Related
Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Friends,I recently flashed my wave 2 s8530 to bada 2 and yesterday when i tried to flash it june update indian firmware(s8530 DDKF1) ,the flashing failed midway.I was getting rsrc1 erase error.I tried to flash it again still d error didn't go.After some time my phone showed "SOFTWARE UPDATE FAILED" error.Now i can't even enter the download mode.When i try,the download mode comes and after 5 sec the screen becomes blank or d software update error shoots up...I dont know what to do and I dont want to give it to the service center because i need the cell in working condition by sunday...Please help.
Try these options:
1. Make sure all necessary drivers are installed.
2. USe the correct version of multiloader to flash (flashing back from a different bada version usually has problems with multiloader v5.62 e.g. erase error).
3. Remove battery from phone for a mimumum of 10 minutes. Then insert battery again. Please borrow a fully charged battery from a friend (as yours obviously cannot be charged now).
4. Try flashing again.
Best of luck.
Here's the thing , I unlocked my bootloader and rooted my phone a while back (probably using an already outdated software , if i remembered correctly it was 2.3.3 , but i knew i followed the instructions here
http://forum.xda-developers.com/showthread.php?t=1133650)
Today, my phone asked if I wanted to update the software (like an automated software update) and i could choose to update or not and i chose yes but now , my phone won't start up for like 3 hours already . I tried turning it on but it won't turn on , i tried charging it but there isn't any lights which was supposed to be there .
So I decided to google it and i followed the instructions here
http://talk.sonyericsson.com/thread/26720
but after installing both , choosing my phone , followin the instructions on update service , it gets stuck on "it contains a modified software that cannot be updated" so decided to come back here to ask you guys what I should do .
Right now , all I want to do is for my phone to start up again , any ideas ?
edit : right now , i took out the battery , and put it back in . This time when I tried to turn it on , the vibrate is there which wasn't there initially and theres 1 flash of the green light on the side of the phone .
and also , i think its recognized by the computer because i can hear the sound notification (the same sound when you plug a USB into a computer) which wasn't there before I did the update service thingy .
edit 2 : it won't go into safemode either when i tried clicked the right and left buttons below the display (the menu and back button) and the power button after that . yes i tried reinserting the battery .
edit 3 : I'm not sure if this'll help but my phone is recognized as SEMC flash device (i checked on device manager) and theres a green colour non flashing light when i plug my phone into the pc .
http://forum.xda-developers.com/showthread.php?t=1304634
OMG
Thanks
Sorry for not searching , I tried looking for Xperia arc won't load up / start up but it didn't give me this thread .
Thanks again
edit : i thanked you too
same problem!!!
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
gadjet87 said:
Guys, I was trying to modify my phone so that applications would be saved in memory card instead of internal storage, so I rooted it and stuff.. Now it won't turn on!!! When I switch it on, it shows the SE logo and does nothing else.. I tried to enter the safemode menu (holding left and right keys when switching on, or volume down key and home key when turning on) but nothing works!!! I'm like desperate now so any help would be really appreciated!
Click to expand...
Click to collapse
Try to flash a new(er) kernel with recovery and install a new rom (your phone is ota-bricked, so if that doesn't work, search on XDA)
Sent from my LT18i using xda premium
Hi, I have a problem with my defy and I really short to deal with that. First my defy stopped on red M logo and done proceed to system start. So I go to service menu, set clear cache- cache were cleared for 30mins so I take out batery, then I set - format/factory reset. same problem, it goes without end so after batery goes off, I make McGiver style for bring pnone to life and go to boot loader, run firmware flash over RSD lite and wait......after that RSD give me this message - Phone [0000] Error verifiing code group 33 Checksums. File:0x8BAC,Phone:0x4805 . RSD do nothing, on phone were instaling. after our when I suppose this is and I take out batery from phone and try run it. Every time start boot loader with message :
Code Corrupt
Battery OK
OK to Program
Conect USB
Data Cable
I cant launch android recovery, and If i flashed firmware again a have the same and. Can you please somebody help me with that??
Thanks,
ps. sorry for my english I think is not perfect
new thing, new error mesage from RSD. he pass Checksums errors, than give me message - restarting device ( that is not happend, device were still on), afted while there is new message : Failed flashing proces. Failed plashing proces. phone [0000] Error geting subscriber unit checksum. Device API error: 0xe003003F Command : (RQRCS 0xe403203f); phone conected
result FAIL
I am really desperate.. anyone have experience with this??
Thanks for any advice.
NoDi
As I see probably nobody had this issue like I had. Tomorrow I try bring phone to seller (Vodafone), and than I have to pray for reflashing it from them. Anywhere I will post result from them after I get some, If somebody have the same problem in future like I had.
NoDi
Difrent SFB
try usuing difrent sfb f.
have similar problem at some time...
just try using another sfb and do factory reset each time
yea.. some sbf have higher or lower on img version which might prevent your phone from fully flashed.
I tried various different FW from here. Everytime the same results. Today I was bring phone to Vodafone, I wonder on verdict
you said you tried all firmware versions, can you try diffrent RSD Lite version, may be RSD lite having problem. I am using " RSD Lite 4.9.msi ".
so phone is back. In report from service were Changed bad SWAP module. In used parts were 1pcs of RF board. Anyway I brought phone back to Vodafone because he cant sign in other than 3G network, and many places in our country are sill only 2G.
Hi everyone ,
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you
Hi again
So after many test ( and break and unbreak the soft many times) by editing prop and conf files, i noticed that the ro.runmode is the command controling the boot mode.
But i don't know were is this command and if it's possibol:
- To force ro.runmode=normal?
- Or any solution to by pass runningtest3 app or to fake the result?
Thank you (any help are welcome i don't worry about bteaking the phone)
Finally the phone is fully dead ?
After many flash factory, stock and custom i decided to find the way to enter to hs-usb 9008 mode and i find,by flashing the phone with cherry honor 4 rom. And the phone rebooted in 9008 mode, than flashed the ddr and the msm8936 file with zte tool. The msm will not finish and the phone reboot in fastboot (with red, green,blue screen) than reflashed factory rom with dc unlocker the phone rebooted normal but with the same problem that i have in the first.
Second try, flashed with cherry, entred 9008 mode,reflashed with zte tool (by error used a bad msm8936 file from lenovo)
And the phone stop working not detected and black screen
Third try, desassemled the phone, removed battery find test point after many risky test,the phone boot again in 9008 mode.
Reflashed with zte tool, enter red green blue fastboot, and decided to reflash all the factory with fastboot flashall méthode to unbrick an msm8916. Fastboot finish with many failed.
The phone rebooted but black screen and blinking led with continus (red,blue, green), not detected in pc, trayed with test point and nothing
I think it's fully dead now
Sorry for all this long text but just to share expérience
Thank you
And no it's not dead ðŸ˜, find the way to boot it again in 9008 mode with shorting two test point
Here we go for other test
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
xzanium said:
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
Click to expand...
Click to collapse
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
How To Get Oeminfo
makabress said:
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
Click to expand...
Click to collapse
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
hellowbd said:
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
Click to expand...
Click to collapse
Hi , i found the oeminfo searching in google. I will try to find it again
hello
i a have the same prolem but i cant find "the service rom" too, my phone is stuck in mode 9008 i tried to do the rom by myself but witouth any succes.... i read in a post that i cant try to put the "Huawei_Honor_Cherry_L04_V100R001C900B150_India_4.4.4_EMUI_3.0_05021SLQ" who has the same structure but cannot flash phone said "bootloaderimage" fail
please anyone can help me? i am 2 months witout phone... sorry about my bad english im a spanish guy
rio-l01 test point
hi, please i can't found rio-l01 test point can you help me
rmili25 said:
hi, please i can't found rio-l01 test point can you help me
Click to expand...
Click to collapse
test point are in the left/right side of the display connector, you can use a small wire to short it
JoseBankai said:
test point are in the left/right side of the display connector, you can use a small wire to short it
Click to expand...
Click to collapse
thank you brother
please i have the same problem ( rio-l01 no service no call ) can you help me please by oeminfo file or other things
excuse me i'am bad in english
still having the same problem, no solution, try to resoldering emmc, processor, voltage are ok, everything works in other board, so the problem is still the **** mode 9800 and the vanished "service rom" (not trully vanished but every service that i call to fix this ask me for a lot of money just to fix 1 phone... not worth it..) hope somebody can explain this at least, and why is happening, maybe one day can recovery my data on thtat phone....