Hello,
I broke my digitilizer and replace it with an lcd+touch unit from aliexpress, is suposted to be an "original"/oem instead of just a replacement, ~$70 instead of ~$35.
After replacement my screen it is extremely dim I just can barely see it on a dark room.
I didn't mess with the light sensor because I bought a replacement with the frame, so I think that is all assembled together.
Did anyone experience anything like this? Any suggestions how to diagnose the problem or is just a faulty lcd?
I can't remember is the hardware buttons lid up when pressed, can anyone tell me when and if the lid up.
Also the charge led light, when changing lid up all the white frame around the screen, is this normal?
Any past experiences or suggestions are welcome.
Thanks in advance
Hi everyone!
I bought a new display and a new fingerprint scanner. Now, on the old one the scanner was solidly glued to the screen. Does anyone have any ideas on how I should attach the new scanner to the new screen?
Like, is there thin double sides tape I could use? Just an example. On MIUI someone told me to use epoxy, would that block the ultrasonic fingerprint you think?
I attached some photo's, two are of the old scanner, still with some white display on it. it needs to be on the small glass windows in the other photo. The glass of the home-button on the old scanner is glues directly with some very thin-spread glue.
This is the new one I have:
https://www.aliexpress.com/item/New...-ID-Fingerprint-Sensor-Parts/32803906214.html
What would you think is the best way to attach a ultrasonic fingerprint scanner to a display?
Please think with me! Thank you so much
Just use some epoxy resin! You know, the one that comes in two parts, and you mix together.
Take one that hardens in 3-5 minutes, prepare only a little glue, you wont need more than an equivalent of a small coin.
Make a test first, take same quantity of each resin component and mix it gently for about 10 seconds,then apply it to something you don't care about (ex. the old broken screen, and glue the old sensor into it). Wait the required time and then check that it's nicely glued.
If you made the mix wrong it won't work well and may keep in liquid state.
Have some alcohol to clean (Alcohol for wounds works well), the epoxy cleans easily with it when it's liquid. But once it has hardened it will be a nightmare!
When you are about to glue the sensor on the new screen, apply some epoxy onto the sensor, making a uniform coating of about 0.3mm or so, no too much, but it must be a little in excess to fully fill the gap between the sensor and the screen.
I often use it to repair phones in special cases as this one, never had a problem!
I should go for UV glue, I think this is what they do on manufacturer.
Enviado de meu 2014819 usando Tapatalk
If you where buying on Aliexpress why didn't you just buy one that was already glued? It costs a couple of dollars more.
pr0x2 said:
If you where buying on Aliexpress why didn't you just buy one that was already glued? It costs a couple of dollars more.
Click to expand...
Click to collapse
Could you please share a link? I didn't find a screen with working fingerprint sensor that cost only a couple of dollars more
Hey, did it work? I mean the epoxy surely does work, but does the sensor function properly? I would be willing to pay those 100$ for the original screen, but all of them are out of stock, and 150$ is a bit too much That means I have to go the oem screen assembly route :/
My screen died in milkwater btw.
did you solve the problem? i have to do same process but i dont know how
same here.
looking for soolution
Did you solve the problem? did you try to glue the fingerprint sensor to the new lcd? Could you please tell us about your experience, I am in the same situation
I'm gonna be trying this, but it will be a month or so till I get my new screen.
Piciu256 said:
Hey, did it work? I mean the epoxy surely does work, but does the sensor function properly? I would be willing to pay those 100$ for the original screen, but all of them are out of stock, and 150$ is a bit too much That means I have to go the oem screen assembly route :/
My screen died in milkwater btw.
Click to expand...
Click to collapse
Where do all of you see screens for 100$??? Every OEM screen that I've seen on eBay runs from 50-70$ CAD so like 40-55$ USD
I looked in google and Aliexpress, I dont want an OEM screen- I want an original one, but noone sells it for a reasonable price. I found a original LCD with OEM digitizer though (40$), and thats what I went for. Just waiting for the package.
I bought the highest rated fingerprint sensor also, gonna report if it works.
@Piciu256 Tell us how is it going, how will you connect and if it works.
Could you please share the links and how long will it take for it to arrive to your house.
I can share some ideas with you.
I bought my screen assembly on Dragon Tt site, it's the "oem glass+original LCD" one, the fingerprint reader is this one: s. aliexpress. com/jemyIrQN
Should be 2 weeks tops till the LCD comes, then I'm going to use a standard 2 piece epoxy to assemble the thing, then the b7000 glue to attach the assembly to the frame.
Gonna report again after the fact if it went well.
Interested in this as well, following this topic . Just busted up my screen, the buttons and fingerprint scanner don't or barely work anymore.
Can someone recommend a good replacement screen, or is the dragon-tt the best option?
Thanks
I'm replace LCD and bought new fingerprint sensor. New sensor replce with b7000 blue, but fingerprint doesn't work.
Anybody know how to resolve this problem?
The sensor is bad or the b7000 glue is not appropriate for this operation (why you no use 2 part epoxy as sudgested?) either way you are fckd- you cannot remove the sensor without destroying it, and you probably cannot clean the surface well enough without damaging the screen to install a new sensor so no fingerprint for you.
My screen came in today, I'll report in 2 days if all works. @edit the epoxy is curing atm, its great because its so sticky- you just need to locate it in the beginning and not touch it for few hours, it makes its magic by itself- no need to anker anything down
The sensor didn't work for me either, tho that might be a case of my phone not working properly as the previous one wasn't working either.
The screen is great quality, the digitizer sticks up a little more than original though.
If you want to try yourself- use epoxy, it seems perfect for this use, the sensor is 5$ so it doesn't cost you anything
ps. Do any of you also experience this weird glitch in chrome that when I type something longish then the app takes up to 1,6GB (I believe the system doesn't grant more) RAM and freezes? (this post was enough to freeze twice and crash)
Hey guys, someone replace fingerprint and works fine? I'll paste mine What do you use for this? epoxy is safe?
thanks
Piciu256 said:
The sensor didn't work for me either, tho that might be a case of my phone not working properly as the previous one wasn't working either.
The screen is great quality, the digitizer sticks up a little more than original though.
If you want to try yourself- use epoxy, it seems perfect for this use, the sensor is 5$ so it doesn't cost you anything
ps. Do any of you also experience this weird glitch in chrome that when I type something longish then the app takes up to 1,6GB (I believe the system doesn't grant more) RAM and freezes? (this post was enough to freeze twice and crash)
Click to expand...
Click to collapse
does the homebutton function work tho?
Hello everyone!
Recently i cracked the screen glass on my 5X. Normally it's not a very bothersome crack, but it goes right through the middle of the camera and makes it practically useless, so i'm planning on replacing the screen assembly, probably ordering it from aliexpress. Do any of you know of a certain "brand" i should be avoiding? Any feedback on the subject is appreciated!
I just bought mine yesterday on amazon, take a look
https://www.amazon.it/LL-TRADER-Dig...5x+schermo&dpPl=1&dpID=51-1sEoSyOL&ref=plSrch
Hello and sorry for my bad english recently i trade my Redmi Note 7 4/64 for a pixel 2 xl with cracked glass near to front facing camera. Well i went to my local service and asked if there is chance to replace only glass he told me NO, to replace the glass only need oca machine and etc. Also we saw the front camera lens at microscope and it has scratches which effect the quality....well i have found some tempered glasses that they cover the whole front camera (because mine has no glass at front camera its empty ) and buy a new camera but i dont know if they quality is the same as the original (maybe i will buy it from aliexprress for about 10 euros) also will it take dust if i put the temptered glass? it will be like it has glass will effect the quality? sorry again any other suggest is allowed
I recently traded and got a Google Pixel 2 XL. The phone's screen is severely damaged and the front camera has broken glass all in it. There is a Crack @ the bottom of the screen too. I am afraid that it is just getting worse. The device functions just fine, every tap or swipe on the screen can be the last. I am looking for a good cheap device repair shop that can make this device like new. Ifixit is the official repair for the device.
cooltranier13px said:
I recently traded and got a Google Pixel 2 XL. The phone's screen is severely damaged and the front camera has broken glass all in it. There is a Crack @ the bottom of the screen too. I am afraid that it is just getting worse. The device functions just fine, every tap or swipe on the screen can be the last. I am looking for a good cheap device repair shop that can make this device like new. Ifixit is the official repair for the device.
Click to expand...
Click to collapse
just bought from ali new camera and temptered glass which cover the entire screen my camera lens will be protected i guess !!!
I pulled my screen off to fix an issue with my main speaker. In the process I messed up my digitizer display. I bought a replacement off ebay and it is garbage. Color does not look right, and not sharp.
Anyone have any success with a replacement screen/ digitzer that was resembled the original? Where did you purchase?
Thanks
ifixit.com offers origininal motorola parts