While playing audio on Car Stereo via A50's Bluetooth, The Audio got crackles and skips, even in receiving phone calls,
I have tried changes in developer options in Bluetooth menu, and also disabled battery optimization for Bluetooth but nothing changed :crying: Similar situation while playing in JBL Bluetooth speakers
At other side my old sony Xperia C3 D2502 is working awesome on same car Stereo.
Same problems
If you use powersaving mode disable it
Maybe the problem is from this option
You didn't mentioned which rom and baseband. I use BT with Anker BT headphones, Roidmi2S and used it with Roidmi1 and a Yatour Car unit without any crackles and pops. I'm on May update, XXUASE3, OXM CSC.
Related
So... I just recently installed a bt a2dp compatible stereo receiver in my car and when bluetooth audio is connected it sounds mediocre/ok.. BUT I remember several years ago on windows mobile phones being able to increase bitpool or something in the registry that largely improved a2dp sound quality .. I've been out of the loop on A2dp as of late .. is there any similar hacks or roms that provide higher quality a2dp? Anyone... anyone....
What type of headunit. I know that sony has the option when you adjust bass/treble, etc that a bluetooth option is available to boost the input via BT. I used that in my wife's vehicle.
It's a Kenwood Excelon receiver / KDC-x996 .. and I am able to adjust treble/bass on the headunit when connected via a2dp .. and it does sound ok.. but I remember when adjusting the bitstream/bitpool the audio quality would go from ok and flat to near cd quality .. it really was very noticeable.
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
I'm looking for the same thing. I can get audio through Bluetooth and have notifications go to speaker at the same time, but I can't get other media to go to speaker at the same time.
I would also be satisfied with a widget that lets me toggle the A2DP status of the Bluetooth connection on and off. It would not be the end of the world if I needed to toggle the A2DP off when I switch to another radio source and toggle back on when I go back to Bluetooth as the source in the car.
Sent from my Samsung Galaxy Note 2 using Tapatalk.
A2DP + phone speaker simultaneously
jalanjkcarp said:
The subject says it all. Can I route audio through Bluetooth A2DP and the phone's speaker simultaneously? I want to keep my phone connected to my car's audio system via Bluetooth voice and A2DP. But sometimes I want to switch to XM Radio or other sources. When I do that of course, I lose audio prompts from Google Navigation.
Is this possible?
Click to expand...
Click to collapse
If you ask me I'd say it's possible.Whenever my phone is connected to my stereo through A2DP, the music is played through loudspeakers only by default. However, when there's an incoming call and my ringtone is being played I can hear it through loudspeakers AND the phone speaker, which creates a pretty cool surround effect. I'd really love to make my music player interact with all the speakers like this all the time. I took my chance installing various apps like SoundAbout to help me figure it out, all to no avail. Any ideas?
I have a Moto z play, when I play the audio via Bluetooth speaker the audio suddenly gets transferred to my mobile headset and starts playing via headset even when the Bluetooth speaker is in connected state, I have to disconnect the device and reconnect it inorder to play the audio back on the Bluetooth device, does anyone else have the same issue ? Is this a software glitch or a defect with my headset itself ?
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
coyotefiveoh said:
The head set is a Bluetooth headset?? Your device probably recognizes that as a primary Bluetooth source and will connect to that first. Turn off the Bluetooth headset off and that will solve the problem....
Click to expand...
Click to collapse
Thanks for the replay. It's actually my mobile which starts playing the music instead of my Bluetooth speaker however the speaker is still connected to headset and I can control the audio play,pause and next options from the speaker but the sound comes out of my mobile speaker instead of the Bluetooth speaker the same happens with my Bluetooth headset. I have to disconnect the Bluetooth speaker and reconnect it to play the audio from it.
Hi,
This is a very annoying thing I am facing as I am an avid music listener and I love to listen to music in my wire free bluetooth headphone.
Everything was working fine until I upgraded to the official Nougat version from Marshmallow in my Lenovo p2 32GB/4GB.
The audio keeps stuttering and skipping for some mili secs every now and then while listening to music.
I have tested my bluetooth headphone with three other devices and it is working fine with them. I have also tested it two different music player : Google play music and pulsar plus. Both the cases the same problem is happening.
I did a factory reset also but that did not prevent the problem.
Also whenever I am connecting my blutooth headphone, the volume is automatically set to the highest.
Tried to unpair/pair my bluetooth device also, no luck.
The stuttering problem is not happening when I am playing video file via MX player with my bluetooth headphone or while listening to music with a wired headphone.
I took logs from developers setting dated 07/04/2017 :
https://drive.google.com/open?id=0B5ucK93ckWnBTUZqZkhUVF9GWEE --> Btsnoop_hci.log
https://drive.google.com/open?id=0B5ucK93ckWnBdEdKMUJTODRGdk0 --> Interective Bug Report.
Please let me know with a definite solution. This is making my life live harder with P2.
Regards,
Krishnendu
I have same problem with MM and now(with nougat) that 's better, all work fine but when i connect my headphone the sound is at minimum and i must turn volume higher manually on the phone but after, no problem!
Bluetooth Connection Failed With Car Audio System
hi every one
after i updated my lenovoo p2a42 to Nougat i could not connect with audio system in my car .. bluetooth connected to my laptop successfully .
any solution for this case? pls
thanks
Hi,
I just bought this watch, and I have a problem with my car Bluetooth connection.
The problem is that when I enter the car, the multimedia audio is set to car speaker, even if in the Bluetooth properties I disabled multimedia audio for this connection because I want that the audio remains on the phone.
Before this watch, I had an Android Wear watch and the car Bluetooth connection worked fine, the audio remained on the phone.
Since I have this watch the audio goes to the car speakers. If I enable and disable again the multimedia audio for the car connection properties then the audio correctly remains on the phone, but I have to do this every time.
Someone knows how I can make the audio remain on the phone?