Hi, I have a problem with my defy and I really short to deal with that. First my defy stopped on red M logo and done proceed to system start. So I go to service menu, set clear cache- cache were cleared for 30mins so I take out batery, then I set - format/factory reset. same problem, it goes without end so after batery goes off, I make McGiver style for bring pnone to life and go to boot loader, run firmware flash over RSD lite and wait......after that RSD give me this message - Phone [0000] Error verifiing code group 33 Checksums. File:0x8BAC,Phone:0x4805 . RSD do nothing, on phone were instaling. after our when I suppose this is and I take out batery from phone and try run it. Every time start boot loader with message :
Code Corrupt
Battery OK
OK to Program
Conect USB
Data Cable
I cant launch android recovery, and If i flashed firmware again a have the same and. Can you please somebody help me with that??
Thanks,
ps. sorry for my english I think is not perfect
new thing, new error mesage from RSD. he pass Checksums errors, than give me message - restarting device ( that is not happend, device were still on), afted while there is new message : Failed flashing proces. Failed plashing proces. phone [0000] Error geting subscriber unit checksum. Device API error: 0xe003003F Command : (RQRCS 0xe403203f); phone conected
result FAIL
I am really desperate.. anyone have experience with this??
Thanks for any advice.
NoDi
As I see probably nobody had this issue like I had. Tomorrow I try bring phone to seller (Vodafone), and than I have to pray for reflashing it from them. Anywhere I will post result from them after I get some, If somebody have the same problem in future like I had.
NoDi
Difrent SFB
try usuing difrent sfb f.
have similar problem at some time...
just try using another sfb and do factory reset each time
yea.. some sbf have higher or lower on img version which might prevent your phone from fully flashed.
I tried various different FW from here. Everytime the same results. Today I was bring phone to Vodafone, I wonder on verdict
you said you tried all firmware versions, can you try diffrent RSD Lite version, may be RSD lite having problem. I am using " RSD Lite 4.9.msi ".
so phone is back. In report from service were Changed bad SWAP module. In used parts were 1pcs of RF board. Anyway I brought phone back to Vodafone because he cant sign in other than 3G network, and many places in our country are sill only 2G.
Related
Friends,I recently flashed my wave 2 s8530 to bada 2 and yesterday when i tried to flash it june update indian firmware(s8530 DDKF1) ,the flashing failed midway.I was getting rsrc1 erase error.I tried to flash it again still d error didn't go.After some time my phone showed "SOFTWARE UPDATE FAILED" error.Now i can't even enter the download mode.When i try,the download mode comes and after 5 sec the screen becomes blank or d software update error shoots up...I dont know what to do and I dont want to give it to the service center because i need the cell in working condition by sunday...Please help.
Try these options:
1. Make sure all necessary drivers are installed.
2. USe the correct version of multiloader to flash (flashing back from a different bada version usually has problems with multiloader v5.62 e.g. erase error).
3. Remove battery from phone for a mimumum of 10 minutes. Then insert battery again. Please borrow a fully charged battery from a friend (as yours obviously cannot be charged now).
4. Try flashing again.
Best of luck.
Hi guys....
Ihave make the firmware restore with Heimdall,
and after the phonestay blocked in the downloading status, I try to restart and nothing is happennend....
ever in download mode, I have enter in recovery mode, make one complet format....
After I have saw I have put the right file inside, but one bad command.....
So i have remake the firmware restore...
the phone appear good.....but after a while have began to restart, than have some lag, some freezer mode....
I have try to make another hard reset, but still have this problems......
Now I have try to install another firmware ( before i have install the Italiuan firmware the 4.4.2) now the Germany firmware.......
With this last firmware the phone is still blocked, dont appear the configuration system, just write installing application .... than have one rest.... is on loop mode
Somebody can tell me what I have to do???' Because in one Italian site have wrote me I haveto buy one PC...
Mac is no good for this kind of operation...
Excuse me for my horrible English.
Waiting your answers.....
MAx
Hello Guys
My friend ask me for get a Lineage OS to his H815 with Nougat. I agreed as I made few successful changes from stock to Lineage OS with Samsungs and older LGs (like L3 E400). But G4 is really more complicated, more than I expected . Firstly I wanted to unlock this phone with FWUL, so I download a VirtualBox emulated image with FWUL and after it boots I opened SALT program and it detects the phone. I made a basic backup and then I choosed Unlock G4 (UsU). After that some windows pop up. Last window was a pre-checking, when the bar gets to the end window closed and nothing more was happening. So after almost hour of waiting I just turned off the phone - I thought its all. After that while phone is booting I have those messages in the left top corner:
[820]-----------------------
[870]
[920] Secure boot error!
[970] Error code : 1009
[1020[ OFFICIAL !!
[1070]
[1120]-----------------------
Its booting, but only sometimes its normal boot, most starts are with bootloop, sometimes its start after 10 restarts, sometimes after 2nd restart, sometimes after plug in/plug out USB cable it starts boot normally (connecting cable only to phone, not to PC), sometimes only thing that helps is to take out the battery. I made full wipe to be sure that its not a software problem, but only thing I achived with that is fact that phone has a Nougat and now it have a Marshmallow. It is (was?) H815, but now model name is LGLS991 (?), it gets very long until it shows software version (V20g), IMEI is unknow, even when I type *#06# I get the null response.
I can get into recovery, can put phone into download mode. But i'm not able to do anything to get LOS or a least Nougat.
I've read many, many tutorials how to get G4 working properly after unsuccessful unlock, but nothing helps. What I've tried:
1. Flashing stock Nougat for H815 with LGUP, installed USB drivers, proper DLL, set com to 41, but when I trying to flash, after a 4% i get error: KDZ file is invalid. Downloaded few KDZ firmwares, dont belive that every single one is invalid, there is something wrong with LGUP or with settings, but I cant find what
2. Flashing with LG Flash Tool 2014: tried both normal flash and cse flash and always stoping in the same moment, with "Connection to server failed. Try again in a moment". Read many tutorials about this error, none was helpful in my case.
3. Flashing with LG Flash Tool v1.8.1.1023 and a TOT file, but after select of dll and tot file and press the yellow arrow I get an error: "Failed PreviousLoad()"
Tried all this methods on second computer but without a luck.
What else can I try to get this G4 working properly? Maybe try to install some rom from stock recovery? But which rom will be ok and dont get things worst?
If you need more info dont hesitate to ask. Would be very greatful for any advices .
you definitely didn't read enough... go to read again the UsU thread and as you've read the whole tutorial, you can also read the whole FAQ and the OP, because 90% of what you pointed out in your publication (which incidentally is in the wrong section) is explained there.
A quick advice: Don't try to flash any KDZ/TOT again.
Hello there!
I just bought a Razer Phone from a guy who said that it has a bad motherboard...I bought it pretty cheap and tried to revive it, because why not, i ve done this to other phones.
The phone was somehow reset, it boots until the setup wizard, where i can set the language , emergy call or maginification without problems...
The problem is that if i press " Get Started ", it popps a message like "setup wizard keeps stopping" and so on...i cant pass that screen, the message appears everytime i press "get started" button.
So, i tried flashing... The phone boots like is an unlocked one, but no fastboot/adb ?!
So, the only chance was adb sideload. I pushed different roms / factory images... Nothing.
Hardly, i found an OTA.ZIP file, and tried to sideload it. It worked till 47% ... Then, it said that "PACKAGE IS FOR CHERYL BUT EXPECTED CHERYL-CKH"... not a single rom/factory image worked like this... It loads near 50%, when the other stop right after start.
Later, i discovered i have the US carrier version cheryl-CKH ... And i cant find it's OTA...if one of you can provide me, i ll be very grateful, even buy you a beer or smth.
Thank you ! And please help me...
Edit: i also tried with EDL mode, with Qualcomm Flash Image Loader , but i dont have/know the Programmer Path & Search Path.
I'd advise to unlock the bootloader following the instructions here; make sure to unlock the critical partition as well.
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
Then flash the stock factory image of your choice from here;
https://developer.razer.com/razer-phone-dev-tools/factory-images/
When you unzip these factory images, there is a flash_all.bat file to double click and it should do it all for you.
The phone should be good to go after this. I did this recently on my razer after spending some time flashing some of the 9.0 pie GSI images and it worked great.
Hi guys,
i am trying to rescue my P10 lite after some bobo happened. I am hoping for getting some experts on leading me to the right path, delivering as much as possible background in the following lines.
Setup of my device:
- Huawei P10 Lite
-WAS-LX1A
-Firmware: WAS-LX1AC652B101 (DC Unlocker Information)
What (i guess) went wrong:
-I tried to SD-software upgrade my phone but obviously i used wrong firmware -or- some other issue during the update occured. I realized during update process that the phone restarted without it was finished (somewhere at ~50%)
-Now i can't boot, ending up with all same loops as further described
-Immediately after start of phone, i see Huawei logo and then following error message: ERROR MODE: Attention! Please update system again. Error Error NO: 11 (recovery image) & Error NO: 2 (load failed), each start ends up here.
-Recovery can't be entered, hard-reset didnt work
-Fastboot entering and sending commands is possible but with (Phone Locked, FRP Lock message) this somehow keeps me limited to what i can do?
What did i try so far to rescue:
-Apart from above obvious (fastboot/hard-reset/let battery go empty and try recharging again)
-Tried using DC-Unlocker to access some more info, didnt spend credits as i read to many bad experiences not leading to success
Desired outcome:
-I want to bring life back to the phone, no matter in what way either as stock ROM (best case) or certain custom ROMs i dont mind, as long as it usable again. In best case scenario not paying for it without guarantee to success (like DC unlocker etc.)
Do you guys can please shed some lights with a complete sad moron as i am
PS. i must say that i can do a lot of technical stuff on PC, but with android and especially with Huawei i am a complete noob, so if you refer me to some software or firmware please share link if possible? Otherwise i will of course try to find the appropiate with the hints coming from here.