Previous post was at 07:08 PM ----------
seadersn said:
iirc i've already read something about this in r 10.1, yep; looks like ofox team need to fix this too
Click to expand...
Click to collapse
We changed nothing in R10.1 with splash customization. Looks like mkbootimg in your build is broken.
MrYacha said:
hooray!
---------- Post added at 07:10 PM ---------- Previous post was at 07:08 PM ----------
We changed nothing in R10.1 with splash customization. Looks like mkbootimg in your build is broken.
Click to expand...
Click to collapse
holla!
i was using OF_USE_MAGISKBOOT_FOR_ALL_PATCHES & OF_USE_NEW_MAGISKBOOT in rc2, but updated all magiskboot binaries to 20.3 0_o is it confirmed splash changing working with org bins? i may just try it tomorrow, earliest possible day to sit a bit on my pc again :good:
thx for feedback
seadersn said:
holla!
i was using OF_USE_MAGISKBOOT_FOR_ALL_PATCHES & OF_USE_NEW_MAGISKBOOT in rc2, but updated all magiskboot binaries to 20.3 0_o is it confirmed splash changing working with org bins? i may just try it tomorrow, earliest posible day to sit a bit on my pc again :good:
thx for feedback
Click to expand...
Click to collapse
Will this work for the H932?
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Will this work for the H932?
Click to expand...
Click to collapse
should behave the same as on other variants, maybe you can tell then if decryption works on this model too?
update, pls see first two posts :good:
I love this TWRP variant. Could you please update with latest twrp 3.5.0? Thanks in advance!
After flashing OFOX and adding security code to the recovery, it just wont accept my code. Just reboots
ianruto said:
After flashing OFOX and adding security code to the recovery, it just wont accept my code. Just reboots
Click to expand...
Click to collapse
Which ROM are you using? You didn't try to encrypt right?
You could try flashing twrp using adb as a workaround I guess